Intel Xeon E7 4830 for Prime LMS 4.1

Is this processor model "Intel Xeon E7 4830" supported for the installation of Cisco Prime LMS 4.1 in a virtualized environment ?

That CPU type will be fine, subject to the processor requirements outlined in the Installation Guide here.
A new installation should be based on LMS 4.2 however, and not 4.1. LMS 4.1 will limit you to being hosted on VMWare 3.0-4.1 (see elsewhere in the same Installation Guide). LMS 4.2 introduced support for VMWare 5.
There are also a fair number of updated features and bug fixes in 4.2. See the Release Notes for the full listing.

Similar Messages

Problems getting Prime LMS to start up

Just got the Cisco Prime Lan NMS software. Getting this error when I try to turn up the appliance after I deployed it in ESXi -
Power On virtual machine:Failed to power on VM.
See the error stack for details on the cause of this problem.
Time: 7/16/2013 9:32:26 AM
Target: Cisco Prime LAN Management Solution
ESXi: ucs-c1b4
Error Stack
Failed to power on VM.
Could not power on VM : CPU min outside valid range.
Group host/user: Invalid CPU allocation requested for VM vmm0:Cisco_Prime_LAN_Management_Solution. (min: 4520 mhz, max: -1, minLimit: -1, shares: -3)
SharedArea: Unable to find 'testSharedAreaPtr' in SHARED_PER_VM_VMX area.
This is being deployed on a Cisco UCS B200 M3 with 128GB of ram. There is nothing else deployed on this blade. I elected for thin provisioning on disk storage.
Wouldnt expect that I would have to tweak the install any.
Suggestions ?

5.1 is not supported - only 4.1 and 5.0 (reference). That's most likely the root cause.
I didn't have any specific information for Prime LMS OVA but even though some folks have reported success with Prime Infrastructure 1.3 on 5.1, the product managers told me at Cisco Live that 5.1 would not be supported until PI 2.0. If they ever release an LMS 4.3 (TBD), it might have ESX 5.1 support.

Prime LMS EOL? Migration to Prime Infrastructure???

Hi All,
I'm a little bit confused about the support for Prime LMS 4.2.5... is there any date for end of Life/end of support for LMS?
Should customers migrate to Prime Infrastructure or what does cisco recommend???
best regards

Prime LMS 4.2 is not yet End of Sales or End of Life. Cisco continues to provide support develop minor device package updates etc. for it.
It will not get another major release going forward as strategically the platform being developed for wired and wireless LAN management is Prime Infrastructure (PI).
For existing LMS customers, they are encouraged to review the current feature comparison (link) and determine which product better serves their needs given that PI 2.2 does not have feature parity with Prime LMS 4.2.5. (Even new PI customers are given a license for Prime LMS in acknowledgement of this fact. How long that continues remains to be seen.)

MSI H61I-E35-B3 Mini ITX and Intel Xeon LGA1155 Cpu ?

Hi,
I've bought MSI H61I-E35-B3 Mini ITX board, it supports LGA1155 processors, core i3 / i5 / i7. My question is - have anyone tested this board with Intel Xeon processor ? For example Intel Xeon E3-1235 3.20GHz LGA1155. I've read in some other Mini ITX LGA 1155 boards descryptions, that they suport this cpu's. Maybe this one can also support it.

It's not in the supported list; http://eu.msi.com/product/mb/H61I-E35--B3-.html#/?div=CPUSupport
Recommend to confirm with MSI Tech Support; http://support.msi.com

Best graphics card for MacPro 5,1- 2.8GHz Quad-Core Intel Xeon OS 10.6.8

Hi everyone.
I have a 2011 MacPro 5,1- 2.8 GHz Quad-Core Intel Xeon. 32GB RAM OS 10.6.8 with the stock ATI Radeon HD 5770 graphics card.
When I output/process/convert video through Quicktime or iMovie or Adobe Premiere or VisualHub (not always, but usually WS multi-pass H264, best quality), it seems to take forever.
Currently (as I type this) outputting a 2 hour movie made of 14 clips of 852x480 30fps 44KHz movies to a 29.97 multi-pass H264 48KHz file with Adobe Premiere CS 5.5.2- is coming up on 10 hours.
I would like to upgrade to a better graphics card with better VRAM and processing power. I realize that being on OS 10.6.8 may create a few problems. I'm willing to upgrade to 10.7 or 10.8 if need be. Though I'd hate to lose the carbon programs that I still use (like VisualHub).
I've heard that nVidia is the way to go, but I'm not sure which card to get. The Quadro FX 4800 looks promising (and expensive).
Anyone have any insight?
Thanks in advance for any help.

Dual or triple boot until you are sure if Lion or ML works.
GTX 570 2.5GB VRAM $320 from MacVidCards is one way to go, even GTX 680 (but that does require 10.8.x)
Nvidia 4000 (I thought I read Nvidia has a 5000 Quadro) not the older 4800. Amazon has Q4K $800.

I have a Mac Pro 4,1 quad core intel Xeon running mac OSX 10.6.8 and I have just moved studios and now need to use the Internet wirelessly but there's no airport facilities on this model can anyone tell me what model of airport card I would need for this

I have a Mac Pro 4,1 quad core intel Xeon running mac OSX 10.6.8 and I have just moved studios and now need to use the Internet wirelessly but there's no airport facilities on this model can anyone tell me what model of airport card I would need for this mac

Instead of getting a wireless card for the Mac Pro, you might want to consider getting an 802.11ac wireless bridge device that would enable you to connect more than one device to it by Ethernet cable and to eventually take advantage of the faster 802.11ac wireless standard.

I have Ps CS4. I run Apple OS X 10.9.5 on a new MacPro 3GHz 8-core Intel Xeon E5 - 64 GB.    I hardly ever use CS4 ( preferring Elements for my low level needs), but I now want to use it's function for stitching together a landscape. I fire it up and g

I have Ps CS4. I run Apple OS X 10.9.5 on a new MacPro 3GHz 8-core Intel Xeon E5 - 64 GB.    I hardly ever use CS4 ( preferring Elements for my low level needs), but I now want to use it's function for stitching together a landscape. I fire it up and get Error 150:30 with the suggestion to contact you - hence this message

I have Ps CS4. I run Apple OS X 10.9.5 on a new MacPro 3GHz 8-core Intel Xeon E5 - 64 GB.    I hardly ever use CS4 ( preferring Elements for my low level needs), but I now want to use it's function for stitching together a landscape. I fire it up and get Error 150:30 with the suggestion to contact you - hence this message

JDK 1.4.2 for Intel Xeon 64 bit

Gurus,
I am installing ECC 6.0 on Windows.
I am unable to download the JDK 1.4.2* for Intel xeon processors on 64 bit running Windows Server x64 standard edition.
Been to the site http://java.sun.com/j2se/1.4.2/SAPsite/download.html, to download JDK, but unable to logon because of some authentication issues. Is there a different location or JDK version that can be used for installation.
Regards
Abdul

Hi,
I have the same problem, I must install J2SE on a brand new server with Intel XEON L5520 CPUs.
It's NOT possible to install the current J2SE version from http://www.sun.com/software/javaforbusiness/sap_download.jsp,
because it's for AMDx64.
But under http://java.sun.com/products/archive you can find an older version "j2sdk-1_4_2_19-windows-i586-p",
it is possible to install this version ( you must register to download ).
I find no other way at the moment.
With regards,
Michael

JDK 1.4.2 version for Windows Server 2003/x64 on Intel Xeon 64 bit processo

Hi,
I'm currently installing a SAP Netweaver Server on a Windows Server 2003/X64 (Intel Xeon CPUs).
The server requires a JDK 64 bit with minimum version 1.4.2_09. Version 1.5.0_00 and higher are not supported by SAP.
I have searched on the J2SE 1.4.2 download page and I haven't found any windows 64 bit except for Itanium processors.
SAP mention clearly on its web portal that it supports Windows Server 2003/X64 64bit with Sun JSE 1.4.2 64 bit.
Any help?
Thanks,
adaif

Hello,
I ran into the same problem searching for the 1.4.2 JDK for Windows x64 platform and found this discussion post. It was helpful!
Could you tell me where to download the JCE policy files from? Do they need to match the same JDK version (1.4.2)?
The Install Guide for SAP NetWeaver 7.0 SR3 Java on Windows MS SQL Server says to download the JCE policy files for your platform (Windows x64) from http://java.sun.com/javase/downloads. But I could only find jce_policy-6.zip. Is that the right JCE policy files for Windows 2003 x64 64bit platform for SUN JSE 1.4.2 64bit?
Thanks,
Asif

Changing server for Cisco Prime LMS 4.2 installation

Hi,
I am planning to install Cisco Prime LMS 4.2 with 50 device license on a temporary server. My question is:
Can we install Cisco Prime LMS 4.2 on Server A, applied the license for 50 devices, and then several months later we uninstall LMS on Server A, reinstall it on Server B, and applied the same license for 50 users?
Is it possible and legal to do that? I am worry if the LMS license is binding to the first server's MAC address.
Thanks in advance.

also :vmversion 4.1 and 5.1 both checked, hdd 256, scsi , memory 8 gig,

Cisco Prime LMS 4.1 - Support for Cisco Catalyst 3560-C Series Switches

Hello together
I have a customer which uses the following switch. Last year I have installed LMS 4.1 for him to manage the switches. Unfortunatly the switch model is not supported. According to the information found on the following site the switch is supported for most of the modules in LMS:
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.1/device_support/table/lms41sdt.html
The oid object of the device is the following: 1.3.6.1.4.1.9.1.1465
Supported Software: 12.2(55)EX (Customer has 12.2(55)EX3
Version Support Type: Device Update
So I updated all device updates I was able to find.
Step 1: For that I went to Admin > System > Software Center > Schedule Device Downloads and created a job where I have downloaded the latest versions of all packages.
Step 2: Installed the downloaded packages Admin > System > Software Center > Device Update and installed all the packages.
Unfortunatly I don't see the same result like described in the Supported Device Table for LMS 4.1.
- Cisco View -> works
- Inventory and Config Collection -> works
- Fault Monitor not working -> Error Code Unsupported
- Network Topology Layer 2 Services -> Device Type ciscoProducts.1465, Symbol Question Mark
- VLAN Management -> Doesn't work
- User Tracking > seems also not to work
When I open the report for supported devcies (Reports > System > Device Support) and search for C3560C... I find the following devices, but not mine which i need:
C3560C-8PC-S     .1.3.6.1.4.1.9.1.1466
C3560CG8PC         .1.3.6.1.4.1.9.1.1317
C3560CCG8TC     .1.3.6.1.4.1.9.1.1318
wsC3560CPD8ptS     .1.3.6.1.4.1.9.1.1368
Does anybody have experience with the same switch type / model? Am I doing something wrong or is this type of switch not implemented correctly till now? Further the docuemntation supported devices would be wrong.
Thanks for any feedback Erich

Thanks but I just heard back from my Cisco SE and he assures me that an AP will NOT use up a license.
I've asked him to verify his answer for me.
Is your answer based on real world expereince (the best there is)? That is, are you running Prime LMS 4.1 and does it indeed use up a license for each light-weight AP it discovers & manages?
Thanks for mentioning options 1-3 but I do not wish to employ any of them. I don't mind buying the additional licenses for APs ... I just need to know if I have to or not.
Ian.

Which OS for Mac Pro (3,1) 2 x 3 GHz Quad-Core Intel Xeon?

I purchased my Mac Pro 3,1 2 x 3 GHz Quad-Core Intel Xeon with 10.5 (Leopard)-
I want to wipe the disc clean and clean install lion.
I do know that sometimes it's better for older configurations to stay with "older" OS platforms....???
thanks

Is there not a full 10.7 OS Disc?
There is no official DVD at all, but there is a thumb drive with both 106 and 10.7 on it for US$70.
On an older Mac, about 2010 or older, you need access to one of:
• The Mac App Store ( such as on a Mac with a working 10.6.8 or better)
• working Recovery HD
• a bootable 10.7 Installer, on thumb drive, Hard drive, or DVD
So for ONE 2010 or older Mac with a bad drive, you would have to buy the US$70 Apple thumb drive, or have previously made a DVD or Hard Drive when you previously downloaded 10.7. Or you re-install 10.6.8 then overwrite it with the downloaded 10.7.
• another Mac with 10.7 installed so you could transfer Recovery HD to the down Mac with "Lion Recovery Disk Assistant"
OS X Lion: About Lion Recovery Disk Assistant
On some 2010 and most 2011 models, if Recovery HD is messed up or not Installed, but you have a working Broadband connection [with DHCP enabled], the Firmware has been upgraded so it will boot from the Internet and do the whole job using "Lion Internet Recovery" as described in the second section of this glossy article:
http://www.apple.com/macosx/recovery/
If no DHCP is available [no Router upstream, either yours or your ISP's], it may not work.

Fastest Video Card for Mac Pro with Dual-Core Intel Xeon

Can anyone offer advise on whether I can update the video card in my Mac Pro Dual-Core Intel Xeon computer? I'm pretty sure i can but I have no idea how to upgrade and what to look for in video cards. I do know that I want something fast, hopefully faster than the current ATI Radeon X1900 XT for use with Aperture 3.0. Any suggestions are greatly appreciated.

5770 in the 2006 Mac Pro
ATI HD 5770 MC742ZM A

Logging for changing device configuration using cisco prime LMS / PI

Dear All,
How to see / set for
for changing device configuration (routers, switches) using cisco prime LMS / PI ?
and, how to see network topology diagram using PI / LMS?
Thanks,
Jerri

anyone can help. thanks.

Intel Xeon E5640 VS E5649 for VMWARE

Hello,
I am new to virtualization and working on getting a server for my lab to try out VMWARE. I am planning on getting a dual processor, 24GB, 1TB SAS, HP Proliant DL380 server. I have two options for the CPU. Intel Xeon E5640 (4 core) 2.66GHZ and Intel E5649 (6 core) 2.53GHZ. What would be better for virtualization? more cores or better clock speed?
Initially I will be installing lab Cisco Call manager on this server. Later I might add few more VMs.
Thank you

I would choose more core
Most of the time speed ins't an issue for lab
You just need to run more VMs
Sent from Cisco Technical Support iPhone App

Intel Xeon E7 4830 for Prime LMS 4.1

Similar Messages

Maybe you are looking for