Intel WiUSB shows yellow triangle in Device Manager
Why does Device Manager show me: ---------------------------------------------------------------- Intel® WiUSB This device is not working properly because Windows cannot load the drivers required for this device. (Code 31) Device ROOT\UOIP_BUS_DRIVER\0000 had a problem starting. Driver Name: oem36.inf Class GUID: {8A2EDC79-C759-46F2-88AF-9D4EFE3B5EEE} Service: XHCIPort Lower Filters: Upper Filters: Problem: 0x1F Status: 0x0 ---------------------------------------------------------- All Microsoft and Lenovo updates installed. OS is Win 8. thanks
Hey there justcurious,
Can you confirm the version of the WiDi Driver you have by chance? This may need to be udpated. I've noticed some issues around the USB-IF xHCI USB Host Controller across the forums and I wonder if they are related. Thank you!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Similar Messages
-
Microsoft ISATAP and 6to4-Adapter yellow triangles in device manager
Hello,
we´ve disabled IPv6 via Registry. Now we noticed that the ISATAP and 6to4-Adapter have yellow triangles in device manager. My question is: is that normal behavior, when disabling IPv6? Can we remove this adapters without no issues? Or schould we install
drives (which)?
Thanks.Hi,
This adapter is used to transfer IPv6 site to IPv4 site, if you disable IPv6, this adapter is useless.
You can directly delete is if you don't need it anymore.
Kate Li
TechNet Community Support -
So I connected my iPod to iTunes and an error message came up saying it needed an updated version of iTunes 64 bit and I was missing the Apple Mobile Device USB driver so I downloaded it because another discussion said that was the solution. I did but it wont show up in my device manager or services. Can someone help me figure out whats wrong?
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem -
Hi, I loaded Windows 7 Pro w/XP mode and iMac USB show working properly in device manager, but i cannot see a USB flash drive, or my Mac Superdrive. Does anyone have a suggestion? Thanks!
MacDrive to provide better HFS support.
And to acces and write. -
No Audio Device Detected (but it shows up correctly in device-manag
Well, I bought a new soundcard, since I was tired of my old integrated one, and wanted good surround-sound. The model is Creative Sound Blaster X-Fi Xtreme Gamer Fatalty, and my old integrated one is a Realtek-HD (doesn't say more than that).
Now to my problem, I removed the drivers from Realtek (even cleaned lots of it from the registry) and put in the new soundcard in a PCI-slot, as it's supposed to be done. I then started the computer, canceled the automatic installation and installed the drivers from the CD I got with the card (this is what it said I should do), now the card shows up in the device-manager as "Creative SB X-Fi" and it tells me it's working fine etc. The Creative-update software also detects it so that I can download the latest drivers.
However, I have no sound, and in the control-panel's "sound & sound devices" it says "No sound device" and I can't do anything. :/ (not sure if this is what it's called in english, I'm using the swedish version of Windows XP Professional), I can select the soundcard in creatives Volume Panel (where it says "select audio device") without any error-messages, but when I double click the application (to change the volume etc.) it says it can't find any supported soundcards.
I tried removing the drivers etc. for the SB-card and installed the Realtek ones again, but it's the same thing there, it shows up in the device manager (under sound - video & gaming-units) but windows still says it can't find an audio-device. My guess is that there's some kind of conflict between the Realtek-integrated card and the new one.
Anyone got any ideas of what to do? :/
Edit: Also, the computer keeps wanting to install the integrated soundcard, but I can't seem to find any way to turn it off in the BIOS :/ (I have an ABIT motherboard, don't know what type, can't seem to find the box for it). The BIOS is called "Phoenix - AwardBIOS v6.00PG"
I have ofcourse tried to fully remove and reinstall the SB-drivers aswell, but no luck there. :/next time go into control panel click on sounds, click on record, right click any where in the record box and then put check marks in the boxes that say show disabled devices, and show disconnected devices. Those devices disappear when the boxes are not checked making your pc think there is no output sound.
-
Sony z3 not showing up in google device manager
Sony z3 not showing up in google device manager
I have checked the mark under security....
same with my new sony z3 tablet.
Solved!
Go to Solution.Strange thing. Are you willing to try the repair? Do it with PCC if you want to:
http://www.sonymobile.com/gb/tools/pc-companion/
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien -
I am running Windows 7 and have had no problems with with the 3 iPods we connect, but as of a couple days ago, the computer will no longer recognize them. Other USB devices (flash drives and Android phone) have no problem being recognized. Additionally, if I have my iPod plugged in before I start iTunes, my laptop will not open iTunes until I unplug my iPod. My laptop will also not shut down if my iPod is plugged in, and will only shut down if I unplug it. It will recognize that my iPod is plugged in and connected (it lights up and charges), but does not show up in the My Computer. The iPod is recognized in Device Manager. Also, when I unplug any of the iPods, it will show up for just a second in the My Computer before disappearing. I have tried the following:
Restart computer
Uninstall/reinstall iTunes and all Apple programs
Renaming for a higher drive (Other drives aren't in E: drive)
Putting anti-virus programs on my computer and doing a full-scan
Disk defragment
Deleting Temp folder (I have stopped all programs on my laptop and it still won't let me)
Stopped iTunes/Apple services and re-enabled them
Updating Driver Software
Please Helphave had no problems with with the 3 iPods we connect, but as of a couple days ago, the computer will no longer recognize them.
The problem is with ALL of the iPods, at the same time? Are they are shuffles?
It is unlikely that three iPods would go bad at the same time, so the other possibilities are bad USB cable, the bad USB port on computer, or a software issue on computer?
If these are different types of iPods and you are using different USB cables, that probably rules out bad USB cable. Since the iPod is recognized by the computer and other devices are recognized, that probably rules out a problem with the USB port. So, that leave a software issue on computer as the most likely cause.
Did you install any new software (or change the setting of software) on the computer at the time this problem started, particularly something that runs continuously in the background, such as security software?
You've trying uninstalling and re-installing Apple software. Is there a way you can disable other third-party software systematically? -
Report on Yellow Bang in Device Manager
Is there a query or report I can use in ConfigMgr 2007 that will list all systems with a Yellow Bang (or UNKNOWN device) in Device Manager? Is that collected as part of Hardware Inventory?
Thanks!
--Joe.
--Joe.You should actually be able to use the data in Win32_PNPEntity -- Nick wrote a script for it at
http://t3chn1ck.wordpress.com/2011/03/30/script-to-check-devices-without-drivers/
I don't remember if this class is collected by hardware inventory by default or not but it would be easy to add and then create queries and/or reports from the collected data.
Jason | http://blog.configmgrftw.com -
New hard drive shows in Bios and device manager but not in windows explorer in windows 7
I have added a new sata 500gig hard drive and it is recognised in the bios, but is not recognised by windows explorer, though the disk is showing in device manager as a hard drive . I have followed the example on the forum by going to computer management and rescanning disks, to no avail.
Any ideas how I can get to use the drive?
My comp is a packard bell and all the details are here:- http://support.packardbell.com/uk/item/?sn=845014390330&g=1400
Hope someone can help.
RobThanks Dale (and everyone else). A cure! Sorry I did not reply earlier, but have been trying all known fixes to no avail... However. The second of your links in the last reply of yours (starting, New Drive or mapped network drive) worked with a slight variation in windows7, as follows is how I achieved joy.
Right-click My Computer , and then click Manage .
Under Computer Management (Local) , click Disk Management .
This far is as above, then I'll add comments to the existing help to show my variant.
In the list of drives in the right pane, right-click the new drive and then click Change Drive Letter and Path(s) .
Here it still did not show the drive in the right window, but below it there is a second window listing disks and one of them unallocated and without a drive letter was my new drive. IMPORTANT! This set of info may not be apparent unless you enlarge the box by dragging it, as the default only shows the top box (so I have missed it until now on all my searching). Right clicking on this gave a set of obvious choices to create a choice of drive letter, format and options (NTFS etc) and this created the drive for me. I am sorry I am vague on the box choices, but on right selecting a live drive it doesn't bring up the "unallocated" box choices again. Many thanks and I hope my variant helps anyone else with a similar prob. Thanks again - Rob
Click Change , and in the drop-down box, select a drive letter for the new drive that is not assigned to a mapped network drive.
Click OK , and then click OK again. -
Dear All,
in device manager - other devices - pci device is with yellow mark os:windows 8.1 , laptop B5070 series .
in PCI events tab mesage is:
Device PCI\VEN_10EC&DEV_5229&SUBSYS_380117AA&REV_01\00000001004CE00000 was configured.
Driver Name: null
error code 28
pls. suggest how remove yellow mark, suggest or provide link to get compatable driver.
regards,
Mallik
Solved!
Go to Solution.Good day and welcome to the community.
Based on the device string you included, http://www.pcidatabase.com/index.php returns the following:
Device Id Chip Description Vendor Id Vendor Name
0x5229 Realtek PCIE CardReader 0x10EC Realtek Semiconductor Corp
For reference, here is the link to your mahine's support pages:
http://support.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-b-series-laptops/lenovo-b50-70-...
and here is the sublink for the Win8.1 drivers for the device detailed above:
http://support.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-b-series-laptops/lenovo-b50-70-...
Hope this helps a bit.
Regards.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee. -
Sound issue in WXP - one yellow ! in device manager on Equium
When installing the sound drivers it finds a modem on hih def audio, then when you reboot it throws up an error message. I rolled back the driver but still need to solve the sound problem, in device manager I have one yellow, other device, PCI device.
The sound drivers appear to be there and working, the drivers are Legacy is this right? Looks like a conflit somewhere. I dropped Vista after network problems now XP has sound problems.
Any Ideas pleaseHi David
Ive checked your other postings created here in the forum and it seems you are a owner of Equium A100-027 PSAAQE series.
Am I right??
First of all I would like to clarify some things.
Mostly the yellow exclamation marks appear in the device manager because something could went wrong during the driver installation procedure or you used simply a wrong drivers.
I think you should firstly find out if you used right drivers!
Please go to the Toshiba driver page and check again the driver versions and download it again.
Ive noticed that many users download the wrong drivers and try to install it.
On the Toshiba page you will find also the installation instruction. There are 2 txt files available.
One for XP and one for Vista.
Please be sure that you use the right installation instruction for the right OS.
Then download all drivers and follow the installation order mentioned in the txt file!
Usually everything should run ok and you should be able to install all drivers!
Best regards -
HP Zbook dual monitors issue - Intel HD Graphics Family ! in Device Manager
I have upgraded to Windows 10 x64 last week and I was using dual monitors. I discovered one of the monitor has stopped working and when I chekced in the device manager, one of the 2 display adaptors has got an exclaimation mark beside it and says: Windows has stopped this device because it has reported problems. (Code 43) I have tried uninstall and installing it to no avail. Anyone has the same issue? Is this a driver issue? Thank you.
it's as below: 17th July 2015 10.18.15.4256:
-
Hi, I just installed Win7 64 Pro - very happy with the machine, it's all crisp and light.
My device maneger reports a missing driver for PCI Device. I can't tell what's missing exactly, the laptop works fine.
I noticed the chipset driver was missing for Win7. For win8.1 it was an Intel driver (?!?, The laptop is an AMD A8).
Was wondering if you can pitch in some info about what is missing and how do I install it.
Thanks
This question was solved.
View Solution.Hi:
You need this chipset driver for your model. Install and reboot.
http://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2064
You need this driver for the PCI dev. DL and install the first driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=15&PFid=25&Level=4&Conn=3&DownT... -
Printer not showing as wireless on device manager
On all of my laptops my 1050 Desket 1050 j410a icon appears as a ghost image untll a USB cable is connected. Software has been uninstalled and re-installed twice and no change with the printer.
Take out the USB cable. Uninstall the software on Programs and Features. Run the installer again then plug the USB until it asks for it.. then go through the process of converting the usb into wireless..
-
Ethernet Controller Showing Exclamation Mark in Device Manager.
....it says the drivers are not installed.
Where can I go to download the drivers for this? The download page: http://www.msi.com/service/download/ doesn't seem to provide any help.
My main board is an MSI G41M-p28http://www.msi.com/product/mb/G41M-P28.html#/?div=Driver&os=All
Maybe you are looking for
-
Can two iTunes accounts share the same appleTV simultaneously ?
can two iTunes accounts share the same appleTV simultaneously ?
-
Using Diffrent Exchange rate Type for Payroll
Hi All experts, We wish to use a different exchange rate type for Payroll currency conversion. As we all know that the Payroll driver uses the currency coversion rate M and is hardcoded in the standard Programmes. Now please suggest me whether it is
-
Anyone know when 9iAS Ver.2 will be released for NT????
9iAS version 2 has been released for HP, LINUX, etc... but nothing in the last month for NT. Does anyone have any idea when the production release of 9iAS version 2 will be released for NT????? Thanks!
-
KM and CM confuguration documents
Hi, Can you tell me where to find the KM and CM confuguration documents.
-
hi there my wifi button is disabled and this happed after my last update