Intell usb 3 problem with windows 8.1

hii bought a Lenovo g510 and installed windows 8.1all driver work fine but 2 port usb3 ins't work and usb2 port is good workuninstall intel usb3 extensible host controller and restart system i searched in my cd driver but i can't find nay usb3 driver for lenovo g510in support page lenovo g510 usb 3 is not list windows 8.1 but was windows 7 !! Intel(R)USB3.0eXtensible Host Controller -0100(Microsoft)USB Root Hub (xHCI)

Hi,
Have you also tried to disable power management on wireless network connection adapter? Since some OEM computers also combine some features of Bluetooth to wireless network connection adapter.
This issue can be mostly caused by drivers. Please contact the menufacturer's to see if the latest driver is compatible with Windows 8.1.
If not, I suggest you find the driver for Windows 8 /7 and install it in compatible mode in Windows 8.1 to see what's going on.
Also, post back the C:\Windows\Inf\setupapi.dev.log and event log you can find in event viewer related to this issue here for our research.
Kate Li
TechNet Community Support

Similar Messages

Problems with Windows 7 home premium and ovi

Excuse me for my english.
I've a big problem with Windows 7 and NOKIA N97 32G
I install the latest version of Nokia Ovi Suite 2.0.2.42. When I connect the phone with USB and select PC suite mode in the phone, OVI don't see the phone and say method not compatible.
I can't synchronize the phone.
Help me.
Thanks

I just want to say that many Nokia Ovi Suite problems have showed up for me recently. I tried everything (including many reinstalls, cleans, etc.) and nothing helped.
Finally I found the solution:
I realized that I have installed Service Pack 1 on Windows 7 (32-bit), and this stopped Ovi Suite from working correctly. The solution is to run Ovi Suite in compatibility mode as "Windows 7"
(You may be surprised to run an application in "Windows 7" compatibility mode on Windows 7. But after installing Service Pack, it is no longer "Windows 7" but it is now "Windows 7 SP1"! This is different. So "Windows 7" is the old mode without the service pack, and in this old mode Ovi Suite works.)
Concluding: After installing Service Pack 1 just use compatibility mode as "Windows 7" to run Ovi Suite, and this program should work OK (at least for me it works on a 32-bit OS).
PS. My version of Ovi Suite is 3.0.0.290

IPhone 3GS SYnc problems with Windows 7 64 Bit

I am having sync problems with windows 7 64 Bit.
The iPhone syncs a few tracks then hangs, a few minutes later itunes tells me the iphone has timed out.
Anyone have any ideas about this. I have tried different USB ports, cleaned the apple USB cable contacts with Servisol, restored the iPhone and reinstalled itunes.
iPhone and iTunes are latest versions.
Thanks
Joe

"Try this connect the iPhone, let the mtp driver installation fail, then go into the device manager and uninstall the unknown mtp device. If you then scan for new hardware from the device manager it should recognize the iPhone & update the driver."
Ok here's what I did:
1) Connect the iPhone (iTunes had been installed)
2) No MTP driver installation is happening as Windows detects iPhone successfully
3) Open Device Manager
4) There seems to be 2 drivers for iPhone that are active now, although I still can't see which one is the MPT driver you're referring to.
One of them sits under Portable Devices: "Apple iPhone". If I view the details of this driver, it lists the following files:
- C:\Windows\system32\DRIVERS\UMDF\WpdMtpDr.dll
- C:\Windows\system32\DRIVERS\winusb.sys
- C:\Windows\system32\DRIVERS\WUDFRd.sys
- C:\Windows\system32\WpdMtp.dll
- C:\Windows\system32\WpdMtpUS.dll
The other one sits under Universal Serial Bus controllers: "Apple Mobile Device USB Driver". And as indicated by Joe above, it lists the following files when I view the Details:
- C:\Windows\system32\Drivers\usbaapl64.sys
- C:\Windows\system32\usbaaplrc.dll

USB problem with msi (nforce 1)k7d420

USB problem with msi (nforce 1)k7d420
i encountered problem when using my apacer audio steno mp3 player with my nforce(which i don`t hav any problem when using with any VIA chipsets)
it detects and install the device automaticly but when i want to access it,it just gives me error msg
windows xp pro service pk1
nforce nvidia drver v2

http://www.nforcershq.com/forum/viewtopic.php?t=30003
may be ive not loaded it yet

USB Problem with iMac

I have a USB problem with a 2007 iMac.
It appears that 1 of the usb ports is faulty, when in OS X 10.6.2 I constantly get "because a usb device is drawing too much power" popup. Usually 3-5 popup eventually.
I used Boot Camp to boot into Windows 7 and Device Manager can see the ICH8 Family USB Universal Host Controller - 2832 as a problem. I can disable it without an problems.
The question is: Is there any way to either disable that pop-up warning in Os X or disable that specific port so I don't get the pop-ups.
I performed all updates and things like PRAM reset and SMC reset.
Its not under Apple Care if your wondering.
Thanks,
Message was edited by: DrWickman

So does that mean all the ports work properly, even after getting that message?
If you start up from your Mac OS X installation disc (a different Mac OS X system), do you still get this error message? You can do so by inserting the disc and restarting with the C key held down. When you get to the Installer screen, you can do things like run Disk Utility from the Utilities menu. Does that message still appear?
Also, you said you reset PRAM and SMC, but make sure you followed these procedures
http://support.apple.com/kb/HT1379
http://support.apple.com/kb/HT3964
Apple recently changed the procedure a bit. While going through it disconnect ALL cables. If you have been connecting the iMac to a crowded or old power strip, connect to directly to a wall outlet, at least during this test. Power it up initially with nothing connected, except the power cord. Note if that message appears. If it does not, connect just your keyboard/mouse, use it that way for a while, and note if that message appears. If all is well, connect the remaining peripheral devices.
I don't know of a way to disable that message without disabling all the USB ports.

Problem with windows and my monitor in after effects

HI . before any thing excuse me for speeking english.
i have a problem with windows in after effect in my monitor
my monitor is 15.6 and resolution is 1366*768
for example when i open interpret footage window i can't see that complete and amount of size window dont visible.
Thanks.

Your system doesn't meet the requirements and that is that. AE has required 900 pixel height ever since CS4. Other than changing your screen res or shuffling around windows there is nothing you can do.
Mylenium

Hi anyone having a problem with windows 7 and itunes

Hi has anyone had a problem with windows 7n and Itunes...My Itunes was working now wont open says files missing reinstall...which I have done several times also other programs that were working now have error message your side by side configuration isnt correct any ideas!!!

Yes, I am also having trouble with my windows 7n. I tried to install the download but it didn't have 32 bit for my computer and I don't think it will help me see my phone on my external devices. I can't transfer my photos. Any help would be appreciated.

Problems with Windows XP SP3 in Boot Camp

Hi,
I have recently received a 21.5" iMac; it is the higher-end of the 21.5" standard configurations. The problems I am having, I believe, specifically relate to drivers.
Firstly, I get no sound whatsoever in Windows XP SP3 (boot camp); I have tried removing and reinstalling the drivers from the Snow Leopard install disc, but no success. I have no yellow question marks in the device manager window, but the absence of audio still persists.
Secondly, I cannot gain access to the special functions of the Apple wireless keyboard in Windows XP SP3 via Boot Camp. Again, I have tried reinstalling the drivers, but no success. I have read an Apple support document which states that the keys are only supported on late 2009 Macs; I own one of these Macs, so that cannot be the problem.

Problems with Windows XP SP3 in Boot Camp
Boot Camp forums are here: http://discussions.apple.com/category.jspa?categoryID=237

I am having a problem with Windows Fusion installed on a MacBook.

I am having a problem with Windows Fusion installed on a MacBook OS 10. When attempting to use a Browser, (either IE, or Chrome), under Windows Fusion, I cannot browse to ANY page except Gmail.com.
I checked all security settings, and found no problem. Neither browser will allow me to do ANYTHING other than go to Gmail.com!!!
I am not sure if I have some virus on my Windows side, because Google and Safari both work perfectly on my Apple side, just not when running Windows Fusion.
Is there some setting I am missing, or do you think I have malware/virus issues?? My Internet connection is DEFINITELY working fine - I can send, receive, open, and close all my email on Gmail only, and can navigate freely on Gmail, but cannot get to any other site even hyperlinked to Gmail.
Any help would be greatly appreciated.
Thank you very much.

HartEJ wrote:
...Neither browser will allow me to do ANYTHING other than go to Gmail.com!!!...
If you've already tried my previous suggestions, it may be that something has tampered with the DNS settings in your Windows VM, which might bypass the settings your Mac uses. Assuming you're using Windows 8, these instructions explain how to check and change the DNS settings. There's also a link in those instructions listing a variety of suggested DNS settings. If you do try changing the settings, record what the settings currently are in case you want to return to them.

Looking for a site that shows problems with windows patches or updates.

Looking for a site that shows problems with windows patches or updates...so I know what not to install.
Plenty of sites list and summarize individual patches, I want one that consolidates problems and complaints so I can better assess the risk. Currently I'm waiting to install patches several days and doing google searches. That works, but I'd rather find a place
that does it with expertise.
Which forums would be best to look for such problems.
Thanks in and advance for suggestions

Hi,
I agreed with Cyber and Rick.
Windows update helps to keep your PC safer—and your software current—by fetching the latest security and feature updates from Microsoft via the Internet.
Although there might be some problems when installing it, Windows update is not the one to blame.
For troubleshooting Windows updates, if needed:
Fix Microsoft Windows Update Issues
http://support2.microsoft.com/gp/windows-update-issues
Best regards
Michael Shao
TechNet Community Support

Has anybody had the following error while trying to download iTunes 10.5? There is a problem with Windows Installer package. A program required for this install to complete could not be run.

Has anybody had the following error while trying to download iTunes 10.5? There is a problem with Windows Installer package. A program required for this install to complete could not be run.

Go to "control panel" then "add or remove programs". Highlight "Apple software update" Choose "change" click "Repair" This should do the trick. Then download and install iTunes 10.5 again.

Tried to install iTunes 10.5 this morning but an error appeared saying "problem with windows installer package. A program required for this install to complete could not be run." Can someone please help

I tried to install iTunes 10.5 this morning but an error appeared saying "problem with windows installer package. A program required for this install to complete could not be run." Can someone please help

Firstly, are you installing iTunes for the first time or are you updating your current version of iTunes?
If you're installing iTunes for the first time have you tried redownloading the installer package? Perhaps the file you downloaded originally is corrupted...
http://www.apple.com/itunes/
If you've tried that, then try installing iTunes as your computer's administrator. To do this right-click the install package and choose "Run as administrator".
If you're updating iTunes to the most recent version try repairing the Apple Software Update program on your computer. It's under the add/remove programs.
1. Open the control panel
2. Open Add/Remove programs (called "Programs and Features" in Windows 7)
3. Navigate to "Apple Software Update" in the list and click on it
4. Click on "Change" then select "Repair" (or just select the repair option in Windows 7)
Once you repair this, try running iTunes and the update again.
Fingers crossed!

Problem with Windows Media Player since installing Firefox 4.0

Problems with Window Media Player. When I am using Windows Media Player to view a video from another source I am having problems. When I hit pause and then go back to hit play it does not have any sound. The player is not on mute and it keeps going from pause to play with no sound most times. Please help. Thank-you. I have Windows Vista programs.

What can I do to get the Windows Media Player to work properly?

Problems with Windows VISTA and WPA-2

Hi Guys,
I am using a Linksys router supporting draft-N; it seems that after some time of usage; Windows Vista stop being able to connect to Linksys using a WPA-2 PSK.
Everytime you search for the SSID and attempt to connect, the ''network is taking too long to connect''' and Windows always informs the user that ''limited or no connectivity'' even though the signal strength is excellent.
Is that a common problem in Windows Visa (I am using Home Edition)?

Yes thats the basica command problem with Windows Vista while connecting to the Wireless Network.... In this you can need to update your Windows Vista OS with all the Latest Patches and the Service Pack to improve more stability on your Vista Computer to get connected to the Wireless Network..

Photo sync problem with Windows Vista?

I did some searching and was wondering if there is a solution to the photo sync problem with Windows Vista. I have gone the route of changing some of my photos to bitmap files but this is was way too much work just to view on ipod. I like to email Apple but could not find a link to do so. As far as I know I have all updates but still the iPod does not sync photos. Is there an update to this that I am missing or am I stuck changing all my photos to .bmp files?
Thanks,
Dean.

I checked out the article and not much help, thanks anyway.
Would it make a difference if I purchased Adobe Photo Album or would I still be stuck with changing and saving files to .bmp extensions? I have Adobe Photoshop album starter but still have to change file extensions.
If someone has a solution to this problem I would really be greatfull. I did contact Dell as this is a brand new computer and that was a wash. They did give me a number for Apple but of course I bought the iPod off of ebay and has no warranty on it so unless I pay a fee I'm not calling. It just blows my mind that Microsoft and Apple can't or won't come up with a fix. But I guess when Microsoft wants you to buy the Zune or Apple wants you to buy the overpriced Macintosh why would they waste time on having there products compatible with each other.
Thanks.

Problem with Windows 8.1 and Corseca Byte BT headset

I recently bought a Corseca Byte bluetooth headset.
The headset works fine with phones.
Initially when connected to the laptop running windows 8.1 it works well and continues to flawlessly for hours.
The problem is when the headset is connected to the laptop but there is no audio streaming (e.g paused a movie playback for attending some other job) and resume playback after 10-15 minutes the audio starts stuttering/ becomes choppy. If I switch off the headset
and restart it works fine unless it lays unused for some time.
Windows recognizes the device correctly. I've turned off power management for BT devices and tried to update the drivers without any positive result.
Initially I thought the headset was defective but since it works flawlessly with phones I think it is a problem with Windows 8.1.
How to solve the issue?

Hi,
Have you also tried to disable power management on wireless network connection adapter? Since some OEM computers also combine some features of Bluetooth to wireless network connection adapter.
This issue can be mostly caused by drivers. Please contact the menufacturer's to see if the latest driver is compatible with Windows 8.1.
If not, I suggest you find the driver for Windows 8 /7 and install it in compatible mode in Windows 8.1 to see what's going on.
Also, post back the C:\Windows\Inf\setupapi.dev.log and event log you can find in event viewer related to this issue here for our research.
Kate Li
TechNet Community Support

Intell usb 3 problem with windows 8.1

Similar Messages

Maybe you are looking for