Intel wireless driver not compatible HP Pavilion g6-2320tx
Hello HP Support Team ! Hope you are doing great.
I have Pavilion g6-2320Tx laptop (Product number - D5F44PA) with i5-3230m 2.6ghz processor that supports Intel WiDI technology. I downloaded latest Intel Wireless Display Software - Version4.2.19.0 from Hp website.
But setup is aborted due to below error , Can you please help me resolving the issue. I need to install this & connect my laptop to Wirelss display for presentations
Awaiting your prompt response
Hi Ashish_Sharma,
Thank you for your reply.
Here is a link to the specificaiton for your wireless card http://WLAN 802.11bgn+BT RL HMC 1x1 ROMAwww.ftgparts.com/Store/OTHER_2/689215-001 it does not list WiDi.
Here is a link to Intel Wireless Display (Intel WiDi) , please note the support resources on the right,
You maybe able to locate more information on this issue at the Intel Forum
I hope this helps.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!
Similar Messages
-
15.5.6000.1657/15.5.6.48 Intel Wireless Driver - DO NOT INSTALL with Windows 8
As the title says
15.5.6000.1657/15.5.6.48 Intel Wireless driver dated 29/Jan
Don't install it - it borked my 6300 AGN had to rollback.
DangerMouse
Current Machines : T420s/W530/X1CTProblem Solved.
This link gives a good insight into the solution
http://www.sadjad.net/blog/2012/11/28/windows-8-shared-printer-driver/ -
T420 (4236) - Lenovo Update Retreiver is missing the Intel Wireless Driver Package
Hi,
I'm using Lenovo Update Retreiver with ThinInstaller. We got our new model T420 and got everything except the driver for Intel Wireless Driver.
The new version Power Manager 3.62 is also fail. Missing information and won't install.
Could you please add it!After seeing the above comment, I again tried to update Power Manager on my 3 ThinkPads, without success.
On my R500 running Windows 7 professional with SP1, Update Retriever (version 4.02.0011) still fails to download the package for Power Manager version 3.62. Of interest here is that when you try to list the details for this package, you still get a blank screen. If you try to bypass Update retriever, and go with System Update (version 4.01.0015) directly, the update still fails with message "1 package did not download".
On an R500, running Windows XP SP3, Power Manager (version 1.99j) still fails with similar messages. Update Retriever (version 4.02.0011) still reports "1 update failed to be downloaded" and System Update (version 3.15.0017) still reports "1 package did not download".
On an R61, running Windows XP SP3, Power Manager (version 1.99j) still fails with similar messages. Update Retriever (version 4.02.0011) still reports "1 update failed to be downloaded" and System Update (version 3.15.0017) still reports "1 package did not download".
I know that I can update these packages manually, but the point is that System Update and Update Retriever still cannot process this update. I use the update logs within System Update to keep track of what has been installed. Doing the update manually defeats that purpose.
ThinkPad R61 8932-CTO T8300 2.40 Ghz 3GB RAM Win XP
ThinkPad R500 2714-CTO P8600 2.40 Ghz 3GB RAM Win XP; Two ThinkPad R500's 2714-CTO T9600 2.80 Ghz 4GB RAM Win 7
ThinkPad T500 2241-DB9 T9600 2.80 Ghz 4GB RAM Win 7
ThinkCenter A63 5237-CTO 3GB Ram Win XP; A21m and a pair of 380XD's -
Nothing seems to work, not even dragging files over. Is the drive not compatible? Am working on a new Mac Book, its not a problem on my older IMAC?
There are two scenarios in which GoFlex drives are supported for use with a Mac. When you connect a GoFlex drive to a Mac, you will be presented with a utility to configure the drive for use. First, if you want to use your GoFlex drive solely with a Mac, the utility will reformat the drive into the HFS+ format, which allows you to use the drive with Time Machine or the included Memeo Premium backup software for Mac. If you would like to be able to "shuttle" data back and forth between a Mac and a PC, a special driver needs to be installed onto the Mac that allows it to access a Windows-formatted drive (i.e. NTFS). Time Machine will not work in this case, nor will Memeo Premium software for Mac. However, if you want your GoFlex solution to also work with TimeMachine, the drive will need to be reformatted to HFS+ journaled.
source: GoFlex Frequently Asked Questions -
Wireless driver not working on hp 4540s after system move
Hi there,
I have moved my arch linux system from HP probook 4520s to model 4540s and since then I cannot get wifi working by any reasonable means no metter what I modprobe it wifi is alwais down:
my lsmod:
Module Size Used by
xfs 666515 0
exportfs 3005 1 xfs
jfs 161905 0
isofs 28679 1
fuse 60090 3
tun 12040 2
dm_mod 60338 2
snd_hda_codec_hdmi 21248 1
i915 388194 3
snd_hda_codec_idt 47704 1
radeon 781081 0
ttm 46507 1 radeon
uvcvideo 60829 0
coretemp 4702 0
videobuf2_vmalloc 1896 1 uvcvideo
videobuf2_memops 1594 1 videobuf2_vmalloc
crc32c_intel 1487 0
videobuf2_core 18103 1 uvcvideo
i2c_algo_bit 4615 2 i915,radeon
drm_kms_helper 29203 2 i915,radeon
videodev 73819 1 uvcvideo
joydev 7695 0
hp_wmi 6602 0
sparse_keymap 2532 1 hp_wmi
aesni_intel 9101 0
r8169 42786 0
mcs7830 5195 0
acpi_cpufreq 5141 0
media 8321 2 uvcvideo,videodev
snd_hda_intel 20208 3
aes_i586 6940 1 aesni_intel
aes_generic 26054 2 aesni_intel,aes_i586
snd_hda_codec 80733 3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel
cryptd 7357 1 aesni_intel
usbnet 13158 1 mcs7830
pcspkr 1455 0
microcode 8825 0
jmb38x_ms 7225 0
snd_hwdep 4746 1 snd_hda_codec
mii 3439 3 r8169,mcs7830,usbnet
drm 170883 6 ttm,i915,drm_kms_helper,radeon
snd_pcm 61237 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
i2c_core 16653 6 drm,i915,drm_kms_helper,i2c_algo_bit,radeon,videodev
memstick 5616 1 jmb38x_ms
mperf 1023 1 acpi_cpufreq
iTCO_wdt 10705 0
container 1929 0
battery 5085 0
thermal 6563 0
video 9883 1 i915
wmi 7259 1 hp_wmi
psmouse 70891 0
serio_raw 3709 0
iTCO_vendor_support 1545 1 iTCO_wdt
snd_page_alloc 5869 2 snd_pcm,snd_hda_intel
processor 23783 5 acpi_cpufreq
ac 1796 0
snd_timer 14902 1 snd_pcm
snd 44426 13 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_idt,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore 4378 1 snd
button 3614 1 i915
hp_accel 15220 0
lis3lv02d 8969 1 hp_accel
mei 27671 0
input_polldev 2142 1 lis3lv02d
intel_agp 8752 1 i915
intel_gtt 11229 3 i915,intel_agp
agpgart 21967 4 drm,ttm,intel_agp,intel_gtt
evdev 7630 16
rt2800pci 7993 0
rt2800lib 39307 1 rt2800pci
rt2x00pci 4255 1 rt2800pci
rt2x00lib 31844 3 rt2x00pci,rt2800lib,rt2800pci
eeprom_93cx6 1707 1 rt2800pci
mac80211 341172 3 rt2x00lib,rt2x00pci,rt2800lib
cfg80211 147461 2 mac80211,rt2x00lib
rfkill 12568 3 cfg80211,hp_wmi
crc_ccitt 1095 1 rt2800lib
autofs4 19415 2
ext4 385248 2
crc16 1091 1 ext4
jbd2 62437 1 ext4
mbcache 4345 1 ext4
usbhid 31733 0
hid 67113 1 usbhid
sr_mod 13180 1
sd_mod 26959 5
cdrom 30472 1 sr_mod
ahci 17913 5
libahci 16779 1 ahci
libata 146119 2 ahci,libahci
scsi_mod 112573 3 libata,sd_mod,sr_mod
sdhci_pci 8877 0
ehci_hcd 35926 0
xhci_hcd 71768 0
sdhci 20618 1 sdhci_pci
mmc_core 72774 2 sdhci,sdhci_pci
usbcore 123297 7 uvcvideo,mcs7830,ehci_hcd,usbhid,usbnet,xhci_hcd
usb_common 622 1 usbcore
my dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 3.4.5-424.1-bfs (mulan@HP4520sNotebook) (gcc version 4.7.1 (GCC) ) #1 SMP PREEMPT Mon Jul 23 04:23:36 CEST 2012
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
[ 0.000000] BIOS-e820: 0000000020200000 - 0000000040004000 (usable)
[ 0.000000] BIOS-e820: 0000000040004000 - 0000000040005000 (reserved)
[ 0.000000] BIOS-e820: 0000000040005000 - 00000000a8cf2000 (usable)
[ 0.000000] BIOS-e820: 00000000a8cf2000 - 00000000a9ebd000 (reserved)
[ 0.000000] BIOS-e820: 00000000a9ebd000 - 00000000a9fbd000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000a9fbd000 - 00000000a9fff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000a9fff000 - 00000000aa000000 (usable)
[ 0.000000] BIOS-e820: 00000000aa000000 - 00000000af200000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000014fe00000 (usable)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.7 present.
[ 0.000000] DMI: Hewlett-Packard HP ProBook 4540s/17F6, BIOS 68IRR Ver. F.32 11/06/2012
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0xaa000 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FF800000 mask FFF800000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FE0000000 write-back
[ 0.000000] 3 base 0A0000000 mask FF8000000 write-back
[ 0.000000] 4 base 0A8000000 mask FFE000000 write-back
[ 0.000000] 5 base 0AA000000 mask FFF000000 uncachable
[ 0.000000] 6 base 100000000 mask FC0000000 write-back
[ 0.000000] 7 base 140000000 mask FE0000000 write-back
[ 0.000000] 8 base 150000000 mask FF0000000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[ 0.000000] RAMDISK: 379d8000 - 37ce4000
[ 0.000000] Allocated new RAMDISK: 374f2000 - 377fd8bc
[ 0.000000] Move RAMDISK from 00000000379d8000 - 0000000037ce38bb to 374f2000 - 377fd8bb
[ 0.000000] ACPI: RSDP 000f2f10 00024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT a9ffe120 00084 (v01 HPQOEM SLIC-MPC 0000000F 01000013)
[ 0.000000] ACPI: FACP a9ffc000 0010C (v05 HPQOEM 17F6 0000000F HP 00000001)
[ 0.000000] ACPI: DSDT a9fd5000 2116E (v02 HPQOEM 17F6 00000001 INTL 20110112)
[ 0.000000] ACPI: FACS a9eb2000 00040
[ 0.000000] ACPI: HPET a9ffb000 00038 (v01 HPQOEM 17F6 00000001 HP 00000001)
[ 0.000000] ACPI: APIC a9ffa000 000BC (v01 HPQOEM 17F6 00000001 HP 00000001)
[ 0.000000] ACPI: MCFG a9ff9000 0003C (v01 HPQOEM 17F6 00000001 HP 00000001)
[ 0.000000] ACPI: ASF! a9ff8000 000A5 (v32 HPQOEM 17F6 00000001 HP 00000001)
[ 0.000000] ACPI: SSDT a9fd2000 002CA (v01 HPQOEM SataAhci 00001000 INTL 20110112)
[ 0.000000] ACPI: SSDT a9fd1000 0048A (v01 HPQOEM PtidDevc 00001000 INTL 20110112)
[ 0.000000] ACPI: FPDT a9fcf000 00044 (v01 HPQOEM 17F6 00000001 HP 00000001)
[ 0.000000] ACPI: BGRT a9fce000 00038 (v00 HPQOEM 17F6 00000001 HP 00000001)
[ 0.000000] ACPI: SSDT a9fcd000 009B6 (v01 PmRef Cpu0Ist 00003000 INTL 20110112)
[ 0.000000] ACPI: SSDT a9fcc000 00AAD (v01 PmRef CpuPm 00003000 INTL 20110112)
[ 0.000000] ACPI: SSDT a9fcb000 00B50 (v01 SgRef SgTabl 00001000 INTL 20110112)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1832MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x000aa000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x00020000
[ 0.000000] 0: 0x00020200 -> 0x00040004
[ 0.000000] 0: 0x00040005 -> 0x000a8cf2
[ 0.000000] 0: 0x000a9fff -> 0x000aa000
[ 0.000000] On node 0 totalpages: 690815
[ 0.000000] free_area_init_node: node 0, pgdat c150c140, node_mem_map f5fb1200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3949 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 220974 pages, LIFO batch:31
[ 0.000000] HighMem zone: 3665 pages used for memmap
[ 0.000000] HighMem zone: 460451 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] Allocating PCI resources starting at af200000 (gap: af200000:30e00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f5f3d000 s30272 r0 d22976 u53248
[ 0.000000] pcpu-alloc: s30272 r0 d22976 u53248 alloc=13*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 685374
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-bfs root=UUID=4d97ab7a-4550-4ad8-a01f-0ba29eadc523 ro resume=/dev/sda5 pcie_aspm=force
[ 0.000000] PCIe ASPM is forcibly enabled
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] allocated 5570432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:000aa000)
[ 0.000000] Memory: 2724980k/2785280k available (3748k kernel code, 38280k reserved, 1458k data, 524k init, 1856464k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc1516000 - 0xc1599000 ( 524 kB)
[ 0.000000] .data : 0xc13a9177 - 0xc1515b40 (1458 kB)
[ 0.000000] .text : 0xc1000000 - 0xc13a9177 (3748 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] NR_IRQS:2304 nr_irqs:744 16
[ 0.000000] CPU 0 irqstacks, hard=f540a000 soft=f540c000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.003333] Detected 2594.268 MHz processor.
[ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 5190.72 BogoMIPS (lpj=8647560)
[ 0.000004] pid_max: default: 32768 minimum: 301
[ 0.000021] Security Framework initialized
[ 0.000025] AppArmor: AppArmor disabled by boot time parameter
[ 0.000035] Mount-cache hash table entries: 512
[ 0.000171] Initializing cgroup subsys memory
[ 0.000176] Initializing cgroup subsys devices
[ 0.000178] Initializing cgroup subsys freezer
[ 0.000179] Initializing cgroup subsys net_cls
[ 0.000181] Initializing cgroup subsys blkio
[ 0.000203] CPU: Physical Processor ID: 0
[ 0.000204] CPU: Processor Core ID: 0
[ 0.000208] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.000209] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.000897] mce: CPU supports 7 MCE banks
[ 0.000907] CPU0: Thermal monitoring enabled (TM1)
[ 0.000912] using mwait in idle threads.
[ 0.001669] ACPI: Core revision 20120320
[ 0.060127] ftrace: allocating 16715 entries in 33 pages
[ 0.067784] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.068208] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.101152] CPU0: Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz stepping 09
[ 0.206628] Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver.
[ 0.206633] ... version: 3
[ 0.206634] ... bit width: 48
[ 0.206635] ... generic registers: 4
[ 0.206636] ... value mask: 0000ffffffffffff
[ 0.206637] ... max period: 000000007fffffff
[ 0.206638] ... fixed-purpose events: 3
[ 0.206639] ... event mask: 000000070000000f
[ 0.206748] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.226603] CPU 1 irqstacks, hard=f5562000 soft=f5564000
[ 0.226606] Booting Node 0, Processors #1
[ 0.236841] Initializing CPU#1
[ 0.240418] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.240484] CPU 2 irqstacks, hard=f55a2000 soft=f55a4000
[ 0.240485] #2
[ 0.250779] Initializing CPU#2
[ 0.254389] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.254442] CPU 3 irqstacks, hard=f55b0000 soft=f55b2000
[ 0.254444] #3
[ 0.264737] Initializing CPU#3
[ 0.268347] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.268367] Brought up 4 CPUs
[ 0.268368] Total of 4 processors activated (20762.90 BogoMIPS).
[ 0.271569] devtmpfs: initialized
[ 0.271707] PM: Registering ACPI NVS region [mem 0xa9ebd000-0xa9fbcfff] (1048576 bytes)
[ 0.272405] NET: Registered protocol family 16
[ 0.272510] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.272512] ACPI: bus type pci registered
[ 0.272560] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.272563] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.272564] PCI: Using MMCONFIG for extended config space
[ 0.272565] PCI: Using configuration type 1 for base access
[ 0.272661] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.272662] mtrr: probably your BIOS does not setup all CPUs.
[ 0.272663] mtrr: corrected configuration.
[ 0.272972] bio: create slab <bio-0> at 0
[ 0.273008] ACPI: Added _OSI(Module Device)
[ 0.273009] ACPI: Added _OSI(Processor Device)
[ 0.273010] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.273012] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.274547] ACPI: EC: Look up EC in DSDT
[ 0.276338] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.287685] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.298171] ACPI: SSDT a9eb0018 00861 (v01 PmRef Cpu0Cst 00003001 INTL 20110112)
[ 0.298561] ACPI: Dynamic OEM Table Load:
[ 0.298563] ACPI: SSDT (null) 00861 (v01 PmRef Cpu0Cst 00003001 INTL 20110112)
[ 0.298735] ACPI: SSDT a9eb1a98 00303 (v01 PmRef ApIst 00003000 INTL 20110112)
[ 0.299145] ACPI: Dynamic OEM Table Load:
[ 0.299147] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20110112)
[ 0.301064] ACPI: SSDT a9eafd98 00119 (v01 PmRef ApCst 00003000 INTL 20110112)
[ 0.301447] ACPI: Dynamic OEM Table Load:
[ 0.301449] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20110112)
[ 1.783250] ACPI: Interpreter enabled
[ 1.783259] ACPI: (supports S0 S3 S4 S5)
[ 1.783275] ACPI: Using IOAPIC for interrupt routing
[ 1.784278] ACPI: Power Resource [APPR] (off)
[ 1.787223] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 1.787379] ACPI: No dock devices found.
[ 1.787384] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.787878] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 1.788268] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 1.788270] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 1.788272] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 1.788274] pci_root PNP0A08:00: host bridge window [mem 0xaf200000-0xdfffffff]
[ 1.788276] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfedfffff]
[ 1.788278] pci_root PNP0A08:00: host bridge window [mem 0xfee01000-0xffffffff]
[ 1.788306] PCI host bridge to bus 0000:00
[ 1.788307] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 1.788309] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 1.788311] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 1.788312] pci_bus 0000:00: root bus resource [mem 0xaf200000-0xdfffffff]
[ 1.788314] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff]
[ 1.788316] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff]
[ 1.788323] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 1.788356] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 1.788384] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.788403] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 1.788413] pci 0000:00:02.0: reg 10: [mem 0xd0000000-0xd03fffff 64bit]
[ 1.788419] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 1.788424] pci 0000:00:02.0: reg 20: [io 0x4000-0x403f]
[ 1.788473] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 1.788494] pci 0000:00:14.0: reg 10: [mem 0xd0a00000-0xd0a0ffff 64bit]
[ 1.788565] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 1.788587] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 1.788610] pci 0000:00:16.0: reg 10: [mem 0xd0a14000-0xd0a1400f 64bit]
[ 1.788686] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.788719] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 1.788739] pci 0000:00:1a.0: reg 10: [mem 0xd0a19000-0xd0a193ff]
[ 1.788830] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 1.788856] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 1.788870] pci 0000:00:1b.0: reg 10: [mem 0xd0a10000-0xd0a13fff 64bit]
[ 1.788939] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.788960] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 1.789039] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.789065] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 1.789143] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 1.789168] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
[ 1.789246] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 1.789272] pci 0000:00:1c.5: [8086:1e1a] type 01 class 0x060400
[ 1.789351] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 1.789381] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 1.789401] pci 0000:00:1d.0: reg 10: [mem 0xd0a18000-0xd0a183ff]
[ 1.789491] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.789516] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[ 1.789640] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 1.789659] pci 0000:00:1f.2: reg 10: [io 0x4068-0x406f]
[ 1.789667] pci 0000:00:1f.2: reg 14: [io 0x4074-0x4077]
[ 1.789675] pci 0000:00:1f.2: reg 18: [io 0x4060-0x4067]
[ 1.789683] pci 0000:00:1f.2: reg 1c: [io 0x4070-0x4073]
[ 1.789691] pci 0000:00:1f.2: reg 20: [io 0x4040-0x405f]
[ 1.789699] pci 0000:00:1f.2: reg 24: [mem 0xd0a17000-0xd0a177ff]
[ 1.789745] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.789787] pci 0000:01:00.0: [1002:6841] type 00 class 0x030000
[ 1.789802] pci 0000:01:00.0: reg 10: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 1.789813] pci 0000:01:00.0: reg 18: [mem 0xd0900000-0xd091ffff 64bit]
[ 1.789821] pci 0000:01:00.0: reg 20: [io 0x3000-0x30ff]
[ 1.789835] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[ 1.789870] pci 0000:01:00.0: supports D1 D2
[ 1.794820] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.794825] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 1.794830] pci 0000:00:01.0: bridge window [mem 0xd0900000-0xd09fffff]
[ 1.794836] pci 0000:00:01.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
[ 1.794902] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 1.794908] pci 0000:00:1c.0: bridge window [mem 0xd0800000-0xd08fffff]
[ 1.794983] pci 0000:03:00.0: [197b:2392] type 00 class 0x088000
[ 1.795010] pci 0000:03:00.0: reg 10: [mem 0xd0703000-0xd07030ff]
[ 1.795124] pci 0000:03:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
[ 1.795277] pci 0000:03:00.2: [197b:2391] type 00 class 0x080501
[ 1.795304] pci 0000:03:00.2: reg 10: [mem 0xd0702000-0xd07020ff]
[ 1.795566] pci 0000:03:00.3: [197b:2393] type 00 class 0x088000
[ 1.795593] pci 0000:03:00.3: reg 10: [mem 0xd0701000-0xd07010ff]
[ 1.801508] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[ 1.801529] pci 0000:00:1c.2: bridge window [mem 0xd0700000-0xd07fffff]
[ 1.801605] pci 0000:04:00.0: [1814:3290] type 00 class 0x028000
[ 1.801624] pci 0000:04:00.0: reg 10: [mem 0xd0610000-0xd061ffff]
[ 1.801763] pci 0000:04:00.0: PME# supported from D0 D3hot
[ 1.801811] pci 0000:04:00.1: [1814:3298] type 00 class 0x0d1100
[ 1.801831] pci 0000:04:00.1: reg 10: [mem 0xd0600000-0xd060ffff]
[ 1.801970] pci 0000:04:00.1: supports D1
[ 1.801971] pci 0000:04:00.1: PME# supported from D0 D1 D3hot
[ 1.808178] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[ 1.808185] pci 0000:00:1c.3: bridge window [mem 0xd0600000-0xd06fffff]
[ 1.808255] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[ 1.808275] pci 0000:05:00.0: reg 10: [io 0x2000-0x20ff]
[ 1.808309] pci 0000:05:00.0: reg 18: [mem 0xd0404000-0xd0404fff 64bit pref]
[ 1.808331] pci 0000:05:00.0: reg 20: [mem 0xd0400000-0xd0403fff 64bit pref]
[ 1.808422] pci 0000:05:00.0: supports D1 D2
[ 1.808423] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.814790] pci 0000:00:1c.5: PCI bridge to [bus 05-05]
[ 1.814798] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 1.814805] pci 0000:00:1c.5: bridge window [mem 0xd0500000-0xd05fffff]
[ 1.814817] pci 0000:00:1c.5: bridge window [mem 0xd0400000-0xd04fffff 64bit pref]
[ 1.814853] pci_bus 0000:00: on NUMA node 0
[ 1.814856] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.814983] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 1.815033] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 1.815058] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 1.815093] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 1.815121] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 1.815429] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 1.816231] pci0000:00: ACPI _OSC control (0x1d) granted
[ 1.820098] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 1.820131] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 1.820161] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 1.820191] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 1.820221] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 1.820251] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.820281] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 1.820313] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.820364] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.820370] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 1.820372] vgaarb: loaded
[ 1.820373] vgaarb: bridge control possible 0000:01:00.0
[ 1.820374] vgaarb: no bridge control possible 0000:00:02.0
[ 1.820399] PCI: Using ACPI for IRQ routing
[ 1.826732] PCI: pci_cache_line_size set to 64 bytes
[ 1.826819] reserve RAM buffer: 000000000009dc00 - 000000000009ffff
[ 1.826821] reserve RAM buffer: 0000000040004000 - 0000000043ffffff
[ 1.826823] reserve RAM buffer: 00000000a8cf2000 - 00000000abffffff
[ 1.826824] reserve RAM buffer: 00000000aa000000 - 00000000abffffff
[ 1.826890] NetLabel: Initializing
[ 1.826891] NetLabel: domain hash size = 128
[ 1.826892] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.826901] NetLabel: unlabeled traffic allowed by default
[ 1.826928] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.826933] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.828944] Switching to clocksource hpet
[ 1.833120] pnp: PnP ACPI init
[ 1.833131] ACPI: bus type pnp registered
[ 1.833375] pnp 00:00: [bus 00-3e]
[ 1.833377] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 1.833379] pnp 00:00: [io 0x0cf8-0x0cff]
[ 1.833380] pnp 00:00: [io 0x0d00-0xffff window]
[ 1.833382] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 1.833384] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 1.833385] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 1.833387] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 1.833388] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 1.833390] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 1.833391] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 1.833393] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 1.833394] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 1.833396] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 1.833397] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 1.833399] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 1.833400] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 1.833402] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 1.833403] pnp 00:00: [mem 0xaf200000-0xdfffffff window]
[ 1.833405] pnp 00:00: [mem 0xf0000000-0xfedfffff window]
[ 1.833406] pnp 00:00: [mem 0xfee01000-0xffffffff window]
[ 1.833454] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 1.833518] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 1.833519] pnp 00:01: [mem 0xfed10000-0xfed17fff]
[ 1.833521] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 1.833522] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 1.833524] pnp 00:01: [mem 0x00000000-0xffffffff disabled]
[ 1.833525] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 1.833526] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 1.833528] pnp 00:01: [mem 0xfed90000-0xfed93fff]
[ 1.833529] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
[ 1.833531] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[ 1.833563] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.833565] system 00:01: [mem 0xfed10000-0xfed17fff] could not be reserved
[ 1.833567] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.833569] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.833571] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.833573] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.833575] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
[ 1.833576] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 1.833578] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.833581] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.833684] pnp 00:02: [io 0x0000-0x001f]
[ 1.833685] pnp 00:02: [io 0x0081-0x0091]
[ 1.833687] pnp 00:02: [io 0x0093-0x009f]
[ 1.833688] pnp 00:02: [io 0x00c0-0x00df]
[ 1.833689] pnp 00:02: [dma 4]
[ 1.833714] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.833721] pnp 00:03: [mem 0xff000000-0xffffffff]
[ 1.833745] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 1.833764] pnp 00:04: [io 0xfe00-0xfe0f]
[ 1.833765] pnp 00:04: [io 0xfe80-0xfe8f]
[ 1.833766] pnp 00:04: [mem 0xfed40000-0xfed44fff]
[ 1.833800] system 00:04: [io 0xfe00-0xfe0f] has been reserved
[ 1.833802] system 00:04: [io 0xfe80-0xfe8f] has been reserved
[ 1.833804] system 00:04: [mem 0xfed40000-0xfed44fff] has been reserved
[ 1.833806] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.833865] pnp 00:05: [mem 0xfed00000-0xfed003ff]
[ 1.833890] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.833897] pnp 00:06: [io 0x00f0]
[ 1.833905] pnp 00:06: [irq 13]
[ 1.833930] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.833937] pnp 00:07: [io 0x002e-0x002f]
[ 1.833938] pnp 00:07: [io 0x004e-0x004f]
[ 1.833940] pnp 00:07: [io 0x0061]
[ 1.833941] pnp 00:07: [io 0x0063]
[ 1.833942] pnp 00:07: [io 0x0065]
[ 1.833943] pnp 00:07: [io 0x0067]
[ 1.833944] pnp 00:07: [io 0x0070]
[ 1.833946] pnp 00:07: [io 0x0080]
[ 1.833947] pnp 00:07: [io 0x0092]
[ 1.833948] pnp 00:07: [io 0x00b2-0x00b3]
[ 1.833949] pnp 00:07: [io 0x0200-0x027f]
[ 1.833951] pnp 00:07: [io 0x1000-0x100f]
[ 1.833952] pnp 00:07: [io 0xffff]
[ 1.833953] pnp 00:07: [io 0xffff]
[ 1.833954] pnp 00:07: [io 0x0400-0x047f]
[ 1.833956] pnp 00:07: [io 0x0500-0x057f]
[ 1.833957] pnp 00:07: [io 0xef80-0xef9f]
[ 1.833994] system 00:07: [io 0x0200-0x027f] has been reserved
[ 1.833996] system 00:07: [io 0x1000-0x100f] has been reserved
[ 1.833998] system 00:07: [io 0xffff] has been reserved
[ 1.834000] system 00:07: [io 0xffff] has been reserved
[ 1.834001] system 00:07: [io 0x0400-0x047f] has been reserved
[ 1.834003] system 00:07: [io 0x0500-0x057f] has been reserved
[ 1.834005] system 00:07: [io 0xef80-0xef9f] has been reserved
[ 1.834007] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.834012] pnp 00:08: [io 0x0070-0x0077]
[ 1.834017] pnp 00:08: [irq 8]
[ 1.834042] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.834111] pnp 00:09: [io 0x0060]
[ 1.834112] pnp 00:09: [io 0x0064]
[ 1.834117] pnp 00:09: [irq 1]
[ 1.834143] pnp 00:09: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[ 1.834151] pnp 00:0a: [irq 12]
[ 1.834177] pnp 00:0a: Plug and Play ACPI device, IDs SYN0197 SYN0100 SYN0002 PNP0f13 (active)
[ 1.834321] pnp 00:0b: [irq 23]
[ 1.834351] pnp 00:0b: Plug and Play ACPI device, IDs HPQ6000 (active)
[ 1.834378] pnp 00:0c: [mem 0x20000000-0x201fffff]
[ 1.834379] pnp 00:0c: [mem 0x40004000-0x40004fff]
[ 1.834418] system 00:0c: [mem 0x20000000-0x201fffff] has been reserved
[ 1.834420] system 00:0c: [mem 0x40004000-0x40004fff] has been reserved
[ 1.834422] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.834551] pnp: PnP ACPI: found 13 devices
[ 1.834552] ACPI: ACPI bus type pnp unregistered
[ 1.870222] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 1.870225] pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[ 1.870269] pci 0000:00:1c.2: BAR 15: assigned [mem 0xaf200000-0xaf2fffff pref]
[ 1.870271] pci 0000:01:00.0: BAR 6: assigned [mem 0xd0920000-0xd093ffff pref]
[ 1.870274] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.870276] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 1.870278] pci 0000:00:01.0: bridge window [mem 0xd0900000-0xd09fffff]
[ 1.870281] pci 0000:00:01.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
[ 1.870284] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 1.870290] pci 0000:00:1c.0: bridge window [mem 0xd0800000-0xd08fffff]
[ 1.870299] pci 0000:03:00.0: BAR 6: assigned [mem 0xaf200000-0xaf20ffff pref]
[ 1.870300] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[ 1.870306] pci 0000:00:1c.2: bridge window [mem 0xd0700000-0xd07fffff]
[ 1.870310] pci 0000:00:1c.2: bridge window [mem 0xaf200000-0xaf2fffff pref]
[ 1.870316] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[ 1.870322] pci 0000:00:1c.3: bridge window [mem 0xd0600000-0xd06fffff]
[ 1.870330] pci 0000:00:1c.5: PCI bridge to [bus 05-05]
[ 1.870333] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 1.870338] pci 0000:00:1c.5: bridge window [mem 0xd0500000-0xd05fffff]
[ 1.870343] pci 0000:00:1c.5: bridge window [mem 0xd0400000-0xd04fffff 64bit pref]
[ 1.870385] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.870387] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.870389] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.870390] pci_bus 0000:00: resource 7 [mem 0xaf200000-0xdfffffff]
[ 1.870392] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff]
[ 1.870394] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff]
[ 1.870395] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 1.870397] pci_bus 0000:01: resource 1 [mem 0xd0900000-0xd09fffff]
[ 1.870399] pci_bus 0000:01: resource 2 [mem 0xb0000000-0xbfffffff 64bit pref]
[ 1.870401] pci_bus 0000:02: resource 1 [mem 0xd0800000-0xd08fffff]
[ 1.870402] pci_bus 0000:03: resource 1 [mem 0xd0700000-0xd07fffff]
[ 1.870404] pci_bus 0000:03: resource 2 [mem 0xaf200000-0xaf2fffff pref]
[ 1.870406] pci_bus 0000:04: resource 1 [mem 0xd0600000-0xd06fffff]
[ 1.870408] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
[ 1.870409] pci_bus 0000:05: resource 1 [mem 0xd0500000-0xd05fffff]
[ 1.870411] pci_bus 0000:05: resource 2 [mem 0xd0400000-0xd04fffff 64bit pref]
[ 1.870439] NET: Registered protocol family 2
[ 1.870476] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 1.870562] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.870755] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.870852] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.870854] TCP: reno registered
[ 1.870856] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 1.870860] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 1.870903] NET: Registered protocol family 1
[ 1.870912] pci 0000:00:02.0: Boot video device
[ 1.870920] pci 0000:00:14.0: enabling device (0000 -> 0002)
[ 1.870924] pci 0000:00:14.0: can't derive routing for PCI INT A
[ 1.870925] pci 0000:00:14.0: PCI INT A: no GSI - using ISA IRQ 10
[ 1.870967] pci 0000:00:14.0: can't derive routing for PCI INT A
[ 1.871048] PCI: CLS 64 bytes, default 64
[ 1.871077] Unpacking initramfs...
[ 1.925882] Freeing initrd memory: 3120k freed
[ 1.926510] apm: BIOS not found.
[ 1.926640] audit: initializing netlink socket (disabled)
[ 1.926648] type=2000 audit(1369492237.776:1): initialized
[ 1.926844] highmem bounce pool size: 64 pages
[ 1.926848] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.927953] VFS: Disk quotas dquot_6.5.2
[ 1.927987] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.928056] msgmni has been set to 1702
[ 1.928157] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.928170] io scheduler noop registered
[ 1.928172] io scheduler deadline registered
[ 1.928177] io scheduler cfq registered (default)
[ 1.928252] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 1.928335] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 1.928434] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 1.928531] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 1.928627] pcieport 0000:00:1c.5: irq 44 for MSI/MSI-X
[ 1.928699] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 1.928701] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 1.928704] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 1.928720] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 1.928724] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 1.928740] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 1.928741] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 1.928743] pci 0000:03:00.2: Signaling PME through PCIe PME interrupt
[ 1.928744] pci 0000:03:00.3: Signaling PME through PCIe PME interrupt
[ 1.928749] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 1.928763] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 1.928764] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 1.928766] pci 0000:04:00.1: Signaling PME through PCIe PME interrupt
[ 1.928770] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 1.928784] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[ 1.928785] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[ 1.928790] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[ 1.928861] intel_idle: does not run on family 6 model 58
[ 1.928899] GHES: HEST is not enabled!
[ 1.928907] isapnp: Scanning for PnP cards...
[ 2.285823] isapnp: No Plug & Play device found
[ 2.285853] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 2.286325] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.288061] i8042: Detected active multiplexing controller, rev 1.1
[ 2.288886] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.288905] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 2.288919] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 2.288934] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 2.288947] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 2.289004] mousedev: PS/2 mouse device common for all mice
[ 2.289058] rtc_cmos 00:08: RTC can wake from S4
[ 2.289171] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 2.289198] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 2.289210] cpuidle: using governor ladder
[ 2.289211] cpuidle: using governor menu
[ 2.289309] TCP: cubic registered
[ 2.289377] NET: Registered protocol family 10
[ 2.289506] NET: Registered protocol family 17
[ 2.289510] Registering the dns_resolver key type
[ 2.289537] Using IPI No-Shortcut mode
[ 2.289589] PM: Checking hibernation image partition /dev/sda5
[ 2.312918] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.325875] PM: Hibernation image not present or could not be loaded.
[ 2.325885] registered taskstats version 1
[ 2.326373] rtc_cmos 00:08: setting system clock to 2013-05-25 14:30:38 UTC (1369492238)
[ 2.326410] Initializing network drop monitor service
[ 2.326456] Freeing unused kernel memory: 524k freed
[ 2.326569] Write protecting the kernel text: 3752k
[ 2.326586] Write protecting the kernel read-only data: 1112k
[ 2.326588] BFS CPU scheduler v0.424 by Con Kolivas.
[ 2.331282] systemd-udevd[46]: starting version 203
[ 2.350840] usbcore: registered new interface driver usbfs
[ 2.350862] usbcore: registered new interface driver hub
[ 2.350898] usbcore: registered new device driver usb
[ 2.351440] sdhci: Secure Digital Host Controller Interface driver
[ 2.351442] sdhci: Copyright(c) Pierre Ossman
[ 2.351564] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[ 2.351567] xhci_hcd 0000:00:14.0: PCI INT A: no GSI - using ISA IRQ 10
[ 2.351601] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 2.351606] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.351619] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.351629] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 2.351731] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 2.351748] xhci_hcd 0000:00:14.0: irq 10, io mem 0xd0a00000
[ 2.351752] sdhci-pci 0000:03:00.0: SDHCI controller found [197b:2392] (rev 30)
[ 2.351836] xhci_hcd 0000:00:14.0: irq 45 for MSI/MSI-X
[ 2.351874] Registered led device: mmc0::
[ 2.351969] xHCI xhci_add_endpoint called for root hub
[ 2.351972] xHCI xhci_check_bandwidth called for root hub
[ 2.352001] hub 1-0:1.0: USB hub found
[ 2.352009] hub 1-0:1.0: 4 ports detected
[ 2.352081] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.352088] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 2.352182] xHCI xhci_add_endpoint called for root hub
[ 2.352184] xHCI xhci_check_bandwidth called for root hub
[ 2.352211] hub 2-0:1.0: USB hub found
[ 2.352218] hub 2-0:1.0: 4 ports detected
[ 2.352919] mmc0: SDHCI controller on PCI [0000:03:00.0] using DMA
[ 2.352937] sdhci-pci 0000:03:00.2: SDHCI controller found [197b:2391] (rev 30)
[ 2.352957] sdhci-pci 0000:03:00.2: Refusing to bind to secondary interface.
[ 2.353441] SCSI subsystem initialized
[ 2.354811] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.354816] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 2.354826] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 2.354852] ehci_hcd 0000:00:1a.0: debug port 2
[ 2.355201] libata version 3.00 loaded.
[ 2.358733] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 2.358754] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xd0a19000
[ 2.368069] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.368209] hub 3-0:1.0: USB hub found
[ 2.368214] hub 3-0:1.0: 2 ports detected
[ 2.368308] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.368312] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 2.368319] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 2.368339] ehci_hcd 0000:00:1d.0: debug port 2
[ 2.372224] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 2.372229] ehci_hcd 0000:00:1d.0: irq 16, io mem 0xd0a18000
[ 2.381371] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.381467] hub 4-0:1.0: USB hub found
[ 2.381471] hub 4-0:1.0: 2 ports detected
[ 2.381534] ahci 0000:00:1f.2: version 3.0
[ 2.381580] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
[ 2.381617] ahci: SSS flag set, parallel bus scan disabled
[ 2.381646] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
[ 2.381649] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst
[ 2.381654] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.388429] scsi0 : ahci
[ 2.388488] scsi1 : ahci
[ 2.388534] scsi2 : ahci
[ 2.388587] scsi3 : ahci
[ 2.388634] scsi4 : ahci
[ 2.388700] scsi5 : ahci
[ 2.388893] ata1: SATA max UDMA/133 abar m2048@0xd0a17000 port 0xd0a17100 irq 46
[ 2.388896] ata2: SATA max UDMA/133 abar m2048@0xd0a17000 port 0xd0a17180 irq 46
[ 2.388898] ata3: DUMMY
[ 2.388899] ata4: DUMMY
[ 2.388900] ata5: DUMMY
[ 2.388901] ata6: DUMMY
[ 2.707440] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.714092] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[ 2.731354] usb 1-2: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
[ 2.731358] usb 1-2: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
[ 2.837193] usb 3-1: new high-speed USB device number 2 using ehci_hcd
[ 2.846253] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 2.846394] ata1.00: ATA-8: Hitachi HTS547575A9E384, JE4OA50A, max UDMA/100
[ 2.846398] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.848000] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 2.848133] ata1.00: configured for UDMA/100
[ 2.853924] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54757 JE4O PQ: 0 ANSI: 5
[ 2.927028] Refined TSC clocksource calibration: 2594.107 MHz.
[ 2.927035] Switching to clocksource tsc
[ 2.960819] hub 3-1:1.0: USB hub found
[ 2.960907] hub 3-1:1.0: 6 ports detected
[ 3.066748] usb 4-1: new high-speed USB device number 2 using ehci_hcd
[ 3.173226] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.186105] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 3.186112] ata2.00: ATAPI: hp DVD-RAM UJ8D1, H.01, max UDMA/100
[ 3.190368] hub 4-1:1.0: USB hub found
[ 3.190473] hub 4-1:1.0: 6 ports detected
[ 3.201445] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 3.201453] ata2.00: configured for UDMA/100
[ 3.207309] scsi 1:0:0:0: CD-ROM hp DVD-RAM UJ8D1 H.01 PQ: 0 ANSI: 5
[ 3.209908] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 3.209911] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 3.209971] sd 0:0:0:0: [sda] Write Protect is off
[ 3.209975] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.210051] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.213008] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.213012] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.213137] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.256484] usb 3-1.2: new full-speed USB device number 3 using ehci_hcd
[ 3.347820] input: HP HP Link-5 micro dongle as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input1
[ 3.347863] generic-usb 0003:03F0:A407.0001: input,hidraw0: USB HID v1.11 Keyboard [HP HP Link-5 micro dongle] on usb-0000:00:1a.0-1.2/input0
[ 3.350907] input: HP HP Link-5 micro dongle as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.1/input/input2
[ 3.351027] generic-usb 0003:03F0:A407.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [HP HP Link-5 micro dongle] on usb-0000:00:1a.0-1.2/input1
[ 3.351045] usbcore: registered new interface driver usbhid
[ 3.351047] usbhid: USB HID core driver
[ 3.409566] usb 3-1.3: new high-speed USB device number 4 using ehci_hcd
[ 3.774803] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 > sda4
[ 3.775176] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.674852] PM: Starting manual resume from disk
[ 4.674855] PM: Hibernation image partition 8:5 present
[ 4.674856] PM: Looking for hibernation image.
[ 4.675014] PM: Image not found (code -22)
[ 4.675018] PM: Hibernation image not present or could not be loaded.
[ 5.111987] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 6.250920] systemd[1]: systemd 204 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 6.446778] systemd[1]: Inserted module 'autofs4'
[ 6.459928] systemd[1]: Set hostname to <HP4520sNotebook>.
[ 7.523274] systemd[1]: Cannot add dependency job for unit cdemu-daemon.service, ignoring: Unit cdemu-daemon.service failed to load: No such file or directory. See system logs and 'systemctl status cdemu-daemon.service' for details.
[ 7.523287] systemd[1]: Cannot add dependency job for unit modem-manager.service, ignoring: Unit modem-manager.service failed to load: No such file or directory. See system logs and 'systemctl status modem-manager.service' for details.
[ 7.523476] systemd[1]: Starting Login Prompts.
[ 7.523788] systemd[1]: Reached target Login Prompts.
[ 7.523799] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 7.523834] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 7.523843] systemd[1]: Starting Remote File Systems.
[ 7.524133] systemd[1]: Reached target Remote File Systems.
[ 7.524142] systemd[1]: Starting Syslog Socket.
[ 7.524449] systemd[1]: Listening on Syslog Socket.
[ 7.524458] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 7.524761] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 7.524769] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 7.525085] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 7.525093] systemd[1]: Starting LVM2 metadata daemon socket.
[ 7.525406] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 7.525414] systemd[1]: Starting Delayed Shutdown Socket.
[ 7.525722] systemd[1]: Listening on Delayed Shutdown Socket.
[ 7.525735] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 7.525763] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 7.525786] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 7.526149] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 7.526199] systemd[1]: Starting udev Kernel Socket.
[ 7.526505] systemd[1]: Listening on udev Kernel Socket.
[ 7.526546] systemd[1]: Starting udev Control Socket.
[ 7.526856] systemd[1]: Listening on udev Control Socket.
[ 7.526865] systemd[1]: Starting Encrypted Volumes.
[ 7.527159] systemd[1]: Reached target Encrypted Volumes.
[ 7.527168] systemd[1]: Starting Journal Socket.
[ 7.527485] systemd[1]: Listening on Journal Socket.
[ 7.560729] systemd[1]: Starting Load Kernel Modules...
[ 7.581156] systemd[1]: Mounting Huge Pages File System...
[ 7.601534] systemd[1]: Mounting POSIX Message Queue File System...
[ 7.621953] systemd[1]: Starting udev Coldplug all Devices...
[ 7.688498] systemd[1]: Started Set Up Additional Binary Formats.
[ 7.688524] systemd[1]: Starting Setup Virtual Console...
[ 7.759161] systemd[1]: Starting Apply Kernel Variables...
[ 7.779592] systemd[1]: Starting Create static device nodes in /dev...
[ 7.799991] systemd[1]: Mounting Debug File System...
[ 7.820362] systemd[1]: Starting Journal Service...
[ 7.841068] systemd[1]: Started Journal Service.
[ 7.841098] systemd[1]: Expecting device dev-sda7.device...
[ 7.844108] systemd[1]: Started File System Check on Root Device.
[ 7.844119] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 7.864519] systemd[1]: Expecting device dev-sda5.device...
[ 8.003303] cfg80211: Calling CRDA to update world regulatory domain
[ 8.390753] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 8.902068] systemd-udevd[139]: starting version 204
[ 9.740962] Linux agpgart interface v0.103
[ 9.742419] agpgart-intel 0000:00:00.0: Intel Ivybridge Chipset
[ 9.742520] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 9.743606] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 9.743755] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 9.778185] mei: module is from the staging directory, the quality is unknown, you have been warned.
[ 9.778362] mei 0000:00:16.0: setting latency timer to 64
[ 9.778420] mei 0000:00:16.0: irq 47 for MSI/MSI-X
[ 9.812223] hp_accel: laptop model unknown, using default axes configuration
[ 9.820580] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 9.820620] ACPI: Sleep Button [SLPB]
[ 9.820672] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
[ 9.820751] ACPI: Lid Switch [LID]
[ 9.820805] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 9.820837] ACPI: Power Button [PWRF]
[ 9.880136] ACPI: AC Adapter [AC] (on-line)
[ 9.882206] ACPI: Requesting acpi_cpufreq
[ 9.887435] iTCO_vendor_support: vendor-support=0
[ 9.928473] wmi: Mapper loaded
[ 9.929367] lis3lv02d: 8 bits 3DC sensor found
[ 9.943480] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 9.943537] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 9.943591] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 9.955660] Monitor-Mwait will be used to enter C-1 state
[ 9.955679] Monitor-Mwait will be used to enter C-2 state
[ 9.955686] ACPI: acpi_idle registered with cpuidle
[ 10.179283] [drm] Initialized drm 1.1.0 20060810
[ 10.249632] ACPI: Battery Slot [BAT0] (battery present)
[ 10.315729] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
[ 10.344717] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 10.371132] thermal LNXTHERM:00: registered as thermal_zone0
[ 10.371136] ACPI: Thermal Zone [CPUZ] (53 C)
[ 10.450136] Linux media interface: v0.10
[ 10.499134] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
[ 10.499142] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
[ 10.499201] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[ 10.623647] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 10.623777] r8169 0000:05:00.0: irq 49 for MSI/MSI-X
[ 10.623937] r8169 0000:05:00.0: eth0: RTL8168evl/8111evl at 0xf8738000, b4:b5:2f:85:a8:6e, XID 0c900800 IRQ 49
[ 10.623940] r8169 0000:05:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 10.645945] usb 1-2: applying rev.C fixup
[ 10.652542] usb 1-2: applying rev.C fixup
[ 10.659143] usb 1-2: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
[ 10.659153] usb 1-2: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
[ 10.659598] MOSCHIP usb-ethernet driver 1-2:1.0: eth1: register 'MOSCHIP usb-ethernet driver' at usb-0000:00:14.0-2, MOSCHIP 7830/7832/7730 usb-NET adapter, 00:13:3b:16:79:bf
[ 10.659617] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[ 10.686387] input: HP WMI hotkeys as /devices/virtual/input/input7
[ 10.762782] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00473/0x640000/0xa2400
[ 10.795986] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
[ 10.798335] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
[ 10.798695] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
[ 10.799082] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 10.806360] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[ 10.818885] thermal LNXTHERM:01: registered as thermal_zone1
[ 10.818887] ACPI: Thermal Zone [GFXZ] (0 C)
[ 10.838775] Linux video capture interface: v2.00
[ 10.972720] uvcvideo: Found UVC 1.00 device HP HD Webcam [Fixed] (0461:4e1d)
[ 11.011711] [drm] radeon defaulting to kernel modesetting.
[ 11.011713] [drm] radeon kernel modesetting enabled.
[ 11.011724] VGA switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[ 11.011750] radeon 0000:01:00.0: enabling device (0000 -> 0003)
[ 11.011920] [drm] initializing kernel modesetting (TURKS 0x1002:0x6841 0x103C:0x17F4).
[ 11.011958] [drm] register mmio base: 0xD0900000
[ 11.011959] [drm] register mmio size: 131072
[ 11.081464] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[ 11.207484] input: HP HD Webcam [Fixed] as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input10
[ 11.207552] usbcore: registered new interface driver uvcvideo
[ 11.207566] USB Video Class driver (1.1.1)
[ 11.498272] thermal LNXTHERM:02: registered as thermal_zone2
[ 11.498276] ACPI: Thermal Zone [EXTZ] (46 C)
[ 11.499349] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 11.499405] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 11.499441] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 11.711160] WARNING! power/level is deprecated; use power/control instead
[ 12.213082] device-mapper: uevent: version 1.0.3
[ 12.213173] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
[ 12.307953] Adding 19529724k swap on /dev/sda7. Priority:-1 extents:1 across:19529724k
[ 12.702412] ATOM BIOS: HP/Wistron
[ 12.702440] [drm] GPU not posted. posting now...
[ 12.705224] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[ 12.705226] radeon 0000:01:00.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF
[ 12.707038] [drm] Detected VRAM RAM=2048M, BAR=256M
[ 12.707041] [drm] RAM width 128bits DDR
[ 12.707086] [TTM] Zone kernel: Available graphics memory: 436080 kiB
[ 12.707088] [TTM] Zone highmem: Available graphics memory: 1364312 kiB
[ 12.707089] [TTM] Initializing pool allocator
[ 12.707106] [drm] radeon: 2048M of VRAM memory ready
[ 12.707107] [drm] radeon: 512M of GTT memory ready.
[ 12.707117] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 12.707118] [drm] Driver supports precise vblank timestamp query.
[ 12.707144] radeon 0000:01:00.0: irq 50 for MSI/MSI-X
[ 12.707152] radeon 0000:01:00.0: radeon: using MSI.
[ 12.707197] [drm] radeon: irq initialized.
[ 12.707200] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 12.707359] [drm] radeon: ib pool ready.
[ 12.707415] [drm] Loading TURKS Microcode
[ 12.798929] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 12.824175] thermal LNXTHERM:03: registered as thermal_zone3
[ 12.824177] ACPI: Thermal Zone [LOCZ] (53 C)
[ 12.834057] thermal LNXTHERM:04: registered as thermal_zone4
[ 12.834059] ACPI: Thermal Zone [BATZ] (24 C)
[ 12.834443] thermal LNXTHERM:05: registered as thermal_zone5
[ 12.834446] ACPI: Thermal Zone [PCHZ] (127 C)
[ 12.834552] thermal LNXTHERM:06: registered as thermal_zone6
[ 12.834555] ACPI: Thermal Zone [DM1Z] (0 C)
[ 12.834643] thermal LNXTHERM:07: registered as thermal_zone7
[ 12.834645] ACPI: Thermal Zone [DM2Z] (0 C)
[ 12.851764] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input14
[ 12.852020] Registered led device: hp::hddprotect
[ 12.852038] hp_accel: driver loaded
[ 13.041172] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 13.041267] radeon 0000:01:00.0: WB enabled
[ 13.041269] [drm] fence driver on ring 0 use gpu addr 0x80000c00 and cpu addr 0xff88ac00
[ 13.057534] [drm] ring test on 0 succeeded in 1 usecs
[ 13.057619] [drm] ib test on ring 0 succeeded in 0 usecs
[ 13.057813] [drm] Radeon Display Connectors
[ 13.057814] [drm] Connector 0:
[ 13.057815] [drm] VGA
[ 13.057817] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[ 13.057818] [drm] Encoders:
[ 13.057820] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 13.064822] [drm] Internal thermal controller with fan control
[ 13.065645] [drm] radeon: power management initialized
[ 13.128155] No connectors reported connected with modes
[ 13.128159] [drm] Cannot find any crtc or sizes - going 1024x768
[ 13.129014] [drm] fb mappable at 0xB0142000
[ 13.129016] [drm] vram apper at 0xB0000000
[ 13.129017] [drm] size 3145728
[ 13.129018] [drm] fb depth is 24
[ 13.129019] [drm] pitch is 4096
[ 13.132598] Console: switching to colour frame buffer device 128x48
[ 13.135472] fb0: radeondrmfb frame buffer device
[ 13.135474] drm: registered panic notifier
[ 13.135481] [drm] Initialized radeon 2.16.0 20080528 for 0000:01:00.0 on minor 0
[ 13.135775] i915 0000:00:02.0: setting latency timer to 64
[ 13.151631] mtrr: no more MTRRs available
[ 13.151633] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 13.151767] i915 0000:00:02.0: irq 51 for MSI/MSI-X
[ 13.151773] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 13.151774] [drm] Driver supports precise vblank timestamp query.
[ 13.151833] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
[ 13.151865] vga_switcheroo: enabled
[ 13.151905] radeon atpx: version is 1
[ 13.152431] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 13.152434] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 13.456412] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp on
[ 13.633390] fbcon: inteldrmfb (fb1) is primary device
[ 13.633392] fbcon: Remapping primary device, fb1, to tty 1-63
[ 14.113087] fb1: inteldrmfb frame buffer device
[ 14.113235] [Firmware Bug]: ACPI(DGFX) defines _DOD but not _DOS
[ 14.115105] acpi device:03: registered as cooling_device4
[ 14.115346] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input15
[ 14.115409] ACPI: Video Device [DGFX] (multi-head: yes rom: no post: no)
[ 14.116103] acpi device:0b: registered as cooling_device5
[ 14.116334] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input16
[ 14.116391] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 14.116417] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 1
[ 24.776873] r8169 0000:05:00.0: eth0: link down
[ 24.777050] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 27.141948] tun: Universal TUN/TAP device driver, 1.6
[ 27.141950] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 28.793712] systemd-journald[118]: Failed to set ACL on /var/log/journal/172a25a10784a0f0f1d52e0a0000014b/user-120.journal, ignoring: Invalid argumenI dont know what to do. Why it wont load wifi modules on startup?
when I try archlinux install iso it loads wifi all ok.
lspci -nn | grep Net
04:00.0 Network controller [0280]: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe [1814:3290]
lspci -v
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
Subsystem: Hewlett-Packard Company ProBook 4540s
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: agpgart-intel
Kernel modules: intel_agp
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: d0900000-d09fffff
Prefetchable memory behind bridge: 00000000b0000000-00000000bfffffff
Capabilities: [88] Subsystem: Hewlett-Packard Company Device 17f6
Capabilities: [80] Power Management version 3
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [a0] Express Root Port (Slot+), MSI 00
Capabilities: [100] Virtual Channel
Capabilities: [140] Root Complex Link
Capabilities: [d94] #19
Kernel driver in use: pcieport
Kernel modules: shpchp
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device 17f4
Flags: bus master, fast devsel, latency 0, IRQ 51
Memory at d0000000 (64-bit, non-prefetchable) [size=4M]
Memory at c0000000 (64-bit, prefetchable) [size=256M]
I/O ports at 4000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [d0] Power Management version 2
Capabilities: [a4] PCI Advanced Features
Kernel driver in use: i915
Kernel modules: i915
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04) (prog-if 30 [XHCI])
Subsystem: Hewlett-Packard Company Device 17f6
Flags: bus master, medium devsel, latency 0, IRQ 46
Memory at d0a00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [70] Power Management version 2
Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+
Kernel driver in use: xhci_hcd
Kernel modules: xhci_hcd
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
Subsystem: Hewlett-Packard Company Device 17f6
Flags: bus master, fast devsel, latency 0, IRQ 47
Memory at d0a14000 (64-bit, non-prefetchable) [size=16]
Capabilities: [50] Power Management version 3
Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+
Kernel driver in use: mei
Kernel modules: mei
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device 17f6
Flags: bus master, medium devsel, latency 0, IRQ 16
Memory at d0a19000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
Kernel driver in use: ehci_hcd
Kernel modules: ehci_hcd
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
Subsystem: Hewlett-Packard Company Device 17f6
Flags: bus master, fast devsel, latency 0, IRQ 49
Memory at d0a10000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [100] Virtual Channel
Capabilities: [130] Root Complex Link
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: d0800000-d08fffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: Hewlett-Packard Company Device 17f6
Capabilities: [a0] Power Management version 2
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: d0700000-d07fffff
Prefetchable memory behind bridge: 00000000af200000-00000000af2fffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: Hewlett-Packard Company Device 17f6
Capabilities: [a0] Power Management version 2
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.3 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 (rev c4) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Memory behind bridge: d0600000-d06fffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: Hewlett-Packard Company Device 17f6
Capabilities: [a0] Power Management version 2
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.5 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 6 (rev c4) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d0500000-d05fffff
Prefetchable memory behind bridge: 00000000d0400000-00000000d04fffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: Hewlett-Packard Company Device 17f6
Capabilities: [a0] Power Management version 2
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device 17f6
Flags: bus master, medium devsel, latency 0, IRQ 16
Memory at d0a18000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
Kernel driver in use: ehci_hcd
Kernel modules: ehci_hcd
00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04)
Subsystem: Hewlett-Packard Company Device 17f6
Flags: bus master, medium devsel, latency 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel modules: iTCO_wdt
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Device 17f6
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 45
I/O ports at 4068 [size=8]
I/O ports at 4074 [size=4]
I/O ports at 4060 [size=8]
I/O ports at 4070 [size=4]
I/O ports at 4040 [size=32]
Memory at d0a17000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [70] Power Management version 3
Capabilities: [a8] SATA HBA v1.0
Capabilities: [b0] PCI Advanced Features
Kernel driver in use: ahci
Kernel modules: ahci
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Thames [Radeon 7550M/7570M/7650M] (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Radeon HD 7650M
Flags: bus master, fast devsel, latency 0, IRQ 50
Memory at b0000000 (64-bit, prefetchable) [size=256M]
Memory at d0900000 (64-bit, non-prefetchable) [size=128K]
I/O ports at 3000 [size=256]
Expansion ROM at d0920000 [disabled] [size=128K]
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Legacy Endpoint, MSI 00
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [150] Advanced Error Reporting
Kernel driver in use: radeon
Kernel modules: radeon
03:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 30)
Subsystem: Hewlett-Packard Company Device 17f6
Flags: bus master, fast devsel, latency 0, IRQ 18
Memory at d0703000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at af200000 [disabled] [size=64K]
Capabilities: [a4] Power Management version 3
Capabilities: [80] Express Endpoint, MSI 00
Capabilities: [94] MSI: Enable- Count=1/1 Maskable- 64bit-
Kernel driver in use: sdhci-pci
Kernel modules: sdhci_pci
03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 30) (prog-if 01)
Subsystem: Hewlett-Packard Company Device 17f6
Flags: fast devsel, IRQ 18
Memory at d0702000 (32-bit, non-prefetchable) [size=256]
Capabilities: [a4] Power Management version 3
Capabilities: [80] Express Endpoint, MSI 00
Capabilities: [94] MSI: Enable- Count=1/1 Maskable- 64bit-
Kernel modules: sdhci_pci
03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 30)
Subsystem: Hewlett-Packard Company Device 17f6
Flags: bus master, fast devsel, latency 0, IRQ 18
Memory at d0701000 (32-bit, non-prefetchable) [size=256]
Capabilities: [a4] Power Management version 3
Capabilities: [80] Express Endpoint, MSI 00
Capabilities: [94] MSI: Enable- Count=1/1 Maskable- 64bit-
Kernel driver in use: jmb38x_ms
Kernel modules: jmb38x_ms
04:00.0 Network controller: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe
Subsystem: Hewlett-Packard Company Device 18ec
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at d0610000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/32 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Device Serial Number 00-00-25-0f-10-e2-b7-f4
04:00.1 Bluetooth: Ralink corp. RT3290 Bluetooth
Subsystem: Hewlett-Packard Company Device 18ec
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at d0600000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/32 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Device Serial Number 00-00-26-0f-10-e2-b7-f4
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller (rev 07)
Subsystem: Hewlett-Packard Company Device 17f6
Flags: bus master, fast devsel, latency 0, IRQ 48
I/O ports at 2000 [size=256]
Memory at d0404000 (64-bit, prefetchable) [size=4K]
Memory at d0400000 (64-bit, prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 01
Capabilities: [b0] MSI-X: Enable- Count=4 Masked-
Capabilities: [d0] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Capabilities: [160] Device Serial Number 00-00-00-00-00-00-00-00
Kernel driver in use: r8169
Kernel modules: r8169 -
Intel Wireless Display not installing on W530
I noticed recently that Intel Wireless Display (WiDi) was not installed on my W530, despite my recollection of installing it via Lenovo Update. So I tried downloading the latest version both from Lenovo (3.5) and directly from Intel (4.0), but neither will install on my system. During the install, I get a message saying "This platform is not compatible with Intel WiDi or the application is in use. Please see the log for more details." Now, since I have an Intel i7 CPU with HD 4000 integrated graphics and an Intel wireless card (Centrino Ultimate 6300), my system meets the system requirements for WiDi. i have also updated the Intel PROSet wireless software to the most recent version, as recommended by Intel's website.
Kaso suggested on the Notebook Review forums that this could happen if I clean installed Windows instead of booting from the Lenovo-supplied OEM image, since there may be specific registry keys or values that signify the system supports WiDi. As i did clean-install Windows, I'm wondering if anyone knows what those specific registry keys or values might be, so I can add them in.
And if anyone has a different idea why WiDi won't install on my system, I'd appreaciate your input as well. Thank you.
Thinkpad W530, i7-3720QM, 1920x1080 screen, 32GB RAM, dual SSDs (Samsung 830, Crucial M4 mSATA), Quadro K2000M, 9-cell battery, DVD burner, backlit keyboard, Bluetooth, Intel 6300 wireless cardI have had a number of difficulties with Intel WIDI aswell on my W530. And I will give you a few recommendations.
I recently clean installed my windows and used the Lenovo update tool to install and update all drivers. Then I installed the WIDI app from the lenovo page (3.5 something). Then it works like a charm. My windows reinstall is some coorporate reinstall. So it is not Lenovo generic windows.
You cannot install WIDI for some reason if you have your computer connected to any monitors or in the dock. I think it has something to do with the installer having difficulties with recognizing the Intel HD 4000 when you are at the same time using the NVIDIA GPU.
I have tried a lot of different combinations/versions of WIDI, Intel proset and HD4000 drivers before the reinstall and not all of them work. First I updated all the drivers and it did not work, then I rolled back the drivers and it still did not work. Finally I got it to work after hours of work. But I do not remember what versions I used when it did finally work. After the windows reinstall everything works.
I am using:
Intel WIDI 3.5.40
Intel HD 4000: 9.17.10.2843
Intel Proset: 15.6.1.0
I am very hesitant upgrading any of the drivers/apps because I fear it will cause problems with WIDI.
Let me know if you have any questions. Perhaps I am able to answer those.
I should perhaps mention that WIDI is not exactly the perfect technology. I have a brand new LG TV with WIDI, but I still encounter pixelations and other stuff once in a while, but I think it has something to do with my router (which is in another room) and a lot of WIFI noise in my apartement building with a lot of different WIFI connections.
A moment ago I launched WIDI to look for the version number and this is what I saw. So perhaps I need to update something today. I will look into it when I get home where my TV is. -
Ts-L633a DVD drive not compatible with Windows 7 64bit upgrade
Ts-L633a DVD drive on my Pavilion Dv7 1232nr is not compatible with Windows 7 64bit upgrade but will work fine if I downgrade back to Vista 64bit so what DVD drive is there other then the TS-L633a drive that I already have that is compatible with the Windows 7 64 upgrade so that I can buy and install on my laptop.
Here's one out of nowhere: do you have CD/DVD software that includes Sonic DLA or something like it? I've seen that take over drives and prevent normal operation.
If you right click on the drive and hit properties, are there any suspicious looking tabs?
Total WAG, and about 1% likely, but there you go.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество -
ITunes & Apple Mobile Device Driver Not Compatible w/ Windows 64bit Systems
In short, I spent over 2 hours on the phone tonight with Apple Support. The call was elevated to a software engineer. After several minutes he apologigized and state the Apple Mobile Device Driver is not compatible with Windows 64Bit systems.
Therefore I can't activate or do anything for that matter. I effectivly have a $600 paper weight. I asked the engineer if they have any intention fixing it and never received a direct response.
None of the documentation that I have found states 64bit Operating Systems are not supported. The support rep stated nor he or his collegues were unware the mobile device driver didn't support 64 bit OSs either. I consider this to be really misleading and a huge oversight on Apple's part.
I wrapped up the call by asking him how I go about returning the device without being struck by the 10% restocking fee. He didn't know.
Anyone have Steve's number? I sure would be nice to get at the minimum a full refund.
I just thought everyone else should know so you don't tie up support lines and waste your time trying to find a resolution.
Regards,
KSPadOMG same thing here; rather annoyed and now have set up accounts on 2 comps(both 64 vista ultimate); about to try my 32 bit vista on my lappy; we'll see... i don;t have high hopes thoush.
What i knew about iPhone before buying it:
What You Need
To use iPhone, you need:
A new two-year wireless service plan with AT&T
A Mac or a PC with a USB 2.0 port and one of the following operating systems:
Mac OS X version10.4.10 or later
Windows XP Home or Professional with Service Pack 2 or later
Windows Vista Home Premium, Business, Enterprise, or Ultimate edition
iTunes 7.3 or later, available at www.itunes.com
An iTunes Store account
An Internet connection
You must be at least 18 years old to open a new AT&T wireless account. You will need a
major credit card to open a new iTunes Store account.
Yeahyeah check all that stuff;
Oh well; just when i thought i'd finally cross over to the beautiful packaging of APPLE. I remember in design school that form follows function. Thanks.
Windows Vista -
External Drive not compatible with iMovie
I just purchased a WD My Book 500gb drive to store home videos I'm editing in iMovie. The drive shows up in the event library with a yellow triangle with an exclamation mark in the center. If I try to drag events to the drive I get the following message "volume is not compatible with iMovie." I have searched the discussion board, but have only succeeded in totally confusing myself. I'm sure this is probably a simple matter, but I can't seem to untangle it... Please help.
Click here and follow the instructions.
(43641) -
ThinkPad W530 Wireless Driver Not Available for Download
I have a ThinkPad W530 laptop running Windows 7 Enterprise 64-bit. Machine type and model = 2438-4CU
When I go to the driver list on Lenovo's website and click on it to download...it's unavailable...you can't download it. The release date shows 3/28/13
Intel Wireless LAN (11abgn, abg, bg) for Windows 7 (64-bit) version 15.03.1000.1637
g1w216ww_64.exe
78.8 MB
I have also installed Lenovo's System Update and it doesn't list the wireless driver as a download option either. I have installed all the other drivers found by the System Update tool.
Am I doing something wrong or is there an issue with this particular driver download.
Thanks for your help...
BillYou could just grab the latest 15.6.1 off of the Intel site:
http://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=22547
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen -
Network Controller & Intel Chipset Driver not installing
Hello, I have 15 r203tx laptop. I have recently formatted my system and installed all the drivers. But NETWORK CONTROLLER driver and INTEL CHIPSET driver is not installing. INTEL CHIPSET driver is saying "please plug the device : device not found". NETWORK CONTROLLER hardware : "driver not found". WINDOWS 8.1 64-BIT Help me with some solution
Hi . Welcome to the HP Forums! It is a wonderful place to find answers and information!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide. Learn How to Post and More When I looked at the specifications for your notebook, I noted it came with FreeDOS 2.0.HP 15-r203TX Notebook PC Product Specifications I see you have formatted the drive and installed Windows 8.1. You have installed drivers but the Intel chipset drive produced the error saying "saying "please plug the device : device not found", and no driver was located for the network adapter. Where did you acquire your drivers from? As you are unable to access the network from your notebook I suggest you try to download and save the driver files from the official HP page,to USB stick or CD/DVD to be able to install them. Here is link to the HP Notebook - 15-r203tx page, follow the links to display the drivers. To say thanks for replying please click the thumbs up button below. If this resolved your difficulty, please let other people know by choosing solution provided. Good Luck! -
I have a drive that is connected to my airport extreme. However I cannot move my events or projects while in iMovie. It tells me the drive is not compatible. When I formated the drive it was to the apple format. Does I movie not allow remote storage of events and projects?
One more thing how do I tell how the drive is formatted, it works great with time machine, and I had to format it at that time with disk utility.
Open the Disk Utility application and select the drive/volume. The utility will tell you how the drive is currently formatted. -
Wireless Driver Not Installing
Hey guys,
i have a Dell 14R (n4110), i upgraded to win 8 and after a week my wireless driver just disappeared and couldnt reinstall. I downgraded to win 7pro and had the same prob. Then i reinstalled win 7 home premium (which originally came with my laptop) and i'm
still having the same prob, i tried all the drivers for my model on Dell's site. Please assist, thanks!.
Regards,
Jevon.1.Reinstall driver from Dell support page
http://www.dell.com/support/drivers/us/en/19/Product/inspiron-14r-n4110
2. You may need to uninstall driver before installing new one. Follow the procedures here
http://www.thewindowsclub.com/uninstall-disable-roll-back-update-drivers-windows
3. Do not use optional drivers that comes with Windows Update
4. For troubleshooting see into Device manager and Event logs and share your findings
Regards
Milos -
Hey.i have to reinstall windows 7 on my laptop but i cant find any wireless driver compatible.i forgot to back up the recovery.i tried many drivers that are found in this web.i also tried the hp support but it also can't find any driver for the wireless adapter.please help.Thank you.
Hi: There is no info available online regarding what model wireless card your notebook has. Please do the following so I can figure that out, and then I will post the links to the drivers you need. Go to the device manager. There should be an Other Devices category with a list of devices needing drivers under that category. The wireless card is labeled as a Network Controller. Click on the Network Controller device, and then click on the Details tab at the top of the Network Controller device window. Now you should see a Property drop down list and it is defaulted to Device Description. Drop down on that list and select the second item (Hardware ID's). Post the top string of characters you see in the window.
-
Probook g1 450 4th generation Intel Graphics Driver Not working
After Updating Baios my laptop , graphics driver not working . install successfully but when click the graphics driver icon , it's show the massage ,GfxUiEx has stopped working .
i am worried about it . what can i do ??
i uninastalled driver then again install but this massage show again ,,,i use windows 8.1.
massage is :@Ariful11
Thank you for using HP support forum. I have sent you a private message. If you’re unsure how to check your private messages please click here.
Thank you,
Omar
I Work for HP
Maybe you are looking for
-
Flash CS4/AS3 auto-size movieclip box containing TextField
I have a TextField that I'm going to populate dynamically in code. Imagine as a simple example a cartoon with the text bubble above the speaker's head, the bubble is a rounded rectangle with some embellishments like drop shadow and a border and such
-
Payments from third party as a subcontractor
I get paid through PayPal for a side business. I am under the $20,000/200 transaction threshold. I assume I won't get a 1099k. Is this income reported by PayPal to the IRS. And if so, how do I report it without a 1099. I have made over $600 but there
-
Separating 1st name and last name in contact name in a component
Hi, I have a requirement as follows: "while creating opportunity and after selecting the account, a pop up window prompted to choose the contact person.The form of the name has the Contactu2019s Lastname and Firstname concatenated into a field labele
-
As you can see in these two screens, iTunes isn't sorting some albums properly. They were fine before I reinstalled Lion. The top screen shows the songs grouped, but not in order. And the second is pretty obvious. They are both albums made up of rand
-
Lightroom 1.1 Is Now Available
The Lightroom 1.1 update is now available. I'll provide more details through a blog posting later this evening. http://www.adobe.com/products/photoshoplightroom/ Regards, Tom Hogarty Lightroom Product Manager