Interactive Heuristic not working in product view

Good morning,
I am trying to run a Heuristic in the Product view (sapapo/rrp3) and I get the following message:
'Stage number algorithm can not be run in the simulation version' but I am trying to run this in our active version, any ideas?
thanks in advance.

Good afternoon,
The Heuristic maintained in the product master is the SAP_PP_002 (Standard lot) which is working but if you go into the header menu and we run the heuristic that replicates our nightly run (this is a 2 step planning run with SAP_PP_020 = Stage numbering algorithm and then SAP_PP_002 = standard lots).
It fails at the first step saying that it can not be executed in the simulation version?
Could this refer to the nature of the process rather than a simulation planning version? I mean due to the process that the number staging algorithm works, may not work running in APO and simulating the results (due to the data is only firmed once saved).

Similar Messages

Cascading Dynamic Parameters Do Not Work In Crystal Viewer 2008?

I have generated a report with Crystal Reports 2008 that uses a dynamic cascading parameter. I work in waste management and the report I create in Crystal is used as a "template" with the tonnages collected from all of our customers. Our less technically minded employees can then open this report with Crystal Reports Viewer 2008, use the drop down menus to select only the customer they need a report for and then export this to PDF for delivery.
The report as designed works perfectly in Crystal Reports, but the parameter does not work in Crystal Viewer.
Some of our customers have more than one physical location that we service. The cascading dynamic parameter in my report allows you to select the customer name, and then it only shows the locations linked to that customer, so the end user can select only the relevant location(s) for the report. The cascading parameter is dynamic and allows multiple selections, and is linked to a Saved Data formula. The report is saved with the data.
When the report is opened in Viewer, one of two things happens. If the report is saved in Crystal Reports and a specific customer/location is selected, then ONLY those selected customer/locations are available in the Viewer. If ALL the customers/locations are selected in Crystal Reports and saved, then in the Viewer they are all available, but selecting one customer does NOT narrow down the locations (i.e. it does not "cascade") and instead ALL of the locations are available even if they do not apply to the customer.
If I use a single dynamic parameter and select ALL of the customers (for example), then when this is opened in Crystal Viewer all of the customers are available from the parameters drop down and the report works fine. As soon as this is tried with a cascading parameter however, Crystal Viewer falls down.
Does anyone know of a workaround to this or if there is something I am doing wrong?

I am using the free Crystal Report 2008 Viewer along with designing reports with Crytal Reports ver 12.3. With a test file from SAP called "Interactive Parameters", the parameter feature works to refresh the report. The parameters that are supplied in the sample report work with Viewer. They show up under the parameter list in the parameter side panel in Viewer and are available to make record selections. When I add a parameter to the sample report in Crystal 2008 and then view the report in Viewer, my parameters are unavalable for record selection while the original parameters remain available. Futher, my parameters are displayed under a section called "Current Data Set" in the Parameter side panel, while the selectable parameters are displayed under the "Parameter" section in the parameter side panel. There must be a setting that is treating the parameters I create differently form the parameters created in the original sample report. Any help would be appreciated.

OSS note is not working in production but works correctly in test system .

hello friends ,
weh have implemented one OSS notes , which is working corectly in Test system , but not working in production .
Could you please let me know , what could be the reason ?
OSS note no 1064273-
Regards,
Manoj

Pls. check with Basis if the OSS note has been implemented properly and successfully.

Interactive notifications not working in my 5s

uupdated my iphone yesterday but after update my interactive notifications not working

Have you restarted your iPhone? http://support.apple.com/kb/TS1702
Restart the app
Close the app and open it again.
Restart your device
Turn the device off and on.
If that does not help, reinstall iPhoto - that fixed the same problem for me, but that will delete the iPhoto library, so your journals and slideshows will be lost. You may want to make a backup of your iPhone before you try that.
Reinstall the app
Remove the app from your device and reinstall it. Remember that deleting an app also deletes its data.
Delete the app.
Press the Home button.
Go to the App Store and download the app again.
Wait for the app to download, then open it from the Home screen.
If the download stops, you can resume it.
If even reinstalling iPhoto does not help, restore your iPhone: http://support.apple.com/kb/TS3281

Input textbox not working in Fullscreen view

Hi,
I've created one form application in flash, i have fillup the form(inputbox) in normal view, its working fine. but it's not work in fullscreen view,
Please let me know how do enter the text in input textbox in fullscreen mode.
Note: input textbox not work in fullscreen mode.
Thanks
Suresh

Hello,
I think your problem is very similiar to a problem that I had been suffering from a few days ago.
I think that the below code should solve your problem:
stage.scaleMode = StageScaleMode.NO_BORDER;
Chinmaya

Infopath systemuser() method is not working in infopath view @extrant site .

We have a sharepoint webapplication with infopath views .We have controlled the switch view with authenticating login use id .It is working perfectly in intranet.
When we are publishing the site to internet using public ip @ that time initially infopath forms were not opening so i have used Alternate access mapping and published the infopath forms in ip instead of server name .
Now infopath forms are getting opened but system user() rule is not working and infopath edit forms are not working .Even list view web part with assigned to filtration is also not working .
I am stuck on the issue since Monday . Please suggest how to make it possible . it is very urgent.
We want our customer to access using ad authentication.

Jeeva,
Did you create this form in InfoPath itself or you are modifying a list into InfoPath?
The first screenshot shows you have selected Total "is not equal to" Jan+Feb….
You can simply add Total field with “TextBox” and double click on it and select default value button.
Once it will open up a pop up select “fx” button in value and insert all fields like, Jan, Feb…and then put a “+” sign in between
This will auto populate value once you enter it into any of the month filed.
Also it you have copied fields for several month in InfoPath it won’t work. You have to insert each field separately
Let us know your results
Regards,
Pratik Vyas | SharePoint Consultant |
http://sharepointpratik.blogspot.com
Posting is provided AS IS with no warranties, and confers no rights
Please remember to click Mark As Answer if a post solves your problem or
Vote As Helpful if it was useful.

SWL_SUBSTITUTION_DEFINE does not work in production

hi guys,
we have tested to set substitution in qas using FM SWL_SUBSTITUTION_DEFINE and it work. Somehow it does not work in production ? we have checked and set the same setting as if in qas but still user is not able to see the PR in her inbox. pls help

>The assigned agent is meant for classification of SOT
I am not sure that you mean by this? Is there a classification called SOT defined in the system, and the task has been assigned to this classification? If yes, then you need to check the substitution that it is active for this type of tasks (or that it is active for "all" tasks). You should be able to see this also in the sbustitution table (I mean the type of substitution).
Or do you mean that there is some authorisation role called "SOT" in the system, and the possible agents of this task are the users having this role? Then you should be able to see all the users in PFTC under the task.
Regards,
Karri
PS. Remember also to execute transaction SWU_OBUF to refresh the buffers. Maybe it is some strange buffer problem...

Push notifications not working with production (apnagent nodes Js)

Hi,
When we tested the push notification in sandbox using apnagent node JS it worked well. But when we switch the sandbox to production it is not working. When we debug the server side we are not getting any errors also in production, but push notifications are delivered to the devices.
First we thought it is a certificate issues and then revoked all the certificates in the portal and created new certificates still no luck.
Can any one tell me why push notifications are not working in production.
Thanks in advance!

You're welcome. The request has been sent in. I first saw your post in the Using Apple Support Communities Forum, now I see it's been moved to the iPod Forum, hopefully it will get moved again.
iIt's been moved.

Functions (back & stop ) are not working in production environment

Hi All ...
Some functions (back and stop) are not working in production environment, where as those functions are working in QA testing environement..please answer.. what could be the reasons for not working some functions
in production environement.
Regards,,
Krishna

Hi,
Based on the error message, it is related to the item in your production environment, then the workflow will occur exception.
As your workflow worked perfectly in your other environments, I suggest you can check if some item has is valid in the document library.
You can try to use Fiddler to track the web request and find in which item the workflow occurs exception.
Here are some detailed articles for your reference:
https://msdn.microsoft.com/en-us/library/vstudio/ee231573(v=vs.100).aspx
http://www.andrewconnell.com/blog/SP2013-Workflow-Advanced-Workflow-Debugging-with-Fiddler
Thanks
Best Regards
Jerry Guo
TechNet Community Support

Captivate 7 | Interaction template | Not working on tablets

Hello,
I have a problem with the interation templates provided in the Captivate 7.
Opening a blank project, I have insert a tab interactive template (ref screenshot below) from the option Insert > Interaction. After publishing project to HTML 5 the output is working fine on iPad. Later for the same project I have inserted some background and text within the interaction template and published again to HTML 5 and checked the output in the iPad and the interactions were not working as previously.
Regards
Chandru

This is the Elements forum. Try copying your question again here:
https://forums.adobe.com/community/adobe_captivate

Interactive Reports not working with APEX listener

Hi,
I have posted this question APEX listener forum couple of weeks ago but very few responses.
If any one from here can help then it would be great.
Interactive Reports not working with APEX listener
Best Regards,
Baig

Sorry for late response.
It was a firewall issue

WebDynpro ActiveX Button in Interactive form- not working in IE

Hi,
1) I am working with Interactive forms in WebDynpro. When I deploy the application, the PDF form is opens in a browser window, But the WebDynpro ActiveX button ( to call a method in view Controller) is not working.
When I copy the URL and try in another sysetm, its working.
I hope the probelem is with the browser settings.
2) And also, the 'https' URLs does not work properly in my IE.
Can you give me a solution for these problems?
Thanks,
Prabhakar.

Hi Prabhakar,
I doubt this is anything to do with the browser. Please let me know if you have already installed SAP Active Control Framework on your desktop.
I think this might be an issue. Also check for Adobe Reader version in both the machine.
Cheers
Satya

Security Issue httpOnlyCookies="true" is not working with production environment

Dear All,
I have tired to make set cookie value as httpOnly
The development environment is working fine and give me an output like that
Set-Cookie
WSS_KeepSessionAuthenticated={3644d93c-d1d3-46cd-845f-42c01640ab21};
path=/;
HttpOnly
But when implement the same changes in web.config production environment its not working
Set-Cookie NLSessionCdomainweb=a98q9jnsy0vXk5+RHeHnlKmM+HnneA9KmhIAR6g1bJiwTs8sD6d7dfV1gBffc8HiJXBowxdO8LhZAiIEKiFY6PzNWySyRs5rvgCfPu8XIFnqKcN4XQ4UL9PN3JI3f4E6;path=/;domain=.domain.com
I am using sharepoint 2010, under web.config i made the following changes
Add following tags under system.web
<httpRuntime maxRequestLength="2097151" enableVersionHeader="false"
/>
<httpCookies httpOnlyCookies="true"/>
Add following tags under <system.webServer>
  <httpProtocol>
      <customHeaders>
               <remove name="X-Powered-By" />
             <remove name="MicrosoftSharePointTeamServices" />
      </customHeaders>
    </httpProtocol>
Can any one tell me why it's happening i have checked all possible reasons from my side but no success
Regards
Rashid Bilgrami
RB

Hi,
From your description, I know you want to set cookie value as httpOnly but it is not work.
Please try to add codes below to your global.asax file:
<SCRIPT language="C#" runat="server">
protected void Session_Start(Object sender, EventArgs e)
try
if (Request.IsSecureConnection == true)
                Response.Cookies ["ASP.NET_SessionId"].Secure = true;
catch (Exception)
</SCRIPT>
Please refer to this article:
https://social.technet.microsoft.com/Forums/sharepoint/en-US/0fe55c13-3911-422e-af17-cb5c1ab2abd7/missing-secure-httponly-flags-on-sharepoint-2010-cookie?forum=sharepointadminprevious.
Best Regards
Vincent Han
TechNet Community Support

Attributes Not Working in Smart View

Hi All,
I have an ASO database that has attributes on the Cost Center dimension. In EPMA and in EAS, the attributes are correctly shown. When I pull data in Smart View for a specific cost center, I see data. When I apply the correct attribute, the data comes back as "N/A". I know for a fact that this cost center IS tagged as the attribute I am pulling, but it will not show in Smart View as belonging to that attribute. I am using version 11.1.2.3 and Smart View version 11.1.2.3.000 (Build 157).
Any thoughts?

Hello,
this is indeed strange. Not a real answer, but here are some suggestions to get more details:
Case sensitive?
What was the attribute of this cost center before?
Try a report on this cost center with all attributes. Does one work?
Try a different front end tool.
From EPMA do a full deploy (make sure you have saved you essbase objects to a save location)
Does it work?
Change the Attribute and deploy it again. Does it work?
If you found it, please update this here, so others will be able to find the solution.
Regards,
Philip Hulsebosch

Buttons Not Working in Content Viewer v21

I create two simple buttons in my document that go to the Next or Previous state of my Multi-State object On-Click. When I test it out in my desktop Content View and click the mouse, the only thing that happens is the Conten Viewer menu comes up. I've tried using the On-Mousover command and that does not work either. What am I missing?

You need to use on release. In CS6 it’s on release or tap.
Bob

Interactive Heuristic not working in product view

Similar Messages

Maybe you are looking for