Interactive report showing only the aggregation rows

I have an interactive report with three columns that can be selected for aggregation. When I select one of the aggregation columns, I get the break logic that summarizes the columns I selected. My question: Is there a way to select the aggregation column and see the summed values only?
Example:
Fields: Company, Division, Location, Employee Name, Employee Salary
Aggregation on: Company, Division, Location.
Company Division Location Emp Name Emp Salary
Able 1 East Joe 100
Able 1 East Tony 200
Summary for Company Able, Division 1, Location East 300
I want to be able to see everything, but when I select aggregation at the location level, I want to just see the Summary line.
Thanks for any suggestions!

Create a Row Count Measure, as the value being 1, in your Universe for the report. Add that Row Count into the query for the report, re-execute the query, highlight the entire report and then set a filter for that by dragging and dropping the Row Count Measure and filtering where the value > 1.
Edited by: Dennis Scoville on Jul 27, 2009 11:29 AM

Similar Messages

CRM Interactive Reports show only current year data

Hello,
We have configured CRM Interactive Reports for IC scenario (CRM 2007) and are using reports like 'Service Ticket Volume', 'Service Ticket Closure', etc.
The issue is when we run reports (through IC_Manager business role), they only display data from January 2009 onwards. There is lots of data available in the system for 2008 which we can see from the backend. And we are also selecting date range that includes 2008. But somehow the report only shows tickets from Jan 2009 onwards.
Any clue why this is happening?
Thanks,

We've resolved this issue so I'm closing this message.
Thanks,

Display only the result rows only by using condition or any other way

Hello Everybody,
I've a web report where I want to diplay ony the result rows and don't want to display the detail rows at all. I could hide the detail rows but these rows still appear without any value in the key figure fields.
I tried to revove the characteristic field from the drilldown but it doesn't show the report correctly. Then I tried to write a condition to filter the detail rows but this condition doesn't apply to the result rows so this effort also didn't work for me.
Is there anyway we can display the report with only the result rows ? I've already tried to find out a solution on SDN but couldn't get the solution eventhough I found many posts on this kind of requirement.
Any help would be greatly appreciated.
Thanks
Alok

Please explain when you say
"I tried to remove the characteristic field from the drill down but it doesn't show the report correctly"
What is problem there? What result do you get. If possible please provide details of columns layout and few numbers

Activity reports showing only UME users

Hi,
Activity reports showing only the status of UME users. It is not showing the status of the users coming from LDAP.
Will there be any additional settings needed for this. Can anyone give me the step by step full details of the activity reports cofiguration settings.
Raghu

Hi Raghu,
What kind of report are you talking about?
General information for How the Portal Activity Report Works :
http://help.sap.com/saphelp_nw70/helpdata/EN/b5/c652070d474533a18a930112a4b926/frameset.htm
Viewing Activity Reporting Status :
http://help.sap.com/saphelp_nw70/helpdata/EN/08/242f423d09f750e10000000a155106/frameset.htm
Regards
Victoria Gur
SAP IBD

Interactive Report Downloads only showing Column Headings

I have an Interactive Report that is selecting more than 100 columns. I set the defulat to only show a few of the columns (the rest are dedaulted to not show). When I try the download option (pdf, rtf etc.) , it only shows the column headers (no data). The download works when you originally create the Report region with the SQL statement. It seems to break as soon as you do the 'Save Report' - 'As default Report Settings'. Anybody seen this before? It is a bug?

Hi,
You are almost right place. You need click icon before 100th column name, order to go screen where you can edit column attributes.
In that screen right top is buttons (Cancle, Apply, < and >)
Regards,
Jari
Edited by: jarola on Jul 21, 2011 5:43 PM
It might documentation guides you to right screen
http://download.oracle.com/docs/cd/E14373_01/appdev.32/e11838/app_comp.htm#sthref978
>
To access Column Attributes:
1. On the Workspace home page, click the Application Builder icon.
2. Select the application.
3. Select a page. The Page Definition appears.
4. Under Regions, click Interactive Report next to the name of the report region you want to edit.
The Interactive Report Attributes page appears with the Column Attributes section at the top of the page.
5. To access the Column Attributes page, click the Edit icon next to the appropriate column Alias.
>
Edited by: jarola on Jul 21, 2011 5:44 PM

Web part created on a subsite for a sharepoint list in another site using sharepoint designer, to show only the subsite's reports. Connection dropping off and showing all the reports

I crated web parts in the sub-sites (we have about 10 subsites) using sharepoint designer from a main list in another site. Then used web part to show only the ubsite's reports - using connection to the main list. Problem is, the connection
is dropping off and showing all the reports on the main list that are confidential. this has happened 3 time lately. Could someone explain why it happens some times? I had to fix it by adding the web part again and connecting it
Thanks, Subathy.

Hi George,
If you want to use a top level site "department" list column in all sub-sites, you can go to top level site and create a
lookup type "Site column" to look up the value from the department list, then all sub-sites can use this lookup type site column created in top level site.
Thanks
Daniel Yang
TechNet Community Support

Only the top row of buttons works on the aluminun wireless keyboard

After returning my first wireless keyboard for not pairing with my iMac (which has all the right tech specs) I exchanged it for a new one. Initially, I was able to type letters and numbers only and many of the keys were not doing the task they were supposed to--the F12 keys ejected CDs and the eject button did nothing. I went to the Apple icon and downloaded all of the new updates that showed up, restarted my computer and then suddenly, the eject button worked! But, when I tried to type letters and numbers, nothing happened. My computer recognizes it and the top row of buttons works just fine.

the same has happend to me, it's a new wireless keyboard, and from the moment i paired them only the to row (f1,f2....eject) buttons are working.
what am i to do

Recovery Point Status Report Shows Only One Day

Hello. Our Recovery Point Status Report showed us the last five days until about a month ago and now it only shows us one day. Just happened over a week-end when there was nothing changed on the server. We appear to have recovery points that go back
a week and the recovery point status is set to a month. We are running System Center 2012 R2 DPM.
Any help is appreciated, thank you for your time.
g

Hi,
Check your status report granularity settings for each protection group and make sure it's set for 1 day instead of weekly.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

How to show only the result of a query

Hi experts,
i need to show only the result of a query (hiding all the rows)
according to mathematical functions like sum, average, count ets. i need the result to be shown widhwise the query (Horizontal)
thanks a lot
Nir

Hi
I did get exactly.....but if i m right then you can do this by selecting the keyfigure goto the calculation tab select calculate result as sum or whatever you want to use.
Regards
Lalit k Tyagi

How to show only the result line of a Query result ?

Hi Experts,
I want to show only the result line of the Query. Is this possible in query Designer ?
In BeX Workbook, I can hide the rows but they grow or shrink dynamically and hence it is unpredictable how many rows to suppress.
If you have any solutions/workarounds, please reply !
Rekha

VBA coding can be used to display just the Result rows.
Somthing like this - modify as needed.
This scans the range of query results looking to find the last row, then checks those rows to see if the word Result is found or not, deleting (or you could just hide) the detail rows. There is also a LEAF option in BEx Boolean options that returns a 1 or 0 depending on whether a row is a detail or result that could also be used to hide rows rather than looking for the presence of "Result" in a particular column
Sub SAPBEXonRefresh(queryID As String, resultArea As Range)
For rownum = 17 To 64000 Step 1
' col 2 is the Total Result, col 3 is the User Group result
If Cells(rownum, 2) = "" And Cells(rownum, 3) = "" Then
lastrow = rownum - 1
Exit For
End If
Next
For rownum = lastrow To 17 Step -1
If Cells(rownum, 2) = "Result" Or Cells(rownum, 3) = "Result" Then
Rows(rownum).Hidden = False
Else
' Rows(rownum).Hidden = True
Rows(rownum).EntireRow.Delete
End If
Next
End Sub

Show Only First N Rows in SAP Design Studio Chart/Table

Hi,
Is it possible to show only first N rows of data in SAP Design Studio Charts/Cross Tab ?
Eg
Bex Query Output
Here If I mention First 2 rows, my chart looks like below
If I mention First 4 rows, my chart looks like below
Thanks
Anil

Hi Mustafa,
Thanks for your reply.
Actually our requirement is, we have one Bex Query where we are using Ranking Function.
We have 15 customers, and we need to know the ranking based on some calculations.
Whenever we execute the query with different time periods, the ranking of Customers will vary, for example if I execute query for year 2014, customer 1 can be Rank 1, If I execute for year 2013, Customer 7 can be Rank 1.
From this Query I need to show only Top 5 Customers in Cross Tab/Chart.
We tried to put condition on CY Ranking in Bex to show only Top 5, but the result was giving some diff customers and also for all Time periods we are getting same Customers In Top 5.
To overcome this, we thought instead of putting condition on Bex side, we are trying to pick only first 5 rows from Bex Query and show them in Chart/Cross Tab, something like we will map only first 5 rows in Xcelcius.
We would like to know is there any functionality in Design Studio to show only first 5 rows of data.
Regards,
Anil

Make only the new row in a table editable and other rows display mode.

Hiii all,
I am working on the component GSWISET, there is a table view for substitutes, the requirement is to show all the rows in the table view in display mode. Whenever the user clicks the button (Add employee), a search popup triggers and the user selects an employee from that and it will come as a new row in the table view. Here I need to be able to make only the new row editable and all the other rows in display mode.
Could you please suggest a way to achieve this. Thanks for your time..

Hi,
Try with the code below in.htm page
data: lv_displaymode TYPE string.
IF controller->view_group_context->is_view_in_display_mode( controller ) = abap_true.
    lv_displaymode = 'X'.
ELSE.
    lv_displaymode = ' '.
ENDIF.
if lv_displaymode = 'X'.
<chtmlb:tableExtension tableId = "Substitutes"
                       layout = "FIXED" >
<chtmlb:configTable actions               = "<%= controller->gt_button %>"
                      id                    = "Substitutes"
                      onRowSelection        = "select"
                      selectedRowIndex      = "<%= substitutes->SELECTED_INDEX %>"
                      selectedRowIndexTable = "<%= substitutes->SELECTION_TAB %>"
                      table                 = "//Substitutes/Table"
                      width                 = "100%"
                      selectionMode         = "<%= substitutes->selection_mode %>"
                      visibleFirstRow       = "<%= substitutes->VISIBLE_FIRST_ROW_INDEX %>"
                      usage                 = "ASSIGNMENTBLOCK"
                      headerText            = "<%= controller->gv_header_text %>" />
</chtmlb:tableExtension>
else.
<chtmlb:tableExtension tableId = "Substitutes"
                       layout = "FIXED" >
<chtmlb:configTable actions               = "<%= controller->gt_button %>"
                      id                    = "Substitutes"
                      onRowSelection        = "select"
                      selectedRowIndex      = "<%= substitutes->SELECTED_INDEX %>"
                      selectedRowIndexTable = "<%= substitutes->SELECTION_TAB %>"
                      table                 = "//Substitutes/Table"
                      width                 = "100%"
                      selectionMode         = "<%= substitutes->selection_mode %>"
                      allRowsEditable       = "TRUE"
                      visibleFirstRow       = "<%= substitutes->VISIBLE_FIRST_ROW_INDEX %>"
                      usage                 = "EDITLIST"
                      headerText            = "<%= controller->gv_header_text %>" />
</chtmlb:tableExtension>
endif.
Regards,
Gangadhar.S
Edited by: gangadhar rao on Dec 24, 2010 12:49 PM

Refreshing only the single row of ADF Table

Hi All,
I have a webcenter application where the ADF Applications has been deployed.Now the Data is coming onto the ADF Tables from a webservice.In that particular table i need to refresh only the single row(whichever selected by the user to edit ) or even a particular field with the updated values as well as need to validate and to create a message box saying about the errors if the validation goes wrong.
Please suggest!!

Hi,
if "updated value" mean that the value got changed on the middle tier (not the browser client) then the update requires the table to be partially refreshed. If the user edits a row and in this row has dependent fields, then this can be achieved by partially refreshing the column. Note that ADF Faces tables don't refresh just one cell
Frank

Cannot display the screen of the macbook on TV. OS is Lion 10.7.2. Connection to the TV is over HDMI cable. TV shows only the backgroud picture of Lion. Do you have any suggestions for help ?

Cannot display the screen of my macbook on TV. OS is Lion 10.7.2. The Macbook is connected to the TV is over HDMI cable. TV shows only the backgroud picture of the Lion OS and reacts even to mission control. Do you have any suggestions for help ?

You have the display set in Extended Desktop mode. In System Preferences>Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the TV and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will make the second monitor your main screen. You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse. http://support.apple.com/kb/HT3131 When you disconnect from the TV your Menu Bar will automatically change back to the MacBook.
Or if you want to work on the MacBook screen while showing it on a TV you can check the Mirror Display box on the lower left hand side of the Arrangement tab under the two monitors box.

I have several pdfs on my iPad in iBooks. My iPhone shows only the categories, none of the documents. How can I get my iPhone to also show the documents that are on my iPad?

I have several pdfs on my iPad in iBooks. My iPhone shows only the categories, none of the documents. How can I get my iPhone to also show the documents that are on my iPad?

You will need to connect your iPad to your computer's iTunes and do File > Devices > Transfer Purchases to copy them over to your computer (that will copy PDFs and epubs that are in the iBooks app, not just actual ibooks), and you can then sync them to your iPhone. Or you might be able to open each PDF in iBooks on your iPad and use the share icon to email them to yourself and then use 'open in' in the Mail app on your iPhone to copy them to its iBooks app (if the PDF is protected then you may not get the email option via the share icon).
The Settings > iBooks > Sync Collections setting doesn't copy items between devices, it just means that it a bookor PDF is on both devices and you move it into a collection on one device then it will be moved into the same collection on the other device

Interactive report showing only the aggregation rows

Similar Messages

Maybe you are looking for