Interactive form on Zebra Printer

I am having an issue printing a custom paper type to a zebra printer.
I'm trying to print a 3.5 x 3.5 inch label onto a zebra 6mplus (zpl 1 and zpl2 supported, 203dpi) printer. I have done the following:
1. In adobe lifecycle designer 9.0, I have modified the designer.xdc file to have the following entry:
                  <medium stock="3.5x3.5" short="252pt" long="252pt"/>
2. Defined a form using the new paper type 3.5x3.5
3. In SAP, copied the standard zpl203.xdc file, renamed it to z_zpl203.xdc and used program RSPO0022 to link the new file
     to a new device type ZAZPL203. The modified xdc file has the following entry:
                        
               <medium stock="3.5x3.5" short="252pt" long="252pt" imagingBBox="0pt,1pt,252pt,251pt"/>
               
4. In spad I then changed our zebra printer to use the device type ZAZPL203.
When I print, either by testing the form or by using a program, the output appears to come in standard letter (8.5x11) format. Instead of 1 label, I'm getting a blank label, my desired content slightly shifted and then another blank label. If I look at the trace file and I can see that my xdc file is being considered.
Embedding file/stream: z_zpl203.xdc using ID: xdc0 MimeType: Description: Document Services XDC into PDF: /tmp/adobewa_CH9_96403050/DM6513754473347549726.dir/DM-6611375051718293888.tmp
No matter what I do, I can't seem to get the form to come in the format that I specify. Can anyone using interactive forms to Zebra printers offer any advice here?
Thanks,
Joe
Edited by: Joseph Sciacca on Nov 10, 2011 4:46 PM

Closed. The printer media was pending calibration.

Similar Messages

UPS Maxicode in Adobe Forms - non-zebra printer

Hey guys,
I have a problem regarding printing an UPS Maxicode on a regular printer (HP Laserjet P3015) in Adobe Forms: It just won't print.
I'm using the "UPS Maxicode" object in the "barcode" library (LCD ES3, Version 10.4). After some research, I found this guide:
UPS maxicode on SAP Adobe forms - Contributor Corner - SCN Wiki
The scripting described there works great for printing the UPS Maxicode on a zebra printer - but the non-zebra printer scripting doesn't work for me.
There isn't much to find about this on google, so I hope you guys can help me. I experimented with printers, device types (i.e. PDF1) and such, but the result remains the same. What else can I try? Am I missing something?
Thanks for your time / help,
Chris

You can find some information about it in this document:
[http://www.tec-it.com/download/PDF/TBarCode6_SAPwin_Manual_EN.pdf]
See chapter 12, see also chapters: 6, 7, 8 and 11.
good luck

Interactive forms by email - PRINTING SCENARIO - From ERP output

Hi,
We have been using interactive forms for printing scenarios for a while and it works fine.
From a sales order we produce an output configured to use the interactive forms by adobe.
Now, we'd like to use the EXTERNAL SEND (5) and send by email. While we've done this in the past with sapscript and smartforms, we have no reference on what is the best way to do this. There is a sample program BCS_EXAMPLE_6 that uses BCS class to achive this.
Is it the recommended way to do it? If not, please give me the alternative.
Leonardo De Araujo

Hey Hi Leo, I remember to have seen that at TechEd last year by Jeff Gebo, go in your virtual teched subscription and check for course CD205,
also check this link
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0bba346-cb84-2910-2aa9-ba1f8a1c8617|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0bba346-cb84-2910-2aa9-ba1f8a1c8617]
Alex

Can ABAP Webdynpro use interactive form or just print only

I saw a diagram in the ADS configuration Guide for SP10 what shows that the ABAP side of the configuration is only for print forms. Now my question is: can ABAP Webdynpro include an interactive Adobe form in the view? Has anyone done it before? It seems that it is only for Java Webdynpro that the interactive part is working.
If you have done one, can you share some information?
Thanks

Hi Jeff,
Sure, Web Dynpro ABAP can also embed Interactive Forms.
Help is available on help.sap.com: http://help.sap.com/saphelp_nw04s/helpdata/en/aa/940ee5331b4b8fa0a6cb6714dc5db4/frameset.htm
There are also some nice videos of this following https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/7c3bc67e-0c01-0010-dbb3-908315896909?rid=/webcontent/uuid/24b9e126-0b01-0010-e098-f46384fad9f3">this [original link is broken] [original link is broken].
Cheers,
Francois

Print programs for (print) interactive forms

Hello,
I am looking for an (any) interactive form and the print-program belonging to this form.
It can be any form from any moudule, as i only need it for testing purposes.
Thank you!

Hi,
My requirement to migrate puchase order smartformto Adobe interactive form.
I have mgrated my purchase order smartform to Adobe interactive form,
activated form and interface.
Question: How do i trigger or my adobe interactive form purchase order in R/3.
I want to trigger the form from me22n -> print privew..
I have configured in NACE (Output type customization) with same samrtform print program with adobe form and Type as PDF. But the adobe form is not trigering at all.. Can any know how do i trigger adobe form from ME22n.
Is there any special print program for this please let me know..
thx

To print image in Non interactive form

I have a requirement where image file is attached to QM02 transaction, now i want to print the attached image on QM02 print output. I am planning to use Non interactive form method to print the form output.
Can anyone pls guide me how to insert/print image file which is attached at the transaction level.

Otto:
I followed the steps you have described in one of your earlier reply but I am unable to see the image on the non-interactive ADOBE form.
Here is what I did.
1) In the "Code Initialization" section of the form, I coded to get the SE78 stored image in to XSTRING field (by calling method cl_ssf_xsf_utilities=>get_bds_graphic_as_bmp)
2) I created the image field and bound it to the XSTRING field derived in step 1. And I check marked "embed image" in layout of the image field.
I also followed some other threads on this forum and tried to create a graphic node with a global field of mime type "BMP" and bound my XSTRING data onto it but to no avail.
Any ideas?
Thanks.
Jitendra Mehta

Printing trhough SAPWIN with ZEBRA printer

Hi Gurus
I need your help please since I already spent a lot of time to find a solution and not found any.
I use Smartform to produce labels on ZEBRA printer (output Device Z201, Device Type ZLZEB2:Zebra label printer 203dpi). All fields on my form use HELVE as font. I print my form through Z201 and it works fine.
My requirement now is to print the form to ZEBRA printer locally using SAPWIN (Rel 4.x/SAPlpd 4.09 + ONL:Y) as device type. To do this I created a new output device LCLB, copied the device type SAPWIN into ZWIN and attached to output device LCLB
The problem is when I print the form using LCLB, all my fields with HELV font are printed with COURRIER font.
I went in transaction SE73 and display printer fonts associated with ZWIN and it seems that all fonts (COURCYR, COURIER, OUR_I7, HELVCYR, HELVE, HELV_I7, OCRA, OCRB, TIMECYR, TIMES, TIME_I7) are defined there. Do I miss something? Do I have to redefine the print control in ZWIN with control characters corresponding with ZEBRA printer?
Any feedback would be appreciated
Thank you

Hi Valter,
did you figured it out why do you had a problem with that printer?
tks
best regards,
Pedro

Printing sapscript label using zebra printer

Hi,
Can anybody please help me regarding "printing sapscript label using zebra printer"?
i hav set the following print default settings in the transaction mb90:
output device :
NO01
device type: YZZX_ZEB
but when i try to print ,i am getting error message stating that "the respective sapscript form is not active ".
i hav also attached my print program for ur easy reference.
====================================================================*
FORM open_form_slv.
*' Description:
*' Add information for the SAP spooler
*' Change the name of the standard customized form for Zebra print
*' Last Change Vers Programmer   Reason
*1
DATA: BEGIN OF print_infos.
          INCLUDE STRUCTURE itcpo.
DATA: END OF print_infos.
DATA: form_name(16) TYPE c, char1(1) TYPE c, ind_beg TYPE i.
PERFORM itcpo_fuellen.
MOVE-CORRESPONDING itcpo TO print_infos.
WRITE sy-datum USING EDIT MASK '__.__.____'
                                           TO print_infos-tdcovtitle+1.
WRITE sy-uzeit USING EDIT MASK '__:__:__'
                                          TO print_infos-tdcovtitle+12.
CONCATENATE itcpo-tddest sy-uname ' PO'(001) ekpo-ebeln ' Doc.No'(002)
                                       mseg-mblnr print_infos-tdcovtitle
                          INTO print_infos-tdcovtitle SEPARATED BY space.
form name from the table YZZM_GR_LABEL
IF NOT g_fonam IS INITIAL.
    tnapr-fonam = g_fonam.
ENDIF.
if the used printer is a Zebra label printer, then the customized
layout set name ???_???_XXX will be changed to ???_???_ZP
SELECT SINGLE * FROM tsp03d WHERE padest = nast-ldest.
IF tsp03d-patype = 'YZZX_ZEB'.
    ind_beg := 15.
    WHILE ind_beg > -1.
      char1 := tnapr-fonam+ind_beg.     " substr(tnapr-fonam,ind_beg,1)
      IF char1 = '_'.
        form_name := tnapr-fonam(ind_beg).
        CONCATENATE form_name '_ZP' INTO tnapr-fonam.
        EXIT.
      ENDIF.
      ind_beg := ind_beg - 1.
    ENDWHILE.
ENDIF.
CALL FUNCTION 'OPEN_FORM'
    EXPORTING
      device   = 'PRINTER'
      language = language
      OPTIONS = print_infos
      form     = tnapr-fonam
      dialog   = ' '.
x_open := x.
IF mseg-weanz = 0. mseg-weanz = 1. ENDIF.
IF syst-tcode <> 'MB90' AND NOT g_flag_popup IS INITIAL.
check for requirement of printing label and ask for gr-quantities (popup)
    SELECT SINGLE * FROM yzzm_gr_quantity WHERE ebeln = mseg-ebeln.
    CLEAR yzzm_gr_quantity-no_popup.
ELSE.
and ask not for gr-quantities
    IF syst-tcode = 'MB90'.
      yzzm_gr_quantity-erfmg := mseg-menge.
    ELSE.
      yzzm_gr_quantity-erfmg := mseg-menge / mseg-weanz.
    ENDIF.
    yzzm_gr_quantity-no_popup := x.
ENDIF.
determination inspection lot number
CLEAR qals-prueflos.
SELECT SINGLE * FROM qals WHERE mblnr = mseg-mblnr
                       AND zeile = mseg-zeile
                       AND mjahr = mseg-mjahr.
determination vendor batch
CLEAR mch1-licha.
SELECT SINGLE * FROM mch1 INTO mch1 WHERE matnr = mseg-matnr
                                        AND charg = mseg-charg.
ENDFORM.                    "open_form_label
=================================================================== *
FORM we01_print_slv.
*' Description:
*' print out of hazardous symbol
*' controls the Zebra printer
*' Last Change Vers Programmer   Reason
*****26.09.2007 Starts
DATA: l_objky TYPE nast-objky,"Object key
        l_vstat TYPE nast-vstat. "Processing status of message
*****26.09.2007 Starts
TABLES: mgef, t300.
FIELD-SYMBOLS: .
DATA: aux_index LIKE sy-index.
DATA: count_haz_sym, position TYPE n, zw TYPE p DECIMALS 1.
DATA: aux_value(5) TYPE c.
DATA: txt(10) TYPE c, pos(5) TYPE c.
t001w-werks = r_werks.
t001w-name1 = r_name1.
PERFORM read_address.
*2
SELECT SINGLE * FROM ekpo WHERE ebeln = mseg-ebeln
                              AND ebelp = mseg-ebelp.
CLEAR mara-stoff.
SELECT SINGLE stoff INTO mara-stoff FROM mara WHERE matnr = mseg-matnr.
IF NOT mara-stoff IS INITIAL.
    CLEAR t300.
    SELECT SINGLE * FROM t300 WHERE lgnum = mseg-lgnum.
    IF NOT sy-subrc IS INITIAL.
for plants without warehouses try to use the country code
      CASE mseg-werks.
        WHEN 'BUP'.
          t300-regkz := 'US '.
      ENDCASE.
    ENDIF.
    CLEAR mgef.
    SELECT SINGLE * FROM mgef WHERE stoff = mara-stoff
                              AND   regkz = t300-regkz.
ENDIF.
in case of more then one label, use for each a new output window
(not only for the first)
IF g_count > 1.
    CALL FUNCTION 'CONTROL_FORM'
      EXPORTING
        command = 'NEW-WINDOW'.
ENDIF.
Ausgabe Gefahrstoffsysmbole        Neustadt, V.Hilgert 14.07.98
*For output type YNL7, the hazardous warning symbol has to be printed at the bottom of the label.So label is called before that.
IF tnapr-kschl = 'YNL7'.
    CALL FUNCTION 'WRITE_FORM'
      EXPORTING
        element = 'LABEL'.
ENDIF.
count_haz_sym = 0. position = 0.
WHILE count_haz_sym = 'XN'.
For output type YNL7, the width of the standard text is small.
      IF tnapr-kschl = 'YNL7'.
        zw = position * '0.2' + '0.1'. pos = zw.
      ELSE.
        zw = position * '1.3' + '0.1'. pos = zw.
      ENDIF.
      IF tsp03d-patype = 'YZZX_ZEB'. " device type for ZEBRA label priter
        aux_value := count_haz_sym.
      ELSE.
        aux_value := pos.              " HP/Kyocera or other laser printer
      ENDIF.
      CALL FUNCTION 'TEXT_SYMBOL_SETVALUE'
        EXPORTING
          name   = '&XPOS&'
          value = aux_value
        EXCEPTIONS
          OTHERS = 1.
      CALL FUNCTION 'WRITE_FORM'
        EXPORTING
          element   =
          window    = 'MAIN'
        EXCEPTIONS
          element   = 1
          function = 2
          type      = 3
          unopened = 4
          unstarted = 5
          window    = 6
          OTHERS    = 7.
      IF sy-subrc = 0.
*Varying the position for YNL7
        IF tnapr-kschl = 'YNL7'.
          position = position + 2.
        ELSE.
          position = position + 1.
        ENDIF.
      ENDIF.
    ENDIF.
ENDWHILE.
IF NOT mseg-vfdat IS INITIAL.
    am07m-mhtxt = text-105.
ENDIF.
IF NOT am07m-mhdat IS INITIAL.
    am07m-mhztx = text-106.
ENDIF.
IF ekko-bsart = 'UB'.
    am07m-litxt = text-101.
    am07m-libzg = ekko-reswk.
ELSE.
    am07m-litxt = text-100.
    am07m-libzg = ekko-lifnr.
ENDIF.
belpos-mblnr = mkpf-mblnr.
belpos-zeile = mseg-zeile.
CONDENSE belpos NO-GAPS.
am07m-belpos = belpos.
IF t156-shkzg = h.
    am07m-hdlne = text-020.
ELSE.
    am07m-hdlne = text-010.
ENDIF.
Ausgabe der Etiketten mit den ind. Mengen
IF NOT g_flag_popup IS INITIAL.
    SELECT SINGLE * FROM yzzm_gr_quantity WHERE ebeln = mseg-ebeln
                                          AND   weanz = g_count.
ELSE.
* print the number of labels is handeled by the Zebra printer
IF tsp03d-patype = 'YZZX_ZEB'. " device type for Zebra label prts
g_lbls_tot := mseg-weanz - g_count + 1.
g_break_print := x.
ENDIF.
ENDIF.
mseg-erfmg := yzzm_gr_quantity-erfmg.*
********26.09.2007 Starts
CONCATENATE mseg-mblnr mseg-mjahr mseg-zeile INTO l_objky.
SELECT SINGLE vstat INTO l_vstat FROM nast WHERE kappl = 'ME' AND
objky = l_objky AND
kschl = 'YNL7'.
********26.09.2007 Ends
CALL FUNCTION 'TEXT_SYMBOL_SETVALUE'
EXPORTING
name = '&nummer&'
value = g_count.
IF tnapr-kschl <> 'YNL7'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'LABEL'.
else.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'BAR_CODE'
EXCEPTIONS
ELEMENT = 1
FUNCTION = 2
TYPE = 3
UNOPENED = 4
UNSTARTED = 5
WINDOW = 6
BAD_PAGEFORMAT_FOR_PRINT = 7
SPOOL_ERROR = 8
CODEPAGE = 9
OTHERS = 10.
IF sy-subrc <> 0. MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
     ENDIF.
ENDIF.
ENDFORM.                    "GR_label_print
*&      Form lesen
      text
     -->OBJKY      text
FORM lesen USING objky.
nast_key = objky.
CLEAR retco.
SELECT SINGLE * FROM mkpf WHERE mblnr = nast_key-mblnr
                            AND   mjahr = nast_key-mjahr.
SELECT SINGLE * FROM mseg WHERE mblnr = mkpf-mblnr
                            AND   zeile = nast_key-zeile
                            AND   mjahr = mkpf-mjahr.
IF sy-subrc NE 0.
    retco = sy-subrc.
    EXIT.
ENDIF.
PERFORM tab156_lesen.
xskkz = t156-rstyp.
PERFORM tab001w_lesen.
IF NOT mseg-evers IS INITIAL.         "Versandvorschriften lesen.
    PERFORM t027_lesen.
ENDIF.
PERFORM bestellung_lesen.
IF NOT ekpo-knttp IS INITIAL AND NOT
         ekpo-weunb IS INITIAL.
    PERFORM kontierung_lesen.           "für multikontierte Bestellungen
ENDIF.
IF NOT mseg-ematn IS INITIAL.
    PERFORM lesen_htn.
ELSE.                                                     "111277/PH
    CLEAR am07m-mfrpn.                                      "111277/PH
ENDIF.
IF mseg-matnr IS INITIAL.
    mseg-menge = mseg-bpmng.
    mseg-meins = mseg-bprme.
    PERFORM bestelltext_lesen.
    CLEAR mabdr.
ELSE.
    PERFORM material_lesen.
ENDIF.
PERFORM tab024_lesen.
PERFORM t064b_lesen.
PERFORM ladr_lesen.
ENDFORM.                    "lesen
Lesen für WE-Schein Fert.Auftrag -
FORM lesen_wf USING objky.
nast_key = objky.
CLEAR retco.
SELECT SINGLE * FROM mkpf WHERE mblnr = nast_key-mblnr
                            AND   mjahr = nast_key-mjahr.
SELECT SINGLE * FROM mseg WHERE mblnr = mkpf-mblnr
                            AND   zeile = nast_key-zeile
                            AND   mjahr = mkpf-mjahr.
IF sy-subrc NE 0.
    retco = sy-subrc.
    EXIT.
ENDIF.
PERFORM tab156_lesen.
xskkz = t156-rstyp.
PERFORM tab001w_lesen.
PERFORM auftrag_lesen.
IF NOT mseg-matnr IS INITIAL.
    PERFORM material_lesen.
ELSE.
    mseg-menge = mseg-erfmg.
    mseg-meins = mseg-erfme.
ENDIF.
PERFORM tab024d_lesen.
PERFORM t064b_lesen.
PERFORM ladr_lesen.
ENDFORM.                    "lesen_wf
Lesen für Warenausgang -
FORM lesen_wa USING objky.
nast_key = objky.
CLEAR retco.
SELECT SINGLE * FROM mkpf WHERE mblnr = nast_key-mblnr
                            AND   mjahr = nast_key-mjahr.
SELECT SINGLE * FROM mseg WHERE mblnr = mkpf-mblnr
                            AND   zeile = nast_key-zeile
                            AND   mjahr = mkpf-mjahr.
IF sy-subrc NE 0.
    retco = sy-subrc.
    EXIT.
ENDIF.
PERFORM tab156_lesen.
xskkz = t156-rstyp.
PERFORM tab001w_lesen.
IF NOT mseg-matnr IS INITIAL.
    PERFORM material_lesen.
ENDIF.
PERFORM ladr_lesen.
ENDFORM.                    "lesen_wa
Druck Vorbereiten -
FORM open_form.
PERFORM itcpo_fuellen.
CALL FUNCTION 'OPEN_FORM'
    EXPORTING
      device   = 'PRINTER'
      language = language
      OPTIONS = itcpo
      dialog   = ' '.
PERFORM lesen_t159p.
x_open = x.
ENDFORM.                    "open_form
Druck Vorbereiten Sammelscheine -
FORM open_form_sammel.
PERFORM lesen_t159p.
PERFORM itcpo_fuellen.
CALL FUNCTION 'OPEN_FORM'
    EXPORTING
      device   = 'PRINTER'
      language = language
      OPTIONS = itcpo
      form     = tnapr-fonam
      dialog   = ' '.
x_open = x.
ENDFORM.                    "open_form_sammel
Druck schließen -
FORM close_form.
CHECK NOT x_open IS INITIAL.
CALL FUNCTION 'CLOSE_FORM'.
CLEAR x_open.
ENDFORM.                    "close_form
Hilfsfelder versorgen für Sammelscheindruck -
FORM helpdata1.
   *mkpf = mkpf.
   *mseg-lgort = mseg-lgort.
   *ladr = ladr.
save_mkpf = *mkpf-usnam.
save_mblnr = *mkpf-mblnr.
save_budat = *mkpf-budat.
save_cpudt = *mkpf-cpudt.
save_ematn = *mseg-ematn.
save_lgort = *mseg-lgort.
save_ladr = *ladr.
   *t001w = t001w.
save_werks = *t001w-werks.
save_name1 = *t001w-name1.
   *ekko = ekko.
   *am07m = am07m.
save_lifnr = *ekko-lifnr.
save_ebeln = *ekko-ebeln.
save_ekgrp = *ekko-ekgrp.
save_linam = *am07m-name1.
save_lina2 = *am07m-name2.
   *t024 = t024.
save_eknam = *t024-eknam.
save_ektel = *t024-ektel.
   *mkpf-usnam = old_mkpf.
   *mkpf-mblnr = old_mblnr.
   *mkpf-cpudt = old_cpudt.
   *mkpf-budat = old_budat.
   *mseg-ematn = old_ematn.
   *mseg-lgort = old_lgort.
   *ladr = old_ladr.
   *t001w-werks = old_werks.
   *t001w-name1 = old_name1.
   *t024-eknam = old_eknam.
   *t024-ektel = old_ektel.
   *ekko-lifnr = old_lifnr.
   *ekko-ebeln = old_ebeln.
   *ekko-ekgrp = old_ekgrp.
   *am07m-name1 = old_linam.
   *am07m-name2 = old_lina2.
save_lfa1 = lfa1.
IF NOT old_lfa1 IS INITIAL.
    lfa1 = old_lfa1.
ENDIF.
ENDFORM.                                                    "helpdata1
--- Versorgung der Hilfsfelder vor CLOSE_FORM bei Sammelscheindruck --
FORM helpdata2.
old_lfa1 = save_lfa1.
lfa1     = save_lfa1.
old_mkpf = save_mkpf.
old_lgort = save_lgort.
old_ladr = save_ladr.
old_budat = save_budat.
old_cpudt = save_cpudt.
old_werks = save_werks.
old_name1 = save_name1.
old_mblnr = save_mblnr.
old_lifnr = save_lifnr.
old_linam = save_linam.
old_lina2 = save_lina2.
old_ebeln = save_ebeln.
old_ekgrp = save_ekgrp.
old_eknam = save_eknam.
old_ektel = save_ektel.
old_ematn = save_ematn.
   *mkpf-usnam = save_mkpf.
   *mkpf-mblnr = save_mblnr.
   *mkpf-budat = save_budat.
   *mkpf-cpudt = save_cpudt.
   *mseg-ematn = save_ematn.
   *mseg-lgort = save_lgort.
   *ladr = save_ladr.
   *t001w-werks = save_werks.
   *t001w-name1 = save_name1.
   *t024-eknam = save_eknam.
   *t024-ektel = save_ektel.
   *ekko-lifnr = save_lifnr.
   *ekko-ebeln = save_ebeln.
   *ekko-ekgrp = save_ekgrp.
   *am07m-name1 = save_linam.
   *am07m-name2 = save_lina2.
ENDFORM.                                                    "helpdata2
Form Lesen Warenausgang Lohnbearbeiter -
FORM lesen_wlb USING objky.
nast_key = objky.
CLEAR retco.
SELECT SINGLE * FROM mkpf WHERE mblnr = nast_key-mblnr
                            AND   mjahr = nast_key-mjahr.
SELECT SINGLE * FROM mseg WHERE mblnr = mkpf-mblnr
                            AND   zeile = nast_key-zeile
                            AND   mjahr = mkpf-mjahr.
IF sy-subrc NE 0.
    retco = sy-subrc.
    EXIT.
ENDIF.
PERFORM tab156_lesen.
xskkz = t156-rstyp.
PERFORM tab001w_lesen.
IF NOT mseg-matnr IS INITIAL.
    PERFORM material_lesen.
ENDIF.
ON CHANGE OF mseg-lifnr.
    PERFORM read_address.
ENDON.
ENDFORM.                    "lesen_wlb
*eject
Fuellen der ITCPO -
FORM itcpo_fuellen.
IF xscreen NE space.
*- Testausgabe auf Bildschirm -
    itcpo-tdpreview = 'X'.
    itcpo-tdnoprint = 'X'.
ELSE.
    CLEAR: itcpo-tdpreview,
           itcpo-tdnoprint.
ENDIF.
MOVE-CORRESPONDING nast TO itcpo.
itcpo-tdcover   = nast-tdocover.
itcpo-tddest    = nast-ldest.
itcpo-tddataset = nast-dsnam.
itcpo-tdsuffix1 = nast-dsuf1.
itcpo-tdsuffix2 = nast-dsuf2.
itcpo-tdimmed   = nast-dimme.
itcpo-tddelete = nast-delet.
itcpo-tdcopies = nast-anzal.
itcpo-tdprogram = sy-repid.
ITCPO-TDTELELAND = US_COUNTRY.
itcpo-tdsenddate = nast-vsdat.
itcpo-tdsendtime = nast-vsura.
itcpo-tdnewid   = x.
ENDFORM.                    "itcpo_fuellen
*eject.
------------ FORM lesen der Lagerortadr. ---------------------------*
FORM ladr_lesen.
DATA:    BEGIN OF addr_sel.
          INCLUDE STRUCTURE addr1_sel.
DATA:    END OF addr_sel.
CLEAR ladr.
SELECT SINGLE * FROM twlad WHERE werks = mseg-werks
                       AND lgort = mseg-lgort
                       AND lfdnr = '001'.
IF NOT twlad-adrnr IS INITIAL AND sy-subrc IS INITIAL.
    MOVE twlad-adrnr TO addr_sel-addrnumber.
ENDIF.
CALL FUNCTION 'ADDR_GET'
    EXPORTING
      address_selection = addr_sel
    IMPORTING
      sadr              = ladr
    EXCEPTIONS
      OTHERS            = 1.
ENDFORM.                    "ladr_lesen
**&      Form REPRINT
      text
*FORM reprint.
TABLES : nase.
DATA : x TYPE string.
IF nase-vermo = 2.
   x = 'REPRINT'.
ENDIF.
*ENDFORM.                    "REPRINT
Kindly do the needful.
Thanks in advance
Regards
Swarna

Hi Swarna,
CALL FUNCTION 'OPEN_FORM'
EXPORTING
device = 'PRINTER'
language = language
OPTIONS = print_infos
<b>form = tnapr-fonam</b>
dialog = ' '.
x_open := x.
I thing its not a good way to pass the Form name to the Parameter.
Try like,
data : temp_form like tnapr-fonam.
<b>form = temp_form</b>
Thanks.

Printing chinese characters on a Zebra printer using Adobe Interactive Form

Hello,
We have created an Adobe Interactive Forms in SAP with some words in English and another one in simplified chinese. We have defined a Zebra printer in SPAD with the AZPL203 driver.
When we print the form in the zebra printer some of the chinese characters are printed and some of them no.
Has anyone faced the same problem?
Thanks a lot
Miquel A. Vergara

Hi,
Welcome you post on the forum.
However, this is not the right forum for you. It is only for SAP Business One user. Please search entire forums first to find which one is more proper.
However, this issue may not be related to SAP at all. Search on the web would be better.
Thanks,
Gordon

Printing chinese characters in a zebra printer using SAP Interactive Forms

Hello,
We have created an Adobe Interactive Forms in SAP with transaction SFP. In this form we have used some words in English and another ones using Simplified Chinese characters . We have defined a Zebra printer in SPAD transaction using Device Type AZPL203.
We have defined an ABAP program to printout this form. When we print it in the zebra printer some of the chinese characters are printed and some of them no.
Has anyone faced the same problem?
Please if this is not the right forum, please could you adress me to the right one?
Thanks a lot
Miquel A. Vergara

Hello,
Please check if the notes below are useful.
83502 - Printing Support for Native Languages
1612051 - Foreign text printed with garbage characters
Thanks,
Ravi

How do I print a interactive form out? It allows printing and filling.

Hi, I'm trying to print out an interactive form that I filled out and then saved on my hard drive. The author allows printing and filling out of the PDF when it was created. I'm running Windows 7 64-bit and have Adobe Reader XI (11.0.06) installed along with the current drivers for my compatible printer. Within the same PDF the first sheet "instruction sheed" is an all text flat form, which prints just fine. The problem lies when I try to print other sections of the PDF, When I try to print it all I get is the header and a footer that the author created, but all the spaces where questions/ text and my fill in answers don't show up on the print preview image or when the printed sheet comes out of my printer.
I have tried to print as an image without success. I don't think its an author issuse because it was released out of a California Department for several houndred/thousands of others. Please if you have any ideas or questions i look forward to any advice.

Sorry I forgot to add that the PDF is devided by a "Chapter" style cover face that devided multiple sets of forms in to categories. At the bottome of these categories is a "Print whole document" which can only be clicked once the whole thing has been filled out. Do to some information over lap some dates don't follow the (time line order) it requirest to fill in the data so two of the categories show up as incomplete. Take a look at the document yourself, maybe I NEED to rewrite the information and see if that works.
*Edit* Looks like I CAN print a blank form at the begining when it asked me if i want a blank form, will try to rearange dates so it will show as all COMPLET.
PDF file can be found at the California government website:
http://www.chp.ca.gov/recruiting/pdf/Chp446.pdf
http://www.chp.ca.gov/recruiting/pdf/Chp446.pdf

Help needed in printing interactive form

Hi Friends
I just developed an application which access ECC
can any one guide me to print the output pdfform
i have opened result interactive form and placed a print button ...next which script i should use? formcalc or
java script..since my application is a java webdynpro .
can you give me the piece of code for that..formcalc
already got the script..but i dont know the exact java script for printing.
plz help me in this issue
vivek chandra

Hi Raja
Thanks for that stuff..very helpful
i have 3 inputfields on one of my interactive form
i was asked to fill those fileds with predefined data
so that once the app is run, input form fields should
dispaly the predefiend values.in wdinit method i could
do that using wdContext.currentelement.setName("xxx");
i have 3 fields..three are text fields.from the third field need to eneter the date,its a PO Bapi..i did context binding ..i could drag the input fields..
but when iam trying to set predefiend date for the
3rd field..its not accepting it..since it is of type
date.. do i need to create any data type for the 3rd field in javadictionary????plz guide me in this issue
regards
vivek chandra

Print Preview in RFx does not show new Adobe Interactive Form

Hello Experts,
I am trying to assign a standard Adobe Interactive form as the output form for SRM RFQ. I have carried out the following steps in customising under "Define Actions for Document Output".
- Selected bid invitation Action Profile = BBP_PD_BID
- Go to "Processing Types"
- Create a new Processing Type called "External Communication"
- Set the following values to the new processing type:
     - Form Name = BBP_BID_INV_ADB
     - Form Type = P PDF-Based Forms
     - Format = BBP_BID_INV_ADB_MAI
     - Personalization Type = 5 - Recipeient Variable Replacement
- Save Changes
My problem is that when I go to into the BID (RFx) and click "Print Preview" it picks up the standard Smartform, not the new Adobe form I have added as required.
Please can you advise of any additional config settings or other steps required to ensure that the Adobe Form is called when I click "Print Preview"?
We are on SRM 7.0.
I look forward your response.
Regards,
Matt

Hi Matt could you please tell me how do you solve your issue? I have the same and I cant find the solution.
Thanks a lot
Kind Regards

Adobe Designer - Interactive form/template (visible but don't print messges

Hello,
I'm making a interactive form or template with Adobe Designer, in which I have one object field and a few text fields.
What I need to do is add messages on those fields so the person using the interactive form/template can know what to input in each field and were the fields are since they don't have border or background. For example I need to have a message like this: "click here to add your logo" in the object field, those messages can't be printed since they are just instrucctions for the person using the form/template.
I tried the Tooltip but since the fields can have border people won't know were the fields are and the Tooltip only works when you place the cursor on the field.
Any suggestions?

The input parameters you are seeing in a 'Web Dynpro like' form are more than likely input parameters to the process. Process input parameters come from action input parameters in process blocks and actions that are not mapped. Given that, it sounds like you have not mapped all the input parameters for one or more of your actions in your process. By default, GP provides the process initiator the ability to specify the values of these inputs when a process is started. To avoid this you can either,
1. Map all the input parameters.
2. Specify the process to start automatically under the 'Instantiation' tab for the process template. By selecting this, input parameters are ignored and their default values used.
3. Don't expose these parameters if they are not required or applicable to your process. This can be done at the action or block level under the 'Parameters' tab.
~Greg

Interactive Forms - Print orientation - ZPL

Hi,
i am going to create my first label on a zebra printer with adobe forms (LiveCycle-Designer 8.2). When i print the label with a portrait-format everything is fine.
In a special case the height of the label is about 2cm and the width is 10cm. So the masterpage automatically turns to landscape-format. The preview is ok but when i print on the zebra the label is rotated with 90 degrees.
I think the landscape-format changes the ZPL-code.
Has anybody experiences with this penomenon?
best regards
Frank Thomas

Hello Markus,
ok, thanks a lot. I got it and it works fine for me :-)
Maybe, you know how to adjust paper width on a zebra printer ?
We did use ZPL command ^PW in smartforms.
But i don't know how to use this in AdobeForms ?
When using DeviceType AZPL203 (zpl203.xdc) the output
is shifted to the left.
Sebastian

Interactive form on Zebra Printer

Similar Messages

Maybe you are looking for