Interactive portions of web sites are not working. I click on the interactive buttons and nothing happens. All these sites work normally on Safari. I am using a MacBook Pro and an IMac.
Examples are click to purchase or click to download PDF files. This is happening on most if not all websites.
Well that's nice and all, but why not just spend the 50 bucks on a router? Also, why do you need a crossover cable? Modern operating systems do not require crossovers anymore.
~David
Similar Messages
-
I am not able to click on the installation options for CS2. All the boxes are gray. Help.
I am not able to click on the installation options for CS2. All the boxes are gray. Help.
You can refer to the article:
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3 -
I have just acquired an iMac desktop (about 4 years old). I want to connect to my Apple airport wireless network, but cannot remember the password. How can I access the password or, if necessary, reset it. I already use a MacBook Pro and an iPad on the network and don't want to jeopardize what already works well. I am not all that computer literate.
How can I access the password or, if necessary, reset it.
Read the user manual that came w/your Airport router or you can cross-post in one of the AirPort Forums for instructions. -
Hi! I'm using a Macbook Pro, and my photo booth stopped working! I just updated my software yesterday, but it still doesn't work!! The green light does go on though, any suggestions on how to make it work?
In what way is it not working?
Please describe in detail all you have attempted to do in order to resolve the issue. -
I am having trouble viewing anything that is on wordpress, including the wordpress site. This means I cannot view my own wordpress blog too properly - no images are viewable, only plain text and hyperlinked text. This happened immediately after I upgraded to Mountain Lion. My Mac is mid-2010. Everything else works fine. Thanks.
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
I don't have unlimited texting so I have those who text me a lot send their text messages to my e-mail address [email protected]
I reply through the gmail app on my phone and it's been working out fine for the past year. The other day I was experimenting with iMessage on my MacBook and i responded to a few messages from people with iPhones through my MacBook. I didn't like it so I logged out because suddenly I wasnt getting e-mailed those messages like I was before. Now that I'm logged out I can recieve any messages and a friend says that it auto responds with "this person can't be reached with iMessage at this time"
What can I or my friend do? I don't want to buy an iphoneyes other people can send an email to me through their text message app on their iphones and it works fine. theres just one person who cannot and she lives in a different state. i did tell her to delete the entire thread of messages that i have with her but i'm not sure if she did it correctly and may still be replying to a message that i sent through iMessage days ago. i just sent her a message about turning on her MMS. i am also asking her to send the messages to a completely different address that she doesnt have in her phonebook so hopefully that will work.
-
What are the uses for Macbook pro and Macbook air?
Hi! I am deciding between MBA and MBP and need to know what the different uses for each one was. Like what would you use the MBA for and what would you use the MBP for?? All opinions welcome!!
They're actually pretty comparible in what they can do if you're talking about the base model of both (say 13") with 4GB RAM. At that level, the Pro has the advantage if you're going to watch or burn DVD's or CD's, as the Air has no optical drive. But otherwise, they're pretty much the same--full-sized, backlit keyboard, camera, beautiful screen, etc. If you're going for more than a basic 13" Pro, then things start to change. For example, you can get up to 8GB RAM on the Pro, and a huge hard drive, you can also get a 15" or 17" size. You will be paying a lot for these, but, obviously, if you're going to be working on, say, making videos (which you may then want burn onto disk) the Pro is very much what you'll want.
However, if you don't need or want any of that--if, for example, you plan to do the usual programs (word processing, games, web surfing, music, etc.), then you really won't see much difference between the two. At 4GB RAM and a 13" screen, the big difference is going to be thickness and weight, not power. And in this the Air will have the advantage--it's really amazingly slim, light and with a SSD, faster (you pay extra--a lot extra--to get SSD on the Pro).
Just to make the point, I switched from a 13" Pro to an 11" Air. My hard drive size is half what it was with a Pro, but I was barely taking up half of that amount on the Pro, and so have plenty of room on my 128GB Air (you can get 256GB for the 11" if you order it online). Absolutely everything my Pro did, my Air does (sans optical drive), only faster and lighter and more compact--meaning it takes up less table space, slips in and out of my bag faster, balances on my lap easier, etc. But there was no interruption of service--I switched pretyt seamlessly from 13" Pro to 11" Air.
The Pro offers you more options for power, screen size, HD size and optical drive. But it's really pretty surprising how few of us need that much power, that much room, or the optical drive. It's very freeing to realize that less can be more than enough. -
Help me!
You can add a virtual button that you can use - heres how:
First make sure you are on version 5
the go to SETTING>GENERAL>ACCESSIBILITY>ASSISTIVE TOUCH
You will then have a button on the bottom right hand corner screen that is always there (you can move it around if its in the way). Pressing it will allow you to go to the home screen.
Good luck - it happened to me too and this was a life saver - I booked it into be seen at the Genius bar but by the time my appointment came through (it took a few days) the home button started working again - literally just as I waas in the shop! Think it might have just got a bit sticky as my 2 year old was playing with it. -
I am using a OSX MacBook Pro running Mavericks version 10.9.4 and using Firefox 30.0. My Mac has recently been hijacked by a program called "Trovi". Whenever I open a blank new tab in Firefox the tab opens it opens with Trovi. The Mozilla forums offer support but all solutions are for users who run Windows. How do I remove Trovi from my Mac? Please help.
Hey there! I answered this in another post a moment ago, this may be extremely helpful...I had the same problem until very recently with Trovi.
Re: Trovi Virus Removal Needed
Best of luck! -
My internet connection is fine, everything works but firfox icon. It was workin fine yesterday and now nothing but a small blue circle and then it disappears.
Thanks.
MarkMy internet connection is fine, everything works but firfox icon. It was workin fine yesterday and now nothing but a small blue circle and then it disappears.
Thanks.
Mark -
I have tried using the browse and buy content from the iTunes Store tab on the website and followed everything it says and still can't buy anything.
I understand that Firefox is no longer working on your Windows Tablet. The development of Metro did stop and has been discontinued. However what version were you on before this started to happen?
-
Have a deadline Wednesday and need to figure out how to fix this issue. I saved some files to a thumbdrive, but forgot to add my Font Book.
In the Creative Cloud desktop app, click on Fonts > Add Fonts from Typekit to see the fonts you can download from Typekit with your CC subscription.
-
We have a brand new SharePoint 2013 farm which we just put into production. As users have begun creating their My Sites, the My Sites web application database changed to a status of "Database is up to date, but some sites are not completely upgraded."
Huh?
Prior to deploying to production, we had some test users that had created My Sites, and everything was fine. The database status was "No action required".
Anyone know why the creation of My Sites would cause the database status to flip to this warning?HI Kleung,This seems to be that after the patch upgradation some of the sites are not upgraded properly.Please check the below thread that exactly talking about the issue that see in your enviornment.
http://expertsharepoint.blogspot.de/2014/03/data-base-is-up-to-date-but-some-sites.html
First of all, to identify what site collection doesn't got upgraded.
Run: stsadm.exe -o localupgradestatus > upgradestatus.txt
or
PSConfig.exe -cmd upgrade -inplace b2b -force -cmd applicationcontent -install -cmd installfeatures (Run from one of the WFE server)
In below as you see, there no site collection that need upgrade. If you have any, you can identify
them by searching by word "Needs upgrade" in this file.
Secondly, run the command in the Power Shell:
For resuming the upgrade, you’ll need the ID for the database :
Get-SPContentDatabase -Identity <your content database name>
When you got the GUID for the database you can then resume the upgrade
upgrade-spcontentdatabase -id <database
GUID>
Finally, check the upgrade status by running stsadm again:
stsadm.exe -o localupgradestatus > upgradestatus.
Thanks
Anil Avula See Me At: http://expertsharepoint.blogspot.de/ -
The computer then shut down then came up with the message No bootable device---insert boot disk and press any key. I have inserted the disk and nothing is happening. Any ideas?
Thanks in advance.Bootcamp will support your MacBook Pro, and 32 bit versions of windows 7 for sure. To find out if you can run 64 bit versions go through the boot camp assistant on your mac, partition the disk, and it will list compatible operating systems. Windows 7 will still work even if it's not there.
You can find the type of ram by going to About This Mac in the Apple menu and clicking on More Info…
Your hard drive will be 2.5" sata drive, though I'm not sure if it's user replaceable on that generation. My friend has a similar one and I think only the ram and battery can be changed on his. Good luck! -
OATS - Browser is not getting launched when I click on the record button.
Hi,
I've just installed Oracle Application Testing Suite in my machine. During the installation process I was intimated that the EmpAppServer in the installation path does not contain the jboss binaries. However, it allowed me to continue with the installation.
I've installed the OATS and the OpenScript. I need to record scripts for a web application. Now when I click on the record button, the browser is not being launched. I don't get any error message too. I'm not sure if this issue has got anything to do with jboss.
Can someone please help me out?
Thanks!Try to run the batch files in the OpenScript directory to disable and re-enable the browser helpers. Which browser do you have OpenScript set to launch, IE or FF? Which version of IE and FF are installed on your machine?
\OracleATS\OpenScript
InstallBrowserHelpers.bat and UnInstallBrowserHelpers.bat
Maybe you are looking for
-
USB devices attached to this computer has malfunctioned....
everytime i plug my ipod in that is what is coming up along with "Windows does not recognize it" i already called apple and they told me that it was my pc's problem..i called dell and they told me that i could talk to a rep for 100 dollars..but previ
-
My T42 has started going black as if in standby but it is not. I replaced the AC adaptor because it did not do it while on battery but now it is doing it on battery too. Any suggestions as to what the problem is. I am running Windows XP Pro. Moderato
-
I have say three columns in a report, Col A that aggregates by SUM, Col B that also aggregates by SUM and Col 3 that aggregates by Avg Col A Col B Col C Amount Qty Avg price 10 3 3.33 20 4 5 30 7 ? Grand Total (use of report total) I want to see Sum
-
IMac crashes when previewing some jpg files
When I preview some jpg files using quicklook my Mac crashes, I get the same result when using get info on the same files. Other jpg files can be previewed without this problem. All jpg files open fine in Photoshop and can be saved with a different f
-
SOLVED: Blank Installer Alert dialog - CS4 Installer vs Safari 4
According to the Adobe KB, the blank installer alert dialog is a result of having Safari 4 installed. (Seriously?!) They were of the opinion that it meant you didn't meet minimum system requirements, but that's not the only way to get it. You can als