Inter company STPO delivery address showing the storage location address

Hi Guys,
While creating inter company STPO (different CC), the system showing delivery address is Storage location address, but i want to change plant address.
Please help me how i can do this...
Thanks in advance
Regards
Chandru.

then delete the storage location in the PO item line.
the storage location is the most detailed information in the PO, and it has an adress. If you procure to that storage location (that has a different address to your plant adress) then it is logic and makes a lot of sense that your supplier sends the goods to this location and not to an address where the material is not needed.

Similar Messages

Deleting the storage location

Hi,
Can some one tell me how to delete the storage location. The situation is like this:
Sales order has been created for three different materials for a particular customer for a sales area.
When out bound delivery was created for this order for one of the material a storage location was automatically selected. But when i check the sales order for the same material storage location was not picked.
But the problem is that material is a non stock item and no storage location was maintined in the plant for that materil.
And without doing the PGI shipment was created and subsequently shipment cost document as well. Then finally service acceptance has been done and invoice reciept is completed.
Basically the material is RMC which is not a stock iteem.
So now we want to create the PGI for the outbound delivery or delete the storage location for that material from the out bound delivery.
Please explain the process in detail.
thanks in advance.
ravi k vinjamuri

Hi Ravi,
I am not clear as what you want to do? Can you pls explain your requirement clearly.
Regards,
Sreekanth
Message was edited by:
Sreekanth. V.T

How to get delivery address in STO for the storage location

Hi All,
We have to create STO from the reservation using MRP run. While system is creating the STO we need to populate the storage location address as delivery address (not the plant address ). How we can do that? what are teh settings required for this setup? please hlep in that.
Regrads,
Khan

Hello...
You can select the storage location in the line item itself which is adjecent to Plant for the line item.
Regards
Suresh

Delivery is to be done at the end user location not at the storage location

Hai Gurus.
I have a problem
I am working for a construction industry.. I had a storage location at say" X":. And in case of emergency for the material to the end user at different locations, delivery is to be done at the end user location not at the storage location.. Where to give the end user location address .As delivery address in PO item details will be plant address. pl help
regards
chandrasekhar

As i underdstand from your description of issue .You dont want to recive the material in the storage location of your main plant but you want to recive the goods directly to the end user from the vendor.This is typical scenario of Third party PO ..so kindly traise third part PO to vendor ..by changing the item category ...and so the delivery addfres popolutaed in ur PO will be directly from the ship to address from your sales order.rathewr than the storgae location you wd have specified in ur material master

I have iphone 5s which when i connect to import the pictures directly to my windows computer. a folder by the name of my phone appears in "My Computer" . when i open it, it shows the storage information and one icon to click on. when opened it shows

i have iphone 5s which when i connect to import the pictures directly to my windows computer. a folder by the name of my phone appears in "My Computer" . when i open it, it shows the storage information and one icon to click on. when opened it shows a couple of folders to click upon to view pictures. when i open the pictures folder and delete all the pictures , even then a lots of unclickable windows icons remain
i have attached the picture of that window's screenshot. plus when ever i try deleting them it says,
please help!.. i shall be really thankful.
iPhone 5s, iOS 8

I have the same issue and it has to do with iOS 8.2
Apple, please mend this ASAP. Really stupid change since iOS 8.1
If you for some reason must have many different folder make sure that you put the newst photo in the last folder so one can easily find a photo when I don't want to copy all photos to, let' say, my friend computer.

Make the Storage Location field in Grey mode in Delivery (picking Tab)

Hi Experts,
Pls suggest me to how make the storage location in Picking Tab of Delivery to Grey mode .
Regds
Rajiv

In tcode U have to enter Transaction code VL01N
Transaction variants field just Press F4 to get already buid transaction variant else u have to create the ur screen variant by clicking the button named Create in Below menu option .
If the variant already exist -> enter
u will get the data in the lower half of the screen , select the transaction Variant with field for storage location , generally datais distributed in delivry doc at header and item level so for storage location u have to take the one with item level data .
There u will find the all the fields which are there in Delivery doc at item level with check boxes in front of them please goto storage location field and check the check box saying output field ( This means this field will be display only) Save and try and create the delivery again.
This will be display only in VL01N

Blocking the Storage Locations from Delivery

Hi
We have maintained for a plant different Storage locations like FG-Store,PRD-Store,WIP-Store etc
If the same material exist in the FG-Store ,PRD-Store
Can i restrict the Delivery to Happen only from FG Store & not from PRD-Store ?
What is the config required for it?
Regards
AK
Edited by: Ajithk on Jun 15, 2010 1:46 PM

Hi,
Please check the path
SPRO-->MATERIAL MANAGEMENT->INVENTORY MANAGEMENT & PHYSICAL INVENTORY-->AUTHORISATION MANAGEMENT->AUTHORISATION CHECK FOR THE STORAGE LOCATION
In that choose your plant and storage location and activate the AUTHORISATION
and it maintain the authorisation profiles for the object M_MSEG_LGO and you can't create a goods mvoement from this storage location.
Please try this and revert
regards,
santosh

Function module does not update the storage location in delivery

Hello,
I've been trying to use SD_DELIVERY_UPDATE_PICKING to update the storage location in SD return deliveries, without any success. Any clues? The FM works fine when it comes to updating the picking quantity, but the storage location issue still persists.
Thanks in advance,
Joao

Hi Joao,
I have the same problem. I tried to find the FM SD_OUTB_DELIVERY_CHANGE but couldn't find it. Have you by any change specified the incorrect FM name here? If yes, can you please communicate the correct FM name?
Regards,
Divyaman

The storage location/batch function * is not defined here - Message no. M7116

Hi Experts,
we have a scenario - Project Subcontracting Purchase Order, Item Category - L and Account Assignment - Q.
Delivery created, one of the component is Batch managed and with Batch Spli Exists.
When performing Good Receipt in MB01 t-code for movement type 543 R (Special Stock), batch determination fails for batch split scenarios; we get the following error message:
The storage location/batch function * is not defined here:
Message no. M7116
The batch determination works fine, if the PO is with Item Category - L and Account assignment - Blank, then the movement type will be 543 O
Steps for Reconstruction
MB01, Mvt 101, enter SUBCON PO (Item Cat L and Account assignment
Q), SL
Delivery should have batch split
for 101 Mvt, system determine the batch
543 R Mvt should allow for wildcard search in batch field, the
wildcard search works for other Mvt like 543 O.
Note:
we foresee we have to maintain an entry in OMCG for Movement type 543 and Special Stock R.
543 o already exists there. But we are unable to Add/Delete any entry there.
Please advise.
Thanks and Regards,
Nagaraja Achar.

Hello Dennis,
try the new transaction (MIGO): Use the 'Distribute qty' pushbutton. For all goods receipts (with or without special stock) it is possible to create several batches.
Regards
Michael

How to change the storage location using BAPI_OUTB_DELIVERY_CHANGE

Hi !
I want to do batch split in the delivery using BAPI_OUTB_DELIVERY_CHANGE.
Can anyone tell me how to pass/change the storage location of each batch item.
Is there any other BAPI that can do the batch split and populate the storage location also for the split batches?
Regards,
Firoz.

Hi all,
BAPI_OUTB_DELIVERY_CHANGE can be used to do batch split and updating storage loaction against each item of an outbond delivey.
I have done that in the folllowing way:
1 > Firstly i have updated the storage location for each delivery item using 'BAPI_OUTB_DELIVERY_CHANGE' passing some mininal parameters.
   Fetch the item details from LIPS table based on the outbound delivery and pass the corresponding fields to item_data, item_control and item_data_spl parameters and passed into intenal table li_lips.
Loop at li_lips inti lw_lips.
    lw_item_data-deliv_numb           = lw_lips-vbeln.
    lw_item_data-deliv_item             = lw_lips-posnr.
    lw_item_data-material                = lw_lips-matnr.
    lw_item_data-fact_unit_nom      = lw_lips-umvkz.
    lw_item_data-fact_unit_denom = lw_lips-umvkn.
    lw_item_data-base_uom            = lw_lips-meins.
    lw_item_data-sales_unit            = lw_lips-vrkme.
    lw_item_control-deliv_numb      = lw_lips-vbeln.
    lw_item_control-deliv_item        = lw_lips-posnr.
    lw_item_data_spl-deliv_numb   = lw_lips-vbeln.
    lw_item_data_spl-deliv_item     = lw_lips-posnr.
    lw_item_data_spl-pick_denial   = 'X'.
    lw_item_data_spl-stge_loc       = v_lgort.
"(This would be your Storage Location which you want to be updated)
Appending work areas into internal table to pass as parameter
    APPEND lw_item_data_lgort     TO li_item_data_lgort .
Appending work areas into internal table to pass as parameter
    APPEND lw_item_control_lgort TO li_item_control_lgort.
Appending work areas into internal table to pass as parameter
    APPEND lw_item_data_spl_lgort TO li_item_data_spl_lgort.
endloop.
Passing the delivery no in the work area of header data
lw_header_data-deliv_numb           = v_delivery_no.
lw_header_control-deliv_numb       = v_delivery_no.
lw_header_tech_control-upd_ind   = 'U'.
Calling BAPI to change the Storage location
CALL FUNCTION 'BAPI_OUTB_DELIVERY_CHANGE'
    EXPORTING
      header_data       = lw_header_data
      header_control   = lw_header_control
      delivery               = v_delivery_no
      techn_control     = lw_header_tech_control
    TABLES
      item_data           = li_item_data
      item_control       = li_item_control
      return                 = li_return_change
      item_data_spl    = li_item_data_spl.
Calling BAPI to committ the task
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' .
2> Then i have used the same BAPI again 'BAPI_OUTB_DELIVERY_CHANGE' to do the batch split/update batch only(if required) and change the Actual Delivered Quantity.
Here you have to pass the same thing along with actual delivery qauntity and different batches to do batch split.
Here it is assumed that Batch numbers, actual delivered quantity are coming from an internal table i_lqua.
Looping through Internal table to get Bin details
LOOP AT i_lqua INTO w_lqua .
Clearing work area before use
    CLEAR : lw_item_data, lw_lips, lw_item_control, lw_item_data_spl.
Reading table comparing metrial number
    READ TABLE li_lips INTO lw_lips
    WITH KEY matnr = w_lqua-matnr BINARY SEARCH.
If read is successful, passing values from table
    IF sy-subrc EQ 0.
Passing the delivery details into Item level table
      lw_item_data-deliv_numb              = lw_lips-vbeln.
      lw_item_data-deliv_item                = lw_lips-posnr.
      lw_item_data-material                   = lw_lips-matnr.
      lw_item_data-batch                       = w_lqua-charg.
      lw_item_data-dlv_qty                    = w_lqua-verme.
      lw_item_data-dlv_qty_imunit         = w_lqua-verme.
      lw_item_data-base_uom               = w_lqua-meins.
      lw_item_data-hieraritem                = lw_lips-posnr.
      lw_item_data-usehieritm                = 1.
      lw_item_data-fact_unit_nom          = lw_lips-umvkz.
      lw_item_data-fact_unit_denom      = lw_lips-umvkn.
      lw_item_data-sales_unit                 = lw_lips-vrkme.
      lw_item_control-deliv_numb           = lw_lips-vbeln.
      lw_item_control-deliv_item             = lw_lips-posnr.
      lw_item_control-chg_delqty           = 'X'.
      lw_item_data_spl-deliv_numb        = lw_lips-vbeln.
      lw_item_data_spl-deliv_item          = lw_lips-posnr.
      lw_item_data_spl-stge_loc            = w_lqua-lgort.
      lw_item_data_spl-pick_denial        = 'X'
Appending work area into internal table to pass as parameter
      APPEND lw_item_data TO li_item_data.
Appending work area into internal table to pass as parameter
      APPEND lw_item_control TO li_item_control.
Appending work area into internal table to pass as parameter
      APPEND lw_item_data_spl TO li_item_data_spl.
Clearing work areas after use
      CLEAR : lw_item_data, w_lqua,lw_item_data_spl,lw_item_control,
                    lw_vbpok, lw_lips.
    ENDIF.
ENDLOOP.
Passing the delivery no in the work area of header data
lw_header_data-deliv_numb           = v_delivery_no.
lw_header_control-deliv_numb       = v_delivery_no.
lw_header_tech_control-upd_ind   = 'U'.
Calling BAPI to change the Batch/Batch-Split/Delivery Quantity
CALL FUNCTION 'BAPI_OUTB_DELIVERY_CHANGE'
    EXPORTING
      header_data           = lw_header_data
      header_control       = lw_header_control
      delivery                   = v_delivery_no
      techn_control         = lw_header_tech_control
    TABLES
      item_data                = li_item_data
      item_control            = li_item_control
      return                     = li_return_change
      item_data_spl         = li_item_data_spl.
Calling BAPI to committ the task
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' .
This is the only way which i found as better way to do the Batch split and updating storage location togetherly.
I hope this code will help you.

Maintained the storage location in MRPview2

Hi,
Though I have maintained storage location in MRP view2, while reversing the document from m.type 103 to 105 system is asking storage location in GR, then entered the storage location in GR, even though system is not allowing to post the GR because system is giving error message saying that inbound delivery storage location can not be changed to here.
We don not want to maintain the storage location in PO and Inbound delivery
We are creating inbound delivery in VL31N against the PO, after that posting the GR with m.type 103 once that is complete then will reverse the document from m.type 103 to 105 while reversing the document we are facing the above said problems.
Appreciate for your effective action.

Hi,
You have two queries:
1.You entered your required storage location in material master ,MRP2 screen to have Default storage location for external procurement, so that when you enter plant while creating the PO, this SL will be written automatically.This storage location nothing to with GR, during GR you need to enter your storage location.
2.While reversing the document you are facing the problems.
The movement types 103 is used for Goods receipt for purchase order into GR blocked stock & 105 is used for Release from GR blocked stock for purchase order.
But as you are reversing the document use 104 movement type instead of 105.
Regards,
Biju K

STO settings between the storage location

Hello,
I am trying to set up the STO between the storage location can anyone please tell me the detailed configuration steps. I have created the STO but in hte delivery the document is not displayed. please help me out here

Hi
SAP offers a STO process between storage loactions and this is not active in Standard SAP. You need to activate it and further deactivation can cause some discrepencies.
Follow the steps
1. SPRO > MM > Purchasing > Purchase order > Set up stock transfer between storage locations.
2. Activate stock trasfers between storage locations -> this will enable maintaining issuing storage location in thhe line item of the PO
3. If delivery based GI is required then
3. You need to set up delivery type, checking rule for a purchase order document type and issuing storage location
4. Define shipping data for the storage locations
This should help you with the process
with regards

MIGO user exit : MBCF0009 Filling the storage location field

Hi all,
I want to change the storage location filed after loading data (GR for PO, GI for network) before output (show in grid).
I found the exit MBCF0009 but it does not work. Any other way to do this ?
Thanks.
Wayne

Dera Suyog,
I try to use method line/item change, but I cannot find a solution.
Acctually I cannot change the value of cs_goitem and to display it.
Below is my code!
Pls help !
Please have a look on my code !
method IF_EX_MB_MIGO_BADI~LINE_MODIFY.
break skolev.
data: p_groes type mara-groes.
data: p_maktx type makt-maktx.
data: p_all type goitem-maktx.
data: p_len type p.
select single groes into p_groes
from mara
where matnr = cs_goitem-matnr.
select single maktx into p_maktx
from makt
where matnr = cs_goitem-matnr
and spras = sy-langu.
concatenate p_maktx p_groes into p_all SEPARATED BY space.
p_len = strlen( p_all ).
cs_goitem-maktx = p_all.
CALL METHOD cs_GOITEM->HOLD_DATA_SAVE( ).
break skolev.
endmethod.

Stop delivery creation for perticular Storage Location

Dear Experts
As per scenario we have two storage location 1) packing stock and 2) Ware House stock. All delivery are create from Ware house st.loaction.as per requiremnt we want to stop Delivery creation for Packing St.location.
Is ther any customization through which System should not Create Outbound delivery form Packing St.loaction,while doing this rest of things sholud not affect for that S.Loaction
Regards
Pash@SD

Go to SPRO-> Logistics Execution ->shipping ->picking->determine pikcing location ->assign picking location.
Here you can remove the packing stock storage location assignment to plant/shipping point/storage conditions combination and then test.
If this does not work, then check the path SPRO-> Logistics Execution ->shipping ->picking->define picking requirements. Here check any requirements is currently used. If so copy this routine and create a new routine to exclude the storage location (packing stock) from picking process.
Regards,

T code MB5B , the storage location will be reset

dear All,
I want to see stock on posting date of particular storage location with values. When i try T code MB5B and select valuated stock, (it says storage location will be reset). and i used another T code MC.9 and MC49 , but these T codes didn't meet our requirment .
the T Code MB5B , i can see the Material number, Material Description, Opening Stock, Opening Value, total Receipt Quantity, Total Receipt Values, Total Issues QNT, total Issues Value, closing Stock QNT, closing Stock Value.
i need these fields appears but per Storage Location.
Thanks a lot.
Mosab Ahmed Mostafa
Senior Application Consultant
Amer Group
Egypt, Cairo

Hi Mosab,
The system rejects any value entered in the fields "Storage Location",
"Movement Type" and "Batch" if you select the Valuated Stock mode for
the execution of MB5B.
Regarding the Storage Location, the system clears this field with the
message "Storage location will be reset" - Message no. M7284.
As soon as the Valuated Stock mode is selected, the system must remove
the Storage Location. The reason for this behaviour is that there is
not information on material's values on Storage Location level.
- MB5B in the Valuated Stock mode reads the entries from the material
valuation table MBEW of a material and valuation area to get the current
valuated stock and value.
- Then it reads the related MM and FI documents to calculate the stock
and values on start date. A valuation area could be assigned many
storage locations.
The related MM documents can belong to many storage locations.
In the case there are stock transfer postings from plant to plant
the MM documents do not contain a storage location.
So it makes no sense to calculate and display the valuated stocks
and values on Valuation Area level when the number of the selected
MM documents is incomplete. MB5B will deliver wrong results in this
case.
BR
Nadia Orlandi

Inter company STPO delivery address showing the storage location address

Similar Messages

Maybe you are looking for