Intel Xserve will NOT boot from hard disk drive

I have two Intel Xserves 2.0 QC machines
I have tried to re-install version 10.4.11 OS (don't ask) onto a Hard disk drive that is in a Disk drive caddy and inserted in the machine.
When booting from The installation DVD media
The disk is seen by the "Disk Utility" (the disk is partitioned as GUID boot) and the installation proceeds to the disk.
Once the first pass of the installation is complete and the system reboots, the system shows the folder and ? mark.
If I boot and hold "ALT" key to view all avaialble boot options the Hard Disk Drive does NOT appear as valid boot disk.
It does show, the still inserted Installation DVD.
I CAN boot from an external firewire drive and the Hard disk drive is visible to the OS once logged in.
I have tried different caddy postions (left, middle and right)
I have tried bona fide Apple supplied Disk drives
I have tried various different caddies
I have tried installing Operating System 10.5.* and 10.6.8 server
I have run SMC reset and system reset
But still I cannot boot off from any Hard Disk Drive inserted in a caddy at the front of the system.
Has anyone seen this behaviour?
Is it fixable?
Do I have replace something like the Hard Disk Drive back plane circuit board? Or even the main logic board?
I have now run out of ideas and cannot find any help in discussions or just googling.
ANY help would be very appreciated
Regards
Tony

Antonio Hi !
QC = Quad core or QX as it is written on the "pull out" serial number tab at rear of system
I have 3 late 2006 Intel xserves
On my intial posting I declared 2 were 2.0 machines - when I was trying to be concise
2 of the macines are 2.66 systems and 1 is 2.0 system - all are QX machines
the 2.0 and 1 of the 2.66 will NOT boot from the ADM and disk inside the system - whereas the other 2.66 system will.
I have many different Caddies and these have different product/model number labels
603-9965
603-9545
603-9796
these are marked "intel SATA"
The 80Gb was only one of the drives tested - I have used Seagate 400Gb 750Gb and 1Tb - all of which have been used in systems at one time or another
and as I said the drives ARE visible once the operating system (either installation DVD or external firewire are booted from) - they are just NOT visible when the system is searching for boot media.
Thanks for the guide - I will look through that and continue to try and find an answer

Similar Messages

Mac Mini i7 (Mavericks) will not boot from the external drive

Mac Mini i7 (Mavericks) will not boot from the external drive with Disk Warroir 4.4. or Drive Genius or Lion.
Not even from the external Firewire hard drive with Mavericks

Does the external HD have a GUID partition table?
Is the external drive formatted Mac OS X Extended (journaled)?
Is this a 2011 or late 2012 Mac?
How was Mavericks installed on the external drive?
Who is the builder of the drive mechanism in the external drive?
Who is the builder of the external enclosure?
What type of interface does the external drive have USB2, USB3, Firewire 400, Firewire 800, thunderbolt?
Is the external enclosure directly connected to the mini?
Have youtried a different interface cable?

Macbook Pro will not load OS and will not boot from Install Disk

When I try to turn on my macbook pro it goes to the gray logo screen with the spinning gear however it does not progress from there and then after several minutes it proceeds to restart itself and the same process repeats itself. I have tried to boot into single user mode with success and have run /sbin/fsck -fy and that has returned that the volume appears to be ok. However, when I hit reboot it returns to the same process of the gray screen and spinning gear to black screen which repeats. When I boot into verbose mode it progresses to AppleYukon2: RxRingSize <= 1024, TxRingSize 256, RXMAXLE 1024, TXMAXLE 768, STMAXLE 3328 then it stalls for several minutes and then it shows continuing
synchronizing disks... Killing processes
then it says some other stuff to fast to read.
When I try to boot from the install disk it will not boot from holding the c key it goes through the same aforementioned cycle. When using option to boot I can see the Disk then when I select it the cycle happens again.
Also I have XP installed and I am able to boot into that successfully. Any help would be greatly appreciated.
Not sure if I left anything out
-bryce

Welcome to Apple Discussions.
Do you have multiple Accounts defined on that system? The last time you successfully were running, did you run from the Account with Administrator privileges?
Do you have another computer from which you could boot and connect the Macbook Pro in Target Disk Mode to take a look at the drive from your working machine? Perhaps you can run Disk Utility from the working machine and point to the hard disk on the failing Macbook Pro.
Message was edited by: Rick Lang

Power Mac G4 400 MHz (AGP graphics) will not boot from hard drive

I have a Mac G4 400 MHz (AGP graphics) Machine Model: PowerMac 3.1 CPU Type:PowerPC G4 (2.8)
When I try to boot from the hard drive I get the folder with the flashing question Mark. The Machine will start up from the OSX 10.4 installer disk.
The system was running OSX 10.4.9 fine. I began to have problems with the hard drive, so I replaced it with an old Maxtor 5T040H4 40Gig Apple branded drive that I had sitting around.
The drive is jumpered (r50) for Master/Single.
I erased the drive in the old G4 using disk utility and wrote all zeros. I then used my store bought Tiger 10.4 install disk to install 10.4 on the drive.
After restarting I still get the flashing question mark. If I leave the Install disk in the DVD drive the system will attempt to install again.
I have zapped the PRAM, pressed the CUDA button, removed the battery and let the system sit unplugged for over and hour and it still will not boot from the hard drive.
To test the drive I removed it and put it in a Granite Digital firewire enclosure and connected it to another mac. The drive shows up and the system appears to be installed correctly.
What am I forgetting to do? Does anyone have any suggestions.
Thanks in advance.
Wesley G.

Hi! If Tom's solution doesn't work I would reboot from the install disc and then partition the drive as 1 partition instead of erasing it. Sounds like the driver on the disk is too old and installing a new partition map should write a new driver to the drive that is compatible with Tiger. Other than that it is possible that the drive has a spin delay jumper enabled and the drive isn't spinning up fast enough and the computer isn't looking long enough for the drive. Tom

After 10.5 upgrade Mac will not boot from hard drive

I just upgraded to 10.5 Leopard but my mac will not boot from the hard drive even after selecting my hard drive as the startup disk. The mac will start to boot but will cut itself off before the boot is complete. I have to leave the Leopard disk in the mac and hold down C to get the mac to turn on but it only allows me to install the software again.

instead of archive and install you might first want to try restoring your system using TM to some time point before your failed 10.5.1 upgrade. Then try upgrading to 10.5.1 again. I would suggest downloading the full 110 MB upgrade and installing it manually rather than doing it through the software upgrade menu.
You can download the upgrade here:
http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1051update.html

Mac will not boot from hard drive or install disc

Hello All
In dire need of advise...my intel Mac will not boot, even tried booting to the Snow Leopard install disc and all I'm getting is the white screen, apple logo and the wheel.
Just before this happened there was a buzzing sound like the fan was about to fail but that is only a guess on my part. Is there a keyboard shortcut to boot to a terminal window or similar to force the computer to boot from the install disc.
Thanks in advance for any help offered.
Warren

Hi Warren
Try holding the Option key and see if it will boot into Startup Manager, where you should be able to choose from a good Drive or your install Disk.
http://support.apple.com/kb/HT1533
or the D key and run the Apple Hardware Test.
http://support.apple.com/kb/HT1509
Also note: key commands may require a USB Keyboard if your using a wireless and it has become unpaired.
Dennis

Help needed on startup. My computer will not boot from the CD drive!!!

Problem with iMac G3 333, the Message on the screen states: "The System Software on the starup disk only functions on the media, not if copied to another drive." Like a fool, I copied the system folder from the original system software 9.2.2 on to the iMac. System disk which is not a complete system folder when used on the computer. I have searched the Internet, but can not find an answer. I have tried everything, holding down the C key, "Delete, Opition, Apple key, shift" holding the mouse down on startup, various combinations of other keys, etc. The CD starts to spin, but the computer switches to the hard drive and the message above returns. No matter what I try I still can't boot from the tray loading CD drive. Is there any Firmware code that I can use. I know how to access Firmware on the Imac and can boot the iMac using Firmware, but I don't know how to use Firmware to boot the CD drive which I need to do so I can reload the original software. CAN SOMEONE PLEASE HELP? Thanks, Jim

Yes, I have tried both System Softwares a number of times. The C key will not boot up the CD drive and the harddrive always boots with the original message. I need to get the CD drive to boot so I can reloaded tge original software. Do you know anything about booting the CD drive using Firmware? Jim

Core i7 mbp will not boot from external disk

One upon a time, I tried to boot my new:
Model Name:    MacBook Pro
Model Identifier:    MacBookPro8,1
Processor Name:    Intel Core i7
Processor Speed:    2.7 GHz
Number of Processors:    1
Total Number of Cores:    2
L2 Cache (per Core):    256 KB
L3 Cache:    4 MB
Memory:    4 GB
Boot ROM Version:    MBP81.0047.B0E
from a bootable Carbon Copy Cloner backup on my external FW800 drive. (This, after I used Migration assistant to move the user over from My MacBookPro 5,1 core 2 duo machine.)
It didn't like it, booting from the CCC clone, that is. There were problems with the boot of the new machine from that external disk and then problems with the boot from the internal disk. I repaired disk permisssions and all seemed to be well booting from the internal disk for several months until I tried to boot from my SL 10.6 2Z691-6431-A CPU Drop-in DVD upgrade included with the initial purchase. That didn't work. I got the grey "restart your computer by holding down the power button" screen with a bunch of words and numbers in the background. This also happened with the grey intsall disks that shipped with the machine with 10.5.7 on them.
Following this, the turning gear times are erratic, varying from 11 to 40 turns on boot up with an odd flicker happening for a fraction of a second during the turning gear screen. From time to time I'll get some beach balling while the login is taking place and all of the icons are loading in. After that, the machine functions fairly normally.
I know there's a problem though and I'm looking to resolve it with any advice the community can offer.
I have used DiskWarrior in the past but not for this machine which has not been used with this machine since it's incompatible. I also have a full timecapsule backup. I also have a partition on an external drive with OS 10.6 on it. Haven't tried to boot from it because I'm scared it'll mess things up worse.

I'm trying to boot my core i7 from any external disk without success getting only the grey restart screen. The machine will neither boot from the 10.6 upgrade disk, nor the external firewire disk.
I'm not sure, but it seems that you're suggesting that I rebuild the OS as though it were a brand new machine without any of my s/w or data, and I cannot conceive of such a monumental task. If you mean that I should reinstall the OS, that would be fine, but I can't boot from a DVD, which is what prompted this query to begin with.
I would like to resolve the external disk boot failure.

Original iMac will not boot from new disk

I am having considerable difficulty getting a new disk to boot in an original 'Bondi blue' iMac.
I think I have researched this issue reasonably well and found a few references to it but no solution. I have more resources than most and have tried every trick I know. The story at the following link is not dissimilar to my experience:
http://www.applefritter.com/node/20518
Details:
iMac - original 233 MHz revision A with 160 MB RAM
New disk - 120 GB 7200 rpm Western Digital disk type WD1200SB
Format - HFS+ with 7 GB first partition and 107 GB second partition
Jumpers - both CD and disk set to master - normal for this iMac I believe
The iMac will seldom boot from OS X 10.3 on first partition or OS 9.2.2 on second partition with or without the other OS totally removed. I have reformatted several times and played with several disk drivers. I have zapped PRAM a few times. I sometimes get a grey screen but more frequently get a flashing question mark.
I can mount both volumes when booted from a CD and every test shows that they behave as expected. The disk boots properly in a G4.
I am prepared to try anything but I would particularly appreciate advice from somebody who knows what the problem is.

Eureka - it works - thanks very much.
It now boots from OS 9.2.2 on both partitions every time. I have yet to replaced the OS X that I removed earlier but I am not expecting difficulties.
My view is that http://docs.info.apple.com/article.html?artnum=25249 is badly written. I assume that item 4 should read 'OS X' and not "Mac OS". It may have been written on the assumption that users only want OS X and Classic on a single partition. My experience, particularly with early iMacs, is that it pays to have 2 bootable partitions and it is expedient to have OS X on one and OS 9.2.2 on the other with the OS 9.2.2 being used for Classic and for direct booting into OS 9.2.2.
My error was in paying insufficient attention to
http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/stdadp.php?p_faqid=1277&pcreated=1095792241#jumper
which clearly indicates jumper positions for single drives although a few words about it would underline the point. I had already discovered that these iMacs normally have both CD and disk set to master so should have realised that strictly they are 'single drives'. I had initially used the clear, but misleading, drive silk screen printing, ie CS, slave, master to set the jumper but should have changed it when checking the WD site later. Perhaps they could use this thread to update their FAQs - I will mention it to them.
In answer to those, on this thread and elsewhere, who were not happy with my sloppy copying of OS 9.x, I discovered some years ago that as long as you 'blessed' the end result in situ with one of the free OS 9.x updaters it is surprising what you can get away with. - I am not advising anybody to do this unless it is within the terms of their Apple license!
Now I wonder if I should stick with OS X 10.3 or if it is worth trying OS X 10.4 with
http://eshop.macsales.com/OSXCenter/XPostFacto/Framework.cfm?page=XPostFacto.htm l
Does anybody know how satisfactory it is and if it has serious memory or speed implications? My only slightly unusual software is Cisco VPN client.

Intel Xserve won't boot from 3rd party drive in ADM

Right, I've got a Late 2006 Xserve Dual 2.66 with the normal non-RAID SAS/SATA board, which has been running fine for 2 years with a pair of non-Apple Seagate Barracuda ES 250GB drives (Bay 1 & 2), and an original 80GB ADM in Bay 3 as a spare boot disk.
Bay 1 & 2 are set up using SoftRAID and are partitioned into a boot volume (30GB) and a data volume (200GB), both RAID 1 mirrors. The boot volume is cloned nightly to Bay 3 (single volume, set up using Disk Utility). Data is backed up to a utility machine, so this is arrangement lets me handle any single drive failing.
This arrangement has worked fine for 2 years, and allows me to remotely boot off Bay 3 and run DiskWarrior or other disk maintenance software on the normal boot drive without having to drive across town with a firewire drive. I originally started with Mac OS X Server 10.4, but I'm now on Mac OS X Server 10.6.4.
Where things have come unravelled is, I need to upgrade the two 250GBs to something larger. I didn't realise that the Intel Xserve is pretty fussy with ADM sleds and the model of SATA drive they will work with. I didn't have any issues when I set up the Barracuda ES 250GB so wasn't expecting any problems this time.
I bought a pair of Seagate Constellation ES 500GB drives (well 3 actually, one to keep on the shelf as a spare).
I installed them in the sleds and inserted them in the Xserve. The green power LEDs came on but the drives weren't recognised in Disk Utility or System Profiler. I then added the jumper to set them to 1.5Gb/s and then they mounted. I went through my normal process of cloning the OS to them from a standard disk image I have of a known working OS install, ran Disk Utility to repair disk & repair permissions, Disk Warrior to check everything else (my standard paranoid procedures). Set the startup disk to the new install and rebooted. No joy, just the flashing question mark folder. Reboot with the option key, and the new volume doesn't appear in the list of available boot options.
I installed the drives in a firewire enclosure, and it booted without any problems, so it's not a corrupt install, it's something to do with the ADM sleds.
So to go back to basics, I tried initialising a single drive as a single volume and installed 10.6.4 server fresh from the DVD. Same result, no boot when in installed in ADM sled, boots fine in firewire case.
Erased drive, changed formatting to APM (rather then GPT), cloned OS, etc. Won't boot when in ADM sled, boots fine from firewire case. So that screws the theory that drives have to be GPT to boot on Intel hardware.
So I ordered a set of WD RE3 500GB drives (x 3) and repeated this whole process. Same deal, boots fine in firewire, won't boot when installed in ADM. GPT vs APM doesn't make any difference.
Try #3. Ordered desktop variants rather than server class drives. So armed with a pair of WD Caviar Black 500GB. Same deal, boot fine from firewire, will not boot when installed in ADM. Also required jumpers for 1.5GB/s and also the undocumented pins 7&8 (apparently this might be related to the new Advanced Format they are using)
Try #4
A pair of Seagate Barracuda 7200.12 500GB. This is where it gets tricky. One of the Barracuda will boot the Xserve when installed in an ADM, and one will not. So 2 Barracuda 7200.12, both same model number (ST3500418AS), both same firmware (CC38), yet they behave differently.
Try #5
Barracuda ES.2 250GB (x 3). Won't boot in ADM, will boot firewire.
Try #6
WD Caviar SE16 250GB (WD2500KS)
Boots in ADM (Yay!!) and firewire
Try #7
WD Caviar SE16 500GB x 2 (WD5000AAKS)
Boots in ADM and firewire
I've managed to get access to G5 Xserve (2.3DP) so I've repeated all this testing on it as well. The G5 doesn't care about the model of drive and boots from any of them using a 10.5.6 install with APM formatted drives.
I've tried all these drives in 4 different models of ADM sled. One thing I have determined is that the model of sled determines if you need to use the 1.5GB/s jumper. I have 2 sleds from G5's, they require the jumper, a 80GB Intel ADM sled with separate data and power plugs requires the jumper, and an Intel 160GB ADM sled with the ribbon cable and combined data/power plug doesn't require the 1.5GB/s jumper. APM vs GPT formatting again makes no difference.
So on the Intel machine, the drives work in the sleds, appear as normal drives on desktop or in Disk Utility when logged in, and also appear as normal drives when connected via SSH if Auto Login is disabled. So to me they appear to be working drives.
It appears to me that something changed at a low level between the Barracuda ES and ES.2 generations of drives (for WD drives as well since the Caviar SE16 that boots is a similar age to the Barracuda ES)
So then why won't it boot from them? Is there some magic dance I've missed?
And how come one of the 7200.12 will boot, while another identical model won't?
Any tips or suggestions greatly appreciated.

I don't have an answer for you, but you deserve thanks for all the useful hardware information you posted from your trial-and-error testing.
My impression has that the XServes need specific kinds of firmware and hardware monitors on their drives in order for everything to function smoothly. My own efforts swapping drives in ADMs has produced "mixed results" to put it mildly. It would be so much easier if we knew what kinds of drives worked properly in what kinds of ADMs and on which Macs/XServes.

Satellite C655D-S5303 will not boot from cd/dvd drive

I have already set the boot order in the BIOS to boot from cd/dvd drive first and it still goes straight to the HDD and starts Windows 7. I searched for this problem and found some people saying to switch it to CSM boot or disable secure boot but none of these options are available in the BIOS. I have it set to normal boot instead of fast so thats not the problem. Can anyone help me here? I am trying to reformat and reinstall Windows 7. I know the Windows 7 installation disk I have is good because I have used it in another computer and the cd/dvd drive works fine. I just can't get it to boot from the cd/dvd drive before the HDD.
Solved!
Go to Solution.

Satellite C655D-S5303
Downloads here.
Try setting the HDD to lowest boot priority. See Dave's solution in this message.
It's certainly easier to restore the hard disk to its original out-of-the-box contents using Toshiba recovery media. All the drivers and utilities are preinstalled in the proper order. Windows is preactivated.
If you failed to burn recovery discs, you can obtain recovery media from Toshiba. Scroll down to Get Recovery Media here
For instructions, see the section Restoring from recovery DVDs/media, which begins on p. 76 of the User's Guide.
Satellite/Satellite Pro C600 Series User’s Guide
If you want Windows 7 Professional, upgrading takes only minutes.
Upgrade to another edition of Windows 7 by using Windows Anytime Upgrade
-Jerry

Satellite C655D-S5303 will not boot from cd/dvd drive

I have already set the boot order in the BIOS to boot from cd/dvd drive first and it still goes straight to the HDD and starts Windows 7. I searched for this problem and found some people saying to switch it to CSM boot or disable secure boot but none of these options are available in the BIOS. I have it set to normal boot instead of fast so thats not the problem. Can anyone help me here? I am trying to reformat and reinstall Windows 7. I know the Windows 7 installation disk I have is good because I have used it in another computer and the cd/dvd drive works fine. I just can't get it to boot from the cd/dvd drive before the HDD.

Satellite C655D-S5303
Downloads here.
Try setting the HDD to lowest boot priority. See Dave's solution in this message.
It's certainly easier to restore the hard disk to its original out-of-the-box contents using Toshiba recovery media. All the drivers and utilities are preinstalled in the proper order. Windows is preactivated.
If you failed to burn recovery discs, you can obtain recovery media from Toshiba. Scroll down to Get Recovery Media here
For instructions, see the section Restoring from recovery DVDs/media, which begins on p. 76 of the User's Guide.
Satellite/Satellite Pro C600 Series User’s Guide
If you want Windows 7 Professional, upgrading takes only minutes.
Upgrade to another edition of Windows 7 by using Windows Anytime Upgrade

Will not boot from CD/DVD drive even with "C" key pressed

I have a G4 with a hard drive that is (apparently) dead. I would like to boot off the CD drive, but that does not work. I press "C", then turn the power on, continue holding down the "C" key, and the hard drive just makes some clicking noises for about 20-30 seconds, then gives up. The computer will not boot at all. Same thing happens when holding down "Option" instead of "C"
Why would the computer not boot off the CD drive?
Any tips would be greatly appreciated. Thanks!
Mike
Mac G4 400 MHz Mac OS X (10.3.9)

Hi, Michael!
If this topic is now "history", please close it out as "answered". If you still have a problem with the AGP G4, still close this topic out and post over in the G4 section and we'll happily help you out over there.
Regards,
Gary

G5 will not boot from system disk or from Tech Tool Pro 5

Hi everyone - Having a bit of trouble and hoped I might find some answers here.
I suspect my system drive was having some issues as it sounded like it was being taxed and strained as I would open up applications from it. Upon verifying the disk using Disk Utilities, the test would stop short with the following message:
First Aid Failed
Disk Utility stopped verifying "Macintosh HD" because the following error was encountered
Filesystem verify or repair failed
In addition, an error message came up (in red) on the disk utility screen as well saying:
Volume header needs minor repair
The volume Macintosh HD needs to be repaired
Error: Filesystem verify or repair failed
Normally from here, I'd start up the computer from the Tech Tool Pro 5 disk (holding down C key upon restart). But when I did this, the computer never responded. Instead, the power was on but the screens went black and the computer went into a very quiet "idle" mode.
After about a minute, the fans began ramping up pretty high (and loud). This went on until I finally had to manually shut down the computer by holding the power switch down for a few seconds. I didn't know what else to do. Those fans were not coming down (not even after 10 minutes).
Anyway, I pushed the power button again and held the C key down. Still, nothing.... The fans stayed idle, for a little while and then ramped up again just like last time. I hit that same dead end and powered down the computer via the power button.
Is there an alternate way to boot the computer from Tech Tool Pro or the original start up disks? I'm having no luck, here.
I'm on my way into town to purchase a new internal drive (something with about 1TB of space) so that my pro apps can swim a little instead of being being bogged down on a 250G drive.
Thanks for any assistance, folks!
Oh yeah.... Happy New Year to everyone!!
Steve

The Install disk has version 10.4 on it. I have also tried booting from my OS 10.5 disk but with no avail.
However, here is an update on my plight.
Apple tech says that after hearing the symptoms, he thinks that one of the processors is shot. Being that my particular model of G5 (dual 2.7 processors) is a liquid cooled machine, it's possible that some sort of leak has formed and has either taken out a processor or has caused a processor to overheat. He says that this model of G5 has been known to do that. In this case, nothing will boot which makes me think that my original system drive may actually be okay. I'm taking it in for the tech to look at it and just be sure that's the problem. However, if it is a dead processor, the part alone would run $799 plus labor to install it. Frankly, that's just too much for me to pay to keep this old G5. I'd rather put that money towards a new or reconditioned Mac Pro 8 core or quad core machine.
I've owned several Mac computers in the past and perhaps this is the frustration talking but it seems that no matter how diligent you are in maintaining your Macintosh, these machines only seem to last about 5 years before something majorly wrong happens (mother board, processor, etc). Can I expect this same, limited time frame from a new Mac Pro? I mean, am I just being paranoid?

Restore Disc Will Not Boot From External DVD Drive

I am using an original MacBook Pro that I decided could use a good restore, and started to clean house. The optical drive is broken, so I am using an external USB drive. I inserted the restore disc that came with the computer (It has OS X 10.4.6 on it), erased my HD, and proceeded to install Tiger. However, setup froze while installing Photobooth, and I was forced to shut down the computer.
I'm trying to get my Macbook Pro to boot from the restore disc that came with it so I can try setup again, but it won't work. If I hold C during the boot, I get a flashing folder with a question mark over it. If I hold option, I get a cursor, but just a blank, gray screen. In both instances, the external DVD drive is active and reading the disc, but I'm not getting any results on the screen. I've also reset PRAM.
If I can just get my computer to boot from the disc, I should be able to get back on track. Thanks.

When I press option during boot, nothing happens. Just a gray screen and cursor, like I described above. I haven't been able to test the external drive yet on another mac to see if it is bootable because I can't find the other computer's boot disc at the moment, but I'll try later with something else.
I have been able to access the drive through Target Disk mode successfully though. Is there something in particular I should do with the files? The folders are:
Applications
cores
dev
etc
Library
OSInstall.mpkg.998YblbM
System
tmp
Users
var
Volumes

Intel Xserve will NOT boot from hard disk drive

Similar Messages

Maybe you are looking for