Interactive Report with 2 tables

I want to create an Interactive Report (and Form) based on 2 tables which are joined together with FK_MODULE from FORM table 2 PK_ID from MODULE table.
Do I just edit the SQL that got created from the wizard (which only asked for 1 table) to display the appropriate description (instead of primary key) or is there another way to creat a list of values like in a form?
FORM
PK_ID
FORM_CODE
FK_MODULE
MODULE
PK_ID
MODULE
DESCRIPTION

Hi Bob,
Interactive Report is not so much different than how you would do it in a normal report.
You can change the sql, if you don't know how to do a join in sql, use the Query Builder.
You can also create a view first and base the Interactive report on that.
Regards,
Dimitri
-- http://dgielis.blogspot.com/
-- http://apex-evangelists.com/
-- http://apexblogs.info/

Similar Messages

Interactive reports with alv

Hi,
i just wanted to know how to create interactive reports with check box and whether we can use av with interactive reports.

hi,
this the code for interactiv ALV
*& Report ZINT_ALV
REPORT zint_alv.
TYPE-POOLS:slis.
TABLES:mara,
       makt,
       mseg.
DATA:BEGIN OF itab OCCURS 0,
      matnr LIKE mara-matnr,
      maktx LIKE makt-maktx,
     END OF itab.
DATA:BEGIN OF itab1 OCCURS 0,
      mblnr LIKE mseg-mblnr,
      menge LIKE mseg-menge,
      meins LIKE mseg-meins,
      werks LIKE mseg-werks,
     END OF itab1.
DATA:BEGIN OF itab2 OCCURS 0,
      mblnr LIKE mseg-mblnr,
      budat LIKE mkpf-budat,
     END OF itab2.
DATA:fcat TYPE slis_t_fieldcat_alv,
     fcat1 TYPE slis_t_fieldcat_alv,
     fcat2 TYPE slis_t_fieldcat_alv,
     eve TYPE slis_t_event,
     eve1 TYPE slis_t_event.
DATA:t_mat LIKE mara-matnr,
     t_doc LIKE mseg-mblnr,
     s_mat LIKE mara-matnr,
     g_repid LIKE sy-repid,
     subtot TYPE slis_t_sortinfo_alv,
     g_subtot LIKE LINE OF subtot.
SELECTION-SCREEN:BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:mat FOR mara-matnr OBLIGATORY.
SELECTION-SCREEN:END OF BLOCK blk1.
INITIALIZATION.
PERFORM build_fcat USING fcat.
PERFORM build_eve.
START-OF-SELECTION.
PERFORM get_data.
PERFORM dis_data.
*&      Form build_fcat
      text
     -->T_FCAT     text
FORM build_fcat USING t_fcat TYPE slis_t_fieldcat_alv.
DATA:wa_fcat TYPE slis_fieldcat_alv.
wa_fcat-tabname = 'ITAB'.
wa_fcat-fieldname = 'MATNR'.
wa_fcat-ref_fieldname = 'MATNR'.
wa_fcat-ref_tabname = 'MARA'.
wa_fcat-seltext_m = 'Material'.
wa_fcat-input = ' '.
wa_fcat-edit = 'X'.
wa_fcat-input = 'X'.
wa_fcat-key = 'X'.
APPEND wa_fcat TO t_fcat.
CLEAR wa_fcat.
wa_fcat-tabname = 'ITAB'.
wa_fcat-fieldname = 'MAKTX'.
wa_fcat-seltext_m = 'Description'.
APPEND wa_fcat TO t_fcat.
CLEAR wa_fcat.
ENDFORM.                    "build_fcat
*&      Form build_eve
      text
FORM build_eve.
DATA:t_eve TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
   EXPORTING
     i_list_type           = 0
   IMPORTING
     et_events             = eve
EXCEPTIONS
LIST_TYPE_WRONG       = 1
OTHERS                = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    "build_eve
*&      Form get_data
      text
FORM get_data.
SELECT maramatnr maktmaktx INTO CORRESPONDING FIELDS OF TABLE itab
FROM mara INNER JOIN makt
ON maramatnr = maktmatnr
WHERE mara~matnr IN mat.
ENDFORM.                    "get_data
*&      Form dis_data
      text
FORM dis_data.
g_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
     i_callback_program                = g_repid         "'ZINT_ALV'
     i_callback_user_command           = 'USER_COMMAND'
     i_grid_title                      = 'Interactive ALV'
     it_fieldcat                       = fcat
     it_events                         = eve
    TABLES
      t_outtab                          = itab
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    "dis_data
*&      Form user_command
      text
     -->U_COM      text
FORM user_command USING u_com LIKE sy-ucomm sel_field TYPE slis_selfield.
CLEAR fcat1.
CASE u_com.
    WHEN '&IC1'.
      READ TABLE itab INDEX sel_field-tabindex.
      IF sel_field-fieldname = 'MATNR'.
        IF sy-subrc = 0.
          t_mat = itab-matnr.
          PERFORM build_cat1 USING fcat1.
          PERFORM build_eve1.
          PERFORM get_data1.
          PERFORM dis_data1.
        ENDIF.
      ENDIF.
     SET PARAMETER ID 'MAT' FIELD t_mat.
     CALL TRANSACTION 'MM03' AND SKIP FIRST SCREEN.
ENDCASE.
ENDFORM.                    "user_command
*&      Form build_fcat1
      text
     -->T_FCAT1    text
FORM build_cat1 USING t_fcat1 TYPE slis_t_fieldcat_alv.
DATA:wa_fcat1 TYPE slis_fieldcat_alv.
wa_fcat1-tabname = 'ITAB1'.
wa_fcat1-fieldname = 'MBLNR'.
wa_fcat1-seltext_m = 'Material Doc.'.
APPEND wa_fcat1 TO t_fcat1.
CLEAR wa_fcat1.
wa_fcat1-tabname = 'ITAB1'.
wa_fcat1-fieldname = 'MENGE'.
wa_fcat1-seltext_m = 'Quantity'.
wa_fcat1-do_sum    = 'X'.
APPEND wa_fcat1 TO t_fcat1.
CLEAR wa_fcat1.
wa_fcat1-tabname = 'ITAB1'.
wa_fcat1-fieldname = 'MEINS'.
wa_fcat1-seltext_m = 'UOM'.
APPEND wa_fcat1 TO t_fcat1.
CLEAR wa_fcat1.
wa_fcat1-tabname = 'ITAB1'.
wa_fcat1-fieldname = 'WERKS'.
wa_fcat1-seltext_m = 'Plant'.
APPEND wa_fcat1 TO t_fcat1.
CLEAR wa_fcat1.
g_subtot-spos = 1.
g_subtot-fieldname = 'MBLNR'.
g_subtot-tabname = 'ITAB1'.
g_subtot-up = 'X'.
g_subtot-group = 'X'.
g_subtot-subtot = 'X'.
g_subtot-expa = 'X'.
APPEND g_subtot TO subtot.
g_subtot-spos = 2.
g_subtot-fieldname = 'MENGE'.
g_subtot-tabname = 'ITAB1'.
g_subtot-up = 'X'.
g_subtot-group = 'X'.
g_subtot-subtot = 'X'.
g_subtot-expa = 'X'.
APPEND g_subtot TO subtot.
ENDFORM.                    "build_fcat1
*&      Form build_eve1
      text
FORM build_eve1.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      i_list_type     = 0
    IMPORTING
      et_events       = eve1
    EXCEPTIONS
      list_type_wrong = 1
      OTHERS          = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                                                    "build_eve1
*&      Form get_data1
      text
FORM get_data1.
SELECT mblnr menge meins werks FROM mseg
INTO CORRESPONDING FIELDS OF TABLE itab1
WHERE matnr = t_mat.
ENDFORM.                                                    "get_data1
*&      Form dis_data1
      text
FORM dis_data1.
g_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
     i_callback_program                = g_repid              "'ZINT_ALV'
     i_callback_user_command           = 'USER_COMMAND1'
     it_fieldcat                       = fcat1
     it_events                         = eve1
     i_save                            = 'A'
     it_sort                            = subtot
    TABLES
      t_outtab                          = itab1
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                                                    "dis_data1
*&      Form user_command1
      text
     -->U_COM1     text
     -->SEL_FIELD text
FORM user_command1 USING u_com1 LIKE sy-ucomm sel_field TYPE slis_selfield.
CASE u_com1.
    WHEN '&IC1'.
      READ TABLE itab1 INDEX sel_field-tabindex.
      IF sy-subrc = 0.
        t_doc = itab1-mblnr.
        PERFORM build_cat2 USING fcat2.
        PERFORM get_data2.
        PERFORM dis_data2.
      ENDIF.
ENDCASE.
ENDFORM.                    "user_command
*&      Form build_cat2
      text
     -->P_FCAT1 text
FORM build_cat2 USING    t_fcat2 TYPE slis_t_fieldcat_alv.
DATA:wa_fcat2 TYPE slis_fieldcat_alv.
wa_fcat2-tabname = 'ITAB2'.
wa_fcat2-fieldname = 'MBLNR'.
wa_fcat2-seltext_m = 'Material Doc.'.
APPEND wa_fcat2 TO t_fcat2.
CLEAR wa_fcat2.
wa_fcat2-tabname = 'ITAB2'.
wa_fcat2-fieldname = 'BUDAT'.
wa_fcat2-seltext_m = 'Material Date'.
APPEND wa_fcat2 TO t_fcat2.
CLEAR wa_fcat2.
ENDFORM.                    " build_cat2
*&      Form get_data2
      text
--> p1        text
<-- p2        text
FORM get_data2 .
SELECT mblnr budat FROM mkpf
    INTO CORRESPONDING FIELDS OF TABLE itab2
    WHERE mblnr = t_doc.
ENDFORM.                                                    " get_data2
*&      Form dis_data2
      text
--> p1        text
<-- p2        text
FORM dis_data2 .
g_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
     i_callback_program                = g_repid              "'ZINT_ALV'
     it_fieldcat                       = fcat2
     i_save                            = 'A'
    TABLES
      t_outtab                          = itab2
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                                                    " dis_data2
reward if useful...

Can i have a sample BSP INTERACTIVE Reports with step by step.

Hi Friends,
Can i have a sample BSP INTERACTIVE Reports with step by step.
Moosa

Hello,
Please find the sample Code below.
FIRST PAGE
Layout Code.
<htmlb:label for="emp" text="Employee id" width="10"/>
      <htmlb:inputField id="emp" value="<%= w_input1%>"/>
      <p>
<htmlb:label for="Employee Details"/>
       <htmlb:button   id = 'get'
                       text = 'Display'
                       on Click = 'OnInput Processing' />   <p>
<h1>Employee Details</h1>
<htmlb:tableView id="Employee"
                 table="<%= ZTABLE%>" <- Give the table name
                 selectionMode = "lineEdit"
                 design="ALTERNATING">
ONINITILIZATION EVENT.
data:
fs_yhtable like line of TABLE.
    select * from yhtable into table ZTABLE.
ONINPUT PROCESSING CODE:
* event handler for checking and processing user input and
* for defining navigation
class cl_htmlb_manager definition load.
case event_id.
when cl_htmlb_manager=>event_id.
data: event type ref to if_htmlb_data,
        fs_yhtable like line of t_yh1205,
        selrow type ref to cl_htmlb_tableview.
event = cl_htmlb_manager=>get_event_ex( request ).
selrow ?= cl_htmlb_manager=>get_data( request = request
                                        name    = 'tableView'
                                        id      = 'Employee' ).
data: tv_data type ref to cl_htmlb_event_tableview,
         t_tab type int4_table.
*        tv_data1 type ref to cl_htmlb_event_tableview.
tv_data = selrow->data.
   t_tab = selrow->selectedrowindextable.
if event is not initial
and event->event_name = 'tableView'.
    w_int = tv_data->rowselection.
    navigation->set_parameter( 'Employee' ).
    navigation->set_parameter( name = 'w_int'
                               value = w_int ).
    navigation->set_parameter( name = 'table'
                               value = table ).
    navigation->goto_page( 'second.htm' ).
endif.
endcase.
SECOND PAGE CODE:
LAYOUT CODE:-
<htmlb:content design="design2003">
<htmlb:page title = "Employee Details">
    <htmlb:form>
<h1>Employee Details</h1>
<htmlb:tableView id="Employee"
                 table="<%= t_yh1205%>"
                 selectionMode = "lineEdit"
                 design="ALTERNATING">
</htmlb:tableView>
    </htmlb:form>
</htmlb:page>
</htmlb:content>
Hope this is helpful.Let me know if you need any more help.
Thanks
kalyan

Interactive Report with PL/SQL Function Source

Is it possible to create interactive report with PL/SQL function source returing a query? If not, has anyone done any work to simulate the interactive reporting feature for a normal report using API?

I haven't tried that before but you could:
1. create a collection from your result set returned by a dynamic query,
2. create a view on that collection,
3. use the view in your interactive report.
The usability of this proposal depends from a question how "dynamic" your query is - does it always have the same number of columns or not.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

Interactive Report with Null Columns

I've got a user who wants to export an interactive report, and he needs certain columns to appear on the export for him to fill the data in later (this is an intermediate step, while we work on getting all the data he needs in to the database). I've created the report query, and there are a handful of null/empty columns (to preserve the correct order for the export). When I try to add this query to APEX in an interactive report, I get a "ORA-00001: unique constraint (APEX_040000.WWV_FLOW_WORKSHEET_COLUMNS_UK2) violated" error.
Googling around shows me that this happens because of similarly-named columns, and the solution is to provide aliases to all columns. My report has aliases on all columns, but I still cannot create an interactive report. I've tried changing the null columns to empty strings, as well as enclosing the aliases in double-quotes, but nothing works. I can however use my original query to create a standard report, but due to the export requirement, this isn't ideal.
I was able to create the interactive report with one null column, and then edited the report source to add in the others. This had to be done one at a time, since trying to add multiple null columns at the same time gives the same error again. Unfortunately, when I try and run the page, I get an "ORA-20001: get_dbms_sql_cursor error ORA-00918: column ambiguously defined" error.
My original query:
select customer.customer_name as customer,
       project.name as project_name,
       trunc(project.estimated_end_dt) as due_date,
       project_status.project_status_desc as status,
       null as revenue,
       project.baseline_effort as baseline_hours,
       null as projected_cost,
       null as est_gain_loss,
       project.actual_hours as actual_hours,
       project.estimated_hours as projected_hours,
       null as projected_cost,
       null as projected_gain_loss,
       null as roi
    from project,
         customer
where customer.customer_id = project.customer_id
and project.inactive_ind = 0
and project.customer_id is not null
and project.estimated_end_dt >= :DTP_P50_STARTDT
and project.estimated_end_dt <= :DTP_P50_ENDDT
order by customer.customer_name,
         project.estimated_end_dt;             Can someone tell me a way to create an interactive report with multiple null columns?

Hi shimmoril,
The problem is likely that you have two columns aliased as "projected_cost" (7th column and 11th column).
Hope this helps,
John
If you find this information useful, please mark the post "helpful" or "correct" so that others may benefit as well.*

Interactive Report with union all in the query

I have an interactive report with the following query in the report region:
select property,saddr1,upostdate,sotherdate1,journal_control-1000000000,account,sdesc,uref,
suserdefined1,trans_notes,samount,detail_notes
from journal_entries
union all
select property,saddr1,upostdate,sotherdate1,journal_control-700000000,account,sdesc,uref,
suserdefined1,trans_notes,stotalamount,detail_notes
from charge_entries;
This gets translated as listed below during runtime. I am trying to pass a value to both SELECT statements instead of the just the bottom select statement. Is this possible using interactive reports.
select
PROPERTY,
SADDR1,
UPOSTDATE,
SOTHERDATE1,
ACCOUNT,
SDESC,
UREF,
SUSERDEFINED1,
TRANS_NOTES,
SAMOUNT,
DETAIL_NOTES,
"JOURNAL_CONTROL-1000000000" "JOURNAL_CONTROL-1000000000"
from (
select property,saddr1,upostdate,sotherdate1,journal_control-1000000000,account,sdesc,uref,
suserdefined1,trans_notes,samount,detail_notes
from journal_entries
union all
select property,saddr1,upostdate,sotherdate1,journal_control-700000000,account,sdesc,uref,
suserdefined1,trans_notes,stotalamount,detail_notes
from charge_entries
) r
where ("PROPERTY" = :APXWS_EXPR_1)
0.14: IR binding: ":APXWS_EXPR_1"="APXWS_EXPR_1" value="prop1"
Thanks for any help,
Jim

The bottom query is actually the third query, it encompasses the two that are unioned. It is generated by APEX to allow for the search facility - to achieve what you want ignore the larger query, and get your query working in something like SQL developer. Once it's working then put it into APEX, and the search wrapper will be generated.
select property,saddr1,upostdate,sotherdate1,journal_control-1000000000,account,sdesc,uref,
suserdefined1,trans_notes,samount,detail_notes
from journal_entries
where property = :YOUR_CRITERIA
union all
select property,saddr1,upostdate,sotherdate1,journal_control-700000000,account,sdesc,uref,
suserdefined1,trans_notes,stotalamount,detail_notes
from charge_entries
where property = :YOUR_CRITERIA;
Then you need to think about how you are using the report, if it is linked to from another report, then create a hidden variable and pass it from the parent.
If the report is standalone , then you could create an item , that can be edited and when submitted, re-executes the report based on the criteria entered.
Steve
Hot and bothered in sunny Dubai

Interactive Report with specific rows editable

I have an interactive reports, with the edit (pencil) link to a maintenance form. I only want the link to show for specific records in the reports. Can you put a condition in the link column to the pencil for certain records?
If so, how can you access the value of the field? ie. I need to check the value of 'USER_NAME' in the select below against :APP_USER
select A.pk_id as "PK_ID",
A.fk_sis_user as "FK_SIS_USER",
A.list_name as "LIST_NAME",
A.list_description as "LIST_DESCRIPTION",
B.user_name as "USER_NAME",
A.creation_date as "CREATION_DATE"

Not exactly what you are asking for, but it may give you an idea hot to create conditional
icon and link.
From always excellent examples from Denes Kubicek:
http://apex.oracle.com/pls/otn/f?p=31517:23:3086073313243153::NO
HTH
Thomas

Interactive report with pagination

Hi,
i have create an interactive report with pagination .i have follow instraction form
[http://dbswh.webhop.net/apex/f?p=BLOG:READCAT:0::::CATEGORY:10800346812869]
i have put JQuary in Page HTML HEADER .
Now it show me that code in header in my page .No value in my pagination select list.
How can i solve this problem.
Thanks

Hi friends,
i have sort out that problem,
i have jus put JQuary code in JavaScript Section.
Thanks

Using Interactive Report with SQL query accessing tables via db link

Is there a known issue with using the interactive report in version 3.1.2.00.02 with SQL that is accessing tables via a database link? I get the error 'not all variables bound', I do not get this error when using the standard report for the same SQL?
Thanks,
Edited by: [email protected] on May 26, 2009 2:59 PM

Varad,
Good question, failed to check that. In fact there are errors. Dump file c:\oraclexe\app\oracle\admin\xe\bdump\xe_s002_3640.trc
Mon Jun 15 08:48:11 2009
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
Windows XP Version V5.1 Service Pack 3
CPU : 2 - type 586, 1 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:1051M/2038M, Ph+PgF:2273M/3934M, VA:1302M/2047M
Instance name: xe
Redo thread mounted by this instance: 1
Oracle process number: 16
Windows thread id: 3640, image: ORACLE.EXE (S002)
*** ACTION NAME:(PAGE 2) 2009-06-15 08:48:11.743
*** MODULE NAME:(APEX:APPLICATION 112) 2009-06-15 08:48:11.743
*** SERVICE NAME:(SYS$USERS) 2009-06-15 08:48:11.743
*** CLIENT ID:(ADMIN:232384011651572) 2009-06-15 08:48:11.743
*** SESSION ID:(24.931) 2009-06-15 08:48:11.743
*** 2009-06-15 08:48:11.743
ksedmp: internal or fatal error
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [_LdiDateFromArray+55] [PC:0x608B04F3] [ADDR:0x0] [UNABLE_TO_WRITE] []
Current SQL statement for this session:
select Stage,Procedure,Stp,FW,Reslt,MSG,date_run
from bi_msg_VW@dwitnm
order by 1
----- PL/SQL Call Stack -----
object line object
handle number name
2FE1EA14 1207 package body SYS.DBMS_SYS_SQL
2FE1F064 328 package body SYS.DBMS_SQL
2ABDC520 5097 package body APEX_030200.WWV_RENDER_REPORT3
2BD5E55C 1538 package body APEX_030200.WWV_FLOW_DISP_PAGE_PLUGS
2BD5E55C 366 package body APEX_030200.WWV_FLOW_DISP_PAGE_PLUGS
335BDA88 11190 package body APEX_030200.WWV_FLOW
2BDBD1C8 255 procedure APEX_030200.F
2AB58D10 30 anonymous block
----- Call Stack Trace -----
I didn't include the call stack, it is too large. Now I'm even more puzzled that the IR would work while a sql report would fail.
Bob

Interactive report with checkbox and editable field

Hi,
For a project I'm working on I need to create a interactive report in Apex 3.2 with the ability to select lines and to modify one of the columns in the report.
To do this, I started off by adding these two fields to the selection query of my IR:
apex_item.checkbox(1, product_number) cb
and
apex_item.text (2,QTY_TO_ORDER) QTY_TO_ORDER
cb is the checkbox files, and QTY_TO_ORDER is the editable field.
That worked like a charm and I got my two fields in the report.
To process the values, I added this page process, wich for now should only store the "product number" and "QTY_TO_ORDER" fields in a table.
BEGIN
FOR i in 1..APEX_APPLICATION.G_F01.count LOOP
insert into mytmptable values (APEX_APPLICATION.G_F01(i),APEX_APPLICATION.G_F02(i));
END LOOP;
commit;
end;
However, this doesn’t work the way I want it to work. When I check the checkboxes of two rows, it will store two rows with the right product numbers, but it will take the top two QTY_TO_ORDER field of the table regardless of which ones are checked. I was able to solve this problem, by adding a rownum to the query and using the rownum as the value for the checkbox. Since I still need the product_number and qty_to order fields I made them both text fields.
I changed my page process to:
BEGIN
FOR i in 1..APEX_APPLICATION.G_F01.count LOOP
insert into mytmptable values (APEX_APPLICATION.G_F02(APEX_APPLICATION.G_F01(i)),
APEX_APPLICATION.G_F03(APEX_APPLICATION.G_F01(i)));
END LOOP;
commit;
end;
This seemed to solve the problem, and I now got the right values in the table, unless I used sorting in the report... As soon as I sorted the report in a way different than by rownum, I got the wrong values in the table. The reason for this is of course that my insert just selects the nTh row from the table, and my rownums aren't dynamic.
I've found a lot of examples on the internet using '#ROWNUM#' in the selection, which should dynamically generate a rownum in the report. This seems to work in normal report, but in a interactive reports, the literal values '#ROWNUM#' shows up.
Is there any way to solve this issue?

Hi,
Try with 3 fields:
apex_item.checkbox(1, product_number) cb,
apex_item.text (2,QTY_TO_ORDER) QTY_TO_ORDER,
apex_item.hidden(3, product_number) prod_no
The hidden field should be display as a hidden column.
Then your process can be:
BEGIN
FOR i in 1..APEX_APPLICATION.G_F01.count LOOP
FOR j in 1..APEX_APPLICATION.G_F03.count LOOP
IF APEX_APPLICATION.G_F01(i) = APEX_APPLICATION.G_F03(j)) THEN
insert into mytmptable values (APEX_APPLICATION.G_F01(i),APEX_APPLICATION.G_F02(j));
exit;
END IF;
END LOOP;
END LOOP;

Interactive report with detail sub-report on the same page

Hi all,
I'm fairly new to APEX, sorry if my question is too obvious. I'm using Apex 4.0.2 on top of Oracle 11.2.
I have an interactive report listing the content of a table. Since there are many columns in that table I would the report to show only a few identifying columns and the complete record currently selected being displayed using another report in a separate region on the same page.
The "Link Column" on the interactive report does almost that except that it jumps on another page; I would like to simply have a sub-report updated with the selected data instead of a new page displayed. Does anyone know how to do that?
Thanks for your help,
Chris

Chris,
this sounds like what I normally do in my referential data.
I use the wizard to create "form with report"
I make sure that both regions (the form and the report) will be set on the same page number
then I check/change the order of the regions (report first, form second)
then I set the form to display in column 2
regards,
Richard
P.S. the report only shows enough columns to recognize the records. the form shows all records

Interactive report with named lov

Hello,
Is there a way to use a named lov (a static one in my case) in an interactive report?
When not using an interactive report, this is possible and i can't figure out why oracle would not allow this in an interactive report.

Hi Jan,
I can't say for certain why it's not available to use. I imagine that, for some reason, it would interfere with the IR functionality in someway or, that the tables used for IRs just can't handle anything more than simple columns yet. You should add a request to the Enchancement thread Re: Enhancement Request Thread : Post 3.1
Andy

Interactive Report with Select List LOV's

Hi All -
I need to develop an Interactive Report which displays reports based on values selected from a select list (LOV's) on this IR report.
Following is what I am working on.
This page has 2 select lists with the corresponding LOV values:
Date From ==> Q1, 2010
Q2, 2010
Q3, 2010
Q4, 2010
Date To ==> Q1, 2010
Q2, 2010
Q3, 2010
Q4, 2010
When the user visits this report page first time, "Date From" and "Date To" select lists have null values and the report should display all the records.
Once the user selects values from "Date From" and "Date To" select lists then the report should be filtered based on the values selected i.e.
If the user selects *"Date From"* ==> Q1, 2010 and *"Date To"* ==> Q3, 2010, then the report should show all the records whose reporting period falls between "Jan 1, 2010" to "Sept 30, 2010" i.e Q1-Q3 2010 only.
And the Reporting date format stored in the table is "18-OCT-2010", "12-APR-2010" etc ....
How can this be achieved. Please share your expertise.
Thanks,
-Seenu

Hi,
First Create 2 Select List with List Of Queries in LOV Region like
+'STATIC2:Q1-2010;01-Jan-2010,Q2-2010;01-Apr-2010,Q3-2010;01-Jun-2010,Q4-2010;01-Oct-2010'+ in Date From List lets name it P10_DF and
+'STATIC2:Q1-2010;31-Mar-2010,Q2-2010;30-Jun-2010,Q3-2010;30-Jun-2010,Q4-2010;31-Dec-2010'+ in Date To List P10_DT.
(Enable Display Null Value on both the select list)
Then Now in the Report Source add Where Query some thing like
select FIELD1,FIELD2 from TBL_REPORTS where Report_Date>=NVL( *:P10_DF* ,'01-Jan-2010') and Report_Date<=NVL( *:P10_DT* ,'31-Dec-2010')
And also create a button to submit the values
NOTE: This is not tested but this is how i will come about it in the specified scenario. You can try this and post the results...
Good Luck.
Regards,
Afsar

Interactive Report With No Column Heading

Is it possible to display a column with no heading (label) in an interactive report ?
I have tried to delete the column heading and save, but when I run the report,
it is still there
Cheers
Gus

Gus,
Try a space character or &nbsp;
Vikram

Is it possible to sort an interactive report with a default column ?

Hi,
I have a nice request used with an interactive report.
select "ID",
"DATE_CREATION",
"SERVICE",
"RESPONSABLE",
"NATURE_CONTRAT",
"SOCIETE",
"DATE_DEBUT",
"DATE_FIN",
"DELAI_RENOUVELLEMENT"
from "#OWNER#"."CONTRATS_MAINTENANCE"
order by DATE_FIN descUnfortunately, the interactive report does not displays using the order into the SLQ query.
I tried to de select the "sort" option of each other columns into the Column attributes Section, but without any improvement. If I remove the order statement from the SQL query, nothing changes in the order.
Do you have an idea on how to display the lines in the order of the sql query ?
Thank you for your knid answers !
Chrstian

Christian,
This can be a little tricky at first. Try this:
1. Remove the order by clause from the query.
2. Log out of the application, not the builder, just the application.
3. Log back in and try using the options in the interactive report to sort the information.
Does it work? If so:
4. Get the order the way you would like it as the default. Note: you get more sort options if you use the Action Menu (grind wheel) and selecting Sort over just clicking the column headers.
5. Save the report by selecting the Save Report option from the Action Menu. If you see a drop down, save the report as the "default".
6. Log out of the application again and back in.
Does it work?
Regards,
Dan
http://danielmcghan.us
http://sourceforge.net/projects/tapigen
You can reward this reply by marking it as either Helpful or Correct ;-)

Interactive Report with 2 tables

Similar Messages

Maybe you are looking for