Inter links not working, any way around?

Working on Nook using Safari, uploaded PDF to acrobat.com and inter links don't work. I've read in a forum about changing to PDF/a? however I can't locate where this would be in this situation.
This is a work project, many files such as this all with inter links that serve as task completion check ins. Really would like this setup to work.

I've found that down loading the PDF file to the Nook and using Acrobat reader allows the links to work, however this is way cumbersome, any way to work on files directly on Acorbat.com?

Similar Messages

Some browser links not working - any browser, but just on my mac

I have a strange issue. Over the last while certain page links on browser pages (which seem to be Java script links) won't work in any of my 5 browsers. If I put the same page in to any of my laptop's or my wife's browsers, the links work fine.
For example, I just tried to order some stuff via Staples, and whenever I tried to go to the next screen via a button, nothing happened. Even if I switched User Agents in Safari or Firefox, the "next" button didn't work. Same in Chrome, Camino, Flock and Opera on the same pages. I have noticed lots of drop down menus are not working properly either on many sites.
I figure some bit of OS code must be either blocking or misreading the instruction, but what?
Any ideas? Any input would be greatly appreciated!!

errmm... i'm not sure why you are fiddling with java and system extensions...
java has nothing to do with javascript despite the name (you can blame sun for that) the javascript engine is an integral part of the browser not a separate extension.
Java on the other hand is an entirely separate entity and language that is independent of any one browser and is installed on the OS.
Javascript is commonly used in webpages (all most all these days) where as java is hardly used at all and is usually confined to little "applets" that run separately from the rest of the page.
If you suspect that it is something to do with your settings/preferences in your library then the easiest way to find out is by creating a new User account (go to system preferences> users> and add a user.) Then log into that account and try the browsers in there.
If you really think that it has something to do with system extensions then you can disable them by moving them out of the extensions directory (/System/Library/Extensions/) However i must stress that unless you know what you are doing and know what the extension does that you are moving to not do so... you can easily render your system unbootable if you move the wrong extension... unless you have installed a 3rd party system extension there shouldn't be anything in that directory that isn't meant to be there (this is a very different system from OS 9).
However there are internet plugins that may be interfering with your browsers, you can find these in /Library/Internet Plugins/ you can disable these by moving them also... the defaults are various flash, java, shockwave, quartz and quicktime files.
Message was edited by: Thomas Brierley

Garbage collector does not work any way

when you unload some loaded swf file (Loaded with Loader
class) it's Event Listeners continue their jobs
is there anyway to solve this problem
for example please made three files
l1.fla , l2.fla , main.fla
in l1 creat a MovieClip with instance name "symbol_mc"
and type these code
this.addEventListener(Event.ENTER_FRAME,test1,false,0,true);
function test1(evt:Event){
trace("l1");
symbol_mc.addEventListener(Event.ENTER_FRAME,test2,false,0,true);
function test2(evt:Event){
trace("symbol");
in l2 only create a text to see if file is loaded
finally in main
create to buttons with instance names btn1_btn and btn2_btn
and add these codes
var lo:Loader;
var mc:MovieClip = new MovieClip();
this.addChild(mc);
function loadSomeFile(url:String) {
lo= new Loader();
this.addChild(lo);
lo.contentLoaderInfo.addEventListener(Event.COMPLETE,
movieLoaded);
lo.load(new URLRequest(url));
function movieLoaded(evt:Event) {
this.removeChild(mc);
mc = MovieClip(lo.content);
this.removeChild(lo);
this.addChild(mc);
lo=null;
btn1_btn.addEventListener(MouseEvent.CLICK,load1);
function load1(evt:MouseEvent) {
loadSomeFile("l1.swf");
btn2_btn.addEventListener(MouseEvent.CLICK,load2);
function load2(evt:MouseEvent) {
loadSomeFile("l2.swf");
create swf files l1 and l2 and then preview main
first try btn1_btn and then try btn2_btn you will see after
unloading l1 and loading l2 event listeners will continue their
jobs!!!!!!!
after loading l1 ev

did you checked what you write in adobe devnet?
you said i must null loader but i not only did it but also
unloaded that before but event continue his life
i think it is not error of loader class it is gc error for
another example of it's errors try this create 2 frame fla file
add one symbole in frame 2 and then add event listener to
enterframe event of symbol
with two button add navigation for going to frames one and
two
you will see each time you enter frame 2 another
eventlistener will add to symbol and for example if your listener
rotate symbol by one degree you will see each time speed will
increase because each of them rotate object 1 degree

My on/off button does not appear to be working on my iphone 3.....is there any way around this....anyway around this?...the phone also periodically just switches off.

my on/off button does not appear to be working on my iphone 3.....is there any way around this....anyway around this?...the phone also periodically just switches off.

Likely a hardware issue... no way around that except to get it repaired or don't use it (the button).
Try restoring to solve the switching off problem.

I have a work Mac, an air book, a home Mac; husband has desktop and laptop. That makes 5. My work computer was replaced and I do not know what the company did with it. I am not allowed to deauthorize all. Any way around the year limit?

I have a work Mac, an air book, a home Mac; husband has desktop and laptop. That makes 5. My work computer was replaced and I do not know what the company did with it. I am not allowed to deauthorize all because I did this within the last year when I got my new airbook. Any way around the year limit? I don't know if I can find my old computer and I don't want to wait months to be able to play my ituens purchases on my new work computer.

If oyu already used up your "deauthorize all" option, you need to contact support so they can make an excemption:
http://www.apple.com/support/itunes/contact/

Any way around not using Desktop mamager?

Hi guys is there any way around not using the desktop manager?, I find it way too bloated for my slow computer, all I wanna do is transfer some mp3's to my phone.
Thanks.

Hello,
Yup -- if you've installed the Desktop Software and enabled Mass Storage Mode, then your BB should appear as another drive letter in Windows...and you can treat it just like any other USB drive.
KB13564How to enable or disable mass storage mode on the BlackBerry smartphone
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I have a Netgear NAS which uses Stora software. Mavericsks will not let me install the software as it is not from an approved developer. Is there any way around this?

I have a Netgear NAS which uses Stora software. Mavericks will not let me install the software as it is not from an approved developer. Is there any way around this?

There is, but why do you need the s/w installed? The NAS should have a web admin interface, accessible via ip address (http://<ip address>) which should allow all the needed configuration that is required for it to work with machines running os x.
Try to install as little s/w as you need to do something in Mavericks or any OS as it is usually the cause of future issues or problems.
If you're intent on installing the s/w, go to System Preferences > Security & Privacy > General and If you have tried to run it before, it should be listed there. You can then "un-block" it should you wish.

I wanted to use verizon hotspot wifi with my ipad, but verizon states not compatible with operating system. States that needs windows 7 , Vista, or windows xp. Any ways around this? Any ideas?

I wanted to use verizon hotspot wifi with my ipad (it searaches for hotspots when ur on the go) but verizon states not compatible with operating system. States that it needs windows 7, Vista, or windows XP. Any ways around this? Any ideas?

Thank you everyone for reaching out and apologize for being unclear. Let me rephrase. There is NO MiFi.
I have an ipad3 and a PC
I am trying to connect the iPad3 to the PC for HotSpotting reason (the ability to use the internet on the PC)
Turning on HOT SPOT on the Apple ipad works GREAT when using it through WI-Fi and through Blue Tooth. But connecting it directly through the included iPad 3 USB Cable to the USB side of the PC does NOT work. I tried several PCs, and several Cables. Any other ideas

The monitor on my macbook is turned off while I was working, I could not in any way to do it again, I could see through the screen off the open pages I was working on, I had to turn off the machine and restart it. and it runs. O.O?

The monitor on my macbook is turned off while I was working, I could not in any way to do it again, I could see through the screen off the open pages I was working on, I had to turn off the machine and restart it. and it runs. WHAT 'success? The report says the console like this: (at approximately 12.30)
No receipt for 'com.apple.pkg.JamPackWorldMusicInstruments' found at '/'.
03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackWorldMusicInstruments' found at '/'.
03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackOneInstruments' found at '/'.
03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackOrchestralInstruments' found at '/'.
03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackRhythmSectionInstruments' found at '/'.
03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackRemixToolsInstruments' found at '/'.
03/05/11 12:08:32 MIDIServer [255] MIDIServer [255] starting; arch = i386
03/05/11 12:34:35 com.apple.launchd [1] *** launchd [1] has started up. ***
03/05/11 12:35:06 com.apple.launchd.peruser.501 [86] (com.apple.ReportCrash) Falling back to default Mach exception handlers. Could not find: com.apple.ReportCrash.Self
03/05/11 12:35:09 com.apple.launchd.peruser.501 [86] (com.apple.Kerberos.renew.plist [110]) Exited with exit code: 1
03/05/11 12:35:25 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:25 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:26 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:26 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:32 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:33 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:33 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:36:06 com.apple.WindowServer [64] Tue May 3 12:36:06 MacBook-Pro-17-of-Admin.local WindowServer [64] <error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint () to catch errors logged as They Are.
03/05/11 12:43:39 helpd [160] Response failed Because Listener can not find a port for this QueryID.
03/05/11 12:43:43 helpd [160] Response failed Because Listener can not find a port for this QueryID.
03/05/11 12:43:43 helpd [160] Response failed Because Listener can not find a port for this QueryID.

Do you have backups of all the data on the startup drive? If not, do nothing else until you've backed up that data, if you still can.

When I try to buy ibooks from my ipad, the virtual keyboard is not the same as my computer, and so as my password consists of numbers, letters and symbols my ipad keeps showing that my password is incorrect! Is there any way around this problem please?

When I try to buy ibooks from my ipad, the virtual keyboard is not the same as my computer keyboard, and since my password consists of letters, numbers and symbols, the ipad keeps displaying "incorrect password". Is there any way around this please anybody?

katykittenoid wrote:
the virtual keyboard is not the same as my computer keyboard
Are you using the virtual keyboard to input your password and you cannot see/find the characters you need on that keyboard?
Or are you trying to use a bluetooth keyboard and pressing the printed key does not produce the right character?

Working on Win 8.1, Downloaded PSE 13, installed, and it asks me for login every time I start the software. Any way around this? I want to use PSE on a machine that will be permanently offline.

Any way around this? I want to use PSE 13 on a workstation that will be permanently offline. I spent hours with Adobe support and they suggested deleting a file called
opm.db in the following location
[System drive]:\Users\[user name]\AppData\Local\Adobe\OOBE
and then rename the oobe folder to new oobe folder
But then our chat session automatically terminated and that's as far as I got.
Will this work?
Will I still have full functionality?
Can someone help? Thanks!
Desperate in Denver PA

hello, when this is happening after you've already updated firefox with your admin account, try to delete the ''updates'' folder and ''active-update.xml & updates.xml'' within the %localappdata% folder of your restricted account like it is described in http://kb.mozillazine.org/Software_Update#Software_Update_not_working_properly

Trying to connect my iMac to on 10.8.2 with PowerBook Intel on 10.5.8; sharing works from PowerBook to iMac but not the other way around. Why?

Trying to connect my iMac to on 10.8.2 with PowerBook Intel on 10.5.8; sharing works from PowerBook to iMac but not the other way around. Why?

Thanks for the interest. Preferences are similar on both machines: screen sharing, file sharing, printer sharing & scanner sharing all ticked and radio button for Screen Sharing is ON.
My confusion is that I can get a network connection to the iMac by selecting "go to server" on the PowerMac running 10.5.8 but am unable to make the iMac connect to the PowerMac using similar selections. When ethernet cable is plugged in the PowerMac shows up on the finder bar on the iMac, but it does not allow either screen sharing or connection to occur - a dialog box tells me to check System Prefs and Network connection.
I'm hoping to export a large file of photos from iPhoto on my iMac to my wife's PowerMac and hoped to achieve this with an ethernet network connection.

Why does the clone stamp work when I go from a darker colour to a lighter colour but not the other way around. How can I lighten up a dark area? Lasso tool takes from the wrong area too.

Why does the clone stamp work when I go from a darker color to a lighter color but not the other way around? How can I lighted a dark area? The Lasso tool takes from the wrong area.

c.pfaffenbichler wrote:
Why do you use the Blend Modes Lighter and Darker at all in this case and not simply Normal?
And what kept you from posting a screenshot?
I borrowed the image below for an HDR workshop I ran at the 2010 PSNZ National Convention, to demonstrate a method of removing halos. You'll remember that halos were a serious problem with early HDR, and while the halos in this image were caused by over sharpening, they are perfect for demonstrating this technique.
It relies on the fact that halos so often tend to put a lighter tone between the two areas where sharpening is being applied. Whether that is the sky abutting a dark line of hills, or the rock and little tower as in this image. I've uploaded it at the size it was supplied to me at (about 2700 pixels wide). So
Click to open the full image, right click and copy, and paste into Photoshop.
Select the clone tool, and set its blend mode to Darken.
Try to sample on a line horizontal to where you want to clone, to give the best tonal match, and start cloning.
Because the sky is darker than the halo, it overwrites it. But the rock is darker than the sky, so it has no affect.
It works even better if you clone on a new layer also set to Darken. No masking, just Photoshop blend mode magic.
You can also fix the little tower. Use a great big brush — just remember to sample horizontal to match the horizon.
Back then I was using the same trick with CAs after forgetting to fix them in ACR, and having done too much work to start again after spotting the problem.

I have programmed iCal and Address book to sync via MobileMe. The info I type in iCal and Address Book on the MacBook Pro gets updated on the iPad, but not the other way around. Any hints?

I have programmed iCal and Address book to sync via MobileMe. The info I type in iCal on the MacBook Pro get updated on the iPad, but not the other way around. Any hints?

Levi G B ... Also found another thread by Davidfromsurfside on 10/14/11 0703A with the same problem. I responded on his thread "I have the same problem. IOS5 on iPad1, iPad2 and iPhone4S all with iCloud on. Lion 10.7.2 installed on my MacBookPro and iCloud set up/on. Any new iCal entry on either iPad or on the iPhone ends up via iCloud on both iPads and iPhone. BUT NOT ON THE MacBookPro. And iCal entry on the MacBookPro does NOT GET SENT to iCloud.com or to either iPad or the iPhone. This is a huge problem for me because I do all my office scheduling on the iPad or iPhone but rely on the MakeBookPro to print out daily client lists. I REALLY need to get this fixed...it is causing major business issues. " No one so far has had a fix.... :(

HT4623 I updated to ios 7.1 on Thursday. My ipad basically does not work any more. I am running around in circles on this site and on other "forums" trying to fix. ??? Don't have time for this.....

I updated to ios 7.1 on Thursday. My ipad basically does not work any more. I am running around in circles on this site and on other "forums" trying to fix. ??? Don't have time for this.....Any advice appreciated.

give us more to work with in terms of info then "basically does not work any more"
it can be from it's on fire to the a key on the onscreen keyboard don't respond

Inter links not working, any way around?

Similar Messages

Maybe you are looking for