Inter Company PO to SO cycle

Hello All,
I have to test a business scenatio, where i am creating a PO in Sales org ABC and a correcponding SO should be created in Sales Org XYZ.
On saving this PO an outbound IDOC is generated successfully, but the corresponding Incomming IDOC fails with following 2 error messages.
1) "VKORG, VTWEG, SPART cannot be determined for customer 0000008000 , vendor 0000500089"
In the first error message it referes to Customer 8000, where as this is not the customer number.
2) "Partner number 0000008000 for customer 8506 , partner function WE does not exist".
In the second error message system refers to partner 8000, and customer 8506.
Where as 8506 is a plant.
I need help in getting rid of this error message in incomming IDOC's. If anyone has worked on such a business scenario and have any clue on how to resolve this, request to let me know the solution.
Points assured.

hi,
You should have the plant as customer also in customer master.look at the intercompany stock transfer
even though it is happenning within a company receiving plant must be customer and sending plant must
be vendor in the respective masters.
try the cycle after doing this.your problem must be solved.
Thanking you,
best regards,
R.Srinivasan

Similar Messages

STO - Inter COmpany

Hi All,
In case of STO between company codes, When we post the Goods Issue from the supplying plant/Company code, what should be the accounting entries ?
Can anybody explain me the Complete cycle acc entries ?
regds,
CB

Hi
Inthe Inter company STO
GI account document generating
GR no account document generating
GI BSX _Ve -stock of supplying plant reduced
BSX+Ve-stock of receiveing plant incrased
GR no accounting documents generating because at the time of GI system post stock to recieving plants
Regards
Channa

PO Number Check on an Inter-Company Consignment Fill-up Order

Hi Gurus,
I am working on an Inter-Company Consignment Fillup Scenario. When i create an order in CRM the order is error free. Upon replication i get an error. The error message is
Purchase order "TEST PO" does not exist in the system (see long text) (Notification E V1 583) - TEST PO is the PO entered.
The requirement is to enter any PO and ECC should not check if a Purchase Order exists for the PO entered in ECC.
This was working before we applied support packs in our environment 10 days back.
Well we do not create orders in ECC, if i try to create one in ECC the error is
Purchase order Test PO does not exist in the system
Message no. V1583
Diagnosis
You are creating an order for a consolidated company and must eliminate internal business volume. For this reason, the system tries to determine if the related purchase order exists. This is not the case, however.
Procedure
Enter the relevant purchase order number
Thanks,
Kiran AV

<b>Consignment Cycle:</b>
1. Consignment fill up:
Sales document type is KB
Item category KBN
schedule line category 1
In this step, you are not invoicing the customer. document flow is sales order -
delivery item category. It will not be relevant for billing and pricing because you are not charging money for these goods in this step.
In schedule line category, you will set movement type 631 & set for availability check and TOR.
2. Consignment Issue.
Once the customer informed you that he used all the goods or partial goods then you will create consignment issue for used goods.
Sales document: KE
Item category: KEN
schedule line category: C0 or C1
Here you are invoicing the customer(because he used the goods). you are assigning the delivery document and billing document to the sales document.
In item category, you are setting relevant for billing, pricing, special stock.
In schedule line category, your setting is 633 movement type, relevant for availability check & TOR.
3. Consignment Return:
Customer found that some goods are damaged or he not able to sold the goods he want to send it back. that you are creating this document.
Sales document type: KR
Item category: KRN
You will assign delivery document and billing to sales document. you will create return order, return delivery, return billing.
Your setting item category relevant for billing, returns, pricing, special stock.
Your setting schedule line item category: 634 movement type, NO availability NO TOR.
4. Consignment Pick up:
Even if you create the consignment return the goods are not come to direct to your plant. For that you need to create consignment pick up. here the owner ship is not changing so you do not need to create billing.
Assign return delivery to sales document type.
Sales document: KA
Item category: KAN
Regards,
Rajesh Banka

Inter company PR through MRP Execution

Hi Guys ,
Greetings!
How to get Inter company PR through MRP Execution
Note: i have done required configuration setting in MRP still i am unable to get the same.
Thanks in advances
Regards:
xxxxxxx

Hi Tata,
Say Plant X supplies to Plant Z and they belong to different company codes,
Create a special procurement key in plant X using transaction "OMD9". The key should be a copy of "40" or it self with defination that Plant Z as Special procurement plant.
Assign this special procurement key to material master in Plant X- MRP2 view, and in plant Z the defination of this material should be "E" - Inhouse production with BOM & Routing for production.
You should also setup the customer and assign that in the shipping data for plants in the mm-sto settings of SPRO. Here you also need to maintain the delivery/billing type and availability checks.
With this settings now if a Stock Transfer PO is created in Plant X againsts Plant Z or if a demand exists for the material in Plant X, the requirement is transfered to the plant Z and planned order is created for the same after MRP run based on the MRP parameters set in the material master in Plant Z.
Once GR is done with referance to the STO in Plant Z and PGI is carried out.
Once the material is recieved in Plant X, GR is created for the STO. This completes the logistic cycle.
Thanks
Bala

Inter company sub-contracting order

Hi all!
Can anyone tell me the complete configuration settings for an Inter company sub-contracting order and the process in detail.
Thanks in advance,
Raj.

create the vendor in the name of that company
if its ur own company u can make ur plant as vendor and issu material for subcontracting
Process cycle:
1. PO creation
Use item category--> L
Taxcode --> zero taxcode
Enter the components of the material manually, if the product material doesn't have the BOM created.
2. Transfer posting to issue the material to the subcontracting vendor. Tcode--> MB1B
USE MVT. TYPE --> 541
POST THE DOCUMENT
3. FOR EXCISEBLE MATERIAL,CREATE A SUBCONTRACTING CHALLAN USING TCODE --> J1IS AND W/ REF TO THE TRANSFER POSTED DOC. NUMBER.
4. GOODS RECEIPT
NORMAL GR WITH REF. TO PO AND MVT. TYPE 101, ENTER THE RELEVANT CHALLAN # IN THE POPUP WINDOW.
5. TCODE--> J1IFQ
RECONCILE THE QTY.
6. TCODE--> J1IF13
COMPLETE THE CONFIRMATION PROCESS OF THE RECONCILED QTY.
7. TCODE--> MIRO
INVOICE PAYMENT FOR THE VENDOR
regards
kunal

Inter Company Configuration required

Hi Guru's
I had Completed Partial configration for inter Company scenario, Can any one send me the complete or step by step comfigration for the same.
I have run the cycle for ordering company, but am colud not able to find suppling company configration/ or invoice process for the same.

Hi please check if something is missing !
An Intercompany sale transaction takes place when a sale occurs & the selling sales organisation belongs to a different company code than that of the delivery plant.
Intercompany business processing describes business transactions, which take place between two companies (company codes) belonging to one organization. The ordering company orders goods from a plant, which is assigned to another company code.
Ordering company Supplying company
Company code: 5555 1000
Sale Organization: 5555 PBIL
Distribution channel: 56 PW
Division: 58 GC
Plant: 5555 1000
Customer: 215 Product: Nimsulied
Ent Stru- Assignment- SD- Assignment- SD- Assign Sales Organization: Distribution Channel- Plant
Sales Organization Distribution Channel Plant
PBIL PW 1000/ 5555
5555 56 5555/ 1000
SPRO- IMG- SD- Billing- Intercompany Billing:
o Define Order types for Intercompany billing
o Assign organizational units by plant
o Define internal customer no by sales organization
Assign Sales Doc relevant for Intercompany billing
o PORIV
o ORIV
Assign Organizational Units by plant: assign sales area of ordering company to the delivery plant.
o 1000 5555 56- 58
Plant Descp Sales Organisation Descp Distribution Descp Division Descp
1000 5555 56 55
Define internal customer no by sales orgn: create the customer of the ordering company in the company code of the delivering plant, but with the sales area of the ordering the company
Sales Orgn Descp Customer Inter Comp Descp
PBIL 215
Pricing procedure: PI01 (Intercompany pricing)
Determination Rule: OVKK
PBIL PW GC A 1 RVAA01
PBIL PW GC I 1 ICAA01
VK11: PI01
Create Order: VA01: POR: 5555-56-58: customer- 215, product- Nimulid, supplying plant: 1000.
Delivery
Goods issue
Invoice for customer
Invoice Intercompany billing
Configure Intercompany Stock Transport Order
Material should exist in both the plants (Delivering & Ordering),
Internal customer should be assaigned to the ordering plant ( MM -> Purchasing -> Purchase Order -> Setup stock transport order -> assign the internal customer to the ordering plant and assign the Sales area of the internal customer.
Assign its Sales area to the delivering plant
Assign the document type and Delivery type NB and NLCC
Assign the Supplying plant --> Receiving Plant --> NB
Take the delivering plant and assign the sales area.
Vendor master has to be created and assaign the supply source ( Delivering Plant).
Create a puchase order ME21N ---> Save
Delivery VL10 G ---> Calculation rule (appropriate) --> Assaign the purchase order number here and execute.
Select the Delivery creation line and do the back ground process.
Start the log display and see the delivery document number by the documents button
Goto VL02N --> do picking and PGI --> Then do the MIGO with respect to the delivery document.
Billing (Intercompany pricing conditions should be set).
Thanks and Regards

Free goods in STO & Inter company PO

Hi Friends
I have one scenario where I get article as free with other Articles, the same free article may get from with out free from some other vendor also. but this free article should be distributed to store with STO and Inter company PO.
problem in PO
I have entered free goods item in a new line item in inter company PO and tick free goods indicator & also created outbound delivery but when I am creating Invoice in VF01 I am only getting one article but not free article...
problem in STO
when I am entering article then free Item indicator is disappearing from line item & I need to do outbound delivery in VL10F
please suggest
Thanks & Regards
Sudha.

can any one help me on this
regd
sudha

Credit memo for Inter-company billing

Hi
We are trying to create a credit memo with reference to an inter company billing document. The business requirement is to create a credit memo to adjust the invoice value due to wrong value posted in the original inter-company invoice. Hence we do not want to use the sales returns route for this.
So, we are trying to create a credit memo request (ZCR) in VA01 with reference to the Inter company billing document (ZIV). We have maintained the copy control between ZCR and ZIV.
However, when creating a credit memo request (ZCR) with respect to the intercompany billing document, we get the below error in the sales order.
"Item category ZNLC is not defined" and "Check Item copy" with Message No: V1324.
ZNLC is the item category that we used in the intercompany delivery document.
We are able to ignore this message in sales order screen and save the credit memo request in VA01 and also create credit memo (ZG2) in VF01.
Pl provide your inputs on whether we are missing any other configuration.
Regards,
John

Hi
I have maintained the item level copy control settings as below.
In the copy control (VTAF) between ZCR (Credit memo request) and ZIV (Inter company billing) at the item level for ZNLC (Inter company item category coming source document), the following setup has been maintained
Copying requirements : 303
Copy schedule lines : Blank
Pos / neg qty : Blank
Pricing type : D
Update doc flow : X
Do not copy batch : blank
Pl let me know if there are any other settings to be done in config.
Thanks,
John

Questions on Inter-company and Cross-company sales ordering process..

Hi,
I understood the delivery plant and the sales org. is not in the same company code might be the process, but i want to know some details especially in SAP system how it is realized and processed, hope could kindly help me on below questions!! thanks!!
1)what is the difference between inter-company sales and Cross-company sales??
2)What is the general document flow and config. when in below 2 cases:
Suppose the 2 company code under same sap client system, then what kinds of company code,plant config within the system for inter-compan and cross-company, and finally what kind of document flow will it be in the system.
Suppose the 2 company code is under diff sap system, then what kind of doc flow in each sap system for inter-company and cross-company sales process???
Thank you very much!!!!

Hi,
Basically there are totally Three types of scenarios
1. Intra Compnay Stock Transport Order
In this type of scenario, the stock is transfered between Two Plants which are under the same Compnay Code. The document type used here is UB. Here in this scenario the owner ship on the stock is not changed thats way there will not be any Invoice. The process as follows
a. Create Purchase Order with document type UB - ME21N
b. Create Replenishment Delivery with Document type NL - VL10B
c. Picking and PGI - VL02N
Now stock will be shown in Transit, you can check this using T.Code MB5T.
d. Do MIGO to receive the stock into ordering plant.
2. Inter Compnay Stock Transport Order
This is called as Cross Compnay STO. Here the stock is sent from one plant to another plant which are in two different Compnay codes. That means the Ownership on the stock is changed in this scenario, that way there will be Intercompnay Invoice IV is reaised. Here the stock is just moved to one plant to another plant but not to any customer.
The Process is as follows
a. Create a PO using type NB - ME21N
b. Create a Cross Compnay Replenishment delivery using type NLCC - VL10B
c. Picking and PGI in VL02N
d. Inter Compnay Invoice IV is raised by Supplying Compnay code to the Ordering Compnay Code - VF01
for this a customer created in Supplying Compnay who represents the Ordering Compnay and the invoice is raised against to that customer.
e. MIGO to receive the stock in Ordering Plant
f. MIRO to do invoice verification and do Vendor account update. This also can be done by EDI triggering, to update the Vendor Account. That means with this step, ordering compnay will update into its vendor account that he has to give certain amount to the compnay who supplied the stock.
3. Inter Compnay Customer Sales
This is similer to the 2 process, but here instead of sending to Plant we will send the stock directly to Customer of other compnay code.
The process is as follows
a. Customer raises normal sales order in another compnay code of type OR - VA01
b. But if the plant of that compnay does not have stock, then in the order the plant is changed to other compnay code plant.
c. Delivery is created in supplying Compnay against this Order - VL01
d. Picking and PGI is done - VL02N
e. But the stock is sent direclty to customer from supplying plant.
f. Ordering compnay will raise normal invoice F2 to the customer
g. Supplying Compnay will raise Intercompnay invoice IV to the Ordering Compnay.
But for all these process there are some configurations can be done, like
the material should be extended to both the plants
a customer is created in supplying plant who represents the ordering plant so that IV can be generated to that customer.
Supplying Plants should be linked to ordering Sales Org and Distribution channel. etc.
Hope this is clear.
Thanks
Praveen

Inter Company Invoice is not created

Dear Friends,
When i am creating the Inter Company invoice through it is showing the log as
80011326 00000 Sales Org is not defined
Commercial invoice is created for the same delivery. when we see the document flow still delivery status is being Processing.
IN VF04 i entered Sold to party name and put the tick mark for Intercompany billing.
here it invoice due list showing the delivery number with out sales organization.
Please let me know what configuration i missed. do the needfull ASAP.
Thanks
Raju.

Dear Janardhan,
Please check these configuration settings in the IMG
SPRO>IMG>Sales and Distribution>Billing>Intercompany billing
-->Assign Organizational Units By Plant
-->Define Internal Customer Number By Sales Organization
I hope it will help you,
Regards,
Murali.

Error while creating Inter-company billing document

Hi All,
Help me to solve below error while creating inter-company billing document with ref to delivery document.
" 1190984113 000000 Company code is not defined"
Thanks for your help.

Hi
Please check wheather Customer has been extended to both company codes.Also check wheather 1190984113 is a G/L account.If it is a G/L account please check wheather it has been maintained in the company code or not.If it is not maintianed then kindly maintain the G/L account and then create the Intercompany billing document
Regards
Srinath

Inter - Company Stock Transport Order Issue

MM SAP Gurus,
When I try working on "inter company stock transport order between two company codes."
I found the errors while creating PO(using document type UB)
ie.
*1st Error -Material 1 not maintained in Plant 2.
2nd Error - Customer 1 does not exist (please check entry in plant 1)
3rd Error - Not possible to determine shipping data for material1)*
i couldnt find out the error................................
Here is the configuration done by me......
Company codes:c1,c2
Plant for c1:p1
Plant for c2:p2
I m going to create and transfer stock from p2 to p1.
Here i m using stock transport order with billing(SD)
Purchase org for c1:porg1
Vendor for c1,porg1:v1
I assigned plant p2 in additional purchase data of vendor v1.
Sales area for c2:sorg2,ds2,d2
Customer for sales area(sorg1,ds1,d1):cust1
Now i go to mm->purchasing->purchase order->setup for stock transport order
> for receiving plant p1 i assign cust1,sales area(sorg1,ds1,d1)
> delivery type for supplying plant:NLCC
>checking rule RP.
i assigned doc.type UB into receiving plant p1 and supplying plant p2.
Then, in ME21N used doc type UB, these r the errors::::::::::::::::::::::::::::::
*1st Error -Material 1 not maintained in Plant 2.
2nd Error - Customer 1 does not exist (please check entry in plant 1)
3rd Error - Not possible to determine shipping data for material1)*
I already maintained all this.
The doc type NB also I tried ,,,,,,,but same errors r being shown.
Also where to create the inter company a/cs for billing?
Please check the attached file for the error and let me know.
Thanks & Regards
Keerthi ...

Business partner
● Vendor master u2013 supplying plant
Create the vendor for the purchasing organization of the receiving plant.
Assign the vendor to the supplying plant in the vendor master record.
From the menu, choose Logistics ® Materials Management ® Purchasing ® Master Data ® Vendor ® Purchasing ® Change (Current). Go to the Purchasing View and choose Extras ® Additional Purchasing Data.
● Customer master u2013 receiving plant
Create a customer master record for the receiving plant. From this, both the address and the data that is relevant for shipping point determination, such as transportation zone and shipping condition are taken.
From the menu, choose Logistics ® Sales and Distribution ® Master Data ® Business Partner ® Customer ® Create.
The above is from help.SAP:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/4d/2b90dc43ad11d189410000e829fbbd/frameset.htm
Plz check this link for tht information.
So, basing on this: I have customer 1 and vendor 1 for CC1......
--> Customer 1 is assigned to the receiving plant with sales area1 in setup STO configuration.
--> Vendor 1 is assigned to the supplying plant in the vendor master.
--> My question for u is:
1) In ME21N, in the vendor field u assign the vendor from CC1 or CC2 (Because it says the vendor - external supplier if u read in F1 in tht vendor filed)
Company code , Purc Org, plant all this will be from CC1 in ME21N, right?????????
Material exists in both the plants P1 and P2.......right?????
2) How to configure the inter - company accounts for the billing in sd for this STO scenario.???
Please clarify these things.....
You will be appreciated and rewarded too.
Thanks
Keerthi

Error while creating inter-company invoice for stock transport

Hi ,
I am facing following errors while creating inter-company invoice for STO order.
We have scenario where standard PO is created in company code A & then replenishment delivery is created in company code B.While raising inter-company invoice to company code A, we are facing problem.
In replenishment delivery we have 10 line items. But when we try to do inter company invoice through VF01/VF04 we get following log
XXXXXXXXXX(delivery Number) 000000 Customer XXXXX: Customer master table KNVV is missing (VF-022)
XXXXXXXXXX (delivery Number)000010 The bill-to party could not be determined (VF-047)
XXXXXXXXXX (delivery Number)000010 The payer could not be determined (VF-048)
With this first line item from delivery is not flows to invoice & if we saves this invoice then it is get saved with account determination error as some of the data does not comes into invoice header like account assignment group for customer, Payment term, destination country,region, tax classification for customer etc. That means invoice gets created without first line item from delivery with account determination error & so,no accounting document gets generated.
I checked customer master for all SP,SH,BP,PY they are correctly maintained.This was working fine few months back, but not working now.
If anybody had come across such kind of scenario, your valuable inputs will be highly appreciated.
Thanks & kind regards,
Ganesh Palatshaha

Hello
Kindly check the sales area of customer involved, whether the customer maintain with sales area for STO.
If that is note the case the refer following link:
- Error VF 047 & 048 while creating Inter company billing
Regards
JP

Error in Inter company Billing while assigning the Sales line to supplying

Dear All Concern,
While I was doing Inter company I am getting error at the time of assignment of sales organization, Distribution channel and Plant
Error: VT343
May organization is like this
                                                            Ordering                          Supplying
Company Code                                       C1110                              C1120
Sales org                                                 C1110                              C1120
Distribution channel                                DS                                     D1
Division                                                    AH                                   A1
Plant                                                        C1110                              C1120
While assigning the Order sales Line to the Supplying Plant I am getting this error
Please try to help me.

Refer to this document and let me know whether its helpful . Make corrections accordingly
http://help.sap.com/saphelp_470/helpdata/en/dd/5614e7545a11d1a7020000e829fd11/content.htm

Order related inter company credit memo - Order status 'Not Invoiced'

Hi,
We have recently created 'Order related inter company credit memo' process for return Stock Transport Orders(STO). For this, we used order related billing (billing relevance = C i.e. Relevant for ord.-related billing - status acc.to target qty) with standard item category 'G2N'. The issue is even after invoicing, sales order item status is 'Not Invoiced' and header status is 'Open', hence these orders are picked up multiple times during background invoice run and multiple invoices are being created.
How do we control the 'Completion' status in order related inter company billing? VBUP-FKSAA is not changed even after billing document creation and remains as A i.e. Not yet processed. Do i need to check VBUP-FKIVP since this is inter company billing.
I have also tried with TVAP-FKREL as 'B' i.e. Relevant for order-related billing - status according to order quantity but of no use.
Please advise.
Thanks in advance.
Regards,
Ganesh
Edited by: Venkata Ganesh Perumalla on Nov 10, 2010 6:08 PM

HI,
Check too the Note 308989 - Consultant note for cross-company transactions
It says:
I.1.5 Returns request (IR) - returns delivery - customers credit memo -
intercompany credit memo (IG) (RETURNS)
The customer credit memo is created for the returns request and the
intercompany credit memo is created for the returns delivery.
Regards,
Eduardo

Inter Company PO to SO cycle

Similar Messages

Maybe you are looking for