Intels Dual-Core technology causes Blue-Screen in LabVIEW 7.1 on Windows XP SP2

Dear Ladies and Gentlemen,
last month we've bought a new Notebook with Intel's Dual-Core technology. After installation of LabVIEW 7.1 the system sometimes quit with a blue-screen. The former notebook didn't have this problem.
Is there a fix-pack or service-pack that correct this problem?
Yours
DocDOS aka Timo

DocDOS wrote:
After installation of LabVIEW 7.1 the system sometimes quit with a blue-screen.
Does it blue-screen only when running LabVIEW or does it do that randomly, but it never happened before you installed LabVIEW?
What is the exact message on the blue screen?
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

Schannel errors - appears to be causing blue screens

Hi guys
Every once in a while (a few times a month) our RDS server (server 200r82 hyper-v VM) decides to blue screen and restart.
Each and every time it crashes, we notice hundreds and hundreds of schannel errors appearing just before the crash (event ID 36888)
Well, it did it again this afternoon, and over the last 12 hours we noticed 1008 instances of this error, with 60 odd messages appearing within 0.2 seconds of each other, and 2 minutes before the crash.
I also noticed that just before the crash, there were a handful of services which hung seconds before the logged unexpected shutdown event. These services are as follows.
- UmRDPService
- WPDBusEnum
- UxSMS
- Audio Endpoint Builder
After the crash, it doesnt log any Schannel errors. although, saying this now and just checking again, it looks like its logged 127 instances of the same schannel error, starting from after around 2 hours of bringing the server back online.
Do these Schannel errors cause blue screens/crashes? Or is it something else I should be looking at... I'm at a loss, as there's not a lot more in the way of logs that seem to be telling me what's going on..

Hi EsDood,
Would you please let me know complete message of Event ID
36888? For Event ID 36888, it generally occur if a user tries to access a web site using HTTP but specifies an SSL port in the URL. Please check the Schannel tracing log if find relevant clues.
How to enable Schannel event logging in IIS
Please also refer to following thread and check if can help you.
Schannel
error, Event ID 36888? - IS there a way to Identify what causes Schannel to log error?
In addition, I noticed that a BSOD issue occurred on the Windows Server 2008 R2. Troubleshoot this kind of
kernel crash issue, we need to analyze the crash dump file to narrow down the root cause of the issue. Did you get any dump files? If get, please refer to
KB315263 and check if can help you.
If this issues is a state of emergency for you. Please contact Microsoft Customer Service and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request, please refer to the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

DSC 8.6.1 wrong timestamps for logged data with Intel dual core

Problem Description :
Our LV/DCS 8.6.1 application uses shared variables to log data to Citadel. It is running on many similar computers at many companies just fine, but on one particular Intel Dual Core computer, the data in the Citadel db has strange shifting timestamps. Changing bios to startup using single cpu fixes the problem. Could possibly set only certain NI process(es) to single-cpu instead (but which?). The old DSCEngine.exe in LV/DSC 7 had to be run single-cpu... hadn't these kind of issues been fixed by LV 8.6.1 yet?? What about LV 2009, anybody know?? Or is it a problem in the OS or hardware, below the NI line??
This seems similar to an old issue with time synch server problems for AMD processors (Knowledge Base Document ID 4BFBEIQA):
http://digital.ni.com/public.nsf/allkb/1EFFBED34FFE66C2862573D30073C329
Computer info:
- Dell desktop
- Win XP Pro sp3
- 2 G RAM
- 1.58 GHz Core 2 Duo
- LV/DSC 8.6.1 (Pro dev)
- DAQmx, standard instrument control device drivers, serial i/o
(Nothing else installed; OS and LV/DSC were re-installed to try to fix the problem, no luck)
Details:
A test logged data at 1 Hz, with these results: for 10-30 seconds or so, the timestamps were correct. Then, the timestamps were compressed/shifted, with multiple points each second. At perfectly regular 1-minute intervals, the timestamps would be correct again. This pattern repeats, and when the data is graphed, it looks like regular 1-sec interval points, then more dense points, then no points until the next minute (not ON the minute, e.g.12:35:00, but after a minute, e.g.12:35:24, 12:36:24, 12:37:24...). Occasionally (but rarely), restarting the PC would produce accurate timestamps for several minutes running, but then the pattern would reappear in the middle of logging, no changes made.
Test info:
- shared variable configured with logging enabled
- data changing by much more than the deadband
- new value written by Datasocket Write at a steady 1 Hz
- historic data retrieved by Read Traces
- Distributed System Manager shows correct and changing values continuously as they are written

Meg K. B. ,
It sounds like you are experiencing Time Stamp Counter (TSC) Drift as mentioned in the KB's for the AMD Multi-Core processors. However, according to this wikipedia article on TSC's, the Intel Core 2 Duo's "time-stamp counter increments at a constant rate.......Constant TSC behavior ensures that the duration of each clock tick is
uniform and supports the use of the TSC as a wall clock timer even if
the processor core changes frequency." This seems to suggest that it would be not be the case that you are seeing the issue mentioned in the KBs.
Can you provide the exact modle of the Core 2 Duo processor that you are using?
Ben Sisney
FlexRIO V&V Engineer
National Instruments

I am looking at buying a MacBook Air over the Pro mainly for the 12 hour battery. Just wondering if battery is compromised by upgrading to 8mb and upgrading to I7 Intel dual core. I am not very tech savvy so apologies if dumb question

I am looking at buying a MacBook Air over the Pro mainly for the 12 hour battery. Just wondering if battery is compromised by upgrading to 8mb and upgrading to I7 Intel dual core. I am not very tech savvy so apologies if dumb question

If both computers were configured identically, then they would both lose the same amount of battery life with respect to the same starting configuration - comparing apple to apples. I don't know how much the added RAM, etc. would reduce battery life, but it would be less for both models.
Battery life is a tricky subject because most mfgr.s like to suggest as long a life as possible, but often do so under a set of conditions that are not common to most users. Apple is no different. Their computers do have good battery life, however. But not likely as long as what is in the ads for the typical user.

Skype video crashes my GPU driver and causes blue screen.

Hello,
Installed a new copy of windows and got the latest version of skype for my PC (on wich skype worked just fine, video calls, voice calls, but it was an older version. No hardware changes)
With the new skype, I , for the least, get driver crashes, and for the most, a blue screen, when I just go to options to set up my webcam.As soon as I see the square "loading" my webcam in the options, everything freezes and I get a driver crash or a blue screen.
Current specs:
i5 4440, stock clocks
2x8gb 1333 ddr3 1.5v ram, stock
R7 260x, stock
500w PSU, not the best quality, But I also tried a 1000w platinum PSU, and same resaults.
last error code I remeber from the blue screen was: 0x00000116
I know it is related to the GPU, but it doesn't have power deficiency, since I manage to run heavy games just fine.By the way, my webcam works just fine on different web sites, so it's not the webcam.
What I tried:
-Degrading to the oldest supported version by skype
-Degrading video drivers
-Using different webcams
-Installed all windows 7 64 bit updates
edit:
skype 6.14 works, but newer versions crash my GPU drivers and cause blue screen

I would suggest uninstalling Droidcam as it could be the source of some delays assisting in causing the problem. TDR problems occur when your videocard is unable to respond in 2 seconds for a variety of reasons (heat, tweaks), forcefully resetting the card. Some people increase this delay in their registry from 2 to up to 10 seconds to give the card time to catch up so that a reset doesn't occur. You can try this MS fix it which increases this delay. https://support.microsoft.com/en-us/kb/2665946

BB Desktop Software causes Blue Screen at Windows XP

Hi,
I'm using BB Desktop Software 6.1.0.35 at Windows XP over Lenovo X201 laptop. When I try to sync the adressbook or calendar between my BB(Storm II 9520) and my laptop, it often causes blue screen at my laptop.
I tried to uninstall and reinstall the desktop software but the blue screen occures again. But, the same version of Desktop Software at Windows VISTA over HP pavillion Desktop doesn't cause similar problem.
Please kindly let me know how can I fix it or please check if there are any defects at your Desktop Software.
If you need, I can send the screenshot to you via email.
Best Regards,

Just unisntall this version and install the desktop version 5.1. That will not give you blue screen infact it is fully compatible with xp
Need any help please let me know

Mac OS X Lion works on Macbook Air with Processor Intel dual core?

Mac OS X Lion works on Macbook Air with Processor Intel dual core?

Lion System Requirements
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Some features require an Apple ID; terms apply.

Installation of solaris 10 on x86 intel dual core or core 2 duo

hi all,
while i am installing solaris 10 on x86 machine which has 250 GB hard disk and 4 GB RAM with intel dual core processor
the first steps are going cool i.e. in the first cd it asks about partitions and it is accepting the partitions and also the partitions sizes what i am giving are:
/ -- 30 GB, /etc -- 6GB, /home -- 6GB, /usr -- 6GB, /export/home -- 100GB, /var -- 9GB, swap-- 10GB
and after the first CD got installed it asks for restart the system and when it
boots then i am getting the booting option and i selected it as solaris and one more thing to tell is it has already Windows XP pro+sp2
after selecting it boots with solaris and
after few seconds it restarts
please tell me if any body knows that is there any compatability issue with the processor that solaris is not going to support for intel core 2 duo or dual core processors
looking for the good reply

OK, so what are the options if we run the HCL check and come up with some incompatibilities??
I have Solaris 11/06 (from DVD media) installed on a brand new Dell Inspiron 530 (dual boot with XP). After the grub menu appears, and selecting 'Solaris', it takes about 3 minutes to get to a command line. I get a few errors at that time, such as:
file in / differ from the boot archive: /etc/path_to_inst
cannot find /etc/devices/mdi_ib_cache: no such file
I tried running 'svcadm clear system/boot-archive' and it seems to attempt to boot into a graphical CDE, but I just end up with an unintelligible multi-colored display, and need to power off.
I've checked the HCL and found some incompatibilities, but I don't know how to work-around these?
Running the Hardware compatibility test came up with the following:
No Solaris Driver
No Solaris Driver
Communication
Conexant
HSF 56k Data/Fax Modem
No Solaris Driver
No Solaris Driver
Network
Intel Corporation
*82562V-2 10/100 Network Connection*
No Solaris Driver
No Solaris Driver
Multimedia
Intel Corporation
HD Audio Controller
Can I simply disable the Modem and the HD audio in windows XP device manager, then reboot to Solaris, to get around these two (I tried this already)??
For the network card driver incompatibility, there is a Sun doc that says the workaround is to run: update_drv -a -i '"pci8086,1064"' iprb, but when I run this command at the initial Solaris command line, or try to edit any file for that matter, I get the error "read-only file system" Seems I have my hands tied in maintenance mode.
Thanks.

KLaptop with intel dual core?

Hey
Does anyone know how to make KLaptop change the performance governor for both CPUs
on Intel Dual Core processors?
Now, when I plug in or out the power supply, only the first (0) processor's governor is changed.
Tnx
Fiod

I tried to install kpowersave-devel from AUR using the last comments (about unsermake instead of make). It cannot install:
checking for Qt... configure: error: Qt (>= Qt 3.2 and < 4.0) (headers and libraries) not found. Please check your installation!
For more details about this problem, look at the end of config.log.
no file Makefile present
while
[cheer@lap ~]$ pacman -Qi qt
Name : qt
Version : 3.3.8-5
What does it mean, does anyone know?

Why is it that the new macbook pro processor upgrade option only offers up to 2.8 Ghz with Intel Dual Core i7, when back in Sep 12 I bought a 2.9 Ghz Intel Dual Core i7 Macbook, is the new one tuned to go much faster anyway?

Why is it that the new Macbook Pro processor upgrade option only offers up to 2.8 Ghz boosting to 3.3 Ghz with Intel Dual Core i7, when back in Sep 12 I bought a 2.9 Ghz boosting to 3.6 Ghz Intel Dual Core i7 Macbook, is the new one tuned somehow to go much faster anyway, or will the new one be slower in fact? Or does the solid state drive compensate for the lack of increased processor capacity?

The CPU's come from different Intel 'families'. The older ones are 'Ivy Bridge' and the newer ones are 'Haswell'. Numbers alone will not determine the efficiency of CPU.
Ciao.

Solaris on Intel Dual Core Solo 2GHz Processor

Hi
Does anyone know if Solaris 10 X86 supports Intel Dual Core (solo) 2GHz processors?
Thanks

Don't know, and a quick cursory scan of the HCL didn't pop up anything in my face, but you can find out for yourself, and get some Sun swag, by going to http://www.sun.com/software/solaris/contest/hcl.jsp and downloading the app that will tell you if it will run or not.
You can also help out the community by returning your results to Sun for reference by other people.
All this is, of course, assuming you have the machine already...
(no affiliation with the HCL guys, I make no money off this, etc., etc.)

What operating system can I upgrade my 2006 MacBook Pro 17" inch to if it has a 2.16Gh Intel dual core and 2G ram?

What operating system can I upgrade my 2006 MacBook Pro 17" inch to if it has a 2.16Gh Intel dual core and 2G ram?

A Core Solo or Core Duo Mac can go to Mac OS X 10.6.8. A Core 2 Duo or better can go to Mac OS X 10.7.2.
(63169)

Will Photoshop Elements 10 work on an iMac with an Intel Dual Core processor?

Will Photoshop Elements 10 work on an iMac with an Intel Dual Core processor?

Thanks Vikrant.
I have an iMac with the following:
Model Name:          iMac
Model Identifier:          iMac8,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.4 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          6 MB
Memory:          1 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          IM81.00C1.B00
SMC Version (system):          1.29f1
When I insert disc 3 to install it just makes some odd noises and spits the disc out!
Perversly Disc 1 for Windows it reads...

What version of FCP runs best on a PRE-INTEL dual core G5 Power-Mac?

What version of FCP runs best on a PRE-INTEL dual core G5 Power-Mac?

FCP 5.0, 5.1 or FCP 6 will work fine with your G5 and OS.
-DH

Intel Dual-Core CPU temperature Range?

I am a bit puzzled by exactly what is the reasonable temperature range for an Intel Dual-Core CPU. I currently own a PPC MacMini which never goes above 43C. I also have a system with Athlon64 and the CPU doesn't go over 50C. The number of 80C just seems unreasonable.
While I can understand some people think the high temperature is ok as long as the surface is not uncomfortable to touch, I can't help but wondering what effect it has to the CPU itself; or to the other components.
Anyone knows where to find such information (operating temperature range) from Intel?

You are familar with desktop processors and their associated temperatures. It is fairly common for notebooks CPUs to run anywhere between 50C - 80C. Intel specs the Core processors to 100C before the CPU starts throttling down to reduce the CPU temp.

Intels Dual-Core technology causes Blue-Screen in LabVIEW 7.1 on Windows XP SP2

Similar Messages

Maybe you are looking for