Intellimouse Issue

Thanks in advance to anyone who can offer any advice. Here is my issue:
I've been using a Microsoft Intellimouse (Microsoft 5-Button Mouse with IntelliEye, ver. 3.0) for over a year now and never had any issues with it. Since upgrading to Leopard, I have problems dragging and dropping items on my desktop.
Basically I can highlight a file and drag it, but when I go to drop it, it remains 'stuck' to the mouse pointer. I can't click on anything else once this happens, and the only way I've been able to stop the problem is to unplug the mouse from the USB port. Plugging the mouse back in either 'unsticks' the selected file or causes a gray warning screen to appear telling me to restart my Mac immediately.
I've tried it my mouse on different USB ports - all have the same issue. I upgraded the mouse's driver (to 6.2.2) and still have the same issue. Also zapped my PRAM and repaired permissions - none of which helped. I've switched back to the mouse my Mac came with, and while mouse has no problems, it is VERY difficult to control.
Any suggestions/advice would be greatly appreciated.

This relates to the way OS X handles mouse acceleration - the shorter a distance you move the mouse, the slower the pointer moves. It certainly threw me at first
You can download an app called SteerMouse which lets you configure more options than the OS X preferences, including the acceleration behaviour. Some Microsoft mouse drivers also give options to change the pointer behaviour - try those if you have an Intellimouse.

Similar Messages

  • Issues fixed in FM 7.1 release

    Adobe FrameMaker 7.1 for English, French and German was released on January 10, 2004. The following is a list of issues fixed in this release.
    250374
    FDK: FA_Note_PreSetAttrValue notification not sent for new elements. If a client subscribes to FA_Note_PreSetAttrValue events, it will get a notification when one changes an attribute by double clicking it in the Structure view. However, on creation of a new element through the element catalog, if an attribute is set, no notification is sent.
    This issue has been resolved.
    277554
    FDK: F_ApiUnStraddleCells() does not work as expected.
    When unstraddling cells through the API, all the cells except the leading cell have no paragraph end marks (they are completely empty). Clicking into such cells takes the text cursor to the location of the table anchor. Inserting a character into the paragraph with the table anchor seems to correct the table.
    This issue has been resolved.
    310049
    FDK: F_ApiImport shows a dialog upon import of SGML entities.
    When importing an SGML fragment by reference using F_ApiImport, FrameMaker displays a dialog asking whether the text inset should be updated automatic or manually. This setting should be controlled from import-parameters.
    Currently there is no way of creating a client that imports a large number of SGML text-insets without having a user sitting by the keyboard and clicking OK for each imported entity.
    This issue has been resolved.
    314764
    FDK: F_ApiDelete does not work properly on elements inside a TextInset. When you try to delete an element that is part of a TextInset, the whole TextInset is removed.
    The work around for this is to unlock the text before calling F_ApiDelete and to lock the text after this call. The calls to unlock and lock the text are given below:
    To unlock - F_ApiSetInt(docId, insetId, FP_TiLocked, False);
    To lock - F_ApiSetInt(docId, insetId, FP_TiLocked, True);
    387821
    Microsoft Intellimouse Scroll wheel locks up FrameMaker when it's pressed or scrolled.
    This issue has been resolved.
    408675
    Rotated PDF files do not appear on 24-bit or 32-bit displays.
    This issue has been resolved.
    463533
    Non-unique ID tags cause inconsistent hypertext links due to multiple entries in the HTML export. If there are conflicting IDs in different documents of a book, non-unique ID tags are generated which cause this behavior.
    This issue has been resolved.
    507486
    If you edit the MAKER.INI file by adding the line SplashScreen=Off, in the [Preferences] section, then the Help->About command crashes FrameMaker with Internal Error: 7004, 6048898, 7639747, 0
    This issue has been resolved.
    529757
    (don't include) Marker element gets included and merged in PDF bookmarks with previous heading. In FrameMaker 6.0, the document prints to PDF as expected--the bookmarks in Acrobat PDF contain the Section2/Heading as expected, such as:
    Spark Plug Threads
    and Lamp Base and Electrical Fixture Threads
    In FrameMaker 7.0, the document prints to PDF with the Section2/Heading merged with the Run.head marker element, even though Run.head is in the ''Don't include'' list of elements in the PDF Setup dialog box.
    This issue has been resolved.
    534856
    The value of DPDFOpenBookmarkLevel is ignored when read in a MIF file.
    This issue has been resolved.
    534865
    The values Default, All, and None of the ''Bookmarks expanded through level'' field (in Format > Document >PDF setup) are not retained when a FrameMaker document is saved and opened again.
    This issue has been resolved.
    535630
    Windows Metafile (wmf) graphic (created from Microsoft VISIO 2002) causes "an error occurred while printing" but partially prints.
    This issue has been resolved.
    537955
    ISOdraw CGM graphics and tables on the same page cause CGM stroke lines to be printed in White.
    This issue has been resolved.
    540408
    Inconsistent dialog behavior between FrameMaker 6.0 and FrameMaker 7.0 when opening filename.sgm. Unlike FrameMaker 6.0, FrameMaker 7.0 displays the Unknown Filetype dialog.
    This issue has been resolved.
    540417
    Inconsistent dialog behavior between opening filename.sgm and filename.sgml.
    This issue has been resolved.
    541912
    TaggedPDF:fmpdfreflow plug-in - display of PDF file not good for shaded table cells. When table cells have shading in them, the PDF file does not show all the content of the shaded cells. This happens on Windows only.
    This issue has been resolved.
    565678
    PDF generation on UNIX translates CMYK colors to RGB.
    This issue has been resolved.
    567784
    FP_InsetFile has a value of "BadFileName" when SGML importing misses a graphic data file. If you import an SGML file that would read external graphic files and these data files are missing, then skipping or ignoring them results in "BadFileName" pathname for each object property. This makes FDK API Client not get FP_InsetFile property value for the FO_Inset object.
    This issue has been resolved.
    569092
    FrameMaker7 server can't find default printer when launched as a service.
    This issue has been resolved. To suppress the errors during initialization e.g.. No Default printer, invoke FrameMaker with the -silent option.
    569969
    When the Paragraph Designer is open, you can't switch to open documents using the book window.
    This issue has been resolved.
    581376
    FrameMaker works very slowly or returns an internal error. When processing a document that includes many EPS image files, FrameMaker creates many FRMxxxx.tmp files in the C:\Documents and Settings\Account Name\Local Settings\temp\ folder. The xxxx is a hexadecimal number. Even after quitting FrameMaker, the FRMxxxx.tmp files are NOT deleted, and the same document creates different FRMxxxx.tmp files after being opened again. The template files pile up in the hard disk for the Account/user, until the xxxx reaches ffff, the maximum number for the 4 digits of a hexadecimal number. At or near this time, FrameMaker works very slowly or stops with internal error:7004,6643018,6765315,6712018.
    This issue has been resolved.
    581522
    Imported PDF document with transparencies does not print correctly.
    This issue has been resolved.
    584633
    Internal Error: 7004, 6055410, 7657059, 0 when saving/printing to PDF includes Bookmarks that include index elements. The crash occurs only on Windows. The problem occurs when you attempt File > Print to PDF, when you want to Generate PDF Bookmarks based on structure elements, and have the ''Sectlevel1'' element in the ''Include Elements'' pane, and that particular ''Sectlevel1'' element plus the length of the text in the index marker entries exceeds 256 characters.
    This issue has been resolved.
    589859
    Post installation of Distiller 6.0, .tps file gets retained along with PDF and log file.
    This issue has been resolved.
    592974
    Opening a large XML file in FrameMaker generates error 'Internal Error 7004, 6052770, 0....
    When an XML file contained more than 65520(FFF0) children elements, FrameMaker crashed.
    This issue has been resolved.
    595875
    Spell check skips elements, loops around elements, or gets completely stuck.
    This issue has been resolved.
    597276
    The Save as PDF command does not create a PDF file (for certain files) when Generate Tagged PDF is ON
    This issue has been resolved.
    598056
    Group4 fax encoded TIFF files imported in FrameMaker 7.0 don't display nor print--does not occur in previous versions.
    This issue has been resolved.
    600053
    Display/Scrolling performance is very slow with documents having TIFF images imported by copy.
    This issue has been resolved.
    600497
    Scrolling a document in FrameMaker using Page Up/Down button goes to previous/next page respectively. Scrolling a document using Page Up and Page Down button goes to the previous and next page respectively. User would expect to scroll to the previous/next screen instead of going to previous/next page using these buttons, as seen in other Windows applications like MS Word, etc.
    This issue has been resolved.
    601470
    Links being dropped in SVG filter. Import an SVG file by reference (and the imported file has a link to another SVG file). Save this and reopen; the referenced SVG file is missing.
    This issue has been resolved.
    603668
    The text in the markers gets included in the PDF Bookmarks. Do not include textual content of marker elements, such as Index markers. This is because if you do, the Acrobat bookmarks can appear created if the element has:
    where Indexterm contains the marker text:
    <$startrange>PDF Creation;<$endrange>PDF:Good;How To:Create Good PDF
    ... You will end up with an Acrobat Bookmark containing:
    How To Create <$startrange>PDF Creation;<$endrange>PDF:Good;How To:Create Good PDFGood PDF ... which is not desirable.
    This issue has been resolved.
    606704
    In Server Setup dialog box, user name of the form "domain\username" does not allow names starting with b, r, etc. While trying to get FrameMaker to talk to the WebDAV server, which is using Windows authentication, when we specify a user name of the form "domain\username" in the "Server Setup" dialog box (File | Workgroup | Workgroup Servers ...). For some user names this works; for others it doesn't.
    This issue has been resolved.
    607610
    Framemaker crashes when Print is selected twice from the context menu for a book.
    This issue has been resolved.
    610099
    Drop Caps are not imported as TextFrames (RTFImport).
    This issue has been resolved.
    610600
    Words on which cross references are created are getting dropped while importing doc file (Word2000Import). Create a cross reference on some word in MS Word, and import the doc file into FrameMaker. The word on which the cross reference is created is getting dropped.
    This issue has been resolved.
    611165
    Words on which cross references are created are getting dropped while importing rtf file (RTFImport). Create a cross reference on some word in MS Word, and import the rtf file into FrameMaker. The word on which the cross reference is created is getting dropped.
    This issue has been resolved.
    611802
    Text which is rotated is lost when exporting to RTF.
    This issue has been resolved.
    611900
    FrameMaker locks referenced files until the application closes.
    This issue has been resolved.
    613546
    The filter name in the unknown file type for import is Microsoft RTF whereas for Export it is Microsoft RTF 1.6.
    This issue has been resolved.
    616153
    Contents of anchored frames not visible after save as PDF with Tags. After saving a document with anchored frames as PDF with Tags enabled, the contents of the frame are not visible in the PDF generated.
    This issue has been resolved.
    624470
    footnote element mapping to Frame Footnote is commented in Rules defined for XDocBook. In application definition of XDocBook in $FMHOME/structure/xml/xdocbook/app, footnote element mapping is to FM Footnote element. However, this rule is commented since past few releases. As a result, any (xdocbook) XML document with footnote is shown as invalid in FrameMaker.
    This issue has been resolved.
    624472
    Revision remark (revremark) element is mapped to different element names in EDD and rules. Rules for XDocBook in $FMHOME/structure/xml/xdocbook/app translate revremark to RevRemark. However, EDD (ECM) defines Revremark as mapping for revremark element. Hence a valid xdocbook XML document with revremark is shown as invalid (with unknown RevRemark element) in FrameMaker.
    This issue has been resolved.
    624517
    Unable to open FrameMaker 7.0-created fm file, which is created by importing a Word document.
    This issue has been resolved.
    625306
    Office documents don't open in FrameMaker in absence of write permissions (UNIX).
    This issue has been resolved.
    626431
    For line spacing, values that are beyond range are not mapped correctly (RTFExport). For line spacing in frame document which are beyond the max or min range of RTF, the mapping is not correct and same value of line space I mapped to three different values in RTF.
    This issue has been resolved.
    626434
    For stretch, values that are more than 600 are not mapped correctly in RTF (RTFExport). For stretching in frame doc that are beyond max value in RTF (600), the mapping is not correct. There is no stretching (scaling in RTF) in effect in exported RTF for values greater than 600 specified in frame.
    This issue has been resolved.
    626450
    Current date and time are not getting exported properly and are coming as 0's and XXX (RTFExport).
    This issue has been resolved.
    627855
    After saving as PDF, headings are centered in reflow mode. After a particular file is saved as a PDF file and is viewed in reflow mode in Acrobat, the headings are centered.
    This issue has been resolved.
    631967
    Installer does not recognize existing installation.
    This issue has been resolved.
    633133
    Right indents are not mapped while importing Excel
    This issue has been resolved.
    633137
    Data in the Custom formatted cell is lost while importing excel sheet.
    This issue has been resolved.
    633462
    FrameMaker terminates while exporting to RTF.
    This issue has been resolved.
    633710
    You have to give a filename with extension, while saving a file to RTF.
    This issue has been resolved.
    638750
    A PS file generated from FrameMaker with Tagged PDF on and hypertext marker in the file, cannot be distilled to PDF
    This issue has been resolved.
    638824
    Dialog Box indicating Unsaved changes made to file is not displayed on closing a document after importing an image using drag and drop.
    This issue has been resolved.
    639220
    If you select a Master Page or a Reference Page and select Save as PDF, PDF generation fails without giving appropriate error message.
    This issue has been resolved.
    641918
    When converting a FrameMaker book to PDF: default opening page in PS/PDF may be incorrectly set to be the first page of last chapter in a book.
    This issue has been resolved.
    642765
    On drag and drop of a SVG file into FrameMaker, if you click on the cancel button on the Import SVG dialog, the cancel is ignored and the file is imported.
    This issue has been resolved.
    643092
    If United Kingdom is chosen as the country of purchase, the EULA contains the string "FrameMakerDesktop _USEnglish_1.21.02_17:29".
    This issue has been resolved.
    644158
    Following alerts can not be suppressed via command line option:
    . Register now/later/never
    . Adobe Online
    These can be now suppressed using the -noaol command line option or by using the DisableAdobeOnline=On option in the maker.ini file.
    644904
    An empty merged cell(256 columns) created in Excel imports as a blank file.
    This issue has been resolved.
    645230
    If you import a Word document having large number of footnotes in FrameMaker, the footnotes are overlapped.
    This issue has been resolved.
    645538
    Cross reference text when exported to RTF has an additional space after the cross reference text.
    This issue has been resolved.
    645863
    When an excel file containing cells applied with custom formatting is imported in FrameMaker, the font and color of these cells is different in FrameMaker.
    This issue has been resolved.
    646609
    When a specific excel file is being imported the data in the first cell is lost.
    This issue has been resolved.
    646676
    When saving a MIF file, then opening it in FrameMaker, the DPDFZoom settings are lost.
    This issue has been resolved.
    647770
    User defined variables with _ in their name when saved to xml and opened again in Frame, round-trip as fmv1, fmv2 ...
    This issue has been resolved.
    648043
    When you try to open/import a file with a name containing more than two % signs and at least 1 non-% character between the second and third % sign then FM gives an error saying the file is non-existent
    This issue has been resolved.
    648114
    Info>Copyright>More crashes FrameMaker
    This issue has been resolved.
    648434
    When you import an RTF file with a cropped image in FrameMaker, it is imported in its original uncropped form.
    This issue has been resolved.
    649640
    When a word document having text with decimal numbering is imported, the sub points (1.1,1.2,...) are imported as (0.1,0.2,..)
    This issue has been resolved.
    650631
    When you import a word document having numbering points with comment on each numbered point, the font size of the numbering point is reduced.
    This issue has been resolved.
    650962
    FrameMaker crashes on scaling any anchored frame on reference pages.
    This issue has been resolved.
    652229
    When you import a word file with ascending raised/lowered baselines then they are not imported correctly.
    This issue has been resolved.
    652433
    When you import an excel file containing date formatting having mm format, FrameMaker inserts an extra zero before the date.
    This issue has been resolved.
    652752
    If you install FrameMaker from network, the short cut to readme file opens it in notepad.
    This issue has been resolved.
    652794
    The alert Inconsistent settings in Book" during F_ApiSilentPrintDoc() can not be suppressed.
    This issue has been resolved.
    654309
    When you import a word document having numbering (1.1,1.2,..) placed after some non-decimal numbering(1,2,3), FrameMaker imports it as (3.1, 3.2,..).
    This issue has been resolved.
    654348
    When you save an inline image as .doc in Acrobat6 and import this word file in FrameMaker, FrameMaker enlarges the graphics on import.
    This issue has been resolved.
    655072
    When you have an user defined variable in the frame document as well as the template, you save this document as XML and open the XML file again in frame, the template definition overrides that of the document.
    This issue has been resolved.
    655726
    Full license number is displayed in the Help>About FrameMaker 7.0 screen.
    This issue has been resolved.
    656171
    Full license number is displayed in the FrameMaker 7.0 Splash screen.
    This issue has been resolved.
    656820
    If you zoom or move frames after importing a graphic in FrameMaker, Framemaker logs out the user from Unix machine.
    This issue has been resolved.
    657053
    If a frame document displays images from the reference page and you simultaneously open multiple such documents, then the images from the document opened first can replace the images in the other documents
    This issue has been resolved.
    658744
    If you open an XML file locked by some other application, FrameMaker shows a Validation Error dialog box. For this to work, the XML locking feature should not be switched off.
    This issue has been resolved.
    658749
    The German version of Online manual xmlcss.pdf has comments in it.
    This issue has been resolved.
    Known Issues
    The printed user guide, on-line help and QRCs will not change between the FrameMaker 7.0 release and FrameMaker 7.1. Certain online manuals will be updated, and a new online supplement will be added to cover user documentation of the new release.
    [Original message from Forrest_F accidentally deleted when Forum re-organized]

    Read this SAP Note - Note 1487853 - SAP NetWeaver MDM 7.1 SP07 Release
    or refer the link
    http://help.sap.com/saphelp_mdm71/helpdata/en/4d/885f32b97d14aee10000000a42189c/content.htm
    Similaryly read for SP06 fixes at - http://help.sap.com/saphelp_mdm71/helpdata/en/be/e0048b426b4c20957078b61ec71e46/content.htm
    These links gives you an idea of what all changes are going to come into your new system. So unless you upgrade to SP07 i.e. the latest version and test it in DEV/Sandbox environment you should not plan to move ahead in Production. This is always recommended but there is very less chance that the already working solution will not work as expected after the upgrade.
    Thanks,
    Shambhu.

  • ISub:  Noise from wireless Microsoft Intellimouse..

    Hi,
    I have the iMac G4 USB 2.0 20-inch model, w/Apple Pro speakers. Yesterday, I received an iSub I ordered on eBay.
    The iSub worked great, except when I was "doodling" with the cursor a crackling noise would come through the iSub. The noise went away when I uninstalled the Intellimouse drivers, disconnected the Intellimouse, and connected the beautiful but limited Apple one-button mouse that came with the computer.
    Am I doomed to using the Apple mouse to avoid this issue? Anyone here with similar problems with iSub, iMac, and Intellimouse?
    Thanks.
    Bucky
    iMac G4 20-inch flat panel   Mac OS X (10.4.8)   MBP 15" 2.0gHz. Wife's 15" PB 1.67gHz. Wife's 5G 30GB iPod. 5G 60GB iPod.

    Found the problem.
    The USB connection at the USB extension cable wasn't seated. Pushed it in, taped it up, and I'm good to go.
    As we used to say in radio operations: Operator error - short between the headsets.
    Listening to ZZ Top's cover of Viva Las Vegas...Wow!

  • Kernal panic issue help

    ive been getting the must restart screen usually coming out of sleep and after restarting sometimes ill have to do it 3-4 times ive done my homework , still happens after unpluging all pereferals ,ive reset PRAM ive reset pow mang unit, ran disk utillities not only archive but did full erase and install and after e&i was not having prob. slowly added pereferals over a few days like lexmark z23, seagate hard drive (for backup only) a microsoft intellimouse expl 2 wireless mouse thinking that when must restart problem occurs, at the report to apple sceen afterward the dates within it would help find specific issue but none of the dates within. ive done all applesite has suggested. my printer and mouse software says its for macosx can anyone give me some feedback or sugestions
    what can it be and can anyone make sense of the error report after problem restart if i were to post it? thanks a million

    HI, ken.
    See my "Resolving Kernel Panics" FAQ. This FAQ includes step-by-step instructions for identifying and resolving some of the most common causes of kernel panics.
    My FAQ is a roadmap: start at the beginning and work through to the end, following the instruction in the order specified, including the "If all else fails..." section if a cause or resolution is not found in an earlier troubleshooting step therein. While you may have done some of the things cited in the FAQ, the order in which they are done can be critically important, hence the roadmap.
    If you post the panic log, I will endeavor to see what it can tell us. Instructions on posting the panic log are also found in my FAQ.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X
    Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • Microsoft wireless mobile mouse 4000 issue

    My wife has a 4-year old MacBook Pro running 10.6 (can't get her to change...).  We recently had to replace her MS Wireless Mobile Mouse 4000--we've both used these for years.  We're having an issue with hers...the left button won't go "back" in Safari (or any other program for that matter) and I've tried everything, including assigning the proper keystroke to the button, etc.  When I look at her Microsoft Mouse preference panel, it does not show the correct mouse, having an extra button.  I've downloaded the latest version of their intellimouse software and it doesn't matter.  When I try to get mouse info from the preference panel it tells me it can't see a mouse connected.  Anyone got any ideas?
    Thanks in advance.
    Rocketman

    " When I try to get mouse info from the preference panel it tells me it can't see a mouse connected.  "
    Did you replace the USB receiver as well? The receiver needs to be paired with the new mouse.

  • Is this some sort of ATA/IDE Issue??

    To get it out of the way here's my entire setup (just in case):
    Athlon64 3200+
    K8N Neo2 Platinum
    2x512 Kingston HyperX
    Maxtor 6L040J2 (system drive; 40gb NTFS ATA-133)
    Maxtor 5T040H4 (storage drive; 40gb NTFS ATA-100)
    [brand new] Antec TruePower 480w
    Radeon 9500 Pro 128mb
    [brand new] Artec DVD-ROM drive
    Netgear MA311 Wireless card
    SoundBlaster Live! 5.1
    3 1/2" Floppy drive
    Plugged into USB: MS Intellimouse Optical, MS Sidewinder Precision Pro, Self-powered
         HP printer
    PS/2 Keyboard
    (sorry, I'm writing a novel here. Below is a quick summary of the problem, a complete account of the issue follows.)
    What the HECK is going on?! It seems like somehow information being transferred from my DVD drive isn't properly making it to the HD, or the CD's aren't properly being read. The drive obviously isn't the problem as I replaced it with a brand new one. All my drivers are completely up-to-date. Other than this I haven't made any HW changes that could account for this. I'm mystified and a bit worried as to what could be the problem. IDE controller failure maybe? At this point I fear the motherboard has, after a month, decided to become defective.
    HELP!!!!!!!!!
    OK so here's the issue: about a month ago I upgrated this system's motherboard, processor and RAM. I had some annoying issues with getting windows to recognize the DVD-ROM drive during installation but a fresh install took care of those and it's worked perfectly ever since.
    But earlier this week, suddenly my DVD drive stopped working on me AND when I plugged my iPod into the firewire port to charge it and tried to start the computer it would POST but Windows locked in the kernel loading screen and wouldn't successfully boot.
    So, thinking it a power supply issue, I replaced both the power supply (formerly a 330W Enermax) and the DVD drive.
    I switched both components out and today I have the exact same issue with the DVD drive.  My thinking is now that the problem is with Windows, not the hardware...maybe even a virus. I fiddle with Windows unsuccessfully and even try a repair installation. That falls through when partway through the install process setup suddenly refuses to copy files from the CD to the HD, even though it finds them right on the CD! (talk about annoying). Windows gives no reason, it just says it can't copy the files and tells me to check the location.
    At that point I say "screw it," format one of my drives with unimportant info on it, and do a clean XP install. Everything goes fine and I get on the internet, install SP2, the latest mobo drivers, video drivers, etc etc etc.
    BUT...when I begin installing things from the CD, namely Office2000 and Battlefield Vietnam, Windows begins to tell me either that it can't find files on the CD again (office2K) or that files being copied are failing CRC checks and that I should check the installation media (BFVN)

    Quote
    Originally posted by xmlviking
    My action is all jacked up now.
    I can burn to the CD-ROM but I can't get it off the dang drive.  
    I can see the icons files etc...
    Weird.  I even tried disabling off the IMAPI service.....
    I'm using the MS drivers as well :(
    Wierd....really wierd.
    I was reading my manual again and it said something about disableing IDE Prefetch if you have after market interfaces ....I'm assuming some other PCI card or unique drivers....
    Should I have that Disabled?  
    Thanks,...
    This sort of rings a bell with me as I just finished my new system (as described in my sig) and used a WD 120gb IDE from the older system, but in the older system I had been running it in a master-slave configured channel and *I'd forgotten* that the WD drives have a unique "single-drive" jumper config that is *different* from the standard "master" jumper config when used in a pair of drives on one IDE channel.  So...I installed the drive with the jumper set to "master" even though it was stand-alone on IDE 0, and as a result experienced a very slow boot--when it would boot at all, that is--and data corruption exactly as you describe.  I went right to the jumpers, though, because while the symptoms are typical of a couple of things,  among them is *the wrong jumper settings* for the drives.  (Heh, once long ago in a similar experience it took me entirely too long to realize that things weren't working out because for the whole time I had been reading the jumper schematic *upside down* without realizing it--I felt pretty foolish after that (but it taught a good lesson)...  So check those jumpers ...
    The only other causes I have ever seen that mimic the symptoms you're getting are these:
    (1) Careless overclocking of something in the system
    (2)  Bad ram
    (3) A bad hard drive
    One other thing I noticed when setting up my K8N2P a couple of days ago was that initially I could not boot into the Windows desktop, but could only boot after a blue-screen lock into a safe mode GUI.  It was pretty annoying for a couple of hours until I discovered something about the 1.3 bios settings relative to the K8N2's IDE bus configuration.  In every other system I've seen, if both the PIO and the UDMA bios settings are set to "auto" then as long as you have the right cable in play the bios will correctly negotiate the drives' operational mode and will set it automatically so that even if you have *no drive* connected as an IDE slave, for instance, but have the secondary PIO and UDMA selectors at "auto" booting should not be a problem.
    But in this one case--that was the problem as it turns out.  I had no drive as slave on IDE zero--only my boot drive set to stand-alone "master"--but until I set the UDMA mode in the bios tp "disabled" for the slave on IDE 0 the system simply refused to boot into Windows!  Also, as well, as my two CD drives are PIO 4 I also had to set *them* in the bios to "auto" for  for PIO but *disabled* for UDMA.  IE, for some reason the system simply wasn't auto-configuring the IDE *UDMA* channels properly.  Since I *manually* adjusted the bios UDMA settings to their proper state for these devices I've been booting into WindowsXP SP2 ever since without a single reoccurance of the problem.
    Only thing that comes to mind is *cabling and jumpers*--I'm now wondering if the bios is looking for cable select instead of the traditional config.  I'll probably look at that tomorrw--it's late and gotta' go!....

  • Windows 7 Sleep issues--freezes after coming out of sleep

    Running Windows 7 rig with MSI MS-7511 Mobo. Back in October, I purchased a refurb Microsoft Wireless 6000 keyboard and installed it. I THINK this is what started my problems. Since then, computer will go into sleep mode as usual, but at some point after coming out of sleep (maybe a few seconds, maybe an hour) it will totally freeze. The only way to get the system back up is to unplug it and re-start.
    I have since uninstalled the keyboard, and tried to restore, but still having the problem. Pretty sure it's a USB problem, but I have tried re-installing drivers (mcp732) and even the MB BIOS. If I run the system without my wireless mouse and with no USB devices, it works fine. I have also tried switching USB devices to different ports, to no avail.
    It's not just the mouse that causes the issues, it seems to be any connected USB device.
    Also--and I think this is weird-I installed a PCI USB card in one of the slots and transferred my mouse to that and the same thing still happens. Wouldn't that be a totally different set of drivers than the ones that drive the main MB USB devices?
    Don't know what to try next . . . want to avoid having to do a Windows re-install if possible.
    Below are the errors I get when I run powercfg -ENERGY.
    Any ideas? Would like to avoid giving away another two days of my life re-installing my software.
    USB Suspend:USB Device not Entering Suspend
    The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
    Device Name   USB Root Hub
    Host Controller ID   PCI\VEN_10DE&DEV_077E
    Host Controller Location   PCI bus 0, device 4, function 1
    Device ID   USB\VID_10DE&PID_077E
    Port Path   
    USB Suspend:USB Device not Entering Suspend
    The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
    Device Name   USB Root Hub
    Host Controller ID   PCI\VEN_10DE&DEV_077B
    Host Controller Location   PCI bus 0, device 2, function 0
    Device ID   USB\VID_10DE&PID_077B
    Port Path   
    USB Suspend:USB Device not Entering Suspend
    The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
    Device Name   Microsoft Hardware USB Wireless Mouse
    Host Controller ID   PCI\VEN_10DE&DEV_077B
    Host Controller Location   PCI bus 0, device 2, function 0
    Device ID   USB\VID_045E&PID_00E1
    Port Path   5
    USB Suspend:USB Device not Entering Suspend
    The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
    Device Name   USB Mass Storage Device
    Host Controller ID   PCI\VEN_10DE&DEV_077E
    Host Controller Location   PCI bus 0, device 4, function 1
    Device ID   USB\VID_0781&PID_5406
    Port Path   3

    Quote from: itsallpoo on 04-March-11, 07:46:27
    I don't think I've had a setup yet where sleepmode wasn't causing issues, I shut it off.
    Sleep has only become an issue with Windows 7, where MS got so aggressive about it, and caused so many problems for so many people, that many have done as you and turned it off! Shame on you Microsoft! Instead of saving energy your customers are leaving their PCs on!
    I suspect the OP's problem is with (of all things) the MS wireless mouse/kb driver(s). At first my setup wouldn't work at all, then I dl'ed the newest Intellimouse drivers/software and it worked "better", but I have never been able to get Sleep to work reliably. I finally found that Hibernate works reliably, so that is all I do now. When the PC is done working, it saves to HDD and shuts off. Resuming from this state takes longer than resuming from Sleep, but at least it Works Every Time.

  • Beta Wacom drivers - 610-6.....issues?

    Hey Everyone.....
    I installed these a few days back (15th) and while they are improved overall I am starting to have system instability....BSOD 0x00000024 / 0x0000001E, warm boots before the login screen, and weird behavior like the NTFS file system not working ( causing corrupt saves ), superfetch shutting down, Photoshop minimizing - maximising then windows shutting down........Odd
    A virus is not out of the question but before I reformat etc I was wondering if the Beta Wacom drivers has caused any issues on other systems. Looking at the reliability records the graph is pointing downward exactly at and after the date I installed the drivers.
    Just troubleshooting....thanks in advance.
    OS Vista Ultimate x64 SP1
    CPU intel q9650 3ghz
    Motherboard Asus p5q deluxe
    Memory 16gb (4x4gb) OCZ PC6400 C5
    Graphics Card Nvidia 8800GTS 640mb
    Sound Card on board
    Monitor(s) Displays Eizo CG301w, Dell 2407
    Screen Resolution 2560 x 1600 + 1920 x1200
    Keyboard apple slim aluminum jobbie
    Mouse intellimouse
    PSU ocz 600w
    Case coolermaster stacker
    Cooling many fans
    Hard Drives Raptor 74gb, Raptor 150gb, 500gb x2, 320gb.
    Other Info Wacom A3 tablet, Epson 3800

    I got an Intuos 3 for Hannukah, to replace my Intuos 2. When I set it up I also installed the 610-6 driver, and all hell broke loose when using Photoshop: straight lines only, no pressure sensitivity, even more lag than the already terrible lag in PS CS4.
    But I had installed it on top of my previous drivers (as Wacom recommends), which was 610-3 or something. So I totally uninstalled all Wacom drivers, then reinstalled 610-6, and now (so far) everything is smooth as silk.
    Using Win XP SP3

  • Middle Mouse Button Issue

    I have an Intellimouse Optical 5 button mouse and I've installed the Microsoft Driver to control the side buttons and the side left right buttons. The issue I am having is with the middle mouse button. I've set it to "Scroll" in the software and when I click it, nothing happens. I like the setting where if I use the middle mouse button on a link, it opens a new tab and when on a blank space in Safari, I can scroll up and down quickly. I've looked at all of the options. Any suggestions?

    No answers. I just use it to open new tabs, but still have not found a way to fast scroll.

  • Quicksilver OS 9 Issues

    This is a project I've been fooling around with lately.
    I dug my formerly-prized Quicksilver G4 out of storage intending to use it as an Airport network host to take the duty away from my G5.
    Anyhow, previously in life it had been running 10.4.9 with OS 9 and Classic installed on separate partitions (two drives, two partitions each).
    I wiped the remaining drive (one was migrated to the G5) into one partition and installed a new copy of Leopard. Since then I'm unable to get a copy of OS 9 on this machine. The only install disc I have is the retail copy of 9.1 I bought years ago and it gives me unimplemented trap errors upon booting from that CD.
    So my questions are this- is there any reasonable manner to get a copy of 9.2.2 on this machine in a bootable fashion? I'm not adversed to adding a second ATA drive if need be for the OS 9 partition. I just would like to avoid something along the lines of- Reformat, install 10.4, install OS 9, install 10.5.
    My second question is- What was the best 3D card when OS 9 drivers were dropped (GeForce or ATI). I've currently got a Radeon 9600 XT in there, but I know there's no OS 9 drivers to be had for it.
    This would be a moot point if I didn't still have a soft spot for old games like Deus Ex.
    Thanks for any help guys.

    That's the detail I missed. It's been a while since I set up an OS 9 drive I forgot about the limit. My hard drives in the pre-10 days never exceeded 100 GB so it never really came up.
    Anyhow, I've got it running a reliable dual-boot with 10.5 and 9.2.2.
    I dropped an older Radeon 9200 PCI in the machine since ATI seems to insist it will work with 9.2.2. While it does 'work' in that it shows video, the ATI Graphics Accelerator extension fails to load, as I expected. I know I've still got a Radeon 7000 PCI laying around somewhere to try out.
    A couple nagging problems I'm still trying to pin down-
    I had a random 'external cache error' in the POST diagnostic screen. The startup before it played a series of beeps and the power LED flashed a few times. I turned it off, hit the CUDA switch, disconnected the power, pressed the power button to flush the power supply, reconnected, and it restarted without an issue.
    It showed an error on the 1st RAM slot, so I removed the 256MB DIMM installed there and zapped the PRAM three times. It passed POST after this.
    The USB seems to randomly cut out. I have the G4's Pro Keyboard and a Microsoft Intellimouse on this machine. The mouse and keyboard will stop responding and switching USB ports doesn't make a difference. I haven't had it out and out die while running 10.5, however. The mouse will sometimes stop responding but I suspect that's more due to it being 6 years old and very well used.
    I'm beginning to wonder if these symptoms with the USB and RAM slot errors are pointing to a bad motherboard.
    Further thoughts are always welcome.

  • New DVR Issues (First Run, Channel Switching, etc.)

    I've spent the last 30 minutes trying to find answers through the search with no luck, so sorry if I missed something.
    I recently switched to FIOS from RCN cable in New York.  I've gone through trying to setup my DVR and am running into issues and was hoping for some answers.
    1.  I setup two programs to record at 8PM, I was watching another channel at the time and only half paying attention.  Around 8:02 I noticed a message had popped up asking if I would like to switch channels to start recording.  I was expecting it to force it to switch like my old DVR, but in this case it didn't switch and I missed the first two minutes of one of the shows.  I typically leave my DVR on all day and just turn off the TV, this dual show handling will cause issues with that if I forget to turn off the DVR.  Is there a setting I can change that will force the DVR to choose one of the recording channels?
    2.  I setup all my recordings for "First Run" because I only want to see the new episodes.  One show I setup was The Daily Show on comedy central, which is shown weeknights at 11pm and repeated 3-4 times throughout the day.  My scheduled recordings is showing all these as planned recordings even though only the 11pm show is really "new".  Most of the shows I've setup are once a week so they aren't a problem, but this seems like it will quickly fill my DVR.  Any fixes?
    Thanks for the help.
    Solved!
    Go to Solution.

    I came from RCN about a year ago.  Fios is different in several ways, not all of them desirable.  Here are several ways to get--and fix--unwanted recordings from a series recording setup.
    Some general principles. 
    Saving changes.  When you originally create a series with options, or if you go back to edit the options for an existing series, You MUST save the Series Options changes.  Pretty much everywhere else in the user interface, when you change an option, the change takes effect immediately--but not in Series Options.  Look at the Series Options window.  Look at the far right side.  There is a vertical "Save" bar, which you must navigate to and click OK on to actually save your changes.  Exiting the Series Options window without having first saved your changes loses all your attempted changes--immediately.
    Default Series Options.  This is accessed  from [Menu]--DVR--Settings--Default Series Options.  This will bring up the series options that will automatically be applied to the creation of a NEW series. The options for every previously created series will not be affected by a subsequent modification of the Default Series Options.  You should set these options to the way you would like them to be for the majority of series recordings that you are likely to create.  Be sure to SAVE your changes.  This is what you will get when you select "Create Series Recording" from the Guide.  When creating a new series recording where you think that you may want options different from the default, select "Create Series with Options" instead.  Series Options can always be changed for any individual series set up later--but not for all series at once.
    Non-series recordings.  With Fios you have no directly available options for these.  With RCN and most other DVRs, you can change the start and end times for individual episodes, including individual episodes that are also in a series.  With Fios, your workarounds are to create a series with options for a single program, then delete the series later;  change the series options if the program is already in a series, then undo the changes you made to the series options later; or schedule recordings of the preceding and/or following shows as needed.
    And now, to the unwanted repeats. 
    First, make sure your series options for the specific series in question--and not just the series default options--include "First Run Only".  If not, fix that and SAVE.  Then check you results by viewing the current options using the Series Manager app under the DVR menu.
    Second, and most annoying, the Guide can have repeat programs on your channel tagged as "New".  It happens.  Set the series option "Air Time" to "Selected Time".  To make this work correctly, you must have set up the original series recording after selecting the program in the Guide at the exact time of a first run showing (11pm, in your case), and not on a repeat entry in the Guide.  Then, even it The Daily Show is tagged as New for repeat showings, these will be ignored. 
    Third, another channel may air reruns of the program in your series recording, and the first showing of a rerun episode on the other channel may be tagged as "New".  These can be ignored in your series if you set the series option "Channel" to "Selected Channel".  Related to this, if there is both an SD and HD channel broadcasting you series program, you will record them both if the series option "Duplicates" is set to "Yes".  However, when the Channel option is set to "Selected Channel", the Duplicates Option is always effectively "No", regardless of what shows up on the options screen.  
    As for you missing two minutes,  I have sereral instances in which two programs start recording at the same time.  To the best of my recollection, whenever the warning message has appeared, ignoring it has not caused a loss of recording time.  You might have an older software version.  Newest is v.1.8.  Look at Menu--Settings--System Info.  Or, I might not have noticed the loss of minutes.  I regularly see up to a minute of previous programming at the start of a recording, or a few missing seconds at the beginning or end of a recording.  There are a lot of possibilities for that, but the DVR clock being incorrect is not one of them.  With RCN, the DVR clocks occasionally drifted off by as much as a minute and a half.

  • Pension issue Mid Month Leaving

    Dear All,
    As per rule sustem should deduct mid month joining/leaving/absences or transfer scenarios, the Pension/PF Basis will be correspondingly prorated. But our system is not doing this. In RT table i have found 3FC Pension Basis for Er c 01/2010                    0.00           6,500.00.
    Employee leaving date is 14.04.2010. system is picking pension amout as 541. Last year it was coming right.
    Please suggest.
    Ashwani

    Dear Jayanti,
    We required prorata basis pension in case of left employees and system is not doing this. This is the issue. As per our PF experts Pension amount should come on prorata basis for left employees in case they left mid of month.System is doing prorata basis last year but from this year it is deducting 541. I am giving two RT cases of different years.
    RT table for year 2010. DOL 26.04.2010
    /111 EPF Basis              01/2010                    0.00           8,750.00 
    /139 VPF Basis              01/2010                    0.00           8,750.00 
    /3F1 Ee PF contribution     01/2010                    0.00           1,050.00 
    /3F3 Er PF contribution     01/2010                    0.00             509.00 
    /3F5 Ee Mon PF contribution 01/2010                    0.00           1,050.00 
    /3F6 Ee Ann PF contribution 01/2010                    0.00          12,600.00 
    /3F9 PF adm chrgs * 1,00,00 01/2010                    0.00              96.25 
    /3FA PF basis for Ee contri 01/2010                    0.00           8,750.00 
    /3FB PF Basis for Er Contri 01/2010                    0.00           8,750.00 
    /3FJ VPF basis for Ee contr 01/2010                    0.00           8,750.00 
    /3FL PF Basis for Er Contri 01/2010                    0.00           6,500.00 
    /3F4 Er Pension contributio 01/2010                    0.00             541.00
    /3FC Pension Basis for Er c 01/2010                    0.00           6,500.00
    /3FB PF Basis for Er Contri 01/2010                    0.00           8,750.00
    /3FC Pension Basis for Er c 01/2010                    0.00           6,500.00
    /3FJ VPF basis for Ee contr 01/2010                    0.00           8,750.00
    /3FL PF Basis for Er Contri 01/2010                    0.00           6,500.00
    /3R3 Metro HRA Basis Amount 01/2010                    0.00           8,750.00
    1BAS Basic Salary           01/2010                    0.00           8,750.00
    RT table for year 2009. DOL 27.10.2009
                                                                                    /111 EPF Basis              07/2009                    0.00           9,016.13
    /139 VPF Basis              07/2009                    0.00           9,016.13
    /3F1 Ee PF contribution     07/2009                    0.00           1,082.00
    /3F3 Er PF contribution     07/2009                    0.00             628.00
    /3F5 Ee Mon PF contribution 07/2009                    0.00           1,082.00
    /3F6 Ee Ann PF contribution 07/2009                    0.00           8,822.00
    /3F9 PF adm chrgs * 1,00,00 07/2009                    0.00              99.18
    /3FA PF basis for Ee contri 07/2009                    0.00           9,016.00
    /3FB PF Basis for Er Contri 07/2009                    0.00           9,016.00
    /3FJ VPF basis for Ee contr 07/2009                    0.00           9,016.00
    /3FL PF Basis for Er Contri 07/2009                    0.00           5,452.00
    /3FB PF Basis for Er Contri 07/2009                    0.00           9,016.00 
    /3FC Pension Basis for Er c 07/2009                    0.00           5,452.00 
    /3FJ VPF basis for Ee contr 07/2009                    0.00           9,016.00 
    /3FL PF Basis for Er Contri 07/2009                    0.00           5,452.00 
    /3R4 Non-metro HRA Basis Am 07/2009                    0.00           9,016.13 
    1BAS Basic Salary           07/2009                    0.00           9,016.13 
    Now please suggest what to do. where is the problem  ? If have also checked EXIT_HINCALC0_002 but nothing written in it.
    With Regards
    Ashwani

  • Open PO Analysis - BW report issue

    Hello Friends
    I constructed a query in BW in order to show Open Purchase Orders. We have custom DSO populated with standard
    datasource 2lis_02_itm (Purcahse Order Item). In this DSO we mapped the field ELIKZ to the infoobject 0COMP_DEL
    (Delivery completed).
    We loaded the data from ECC system for all POs and found the following issue for Stock Transport Purchase orders (DocType = UB).
    We have a PO with 4 line items. For line items 10 and 20, Goods issued, Goods received and both the flags "Delivery
    complete" and "Final delivery" checked. For line items 30 and 40, only delivery indicator note is issued for zero
    quantity and Delivery complete flag is checked (Final delivery flag is not checked) in ECC system. For this PO, the
    delivery completion indicator is not properly updated in the DSO for line items 30 and 40. The data looks like the
    following:
    DOC_NUM     DOC_ITEM       DOCTYPE     COMP_DEL
    650000001       10     UB        X
    650000001       20     UB        X
    650000001       30     UB
    650000001       40     UB      
    When we run the Open PO analysis report on BW side this PO is appearing in the report but the same is closed in ECC
    system.
    Any help is appreciated in this regard.
    Thanks and Regards
    sampath

    Hi Priya and Reddy
       Thanks for your response.
                         Yes the indicator is checked in EKPO table for items 30 and 40 and delta is running regularly for more than 1 year and no issues with other POs. This is happening only for few POs of type Stock Transport (UB).
                        I already checked the changes in ME23N and the Delivery completed indicator was changed and it reflected in EKPO table. Further, i checked the PSA records for this PO and i am getting the records with the Delivery completed flag but when i update from PSA to DSO the delivery completed indicator is not updating properly.
                       In PSA, for item 30 i have the following entries. Record number 42 is capturing the value X for ELIKZ but after that i am getting two more records 43 and 44 with process key 10 and without X for ELIKZ. I think this is causing the problem.
    Record No.    Doc.No.                    Item              Processkey         Rocancel     Elikz
        41               6500000001            30                    11                            X           ---    
        42               6500000001            30                    11                            ---           X
        43               6500000001            30                    10                            X           ---
        44               6500000001            30                    10                            ---         ---
    (Here --- means blank)        
    Thanks and Regards
    sampath

  • HP LaserJet Enterprise 600 M602 driver issue

    Hello,
    I've got issue with 600-series printers. We use the latest UPD drivrer ver. 61.175.1.18849 and print from XenApp 6.5. The error occurs every time when users try to print jpg files from XenApp session. It only happens with 600 series printers and UPD.
    Also I've tried to assign native 600-series driver ver. 6.3.9600.16384 and it works good. But with that driver system says that it's color printer and it brokes our printing reports. These reports are very important for us. So we can't use printer and that driver as well.
    Printer installed on Windows Server 2012 R2. All clients are Windows 7 x64. XenApp Servers are Server 2008R2.
    Is it possible to get fixed UPD driver or correct native driver for Server 2012 R2?
    Regards,
    Anatoly

    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at Printers - LaserJet.
    Click on New Post.
    I hope this helps.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Windows 7 displays error message when exiting +cursor issue

    Two issues here. CS5 Phoshop on Wind 7 64 bit.
    Physical processor count: 8
    Processor speed: 3073 MHz
    Built-in memory: 12279 MB
    Free memory: 9577 MB
    Memory available to Photoshop: 10934 MB
    Memory used by Photoshop: 80 %
    Image tile size: 128K
    First issue is since the latest automatic Adobe update (why fix what isn't broken?) Every time I now exit Photoshop I get the message "Adobe QT Server has stoped working" and occasionally it happens when I exit bridge. Indesign is also behaving badly. I can no longer start a previous document from file manager without ID crashing out.
    The other is the cursors in Clone and erase lose their edge (become invisable) for no reason - well not quite. Noise Ninja crashed Photoshop when I tried to use it. I reinstalled it and all is well. The cursor issue seems to be intermittant but came back (for no reason) after I reinstalled NN. I can't seem to change the cursor, no matter what I do. The problem is now seriously affecting how I work. Almost enough to go back to Win XP which ran CS5 Photoshop flawlessly.
    Any help will be gratefully accepted.
    Doug

    function(){return A.apply(null,[this].concat($A(arguments)))}
    doug87510 wrote:
    The recent problem is the entire outline of the cursor (including the crosshair in the middle) was missing at any size of cursor. All I had was exactly what I'd get if I used a real spraygun.
    Well, that issue is simply a matter of hitting the Caps Lock key.  When Caps Lock is on, you'll see the cursor outline, and when it is off you'll see a crosshair.  That's a feature, not a bug.
    Glad to hear the 11.1 drivers are out.  I will download them and try them now myself.
    Regarding "Adobe QT" crashing...  QT brings to mind QuickTime, though that is Apple, not Adobe.  Do you have Apple QuickTime installed?
    Regarding memory usage, with 12 GB of installed RAM, you should be able to set Photoshop to use 90% or more in Edit - Preferences - Performance.
    -Noel

Maybe you are looking for

  • Install 64 bit version with same license

    I installed the 32 bit version of Lightroom on my 64 bit computer that is running Windows 7 32 bit.  I'm going to upgrade the OS to Windows 7 64 bit...can I install the 64 bit version of lightroom without paying for a new license?

  • Sproxy to file and mail but reciver system one

    Hi All, I have requirements like from proxy (SOURCE system) to mail and File (RECEIVER system) Asynchronous communication in this requirements sender system one and one receiver system here data send to from source system to receiver system data like

  • How does wifi sync work?

    Hi.  From what I have read, iTunes will automatically sync with iOS5 devices if they are plugged in to electricity (and if you have set up your device to sync over wifi, and if iTunes and the device are on the same wifi network).  But when does the a

  • FrontRow bug report

    Hello, I've found a bug on front row I'd like to report. How can I get that sent to Apple? Basically, I've figured out what the problem was with Front Row and my external display. Whenever you connect an external display, Front Row won't recognise it

  • Long texts

    Hi guys i have  a problem. in the sales order item data. there is a field called texts. and in those fields there is a sub field called Item - Production Note. if i write anything over there.will it be pulled to the production order. when i convert t