Intelligent Agent doesn't work
Hi dear colleagues,
I got a problem with the Intelligent Agent.
I installed Oracle 8i EE 8.1.5 and OEM 2.1 on Windows 2000 server. When I
try to discover the databases with OEM, OEM could only find the node, it could
not find any database. So I thought maybe the Agent got some problem. I
opened the log file nmiconf.log, the following is the message in it:
DBSNMP for 32-bit Windows: release 8.1.5 - Production on 13-MAY-02 20:04:18
Warning : Listener LISTENER defined in H:\Oracle\Ora81\network\admin\listener.ora will be skipped because, it does not have a corresponding NT service entry
Warning : Skipping OracleOraHome81TNSListener : Couldnot find corresponding listener definition in {H:\Oracle\Ora81\network\admin\listener.ora}
Warning : No Listener found for SID SIDDB1. SIDDB1 will be skipped
Warning : No Listener found for SID SIDDB3. SIDDB3 will be skipped
But I don't know where and how to create a NT service entry corresponding to
the listener LISTENER. Please help me!
Thanks!
Wendell
I think there is no problem with the intelligent agent. It seems to be a problem with your net8 configuration. I think the problem could be caused by several reasons:
1. Your listener is not configured properly: the listener.ora file should contain a valid service entry for the database (you can do this with the net8 assistant provided by oracle. Normally it should be installed by default)
2. The agent looks in the wrong listener.ora file for a service entry. So do you have more then one ORACLE_HOME and more the one listener.ora file on the node?
3. Do you have more then one network interface and are you working with more then one hostname alias? That could also cause a problem. It could be a solution to replace the hostname in the host=name part of the listener.ora file with the right!! IP adress. May be you have to test all the IP adresses of your node.
Similar Messages
-
Intelligent Agent doesn't recognise database
I've got a database under ORA 8.1.7. The Net8 Manager was replaced by Net Manager when I installed the version 9i migration assistent. So the listener is configured by this newer version. I copied the listener.ora file in the correct Oracle Home directory but still the intelligent agent refuses to recognise the database. OEM fails to show the database in return and thus I'm not able to backup the DB, e.g.
Thanks for your help,
Claus.Problem solved by uninstalling Oracle completely (why doesn't it remove itself from the registry?) and installing it again.
Now I've got another problem. See new thread.
Claus. -
Chat with an agent doesn't work
I have been trying for the last hour to get into the chat with an agent feature, does this feature work? Has anyone else used it?
So I've been trying for the last hour on my new Intel iMac using Safari and the browser Window just hangs ... Maybe I should get my Windows laptop out and use IE?
-
Hello,
I have been trying to install SMD Agent in my BI system but Solution Manager can't check it, this is the message in Solman_setup
Wilyhost Agent configuration finished without errors, but on Enterprise Manager (sapl917.intra.banesco.com:6001) no Wilyhost Agent was detected from host svs978. Please check the log file jvm_smdagent.out whether the Wilyhost Agent could connect to the Enterprise Manager. If the Enterprise Manager configuration has been changed recently please restart the SMD Agent on OS level.
Step Wilyhost Agent Details
Created destination QBB|svs978_QBB_01
Created action QBB - QBB AbapSystem
Created action QBB|svs978_QBB_01 - QBB|svs978_QBB_01 AbapInstance
Created 2 action(s).
0 Wilyhost Agent(s) from host svs978 are connected to the EM.
Wilyhost Agent configuration finished without errors, but on Enterprise Manager (sapl917.intra.banesco.com:6001) no Wilyhost Agent was detected from host svs978. Please check the log file jvm_smdagent.out whether the Wilyhost Agent could connect to the Enterprise Manager. If the Enterprise Manager configuration has been changed recently please restart the SMD Agent on OS level.
do you know something??? i restarted the agent but nothing happens
Thanks!!!!Hello...
For JAVA
Software Components
Vendor Name Version Provider Location Applied
sap.com ADSSAP 7.01 SP4 (1000.7.01.4.0.20090417021200) SAP AG SAP AG 20091103161136
sap.com BASETABLES 7.01 SP4 (1000.7.01.4.0.20090417015900) SAP AG SAP AG 20091103153957
sap.com BI_MMR 7.01 SP4 (1000.7.01.4.0.20090417021807) SAP AG SAP AG 20091103161215
sap.com BI_UDI 7.01 SP4 (1000.7.01.4.0.20090416221700) SAP AG SAP AG 20091103162333
sap.com CAF 7.01 SP4 (1000.7.01.4.0.20090417194106) SAP AG MAIN_NW701P04_C 20091103163937
sap.com CAF-UM 7.01 SP4 (1000.7.01.4.0.20090417194111) SAP AG MAIN_NW701P04_C 20091103161325
sap.com CORE-TOOLS 7.01 SP4 (1000.7.01.4.0.20090417021948) SAP AG SAP AG 20091103154019
sap.com ISAGENT 8.1 SP0 (8.1.0.0.20090605095817) SAP AG SAP AG 20091210142716
sap.com JLOGVIEW 7.01 SP4 (1000.7.01.4.0.20090417020000) SAP AG SAP AG 20091103154104
sap.com JSPM 7.01 SP4 (1000.7.01.4.2.20090918151100) SAP AG SAP AG 20091201201543
sap.com KM-KW_JIKS 7.01 SP4 (1000.7.01.4.0.20090514115300) SAP AG SAP AG 20091103161349
sap.com LM-SERVICE 7.01 SP5 (1000.7.01.5.2.20091211060559) SAP AG SAP AG 20091224192630
sap.com LM-TOOLS 7.01 SP5 (1000.7.01.5.3.20091208123420) SAP AG MAIN_NW701P05_C 20091228135344
sap.com SAP-JEE 7.01 SP4 (1000.7.01.4.1.20090612152648) SAP AG SAP AG 20091103154150
sap.com SAP-JEECOR 7.01 SP4 (1000.7.01.4.0.20090417015900) SAP AG SAP AG 20091103154414
sap.com SAP_JTECHF 7.01 SP4 (1000.7.01.4.2.20090612144700) SAP AG SAP AG 20091103154520
sap.com SAP_JTECHS 7.01 SP4 (1000.7.01.4.2.20090612152905) SAP AG SAP AG 20091103162132
sap.com SWLIFECYCL 7.01 SP4 (1000.7.01.4.0.20090511115334) SAP AG MAIN_NW701P04_C 20091103151458
sap.com UMEADMIN 7.01 SP4 (1000.7.01.4.0.20090417195012) SAP AG MAIN_NW701P04_C 20091103165828
For ABAP
SAP_BASIS 701 0004 SAPKB70104
SAP_ABA 701 0004 SAPKA70104
ST-PI 2008_1_700 0001 SAPKITLRD1
PI_BASIS 701 0004 SAPK-70104INPIBASIS
CRMUIF 500 0003 SAPK-50003INCRMUIF
SAP_BW 701 0004 SAPKW70104
SAP_AP 700 0016 SAPKNA7016
BBPCRM 500 0015 SAPKU50015
CPRXRPM 400 0015 SAPK-40015INCPRXRPM
ST 400 0021 SAPKITL431
BI_CONT 704 0004 SAPK-70404INBICONT
ST-A/PI 01L_CRM570 0000 -
ST-ICO 150_700 0022 SAPK-1507MINSTPL
ST-SER 701_2008_2 0005 SAPKITLOQ5
LM Components were updated for EHP1 SPS21, I installed SMD Agents in DEV and some QA servers and they work, but this one specially works as a fail over for a PRD cluster enviroment, and for that reason I'm using logical name, in SMSY it is configure with the same name, do you have any ideas?
Thanks!!! -
Hi,
I've created an agent with Lingon. It loads but the script failed with the following errors in system.log
Jan 4 20:02:52 dchambon launchd[3231]: fr.dchambon.MontageAuto: exited abnormally: Broken pipe
Jan 4 20:02:52 dchambon launchd[3231]: fr.dchambon.MontageAuto: 4 more failures without living at least 60 seconds will cause job removal
Here is the script :
#!/bin/sh -x
OutilsPAO=`df -t afpfs | grep -q Outils ; echo $?`
if [ $OutilsPAO == 1 ] ; then
mkdir '/Volumes/Outils PAO'
/sbin/mount_afp "afp://pao:INFOPUB@XServPao/Outils%20Pao" '/Volumes/Outils PAO'
if [ $? -ne 0 ] ; then
echo -e "" | mail -s "Montage Launchd - Echec du montage de \"Outils PAO\"" [email protected]
fi
fi
Echanges=`df -t afpfs | grep -q Echanges ; echo $?`
if [ $Echanges == 1 ] ; then
mkdir '/Volumes/Echanges'
/sbin/mount_afp "afp://pao:INFOPUB@W2SSINFOB01/Echanges" '/Volumes/Echanges'
if [ $? -ne 0 ] ; then
echo -e "" | mail -s "Montage Launchd - Echec du montage de \"Echanges\"" [email protected]
fi
fi
exit 0
Only the first mkdir command is executed
And the plist situated in ~/Library/LaunchAgents :
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>fr.dchambon.MontageAuto</string>
<key>ProgramArguments</key>
<array>
<string>/bin/sh</string>
<string>/Users/dchambon/Scripts/Shell/MontageAuto.sh</string>
</array>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Any idea ??
Regards
Didier.Hi Didier,
I like your MontageAuto.sh script; I've not seen df used that way. If the AFP shares are not mounted, does the script work when run in the command line as dchambon? The only possible syntax error I see is that you didn't use fully-qualified domain names for the servers, XServPao and W2SSINFOB01. It is possible that your dchambon user has a search domain preference. As a consequence, the mount_afp commands may work only after that preference takes effect. Naturally, it's possible that that preference is not set at the time the Launchd job is run.
I don't think that RunAtLoad is a mode in which you can run this type of job. RunAtLoad is used to start daemons that run continuously. In fact, Launchd is expected to relaunch the daemon if it quits, which is why you get the error message, "fr.dchambon.MontageAuto: exited abnormally: Broken pipe." One would think that the script would run at least once but I've heard reports of other scripts failing under these circumstances.
Unfortunately, I don't have a good alternative to RunAtLoad. I would try just removing that key and its value. You could also make the script a LoginHook. To that end, you might find the following article useful, Mac OS X: Creating a login hook. Of course the LoginHook would be run as root.
Gary
~~~~
Emacs, n.:
A slow-moving parody of a text editor. -
Has Anyone gotten the Intelligent Agent to work???
I have Oracle installed and all is well except for a few minor
problems that I think the Intelligent Agent will solve. Has
anyone gotten this to work on RedHat 6.0 with Oracle
Enterprise Edition 8.0.5.1??? I was able to get it to work
under Oracle8 SE, but I need EE for the ConText Cartridge.
I have gotten to the point where I can get the dbsnmp process
running, but OEM cannot talk to it.
Please help
--Bryan
nullI'm having the same problem. Does anyone out there have a
solution?
I am running RedHat Linux 6.0 straight out of the box. The only
change I made was to set the kernel parameters according to the
release notes and recompile the kernel.
P.S. Oracle deserves our thanks for providing free developer
licenses to so many of its products, but this is the buggiest
install I've ever seen in my 12 years of working with their
products. Didn't anyone from Oracle test the install? This
problem and the zero length libnjni8.so file are the real
doozies.
I've followed the release notes and installation guide to the
letter and have found several documentation / distribution bugs
that should have leapt out at the first person who tried it.
Thorsten Khnemann (guest) wrote:
: Bryan Batchelder (guest) wrote:
: : anyone else who could not get it to compile with TCL 7.5 to
: : please at least let me know other people are having the same
: : problem.
: Same problem here, the
: "gmake -f ins_oemagent.mk agent" gives the message
: "gcc: unrecognized option
: `-R/home/oracle/run/product/8.1.5/lib/'" and hundreds
: of unresolved references.
: Tested on RedHat 6.0, egcs 1.1.2
null -
We are running TFS2012 Update 4 and have set up some build alerts. The alert we have set up is "A build controller or agent's status changes". When this alert is first set up the default filters which are included are for fields "Team
Project" and "Status". However through much testing we have discovered that when either of these fields are included as a filter the alert doesn't work. When other fields are used in the filter the alert works fine (as long
as neither of the stated fields are included), indeed if all alert filters are removed then the alert also works successfully. Has anyone else experienced this? Is there an issue with the fields "Team Project" and "Status"?Hi T Quinn,
Thanks for your post.
I reproduced this scenario in my TFS 2012 Update 4 Server and received the same result.
For this scenario, please submit it to Microsoft Connect Feedback portal at:
https://connect.microsoft.com/VisualStudio. Microsoft engineers will evaluate them seriously.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
SSH Agent in GNOME Doesn't Work
Hey There,
I'm using GNOME for my personal desktop needs.. I have to connect to several remote server (or PC's) in a shell and I don't want to re-enter my passwords in the same session. This is my problem:
[14:28] (tunix@penguix ~)$ ps aux |grep ssh
root 6264 0.0 0.0 3756 816 ? Ss 09:03 0:00 /usr/sbin/sshd
tunix 6457 0.0 0.0 3400 508 ? Ss 09:05 0:00 /usr/bin/ssh-agent -- /usr/bin/gnome-session
tunix 19141 0.0 0.0 3428 784 pts/2 R+ 14:28 0:00 grep ssh
[14:28] (tunix@penguix ~)$ ssh tunix@kulupler
Enter passphrase for key '/home/tunix/.ssh/id_rsa':
Last login: Sat Sep 29 14:22:37 2007 from 85.97.128.179
[14:26] (tunix@kulupler ~)$ logout
Connection to kulupler closed.
[14:28] (tunix@penguix ~)$ ssh tunix@kulupler
Enter passphrase for key '/home/tunix/.ssh/id_rsa':
[14:28] (tunix@penguix ~)$
So SSH Agent doesn't cache or save the passwords I enter.. So I have to enter the password each time. (Maybe this is happening because of the same reason why Seahorse doesn't working on my system.. :S)
Thanks for any replies..Did you run ssh-add to tell ssh-agent which key to use ? If not, ssh-agent will not know anything about any keys/pass phrases you enter into specific ssh sessions.
There's a pretty good tutorial here, with all the basic steps :
http://mah.everybody.org/docs/ssh
WRT seahorse...
Is seahorse-daemon running ? I haven't used seahorse, so I only have the following as a reference :
http://live.gnome.org/Seahorse/SSHAgent -
After change to Mavericks my Mac become too slow e I can't use it because stays asking passwords for "talagent" and "messages agent" as icloud keys. I got changed the icloud password many times and still doesn't work. I can't open any program.
Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access. -
Oracle intelligent agent executable has encountered a problem and needs to
Hi All,
I am getting the following message after commence of OS (windows XP) on my LAPTOP.
"Oracle Intelligent Agent Executable has Encountered a Problem and needs to close."
due to the above problem it takes time to be fit to start working. that is; when i start my laptop then it gets ready very shortly but just later on it is seen that my laptop gets to be hanged. it seems that some background process runs and during this time nothing can be done on my laptop (even REFRESH - F5 doesn't respond). then after some time the above message comes. this process seems to be very much annoying.
there is a small Oracle database (9i) in my laptop along with Oracle developer (10g).
Thanks in advance.Hi Tapash,
You probably don't want/need that service to run anyway. So go to your control panel/Adminstrative Tools/Services
and set Start Type to Manual for Oracle<ORACLE_HOME_NAME>Agent service
[OIA Users Guide|http://lbdwww.epfl.ch/f/teaching/courses/oracle9i/em.920/a96676/toc.htm]
Regards
Peter -
Intelligent Agent 8.1.6 and Enterprise Manager 8.1.7
I installed the Oracle 8.1.7 Enterprise Manager on Windows 2000 and want to connect to a database on a Dec-Unix system. My Problem: On the Unix-Server there is installed an 8.1.7 Database, but the 8.1.6 Intelligent Agent. Is it possible, and how can I get the information, wich Agent is running?
I think, I cannot connect with a never version of Enterprise Manager to an older Agent. Is this correct?jrh (guest) wrote:
: antp (guest) wrote:
: : Hi!
: : I try to start Intelligent Agent 8.1.5 under RH6.0 and got...
: : nothing! Absolutly nothing! lsnrctl exits with no messages...
: : $ lsnrctl dbsnmp_start
: : LSNRCTL for Linux: Version 8.1.5.0.0 - Production on
26-OCT-99
: : 16:33:07
: : (c) Copyright 1998 Oracle Corporation. All rights
: reserved.
: : $
: : It displays no output, no logs -- nothing, even if I
configure
: : listener to trace_level=16. It doesn't write snmp_ro.ora nor
: : snmp_rw.ora files...
: : I have tcl 8.0 installed with Linux, and it works perfectly.
: What
: : should I do to start Intelligent Agent? Should I install tcl
: 7.5
: : as recommended by Oracle?
: : Thanks, Anthony
: : p.s. Sorry for my English :)
: The only file from the TCL 7.5 distribution that you need is
: libtcl7.5.a. After you build the library and copy it to
: your ?/network/lib directory, the rest of the 7.5 distribution
: can be safely deleted to eliminate conflicts with later TCL
: versions.
It doesn't work. I've compiled tcl 7.5 and copied the
libtcl7.5.a
file to $ORACLE_HOME/network/lib directory, and got the same
result as I've wrote above -- lsnrctl exits with no messages.
Does anybody has any ideas?
Thanks, Anthony.
null -
Missing lsnrctl Intelligent agent after installed patch81501
Dir Sir,
I don't know how to solve out this problem ! I need to start the
agent:
%lsnrctl dbsnmp_start
This file should be under $ORACLE_HOME/bin, at this time the
file cannot executables and renamed "lsnrctl.pre-81501"
If you know how to fix it please send e-mail to me !!
Thank You so much !
Best of Regards,
Simon Ma
nullHad the same problem.
Previous message posted here from a guy named bradley:
go to $ORACLE_HOME/network/agent/library
change ownership (chown) from root to oracle on file -
pkgIndex.tcl
This worked for me... on S.u.S.E 5.3
- Bradley
This solved my NMS-00315 problem and allowed my to start and
stop the agent.
Holger Koenig (guest) wrote:
: Hi everybody,
: before patching to 8.0.5.1.0 I got the well known Intelligent
: Agent error when checking the status with LSNRCTL:
: the db subagent is not started
: Checking dbsnmpw.log showed:
: NMS-00315: Message 315 not found; No message file for
: product=network, facility=NMS
: After applying the patch DBSNMP still doesn't start, only the
: log message changed to:
: NMS-00315: Failed to create package index
: I'm running on SuSE 6.0 and everything is fine except ... .
: Does anybody have an idea?
: Thanx a lot
: Holger
null -
Install Intelligent Agent with 11i Applications
Hi all !
I want to manage centrelize three 11i applications of three enterprises on linux plaftform, but Intelligent Agent was not installed with 11i installation. So, how can i install Intelligent Agent on that environments to discover nodes on Oracle Management Server. I user OMS 9iR2, Windows plaftform.
Thanks and regards !jrh (guest) wrote:
: antp (guest) wrote:
: : Hi!
: : I try to start Intelligent Agent 8.1.5 under RH6.0 and got...
: : nothing! Absolutly nothing! lsnrctl exits with no messages...
: : $ lsnrctl dbsnmp_start
: : LSNRCTL for Linux: Version 8.1.5.0.0 - Production on
26-OCT-99
: : 16:33:07
: : (c) Copyright 1998 Oracle Corporation. All rights
: reserved.
: : $
: : It displays no output, no logs -- nothing, even if I
configure
: : listener to trace_level=16. It doesn't write snmp_ro.ora nor
: : snmp_rw.ora files...
: : I have tcl 8.0 installed with Linux, and it works perfectly.
: What
: : should I do to start Intelligent Agent? Should I install tcl
: 7.5
: : as recommended by Oracle?
: : Thanks, Anthony
: : p.s. Sorry for my English :)
: The only file from the TCL 7.5 distribution that you need is
: libtcl7.5.a. After you build the library and copy it to
: your ?/network/lib directory, the rest of the 7.5 distribution
: can be safely deleted to eliminate conflicts with later TCL
: versions.
It doesn't work. I've compiled tcl 7.5 and copied the
libtcl7.5.a
file to $ORACLE_HOME/network/lib directory, and got the same
result as I've wrote above -- lsnrctl exits with no messages.
Does anybody has any ideas?
Thanks, Anthony.
null -
Livid with Apple - It just doesn't work. EVER
Hi Guys,
As the title suggests I am beyond aggrevated with Apple. But in the interest of healthy blood pressure and actually solving the problem; I will now continue with the problem at hand.
I have through the years provided support for clients who own Apples, and I have through many years of frustration (due to illogical, broken and unnecessary Apple software functions) and oh so many forum visits solved their problems to their satisfaction.
This one takes the cake however.
My client recently broke the glass of his iPad (64Gig) and is now unable to navigate around. He did however buy an ipad mini(16Gig) for his son afterwards and now wants all the kiddie apps loaded onto his sons. I proposed that we perform a backup of his iPad in iTunes and then just restore to the iPad mini as some of his apps was bought in Mauritius and are nor available here for purchase.
First problem:
We can't restore the backup (45gig of which 30 gigs are pictures) because the iPad mini has too little space. No problem (or so I thought), let's just delete his photos after I manually backed them up. It turns out we cant delete the photos on his iPad (syncing doesnt work, nor can we manually remove them) because iTunes (he is running 10.6.8 and cannot upgrade further) doesn't provide the function of deleting things, and like I just said the syncing doesn't work. This after trying EVERY solution and workaround presented in the forums.
Second Problem:
This would all have been easily solved if we could just do a memory upgrade on the mini. But Apple has seen fit to force their clients to go out and buy BRAND NEW iPad's if they want a small ram upgrade.
Third problem:
I tried the syncing seperately via iPhoto and guess what? After about 4 hours of waiting around for it to syncronize it did Jack Diddly Squat.
Can anyone that maybe has had the same problem provide a solution?
For those PR agents out there who actually care, just make things simple. People WANT simple. I'm done with punting your low quality products though.you can import ALL those photos into iphoto. Then EXPORT them to a large capacity hard drive. Then sort through the photos and sync em to the other ipad.
When you export movies then make sure you choose ORIGINAL not JPEG. -
Intelligent Agent Won't Run - Please Help!
Hello,
I have been able to install Oracle 8.0.5 on both Redhat 5.3 and
Suse 6.1. Most everything seems to work correctly. I can connect
to the databases from client software.
But I can't get the Intelligent Agent to run in either case.
When I check on it's status after attempting to start it I get
the message "The DBSubAgent is not started".
What does this mean? What do I need to do in order to get the
Intelligent Agent to run?
nullSteve Bowen (guest) wrote:
: Hello,
: I have been able to install Oracle 8.0.5 on both Redhat 5.3 and
: Suse 6.1. Most everything seems to work correctly. I can
connect
: to the databases from client software.
: But I can't get the Intelligent Agent to run in either case.
: When I check on it's status after attempting to start it I get
: the message "The DBSubAgent is not started".
: What does this mean? What do I need to do in order to get the
: Intelligent Agent to run?
You must reinstall this package : tcl-8.0.2-16.i386.rpm.
Regards
null
Maybe you are looking for
-
Premiere Pro - Insufficient Media error message for transitions
Keep getting Insufficient Media error message for transitions with premiere pro, can you help please?
-
Goes back to main menu when watching tv episodes
I recently downloaded the new ios4 software. Everthing is great except when i try to watch a tv episode it randomly takes me back to the main menu. Also if i try scrubbing forward it takes me back to the menu, does anyone know how to fix that?
-
Standard Compnent for Order Item Selection as Usage in own Component
Hi all, is there any standard component that I can use to select items form orders or quotations? I can't use BTFOLLOWUP since this component updates the BOL by themselve - see component usage in BT115H_SLSO. I need something like this -> BTAdminH as
-
Hi...Experts, we are going to handle JDBC-RFC Synchronous scenario, how can we proceed, what are the settings are to be required and if u have any example sceanrios pls share with me, it would be very helpfull for me.. thanks in advance, Jain
-
Forums here are hard to find NO LINK on your website to Forums?
Hello, I was looking to purchase software and was surprised you did not have a support forum as most do. I almost gave up then did a google search and found your old forums, then clicked on a link that said your forums have moved. So here I am but fi