Interactive Demand Planning - Short Dump.
Hello All,
We are using version SCM5.0. IDES for proto type.
I get short dump as soon as i execute the transaction SAPAPO/SDP94.
with the following message
"Run-time error "RAISE_EXCEPTION"
I have assigned the planning book to the user. And the planning area is active(time series object)
Regards
Samson
Hello Srinivas/Harish,
I agree with both of you, this is typical GUI issue.
We are on 6.4 frontend with pack level 8.
Dump is excatly in
Method: GET_FONT_INFOS.
Program:CL_GUI_RESOURCES==============CP
I have tried in different system and with diffrent font size. Our unicode is active.
Still I'm getting dump.
Regards
Samson
Similar Messages
-
Error Message When Opening Interactive Demand Planning
Hello Experts,
I have one user who is receiving the following error message when trying to open Interactive Demand Planning Workbook. Only one user is experiencing this issue. Has anyone run into this before?
GP: Graphics product not available in this system; see long text
Message no. APPLG225
Diagnosis
The required graphics product is not available on the current platform. It is either not permitted, or it does not work properly.
The application does not have a fallback strategy.
Procedure
Application/Specialists
Contact your developers to see if a fallback strategy can be implemented.
Development
Check the call method of the graphics proxy. If the graphics product is not mandatory (parameter FORCE_PROD), then the graphics proxy can select a different graphics product that is available on this platform.Dear Adam,
The prerequisite for graphics in planning folders is the SAP Internet Graphics Server. The connection between the SAP Internet Graphics Server and the system in which you operate BPS must take place using an RFC destination of the type TCP/IP with the predefined name IGS_DEST_POFO.
Please make sure that your settings are correct and check the online help at: http://help.sap.com/saphelp_sem320bw/helpdata/en/05/
242537cedf2056e10000009b38f936/frameset.htm
Planning Folder
> Editing a Planning Folder: Details
>Planning Folder: Portfolio Graphic"
Please have a look at the following notes as well that helped to solve problems with the IGS. 454042 IGS: Installing and Configuring the IGS
676532 Dumps in transactions with splitter containers
I hope this helps.
Regards,
Tibor -
Changing the Chart Title in Graphic View in Interactive demand Planning
Hi All,
Is it possible to change the Chart title in Graphic View in interactive demand planning screen.
When we go to interactive planning after loading the data we go to Univariate forecast then switch to graphic, the chart title shows the selection at which the planning is done. For eg; If I plan at die level and i select a particular sap material, the chart title displays Die value and not the material value.
Is it possible to change the chart title such that it displays all the selections made in selection winodw, like in the above case both Die value as well as SAP Material Number.
Thanks and Regards,
DianaDear Diana,
unfortunately this is not possible.
The chart title is build from the planning book name + the Show characteristic in the shuffler (+ available nav. attributes of the Show char).
The functionality you requested doesn't exist in standard.
Regards,
Tibor -
How to add new product in interactive demand planning(IDP)
Hi gurus,
How to add new product in interactive demand planning(IDP), can you suggest me, when i click data view in IDP, it will show new product.
Regards
babuHi Raj,
Since the New Product is already in MPOS what you need to do in your Data view is to go to "Selection Window" on the left side of the screen(make sure you dont click on the existing selection ids). Select Product at the top, the planning version will come in the next row and then you again select the Product as charateristic and enter the New product name against the Product(Characteristic) and then save it in case you want it to use for your future references. When you will double cilck on the newly made selection id you will be able to see you product with the keyfigure details in right side.
Please let me know if it works.
Thanks,
Anand. -
Interactive demand planning -statistical forecasting error
Hell APO DP experts,
We are implementing CBF functionality in demand planning. In /SAPAPO/SDP94 - Interactive Demand Planning, when we try to run forecast we are getting a message:
Not possible to carry out the forecast - no historical data
Message no. /SAPAPO/MA502
although the historical data is there.
Any info on this?
Regards
PanditHi,
If you are working on SAP APO 4.0/4.1,
Check OSS Note 790517 - No error message "No historical data available".
Implement the corrections as mentioned in the message.
Warm regards,
Prem -
Dear All,
Activated Execution services at activity level in Easy cost planning.
Created Project with Activities and planned cost using Easy cost Planning.
While Posting actual using Easy cost Planning system is going to short Dump.
Please find the attached Screen Shot for your reference.
Regards,
Avinash KusamCheck this note and see if it helps you,
20434 - SAPSQL_ARRAY_INSERT_DUPREC at ONR00 -
Hi All,
I am trying to use aggregates in DP but I am facing the following error messages when I try to load data from the aggregates in interactive demand planning:
There are no plannable characteristic combinations
Error reading data - Planning book cannot be processed further
Using /sapapo/ts_pstru_tool and Technical Info. for Aggregate, I noticed that number of entries for the aggregate in 0. I tried to fill it again but nothing happened. I have already tried to deactivate and reactivate, but it did not help.
I also tried to activate and fill the aggregate using the cube generated in BW. In the log I have the following error:
SQL Error: Operand data type nvarchar is invalid for sum oper ator.
SQL Error: 8117
Has anyone faced this problem before and knows how to solve it?
Thanks in advance.
Emiliethe reason for the error and the repair is as in the section below.... and looks like it says there is no solution
i suppose you have tried to activate it again... and have not got any result
you might as well try to inactivate it and recreate the aggregates
then go and refill the cvcs with a fresh create CVC using /SAPAPO/MC62 variant
(be careful - deactivating the MPOS itself will cause data loss)
if you create your CVCs in the MPOS after your aggregates are activated it would automatically aggregate in the right level
Use
The system checks whether the relevant characteristic value combinations
in the master planning object structure exist for the combinations in
the aggregate(s). If this is not the case, that is there are
combinations in the aggregate for which there are no corresponding
combinations in the master planning object structure, the data in the
planning area(s) is inconsistent and error messages are issued, in
interactive planning for instance.
In the results log the system displays the characteristic value
combinations in the aggregate that do not have corresponding
combinations in the master planning object structure.
The aggregate has not been filled correctly.
Repair
It is not possible to repair this type of error automatically since the
superfluous combinations in the aggregate cannot just be deleted.
Reactivate the aggregate. This only leads to a loss of data if values
have been fixed on the aggregate. -
Hi,
I am new to demand planning. Could anyone tell me how to use the transaction MC94 and explain about the demand planning procedure.
Thanks in advance
Aparna
Edited by: Aparna RJ on Aug 19, 2008 1:02 PMHi Aparna,
I guess its SDP94. This t code /n/sapapo/sdp94 is for Interactive Demand Planning where all of seletions ids assigned for users in the whole business process and will be convininant for visibility of relavant demand with specified bucket.
I couldnt't here MC94. Any way Regarding MC94 in which scenario u are going to use plz give reply.
And regarding Demand Planning Process Plz go through the following link. And refer each and every thing inside.
http://help.sap.com/saphelp_scm2007/helpdata/en/8f/9d6937089c2556e10000009b38f889/frameset.htm
Thanx
Subhan -
Zci type ADOBE Interactive Form in ABAP Webdynpro short dump
Adobe Reader version 8.1.2
Life Cycle Designer version 7.1.4270.1.421766
ECC 6.0 patch 13
When I ran the 'FP_PDF_TEST_00' , it shows
Version Information: 710.20061024154505.342190
In my ABAP Webdynpro app., it has 3 inputfields.
In the Form layout, I changed the form layout type to 'ZCI' for interactive form, and Insert the WebDynpro Script.
And in the ABAP Webdynpro view layput designer, I enabled the pdf form element.
All objects compiled without any problem.
During the runtime, it got the following short dump:
21 METHOD CX_WD_GENERAL=================CP CX_WD_GENERAL=================CM003 5
CX_WD_GENERAL=>RAISE
20 METHOD CL_WD_ADOBE_SERVICES==========CP CL_WD_ADOBE_SERVICES==========CM008 193
CL_WD_ADOBE_SERVICES=>CREATE_PDF
19 METHOD /1WDA/LADOBE==================CP /1WDA/LADOBE==================CCIMP 1955
CL_INTERACTIVE_FORM_ZCI=>IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT
Our BASIS sent me the ADS trace:
SAP Interactive Forms by Adobe
Render Error Report
'pdf' Log Entries
restoreState is not a valid attribute of subform, Attribute not loaded. Line 5.
Invalid node type: dataGroup
The fault occurred on line 0.
The SOM expression '$record.BAPIBNAME' for the dataRef specified on field 'BAPIBNAME', resolved to an incompatible node type of 'dataGroup'.
Any comment or advise?Hi,
As far as i know when you use Adobe forms in a WD4A application, language is your "web" connection language.
You can have a look at standard class CL_WD_ADOBE_SERVICE, it's used when generating an adobe forms from WD4A. , more particulary look at method DETERMINE_DOCPARAMS.
regards -
21st Interactive list goes to short dump?
Hi,
Why does the 21 st Interactive list goes to short dump?
I know this is due to memory is it correct?
If it is mentioned in the kernal, then where can i find this info?
aRsHi,
Please see this test program
report.
uline.
set user-command'PF08'.
at pf8.uline.
set user-command'PF08'
It is giving short dump of "No further selection list possible"
I need to avoid short dump in this scenario. For avoid this i am writing a C call
if sy-lsind > 21 then resetting to 0.
aRs
(Due to this same kind of logic applied to lot of programs i don't want to change all) -
Not able to Upload data in Demand Planning data view
Hi
I am trying to upload a csv file in to Demand planning interactive planning through " Upload Data " functionality
First I exported data from interactive planning , updated some data in file and again trying to upload same file.
I am getting following error
File cannot be uploaded
Message no. /SAPAPO/SDP_UPLOAD009
Diagnosis
File has no technical information or incorrect technical information.
Procedure
Save the file again locally. Make sure that the file has the technical information.
Could u please suggest what needs to be done
Thanks and regards,
Nitin LavheHello,
For using the upload data functionality from interactive planning grid, you need to first download the data. While downloading the data, please check the check box for "Prepare the file for upload at later time", and then select the option of putting the technical setting into the file or into the system. Either way is okay. Then try uploading the same file.
This should solve your problem.
Thank you.
Regards,
Jacky Jain.
SAP APO Architect. -
Short dump in report CLEAN_REQREQ_UP
Hi,
I'm in classic scenario with SRM 5.5 . I've created a PO in backend and when I run this report, a short dump appears
Have anybody any idea?
Thanks in advance
Best Regardshi dinesh
my business steps are :
I'm in srm server 5.5. and sap ERP 6.0
I'm in classic scenario with plan driven procurement.
I replicate my PR from PS to SRM, create a bid invitation. Receive bids and when I accept one of them I create a PO in backend.
These steps work fine, but I can't run this report.
The dump is as follows:
- " UNCAUGHT_EXCEPTION"
- "The exception 'CX_BBP_PD_ABORT' was raised, but it was not caught anywhere along the call hierarchy"
- Since exceptions represent error situations and this error was not adequately responded to, the running ABAP program 'SAPLBBP_PDH' has to be terminated.
Do you need anything more?
Thanks in advance
Best Regards -
Short Dump while scrolling on the ALV (GETWA_NOT_ASSIGNED)
Hi All,
I have an interactive ALV list, After the user double click on the list line item,
the list control goes to top of the list.
When i want to scroll for further interaction, I am getting a Short dump GETWA_NOT_ASSIGNED.
Please advice
SolomonHi
Please find the ALV code
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = hf_repid
i_callback_user_command = 'USER_COMMAND'
i_callback_pf_status_set = 'SET_PF_STATUS'
it_fieldcat = int_fieldcat[]
it_sort = int_sort[]
is_layout = fs_layout
i_save = 'A'
is_variant = alv_variant
it_events = int_events[]
TABLES
t_outtab = i_bsid
EXCEPTIONS
program_error = 1
OTHERS = 2.
ENDFORM. " write_alv_report
FORM user_command *
FORM user_command USING ucomm LIKE sy-ucomm
selfield TYPE slis_selfield.
IF selfield-tabindex GE 1.
check sy-ucomm <> 'POST'.
READ TABLE i_bsid into i_bsid_alv INDEX selfield-tabindex.
CASE I_BSID-CHECK.
WHEN SPACE.
I_BSID-CHECK = 'X'.
WHEN OTHERS.
I_BSID-CHECK = ''.
ENDCASE.
MODIFY I_BSID TRANSPORTING CHECK WHERE matchkey = i_bsid_alv-matchkey.
ENDIF.
selfield-refresh = 'X'.
*CLEAR selfield.
ENDFORM. "user_command
FORM SET_PF_STATUS *
FORM set_pf_status USING extab TYPE slis_t_extab.
data : lv_answer(1) TYPE c.
SET PF-STATUS 'S200'.
IF SY-UCOMM = 'POST'.
I_BSID_ALV1[] = I_BSID[].
DELETE I_BSID_ALV1 WHERE CHECK = SPACE.
CLEAR I_BSID[].
I_BSID[] = I_BSID_ALV1[].
ENDIF.
2. when I double click on the ALV list line item, after the line is selected the control goes to the top of the list.
I have already setup the ALV menu bar. -
Short dump while changing the end date of infotype 0167 through PA30
Hi all,
I am getting short dump while changing the end date of infotype 0167(Health Plans) through Tcode PA30.
dump descript is as below
An exception occurred that was not caught.
Runtime Errors UNCAUGHT_EXCEPTION
Except. CX_HRPA_VIOLATED_POSTCOND
Date and Time 11.03.2010 07:06:26
What happened?
The exception 'CX_HRPA_VIOLATED_POSTCONDITION' was raised, but it was not
caught anywhere along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CL_HRPA_SAPUP50R_ADAPTER======CP' has to be
terminated.
thanks
shahidSearch OSS Notes for that.
-
ECC 6.0 bar chart short dump
We are starting an upgrade from 4.7(non-Unicode) to ECC 6.0(Unicode), using SAPgui for Windows (version 7.10). In our 4.7 systems, the graphical bar chart on the Project Planning Board (txn CJ2C) works as expected. However, in the 6.0 development system, before displaying the gantt chart, the system short dumps with CREATE_ERROR.
I have searched the forums and looked through OSS notes and was unable to find anything that described the problem or was pertinent to our release. I have debugged through the transaction and am finding that the short dump occurs in method cl_gui_barchart=>constructor around the following code:
at line 83 if the system is unicode (which it is), the code calls method cl_gui_frontend_services=>check_gui_support, exporting 'ganttcontrol'/'usedataasstream' and expecting a result in variable l_guisupp_data_as_string. When it returns from the check_gui_support method, l_guisupp_data_as_string is blank, so the next "if" statement raises an error that is not handled:
if l_guisupp_data_as_string = abap_true.
.....code not executed because the variable = abap_false.
else.
.....raise create_error. <<<<< this is where the dump occurs.
endif.
Note that in the debugger, if I force l_guisupp_data_as_string to be = abap_true, the gantt chart/barchart displays as expected. (gotta love the debugger) But since it is standard SAP code I would prefer to resolve the problem without a modification and am hoping someone out there can point me in the right direction.
This short dump occurs with gui versions 710 and lower. (I personally am using sapgui version 710, patch level 7.) Has anyone had problems like this with the graphical elements in SAP or does anyone have a suggestion as to why the gui is not displaying the barchart correctly in our unicode system?
Sorry for the very long message, but thanks in advance for the help!
Amanda Salt
Edited by: Amanda Salt on Jun 17, 2008 11:14 PMWe are starting an upgrade from 4.7(non-Unicode) to ECC 6.0(Unicode), using SAPgui for Windows (version 7.10). In our 4.7 systems, the graphical bar chart on the Project Planning Board (txn CJ2C) works as expected. However, in the 6.0 development system, before displaying the gantt chart, the system short dumps with CREATE_ERROR.
I have searched the forums and looked through OSS notes and was unable to find anything that described the problem or was pertinent to our release. I have debugged through the transaction and am finding that the short dump occurs in method cl_gui_barchart=>constructor around the following code:
at line 83 if the system is unicode (which it is), the code calls method cl_gui_frontend_services=>check_gui_support, exporting 'ganttcontrol'/'usedataasstream' and expecting a result in variable l_guisupp_data_as_string. When it returns from the check_gui_support method, l_guisupp_data_as_string is blank, so the next "if" statement raises an error that is not handled:
if l_guisupp_data_as_string = abap_true.
.....code not executed because the variable = abap_false.
else.
.....raise create_error. <<<<< this is where the dump occurs.
endif.
Note that in the debugger, if I force l_guisupp_data_as_string to be = abap_true, the gantt chart/barchart displays as expected. (gotta love the debugger) But since it is standard SAP code I would prefer to resolve the problem without a modification and am hoping someone out there can point me in the right direction.
This short dump occurs with gui versions 710 and lower. (I personally am using sapgui version 710, patch level 7.) Has anyone had problems like this with the graphical elements in SAP or does anyone have a suggestion as to why the gui is not displaying the barchart correctly in our unicode system?
Sorry for the very long message, but thanks in advance for the help!
Amanda Salt
Edited by: Amanda Salt on Jun 17, 2008 11:14 PM
I just installed the latest patch on the SAPgui, so I am now running:
Release: 710 Final Release
File Version: 7100.2.8.1039
Build: 983952
Patch Level: 8
But I am still getting the short dump. I have done extensive searches of SAP Help, OSS notes, and this and other forums (even just looking up the problem on "google") but can't seem to find anything that applies to this scenario. I'm not very familiar with the methods in cl_gui_frontend_services, so if anyone can give me a pointer of where else I can look, I would greatly appreciate it!
I also have edited the Subject line to be more informative about the problem
Maybe you are looking for
-
I just recently installed Illustrator on an Windows 8 machine and when I try to launch it 32 or 64bit it crashes right after the splash screen.
-
Is there a specific time of day that the BTO iMacs become available for pickup?
As I am sure many people can relate to, I find myself hitting the refresh screen on my Apple order page awaiting the arrive of a built-to-order 27" iMac (3.4 GHz/ 32GB memory/ 3TB fusion/ 680MX graphics). Question for people with an inside scoop....
-
HT201272 How do I retrieve downloads that I purchased that no longer show up on my phone?
How do i retrieve downloads that I purchased that no longer show up on my Iphone>
-
Having some problems getting into my macbook.
Well my macbook was working fine and i let my uncle watch some videos on it and then he shut it down. Now when i go to turn it on it takes forever on the loading screen with the apple on it and after that it goes to the blue screen and just freezes t
-
Hello all, I am posting the vender invoice from MIRO the tds amount is not reflecting in the REPORT jJ1INMIS but when i post the invoice fro fb60 the report shows the TDS values what could be the reason. Difference of doc type only. Suggest