Intel Xeon Windows 64 Bit : Which Oracle software Version?

Hi!
we have Windows Enterprise Server SP2 64 bit with Intel Xeon processor and would like to install the SOLMAN with Oracle.
According to the original Oracle-DVD from SAP there are only three possible choise entries:
a) AMD64
b) IA64
c) I386
But I have the feeeling it should be one choice like "x86" is not?
Which one should we apply?
The I386 can be installed indeed, but we are getting the error during the SAPINST-Installation "Oracle software not installed". I thought this entry was only for 32 bit?
The IA63 Bit can not be installed.
Only the AMD64 we could install. But the question is, whether AMD is the same to Intel Xeon?
Thank you very much for any useful help/comments...
regards

Hi,
You have still a "32-bit" platform ONLY.
1. Intel 64 is not AMD64, they are different. AMD64 implementation is only meant for AMD processors although the family is 64T support, full implementation is NOT done.
2. Your assumption of x86 is correct. You MUST go for I386 option ONLY !!!
3. Error of "Oracle software not installed" is different and you should not relate it to hardware. It is only for the environment variables and registry.. This will happen even in normal case..
Once again, you should NOT use AMD64 and IA64.. Try only with I386 option..
BTW, firstly, whats the reason for you to choose a 64-bit o/s that are meant for 64 - bit Itanium systems... CHoose a operating system that fits and will work with SAP optimally!
You should only choose a 32 Bit Enterprise edition of operating system. Windows Server 2003 R2 well works in your case and should be your choice !!
Finally your combination should be -
1. Windows 32 Bit Enterprise Edition R2 ---> O/s
2. i386 DVD -
> SAP/ Oracle DB
Hope this helps, revert for queries
Cheers,
Senthil

Similar Messages

W2k8 is 32-bit,which oracle 10g version should be installed?

Hi everyone,
I am a new DBA. Now I will install Oracle 10g on w2k8. I found w2k8 is 32-bit system, i am wandering which oracle 10g version I should install?
Thanks!

Go to http://www.oracle.com/technology/software/products/database/index.html
Note that Windows 2008 explicitly is listed against 11.1.0.7
Therefore, you can assume that 11.1.0.7 is the first that definitely supports W2008.
And you can assume that anything older than that line is definitely not supported.
And if it is not supported (as is the case for 10g), you can assume that you will run into some kind of problem either during installation or (worse) at some unknown time later.
You can probably find some workaround to make it appear to work. Which is fine ... it's your job. (At least until it stops working.)

Which oracle software is suitable for Microsoft windows server 2003

Hi,
I'm suppose to install oracle 9i,10g on the system which i mentioned below.
Which oracle software is suitable for the system?
System:
Microsoft Windows Server 2003 R2
Standard x64 Edition
Service Pack 2
Computer:
Intel(R) Xenon CPU
E5335 @ 2.00Ghz
2.00Ghz, 2.00Gb of RAM
Waiting for your suggestion.
Thanks, Muhammed.

Thanks for your quick response.
As you said v11 can be installed and
Could you please say about the bit (32 or 64bit)? which oracle binaries i can download
because my system configuration is server 2003 - 64 is bit xeon process.
Many Thanks,
Muhammed

Fileshare between my Mac Pro Quad Core Intel Xeon (64-bit) & Power Mac 9600

I want to make my Power Macintosh 9600/233 (Mac OS 9) a shared computer with my Mac Pro Quad Core Intel Xeon (64-bit)(Mac OS 10.6.6). I am using a Netopia Model 3346N-VGx DSL Ethernet Managed Switch to network with my Samsung printer and the Mac Book Pro.
I also have a Power PC G4 (Mac OS 10.5.8) connected (via a Ziplinq 48" Retractable Crossover Network Cable) to a Farallon EtherWave 10 Base-T AAUI Transceiver, which in turn is connected to the Netopia, from which I can share files. All of this is ethernet connectivity.
I thought I could connect my 9600 using the same method as for the G4 or by connecting the ethernet cable from the 9600 directly into the Mac Pro Quad Core. However, neither of these methods work.
An additional stumbling block is that I have not used this 9600 for several years and am not sure of its account name. I'm fairly certain of its password. But because I don't have a second monitor for this machine, I can't muddle my way in.
My questions:
1. What might be a network solution to this dilemma?
2. Or, do I need to get another monitor for this computer and leave it un-networked and just transfer files manually?
3. Or, would whatever hard drives are in the 9600 be transferable into the networked G4 or the main Mac Pro? (not sure what they are.)
Any suggestions greatly appreciated.

Oh man, what a dilemma...
1. What might be a network solution to this dilemma?
Without a monitor on the 9600, almost none. At the very least you'll need to configure the server with appropriate network settings for your environment, and that can't be done headless.
You might only need a display for long enough to setup the network, but you'll need one all the same.
Once the network is configured your options are either AFP or FTP, but I'm not even sure the old version of AFP is supported anymore, which means you may need to fire up an FTP client on the 9600 and push the files to your MacPro.
2. Or, do I need to get another monitor for this computer and leave it un-networked and just transfer files manually?
As mentioned above, you're going to need a monitor at the very least to configure the network settings. I'd be inclined to say at that point you might as well copy the files off any way you can and put the 9600 to rest. If you're really, really fortunate and the 9600 has a CD burner I'd probably use that and count myself lucky
3. Or, would whatever hard drives are in the 9600 be transferable into the networked G4 or the main Mac Pro? (not sure what they are.)
The 9600 shipped with SCSI drives, which no current Mac support (at least without a SCSI card), so there's no way to remove the drive from the 9600 and attach it directly to the MacPro.

I have old ipod touch which has software version 1.1.5 is i would like to know which version i can update in that ipod touch

i have old ipod touch which has software version 1.1.5 i would like to know which version i can update in that and ipod and how

You probably have a 1G ipod. To get the latest iOS for that mode go to:
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
It is a paid update. You may have to use a different browser to get the sublink to work correctly.
Go here to identify your iPod:
Identifying iPod models
The 2G can go to 4.2.1.

How to check that same Oracle software versions(including patch versions)

How to check that same Oracle software versions(including patch versions) is installed on two hosts(machines) ?
We are using following process:
On Host A :
1) Get the Oracle version using SQLPlus -v
From this output, extract the version number.
2)Find the patches installed using opatch lsinventory -detail
From the output , Extract the Patch numbers and Bugs fixed.
3) Store the version , patch and bugs information in a common file.
On Host B :
Repeat the steps 1 and 2 and compare with the values from Host A.
Please let us know if there is any other method to do this.
Thanks.

This is wrong: for Oracle Database version 10.2.0.4 *4* identifies the patch set and does not give information about interim patchs.
It is correct to use opatch lsinventory to get interim patchs.
Edited by: P. Forstmann on Jul 21, 2009 12:38 PM

JDK 1.4.2 version for Windows Server 2003/x64 on Intel Xeon 64 bit processo

Hi,
I'm currently installing a SAP Netweaver Server on a Windows Server 2003/X64 (Intel Xeon CPUs).
The server requires a JDK 64 bit with minimum version 1.4.2_09. Version 1.5.0_00 and higher are not supported by SAP.
I have searched on the J2SE 1.4.2 download page and I haven't found any windows 64 bit except for Itanium processors.
SAP mention clearly on its web portal that it supports Windows Server 2003/X64 64bit with Sun JSE 1.4.2 64 bit.
Any help?
Thanks,
adaif

Hello,
I ran into the same problem searching for the 1.4.2 JDK for Windows x64 platform and found this discussion post. It was helpful!
Could you tell me where to download the JCE policy files from? Do they need to match the same JDK version (1.4.2)?
The Install Guide for SAP NetWeaver 7.0 SR3 Java on Windows MS SQL Server says to download the JCE policy files for your platform (Windows x64) from http://java.sun.com/javase/downloads. But I could only find jce_policy-6.zip. Is that the right JCE policy files for Windows 2003 x64 64bit platform for SUN JSE 1.4.2 64bit?
Thanks,
Asif

JDK 1.4.2 for Intel Xeon 64 bit

Gurus,
I am installing ECC 6.0 on Windows.
I am unable to download the JDK 1.4.2* for Intel xeon processors on 64 bit running Windows Server x64 standard edition.
Been to the site http://java.sun.com/j2se/1.4.2/SAPsite/download.html, to download JDK, but unable to logon because of some authentication issues. Is there a different location or JDK version that can be used for installation.
Regards
Abdul

Hi,
I have the same problem, I must install J2SE on a brand new server with Intel XEON L5520 CPUs.
It's NOT possible to install the current J2SE version from http://www.sun.com/software/javaforbusiness/sap_download.jsp,
because it's for AMDx64.
But under http://java.sun.com/products/archive you can find an older version "j2sdk-1_4_2_19-windows-i586-p",
it is possible to install this version ( you must register to download ).
I find no other way at the moment.
With regards,
Michael

VM Fusion + Windows XP + Which Antivirus software is compatiale?

I will be installing VM Fusion on my Macbook Pro and Windows XP. Which Antivirus software is compatible? I am really interested in McAfee Total Protection 2008. However requires that the processor to run it should be a pentium 500 processor. My Macbook Pro has an intel processor. Any suggestions would be greatly appreciated. Also please let me know what you personally use and how you like it. I would love to hear some feedback.
Thank you,
TraLana

*"However requires that the processor to run it should be a pentium 500 processor. My Macbook Pro has an intel processor"*
Ummm, Pentiums are made by Intel, and they are fairly dated. Your MacBook is more than capable of running McAffee.

Which Oracle Workflow version required for Oracle Warehouse Builder 92

Hi,
I have Oracle Database 9i and OWB 9.2. I want to install Oracle Workflow, which version is required for OWB 9.2.
Help required from anybody in this matter.
Thanks
Liyakat

Goodmorning Liyakat,
Simply get the latest version, 2.6.3 that is for my platform.
There's an interesting and informative document on that on Mark Rittman's site, check the following link: http://www.rittman.net/archives/000770.html
Good luck, Patrick

Which iPod software version ?

Hi,
I just bought the Nike+ iPod, was very excited to use it this WE, but didn't manage to make it work !! It seems that the receiver does not detect the sensor. My iPod nano 3rd gen is running on the iPod sotfware version 1.1, and iTunes says that this is the latest version. But on the user guide of the Nike+ iPod it is said that the iPod should run with the latest iPod software, which is 1.2
Who should I trust ?
Which version of the software is running on your iPod ?
Thanks for your help, Alexis

Hi,
Me again ! I went back to the store and found the solution : when you look in details to the config requirements, there are not all the same. If you want to use the Nike+ sensor with a 3rd generation iPod nano, it should be stated on the package : "requires iPod nano with software v1.3 or iPod nano (aluminium) with version 1.1 or later". It seems that the first I get from the store was from an older stock. With a recent one, it works perfectly.
By the way, I now know the distance from my favorite sport shop to my office !
Cheers, Alexis

Which SQL Developer version is compatible with which Oracle db version?

Does anyone have a link to the docs that detail which versions of SQL Developer support which versions of the Oracle database? We're looking to upgrade our 10.1.0.4 database to 11gR1 or 11gR2, and we're wondering if we'll need to upgrade out SQL Developer 1.5.4 installation as well.
Thanks,
--=Chuck

Does anyone have a link to the docs that detail which versions of SQL Developer support which versions of the Oracle database? We're looking to upgrade our 10.1.0.4 database to 11gR1 or 11gR2, and we're wondering if we'll need to upgrade out SQL Developer 1.5.4 installation as well.
Thanks,
--=Chuck

Any one using 11g DB with Oracle B2B?which oracle DB versions are suported

we're on 10.2.0.3.0 and are in middle of DB upgrade , wanted to check if 11G is right option or just go to 10.2.0.4.0
Thanks,
Kalyan

Hi,
I would recommend you stay on the curent patch set. Application Server 10.1.2.3 with database 10.1.0.5 and the latest Oracle B2B patch.
The certification matrix indicates the highest DB version, in this context, is Oracle Database 10g R2 (10.2). Please verifiy on metalink.
regards,
Jeff
P.S. The REPCA utility will not allow you to install into a 11g DB.

Hp solution centre alone not working in my windows 7 which has 13 version driver

I installed the hp full pack for hp d1360 software from hp website. Every other thing including hp update are working perfectly. But the HP solution centre is not working. I have tried repeated uninstall or install but to no avail.
Moreover, if i update the patch file then i get Read Error with a blank screen. What does that denotes and how to solve this problem. Hp experts would see my post and give the correct solution.
I have tried all the things, and what is prevented me from accessing the hp solution centre, a great feature, which could not be assessed.

Please run the HP Print and Scan Doctor.
If this does not resolve the issue, please feel free to write back for additional troubleshooting instructions.
Thank you.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Which Oracle db version supports partitioning

Hello Everyone reading my post,
I'm a student who needs to work on a partitioned table. I've tried several versions of oracle db but each time I get error ORA-00439: Partitioning feature not enabled.
It would be great help if you can guide me to the right version that supports partitioning.
Thanks

Maran,
I posted the exact version, because there is a huge difference between 8i and 8.0, and a not so huge difference between 7.3 and 8.0. The only difference is mainly partitioning.
This is why an instructor at Oracle University (I won't mention his name, because he is still there), stated internally they labeled 8.0 as Oracle 7.4.
Quite frankly, partitioning would have called for a major redesign of the datadictionary, but Oracle didn't do that, and more or less 'mangled' partitioning in.
He also stated 'some say they did change the rowid, to make sure Forms 3.0 wouldn't work against the new version'. Forms 4.5 was long out then, but apparently no one upgraded
So no insinuation, no flame, no sneer, was intended, not at Alok, not at anyone.
I only posted it, because Alok was incorrect, and because of the difference between various versions.
Consequently, I don't understand the comment of N. Gasporotto.
I think it is quite probably changing the rowid was done with a hidden agenda.
Why would Oracle not try to force people to upgrade?
Oracle is a commercial venture, and Larry has to pay his boats somehow ;)
I'm sorry if I caused any confusion, it was not intended.
Sybrand Bakker
Senior Oracle DBA

Intel Xeon Windows 64 Bit : Which Oracle software Version?

Similar Messages

Maybe you are looking for