Inter site mail routing on AD site Link issue

Hi All,
1, we are facing issue between mail routing between two  AD site normal mail routed via AD site Link but when put an attachment it stuck in to site queue.
we have two AD site Site "A" has exchange 2007 SP-3 and Site "B" has exchange 2010 SP-3.
2, when we are migrating 2007 user's mailbox 2010 after mailbox migration user get a popup " Administrator has made  some changes ......................." after this when user restart his outlook client user can not connected as his mail server
settings are still older.
this is working properly for sites having Exchange, rest 2 sites not having any exchange, there we are getting this issue.
Please help.......
Thank You
Vinod
Vinod Kumar Dhiman

Hi Vinod,
Thank you for your question.
We could run the following command to check if the issue persist:
Set-SendConnector –Identity <SendConnectorname> -IgnoreStartTLS $false
You could also send NDR to [email protected] for our troubleshooting.
Ans:- between AD site mail rout via AD site Link and i have checked the size limit is "Unlimited"..
Did you mean you have checked the limited of send connector?
There are following limitation on Exchange server, we could check it by command:
Global/Organizational Limit: Get-TransportConfig
Send Connector: Get-SendConnector <send connector name>
Receive Connector: Get-ReceivConnector<receive connector name>
Active Directory SiteLink Limit:( you have check)
Server Limits(transport rule: 15M in this case)
User Level Limits: Get-Mailbox “User Name” | Format-Table Name,*Max*
If there are any questions regarding this issue, please be free to let me know. 
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support

Similar Messages

  • Content Server web sites link issue

    Hi all,
    MY version is 10R3 and i restored the venna Hosting Tutorial web site yesterday. when the site restored 100% ,i click the website links at web site tray and home page appears .
    But today the pages can not show by clicking the tray.
    Anyone knows why?
    Regards,
    Jiahua

    That error means that the content being imported has values for metadata that do not exist in your content server. You would need to add those values to your content server for the import to complete properly. It might require some digging to find out what those values are. You'll need to get into the archive, find the metadata for the file in question, and figure out what the metadata value is for the Website Object Type field (normally something like Image, Data File, Script, etc.), and ensure that value exists in the list of values for that metadata field on your server.
    -Jason Stortz
    http://www.redstonecontentsolutions.com
    http://www.corecontentonly.com

  • Inter-site navigation... link to open in the content area

    Wanted to know how people are managing inter-site navigation. Suppose I have a set of links defined in the LHS area by using a HTML portlet. URLs on all these links are internal links which can be accessed as http://<hostname>:<port>/pls/portal/url/page/<pagegroup|page>.
    Is it possible to define a portlet on the RHS i.e. content area where I can open these URLs ? Will the URL and/or Web Clipping help in any way ?
    I can define the URLs on these links as
    http://<hostname>:<port>/pls/portal/url/page/<pagegroup|page>?url=<page to show> and <pagegroup|page> is the page which holds the URL container. The URL container will be parameterized to bind to the url value.

    Check out this posting from a while ago that gives a suggestion on how to accomplish this.
    Re: WebDav Content in Portlet.
    Regards,
    Candace

  • Inter-Site Change Notification Not Working

    I made the change in ADSIEDIT to enable Inter-site change notification after adding a second AD site on our domain.
    The domain level and the old domain controllers in the main site are Server 2008 and the new domain controller for the new site is 2012 R2.
    I tested it by adding and deleting users on a domain controller and checking that the users were added or deleted on the domain controller at the other site.  It seemed to be working fine with that test. I could see the change within seconds.
    However, I noticed that group membership changes and account lockout status are not updating quickly between sites.
    I went back to ADSIEdit and saw that the "1" that I had entered in options a few days earlier was gone and it shows <not set> again.
    I put the 1 back in and then when to a different domain controller and it still shows not set there.
    What needs to be done to make sure that these changes stick and replicate between sites?

    Have you enabled change-notifications on the site link according to?
    http://www.ryanjadams.com/2010/05/turbo-charge-active-directory/#axzz2PaGkqbUu
    Account Lockout attributes such as PwdBadCount and BadPasswordTime are NONE replicated attributes and should contain unique values on each DC, so they might not be the best to verify change-notifications against, moreover not all group memberships
    are replicated to a DC if it's not GC in a multi-domain environment.
    Do you have any manual connection objects (e.g.) not managed by the KCC? If so those needs to be changed back to be managed by the KCC if the change-notification option should be automatically propagated down from the site link, or either you have to enable
    change-notifications manually as well on those connection objects, have a look at:
    http://www.ryanjadams.com/2010/05/turbo-charge-active-directory/#axzz2PaGkqbUu
    This script can help you find out if you do have manual connection objects:
    Get-ADReplicationConnection -Filter {AutoGenerated -eq $False} |
    Select-Object Name,AutoGenerated,ReplicateToDirectoryServer,ReplicateFromDirectoryServer |
    Out-GridView
    Enfo Zipper
    Christoffer Andersson – Principal Advisor
    http://blogs.chrisse.se - Directory Services Blog

  • Active Directory Logon / Site Link Bridge Issue

    Dear NC,
    i have an issue with users in different Locations, to explain easyest here is a little network diagram:
    So, as one can see, i have 4 Locations, one is the Headquarter.
    The Target Goal is: Users in Location C must Logon with Domaincredentials from Sub.domain.tld from Location A.
    Location HQ, A and B are fully routed, Location C has only a route to Location B.
    Every Location has at least one writable DC with GC ans DNS Server installed.
    I have the following site links:
    HQ<>A
    HQ<>B
    A<>B
    B<>C
    and also a Site Link Bridge with "A<>B" and "B<>C".
    Unfortunatly Users cannot logon in Location C with sub.domain.tld Domaincredentials from Location A.
    Need a bit help, thx :-)
    -Bernd

    Hi Bernd,
    I am sorry that I am a little confused here, would you please clarify what do you mean by “Users in Location C must Logon with Domaincredentials from Sub.domain.tld from Location A”?
    From what I understand, you have two domains:
    domain.tld and sub.domain.tld, and you want that user accounts in
    sub.domain.tld (location A) can logon from domain.tld (location C), am I right?
    If that is your goal, please make sure the following conditions are true:
    During the logon process, specify the right domain name which is like
    @sub.domain.tld.
    The GC in location C is available to identify the appropriate Domain Controller for authentication process.
    There is no network connectivity issues between location A and C, because after GC located a DC in location A, the logon process will take place between location A and C.
    In addition, every site should have good network connectivity with at least another site to keep AD replication healthy. If there are critical errors in your HQ site, we should try
    to resolve them.
    Here is a related article below for your reference:
    What Is the Global Catalog?
    http://technet.microsoft.com/en-us/library/cc728188(v=WS.10).aspx
    Please feel free to let us know if there are any further requirements.
    Amy Wang

  • Site Link Membership

    Can an AD site be a member of two different site links?
    Our network is a full mesh MPLS with various link speeds so I would like to control what sites replicate with each other. For example, for 4 sites with the same high speed links I was going to create a site link called Core and set replication schedule to
    every 60 minutes:
    When sites are part of a site link, is a full mesh topology automatically created between them?
    Also, if I then wanted to force a site with a low speed link to only replicate with one of the 4 core sites I.E. Site A would i just create another site link and add the core site and the new site? If so how would costing affect this scenario if at all?

    Please keep in mind that just because you can do something, doesn't mean that you should.  I have managed and advised site topology for years for hundreds of companies and only
    very rarely is there a need to do what you are describing.  Unless there is a specific business reason for doing so, I would personally not mess with the site link costing.  Keep in mind, that technology was born from the need of the day. 
    When AD was introduced, connection speeds were painfully slow and bandwidth needed to be managed.  Admins needed to prevent replication from saturating connections needed for business apps and users.  Remember, a high speed link in those days 128k
    to 256k.  A far cry from the performance of every MPLS network I have seen. 
    Replication topology is largely controlled by the KCC and ISTG and I guarantee you can't out think the algorithm it uses.  By throttling your replication you are effectively killing performance.  For a fully routed MPLS network I would either
    use the defaults or even consider using Change Notification so you are sending smaller chunks more often. 
    Again, unless you have a specific business reason for doing what you are proposing, I would recommend leaving it alone. My 2 cents.

  • AD Site - do I need 1 Inter-Site Trnasport or I need more?

    AD Site - do I need 1 Inter-Site Trnasport or I need more?
    Dear Reader,
    I have 4 AD Sites connected using MPLS as following:
    Site1: DC01 8 MB Connection Speed
    Site2: DC02 8 MB Connection Speed
    Site 3: RODC01 1 MB Connection Speed
    Site 4: RODC02 1 MB Connection Speed
    All sites are connected to each other (its like a mesh), currently I have only 1 Inter-Site Transport link.
    I need to know the recommendation for the following:
    What is the advantage and disadvantage of having only 1 Inter-Site Trnasport Link?
    Is it recommended for my current WAN connectivity to have only 1 Inter-Site Trnasport Link?
    for those 4 sites, How many Inter-Site Transport links I have to made?
    In Properties of each of those suggested Inter-Site Transport links, which Sites should be in each link?
    Thanks for your fast reply

    Hello,
    I think this example is your basic setup
    http://technet.microsoft.com/en-us/library/cc783068(v=ws.10).aspx except you have 2 sites with RODC. Keep in mind that RODCs use an RWDC to replicate from so there is not a need to have connectivity between the RODC sites.
    Best regards
    Meinolf Weber
    MVP, MCP, MCTS
    Microsoft MVP - Directory Services
    My Blog: http://msmvps.com/blogs/mweber/
    Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
    Please asper my understanding for your words and the link, it is good to have the following Inter-Site Transport links:
    between Site1 and Site2
    Between Site1 and Site3
    Between Site1 and Site 4
    It is not mandatory to link Site2 with Site3 and Site4
    Please correct if I misunderstand the things.

  • What is a Site Link Cost?

    I'm a Student trying to get MCITP. Please tell me when i am configuring Replication between sites, What is the site link cost means? What can i do from that? please tell me
    Regards,
    Ashane Deshapriya.
    Ashane Deshapriya ( MCP )

    Hi Ashane Deshapriya,
    The cost setting on a site link object determines the likelihood that replication occurs over a particular route between two site. Relication routes with the lowest cumulative cost are preferred. You can use this procedure to configure replication cost on
    the site link object in Active Directory Domain Services (AD DS). When you create or modify site links, use the site link object properties to configure the relative cost of using the site link.
    For your information, please refer to the following articles to get more help:
    Configure the Site Link Cost to Establish a Priority for Replication Routing
    Configure site link cost
    Regards,
    Lany Zhang

  • When I first open Firefox it is fine but if I open a second tab to search another site I get a white screen and have to continually click 'back', click the site link, white screen, back, click the link, white screen and so on.

    When I first open Firefox it is fine but if I open a second tab to search another site I get a white screen and have to continually click 'back', click the site link, white screen, back, click the link, white screen and so on.

    This can also be a problem with the files [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
    Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
    If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
    You will have to redo App Tabs and Tab Groups after deleting sessionstore.js.
    See:
    * http://kb.mozillazine.org/Session_Restore

  • My Site Links Not Working When Using Alternate Access Mapping

    I have a SharePoint Site Collection under my main
    Web Application: mywebapp:80.
    I had to extend this to an Intranet zone
    Web Application: mywebapp:101.
    I am able to open my Site Collection from either address. The authentication protocols for both are the same.
    When provisioning the User Profile Service and configuring
    My Site, the
    My Site Host Location must be supplied, in this case: http://mywebapp:80/personal/mysite
    I housed my My Site Host under the same Web Application as my
    Site Collection.
    When accessing My Site for any given user from mywebapp:80, all the links of user photos point to that same
    Web Application, which is expected.
    i.e. When on http://mywebapp:80/personal/mysite/person.aspx?accountname=person1 , all the links of photos of other users are http://mywebapp:80/personal/mysite/person.aspx?accountname=person2,
    etc.
    When accessing My Site for any given user from my extension, mywebapp:101, all the links of user photos still point to the old address.
    i.e. When on http://mywebapp:101/personal/mysite/person.aspx?accountname=person1 , all the links of photos of other users are still on http://mywebapp:80/personal/mysite/person.aspx?accountname=person2,
    etc.
    So I figured that the My Site Host configuration under the
    User Profile Service will just literally follow the initial URL specified. That said, I ask:
    1.) Is there no way that the My Site links will be able to adjust depending on the URL I am accessing it from?
    2.) What are possible implementation alternatives for cases like this when I need to use
    My Site under 1
    Web Application and have to make it available on
    multiple host names?

    Hi Noel,
    perhaps this thread is similar with your question:
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/d3010532-ae20-4eda-8f58-359f77d17e1e/user-profile-pictures-pointing-to-old-mysitehost?forum=sharepointadminprevious
    any way, for your 2 questions,
    perhaps you can give us more details about the scenario?
    as i know,
    mysite able to adjust, but you may need to configure the the host of the mysite, for example:
    1. to the User Profile Service Application (UPA) and changed the MySite URL, few sites show the new URL and few show the old one.
    2. to Central Admin and found there may 2-UPAs created.
    3. changed the MySite settings on both the UPAs, created Managed Paths wherever necessary and then changed associations of all web applications to one of the main UPA
    for configuring the multiple host, you may check with your IIS, and add the bindings,
    http://forums.iis.net/t/1189870.aspx
    http://stackoverflow.com/questions/14232892/multiple-sites-under-the-same-hostname-possible
    Regards,
    Aries
    Microsoft Online Community Support
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Full site link code to override mobile redirect in Adobe Muse

    Hi - I've set up a desktop and mobile site in Muse.  I allow Muse to generate the code that automatically goes to either the desktop or mobile version depending on which type of device the user is using.
    On the mobile version I have a simple "welcome" page and a link that says "click to enter mobile site"
    I also want to have a link below that one that says "click to enter full site"  But when I make this link and you click on it, it doesn't go to the desktop version but loops back to the mobile version (because of the view code Muse creates).
    Is there a way for me to make the "full site" link code to "override" the Muse code to force the desktop version to display on the mobile device?
    Thanks for any assistance on this.

    This thread should be helpful - http://forums.adobe.com/message/5147694.
    Thanks,
    Vinayak

  • Sharepoint Sites link not creating in Hybrid Office installation on TS

    Hi all,
    Run into an issue where the 'Sharepoint Sites' link won't create in the user profile \ favourites when using the Connect to Office function from Libraries.
    This is an on premise Sharepoint 2013 installation. Users connect to different Terminal Servers to access Office 2010 applications.
    Issue only affects new users.
    What I've found is if the new user is logged into a Terminal Server that has any Office 2013 applications installed on it. (In this case Sharepoint Designer 2013 or Project 2013)
    The user regkey HKCU\Software\AppDataLow\Microsoft\Office\15.0\Common\Portal gets created. Subsequently clicking Connect to Office seems to fail. I suspect this is because it knows the Office installation is only 2010 & tries to create the Publishing
    time stamp key in HKCU\Software\AppDataLow\Microsoft\Office\14.0\Common\Portal but this path does not exist.
    Logging the user into a Terminal Server that only has Office 2010 installed generates the correct Regkeys & the Sharepoint Sites link creates successfully in the user profile.
    Has anyone else seen this or know of a fix to get around the Office2013 being used as the default regkey path?
    Cheers

    Hi all,
    Run into an issue where the 'Sharepoint Sites' link won't create in the user profile \ favourites when using the Connect to Office function from Libraries.
    This is an on premise Sharepoint 2013 installation. Users connect to different Terminal Servers to access Office 2010 applications.
    Issue only affects new users.
    What I've found is if the new user is logged into a Terminal Server that has any Office 2013 applications installed on it. (In this case Sharepoint Designer 2013 or Project 2013)
    The user regkey HKCU\Software\AppDataLow\Microsoft\Office\15.0\Common\Portal gets created. Subsequently clicking Connect to Office seems to fail. I suspect this is because it knows the Office installation is only 2010 & tries to create the Publishing
    time stamp key in HKCU\Software\AppDataLow\Microsoft\Office\14.0\Common\Portal but this path does not exist.
    Logging the user into a Terminal Server that only has Office 2010 installed generates the correct Regkeys & the Sharepoint Sites link creates successfully in the user profile.
    Has anyone else seen this or know of a fix to get around the Office2013 being used as the default regkey path?
    Cheers

  • Need script to automate creation of AD sites,subnets and site links

    Hello,
    I have a requirement to create hundreds of sites and thousands of subnets in AD and also site links. I have an excel file with the details. 
    Can somebody help me with a vbscript/powershell script to automate this and create all the AD sites, subnets and site links
    Any help will be highly appreciated.
    BR,

    Hi AD-learner,
    As Santhosh said, you can get the scripts from the Script Center.
    I have made a quick search for you on the scripts for importing AD sites, subnets and site links.
    Checkout the below link on the powershell scripts to import, 
    AD Sites from a CSV file
    AD Subnets from a CSV file
    AD Site links from a CSV file
    Regards,
    Gopi
    www.jijitechnologies.com

  • In iweb I want my first(Home) page to have the Home link and an Enter site Link only.  On the enter site page (second Home Page) is where all my links appear at the top.  Can I do that?

    In iweb I want my first(Home) page to have the Home link and an Enter site Link only.  On the enter site page (second Home Page) is where all my links appear at the top.  Can I do that?

    Not easy...
    Not really?  Just uncheck the second checkbox for the first page and the nav bar is gone.

  • Inter-site replication and KCC, when migrating from 2008 SP1 to 2012 R2

    Hello,
    We have a very simple AD infrastructure, two sites.  I have built out a 2012 R2 server, extended the AD schema and promoted it to a domain controller.  Reviewing the existing AD replication topology, we currently have a 2008 SP1 server as a DC
    designated as the source/destination for inter-site replication, which appears to have been decided by KCC.
    I will be decomming this 2008 SP1 server, having migrated off the FSMO roles to a few other DCs.
    Will KCC automatically know to adjust the replication topology when the 2008 SP1 DC is offline?  Should I demote it after migrating off the FSMO roles?
    Thanks,
    Matt

    Hi,
    Thanks for your post.
    By default, the KCC reviews and makes modifications to the Active Directory replication topology every 15 minutes to ensure propagation of data, either directly or transitively, by creating and deleting connection objects as needed. The KCC recognizes
    changes that occur in the environment and ensures that domain controllers are not orphaned in the replication topology.
    For more detail information, you could refer to:
    http://technet.microsoft.com/en-us/library/cc961781.aspx
    For the migration, you could transfer the Flexible Single Master Operations (FSMO) Role and remove the Windows 2008 R2 domain controller, please refer to:
    Step-By-Step: Active Directory Migration from Windows Server 2008 R2 to Windows Server 2012 R2
    http://blogs.technet.com/b/canitpro/archive/2014/05/28/step-by-step-active-directory-migration-from-windows-server-2008-r2-to-windows-server-2012.aspx
    Regards.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Maybe you are looking for