Interactive PDF file using InDesign CS5

I've created an interactive portfolio within InDesign. Within the InDesign layout I've created a button "Testimonial" when the user clicks it reveals a reference letter. (The reference letter is also a button.) Then the viewer needs to click on a "close" button on the reference letter to go back to the portfolio view.
It's set up and when I view it within InDesign using the Preview area. It works.
When I export as a Interactive PDF and view in Acrobat. The "close" button is not there. So I'm unable to return to the portfolio view.
Any suggestions?

Thank you... what was wrong. Didn't I do everything correct and have the close button on top in the stacking order... was this a software bug?
I'm not sure what that other poster was doing. Duplexing won't exist until the drivers get 64 bit clean. I've been there and done that.
Dwayne

Similar Messages

How do I create an interactive PDF file in InDesign CS6 with Folio Overlays?

I have been trying to export an interactive PDF file using InDesign CS6. It exports fine, and all the content works except for the Folio Overlays I created. I created two Folio Overlays (one Pan & Zoom and one Scrollable Frame). The overlays work if I preview them from the Folio Overlays panel, but they do not work on the PDF document.
I am using File >> Export... to create the PDF document, and I am sure the PDF document is of the interactive type and not the print type. Am I exporting it incorrectly? Is there a specific step that I have missed somewhere? Do I need to create a Folio Build to make the Folio Overlays work?
When I mouse over the Folio Overlays, I get the crosshair cursor which only selects part of the image when I click and drag it.

PDF is one thing. Folios for DPS is another. There is a little bit of
overlap but not much.
The interactivity in the folio overlays panel is for DPS only.

Possible to create medium res .pdf file with InDesign CS5?

Hello,
Can anyone tell me if there is a way to create a medium res .pdf file with InDesign CS5?
I'm working with a client and have been sending him both high res and low res files of a catalog project. High res .pdf is 12.8MB and low res is 1.2MB. He is asking whether I can create something in between the two, say somewhere around 6 to 8 MB.
Any insight would be much appreciated.
Many thanks,
Tania

PDFs do not have a resolution. The graphics within do, however..
Look at the downsampling settings and experiment until you get what you want.
Bob

Combine PDF-files using Indesign?

Hi,
Is it possible to combine, lets say 15, PDF-files using Indesign and some scripting magic?
I know it's easily done in Acrobat Pro, but I'd like to skip that step and make it even easier for my colleagues.
Any hints, tips or links are much appreciated.
Thanks,
Thomas

All you have to do in Acrobat is drag one file after another onto the same window, correct? Then save?
You can combine PDF files with InDesign, but then you'd get an InDesign file, so you have to export as a new PDF again. Sure, a script can do that for you, but it still sounds like it would take more time, and *definitely* not as easy as the straightforward drag-drop-save steps in Acrobat Pro.

I can't open PDF files in InDesign CS5

Hi all,
I can't seem to open any PDF files of any version while using InDesign CS5...
I'm currently running InDesign in Windows 7 Professional x32bit...
This message keeps popping up:
Cannot open the file "TIG_Sheet_and_Application.pdf". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file may be open in another application.
I've made sure that the file was not open in any application, and its not just this particular pdf files... all PDF files can't be opened. The only thing that actually opens in InDesign are the indd files...
I try going through the plug-in list, but there's a bunch and I'm not sure which one is it...
Tried google search for a solution but found no solution...
Can anyone help me?
Cheers,

krystlew, and others reading this thread and considering the answers "snarky" or "not helpful": note that this is the InDesign SDK forum -- that is, a question posted here should be about programming for InDesign:
About this Forum
The InDesign SDK forum is for discussions on InDesign plugin development using the InDesign SDK. InDesign plugins are developed in C++.
Presumably, you found this discussion because the error message lead you here: that you cannot "open" a PDF. That's InDesign's usual message for all content that it cannot 'open' with the command "File > Open..."; try for example with a Word document, a JPEG image, or an Excel spreadsheet. InDesign is perfectly able to import these files -- but you cannot use "File > Open...". You must use the command "File > Place..." instead. "Placing a PDF" is described in the online Help: https://helpx.adobe.com/indesign/using/placing-graphics.html
It is a regular User Interface question and so unrelated to what this forum is for. General InDesign questions can be asked in the regular user forum: https://forums.adobe.com/community/indesign/content
I believe that the original question was posted in error in this forum and thus got interpreted as "what do I need to code to natively open PDFs". The answer is: lots. InDesign does not provide anything to natively read a PDF, so you would have to program literally everything.
(Some of the other posts ask why InDesign cannot already do this -- and the answer is, "Because It Is Incredibly Hard". The counterargument I usually give is that InDesign can also import (place) and export JPEG images and yet it is not a JPEG Editor. I can provide technical arguments as well. One is, there are lots of ways to construct PDFs in such a way that important content information is lost -- even something as basic as "what text is actually here".
... So, kudo's to Markzware for making it possible anyway! If you found this post because you need to convert a PDF file to a native, editable InDesign document, try their software.)

Interactive PDF meltdown with InDesign CS5

Howdy,
I've just switched from InDesign CS3 to CS5 and I was creating interactive PDF's for my portfolio.
I work as a retoucher and all I was doing was making an image change from the "before" to the "after" image when the cursor rolledover the image. Easy-peasy job done.
For some unknown reason, when I now open my images in Acrobat, the images are terribly pixelated and the rollovers do not work.
It seems the images have to be at 300dpi, whereas before I can downsample them a little to reduce file size and still get a creditable "before" and "after" pic.
Now it's just a mess mith a massive file size! This seems to have happened all by itself and it's gone into meltdown!
Any ideas welcome

Rollovers are currently not working properly, we expect a fix shortly.
InDesign's PDF export system does not have any connection to Acrobat, so your main question needs to be posted on the InDesign forums.

Items missing on PDF when using Indesign CS5.5 doc in Indesign CS6

I have had the problem of picking up a document that had been created in Indesign CS5.5 processing to PDF out of Indesign CS6 and two lines of type and two lines of outlined type had 'disappeared' when run to a PDF.
I spent some time investigating layers etc to no avail. When I eventually processed the document out of CS5.5 to PDF the result was exactly as appearing on screen in Indesign.
Does anyone know of this discrepancy between 5.5 and 6 or am I doing something wrong?

Is it interactive PDF or the Print PDF ?
Are you using the same settings in Cs6 that is in Cs5 ?
also, are these items on the master page ?

Video is not loading in Interactive PDF created using Indesign 6.0

Hi All,
I am adding the mp4 video within the Indesign 6.0 and when I convert the same into the interactive PDF format but video are not loading at all in iPad. I have added the custom HTML tag as object but still its negative results.
Please help me out if you have any suggetions on how we can have the video running in interactive PDF on iOS.
All your help is very much appriciated.
Thanks & Regards,
Sumanth C N

Not all readers on an iPad can show video! In fact Adobe Reader cannot! You must third-party apps. The best is PDF Expert from Readdle (US $10).
This article explains this issue:
For Interactive PDF, Not All Readers Are Equal | InDesignSecrets

Problems printing Interactive PDFs built in InDesign CS5

I am having issues printing PDFs that I have exported from InD CS5. I am creating interactivity in InD, such as buttons, click on, roll off, etc. The interactivity works perfectly, however, when I try to print, the PDF, the rollovers print, even though I do not want them to. The rollovers go away once I click through all of the buttons, but I do not want to have to have my client have to click through all buttons first, before successfully printing the PDF without the rollovers.
anyone have any experience with this? or solutions?
thanks,
aligori

@CoGordo4:
If the answer for Peter's question is "yes", I suspect the following:
You export to PDF with the option "Export Layers: All Layers" and you have a layer set to "Show Layer" NOT checked in the Layer Options panel above your graphic with an object that obscures your vector graphic filled with the color of your background. Thus the image will be included in your exported PDF but effectively does not show.
If so, just export with "Export Layers: Visible & Printable Layers".
If this is NOT the case then we possibly could circumvent the problem:
Is your placed vector graphic of the file type EPS?
Do you have Acrobat Pro and Acrobat Distiller installed?
If so, try to convert that EPS to PDF using Distiller, preflight it with Acrobat Pro and place the PDF.
If the answer is "no" (you could not see your graphic in Preview mode), some of the following could apply:
1. The holding frame of the graphic OR the graphic inside the holding frame is marked as "Nonprinting" in the attributes palette (check both instances).
2. The object is positioned on a layer with "Print Layer" NOT checked in the Layer Options panel and you export with "Export Layers: Visible & Printable Layers" in your PDF export settings.
Uwe

Font issue occurs when creating pdf file from Illustrator CS5.

I have some design files which are created in Illustrator CS5 and I made them as a pdf file using InDesign CS5 while I open the pdf file in Acrobat Pro 9 I have no issue with the file but my client is using Acrobat Pro 7 while they open the pdf file in Acrobat pro 7 junk characters(rectangular boxes) are appearing in it. Can anyone please look in to this and confirm is this a version bug or something else? It would be much appreciated if some give any idea to get rid of this issue.

Aside from the PDF version, but to follow-up to what David is getting at, you are likelythe fonts are not embedding. Because they reside on your system you see the PDF as it should be. Your client likely does not have the fonts installed.
Make sure your ID export of the document is including the fonts. If that still does not work, check to make certain the fonts you are using allow them to be embedded.
If all else fails, seeing how this PDF is for client review (I assume) have the PDF settings set to convert type to outlines. This gets you past the current dilemma as you figure out the cause.
Take care, Mike

Open a URL link in the same window as SWF file in indesign CS5

Hello,
I am trying to create a SWF file using indesign CS5. I have created buttons and placed in URL links but they always open another window. I would like to know if there is a way to have the URL open in the same window that the SWF file has been created. I tried, putting "_self" to target it in the URL bar, but nothing works.
Thanks in advance
TK

Okay, I found the code but I can't get it to work locally. If you have a web server maybe you can upload the files (swf and html) after you Publish them:
import flash.net.URLRequest;
import flash.events.MouseEvent;
var myURL:URLRequest = new URLRequest ("http://www.google.com");
testlink.addEventListener(MouseEvent.CLICK, clickText);
function clickText(myevent:MouseEvent):void {
navigateToURL(myURL, "_self");
you have to have on the stage a link element called "testlink" (see the code above) which would be a Movie Clip with the label testlink. It can be anything from InDesign: a button, a rectangle, a circle, a graphic, you get the idea. Just select that object in Flash and label it testlink or anything you choose but if you change the name from testlink also change the name in the code snippet where the line "addEventListener" is.

Interactive PDF file with layer visibility issue.

I have created an interactive PDF file in InDesign CC and added buttons in Acrobat CC. The buttons reveal layers with the layer visibility action under properties. The problem is that Reader takes 3-4 seconds to show the layer in full screen mode and flickers in any other view.

For that kind of volume and unattended operation, you want InDesign Server – which is the server/high volume edition of INDD.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Thu, 3 Nov 2011 06:58:07 -0700
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: How do I create an interactive PDF file with variable data
Re: How do I create an interactive PDF file with variable data
created by Ti26E31DSxxx<http://forums.adobe.com/people/Ti26E31DSxxx> in PDF Language and Specifications - View the full discussion<http://forums.adobe.com/message/4005459#4005459

Interactive pdf using Indesign CS5.5 problem with layering

Hi all
I have designed an interactive pdf - not for the web. I have a problem layering out a page. On the page there are 6 buttons. Each button when pressed will bring forward a box containing content/information. When I designed the page using indesign cs5.5 I made sure the largest box of information was at the top of the layer. I thought this would be the cleanest way to present the page. By having the largest content box (each of the six content boxes are different sizes) at the top it would cover the other boxes. When I exported the file out the smallest box was at the top, then the secondest etc. It looks pretty messy.
Is there a way to ensure that the lagest content box is at the top when it exported to pdf????
Regards

Have patience!
Have you tried putting that largest box on it's own layer at the top? I don't know much about buttons etc though, if you wait someone will come on here that does. A lot of contributors are in different time zones though.....

[JS][CS5] how to use bridgetalk to open pdf file through indesign?

Hi,
I need help on this:
I have created a dialog box which has a button and on click of tht button i wanna open an external pdf file using bridgetalk. Or if not bridgtetalk then how to do it?
Thanks.

Mark,
Yes, i would like to open the PDF in system's default reader.
So how can i do that?
Thanks.

How do I create a downloadable link from an Interactive PDF file created out of InDesign CS6?

Hello,
I created an Interactive PDF file out of InDesign and would like to make the large file a downloadable link and share it with the user in an email. I do not want to use DropBox or GoogleDrive.
The company I contract for has their own site - do I insert the file into the site or can I create a separate link for it?
I will be recreating these presentation PDF's constantly, so I would like to know if there is a simple way to create this link for files in the size of 7-12MB.
Any ideas on downloadable links? I do have flash - but rarely use, perhaps load the file out of flash?
Thank you so much for your help,
Megan

Hi Willie,
Thanks for your help. Most likely contact the company who maintains the
site then to share the file with them I'm assuming?

Interactive PDF file using InDesign CS5

Similar Messages

Maybe you are looking for