Interactive Reporting - Dragging a Pie Chart into a Report

I have a report that contains about 5 charts at the end of all the tables containing data (the charts are in the report footer). I have created a new pie chart and want to drag it into the report footer as well. When I drag it in, it goes at the very beginning of the report footer. I have tried dragging it down and it seems to only want to stay on that very first page of the report footer. I am not able to move it onto a different page. How do I make this work? What I'd really like to do is add a new page in the middle of the charts and put this new chart on that new page ... but i couldn't figure out how to do that, so I was just going to drag the new chart to the very bottom of the other charts.
Thanks.
Terri T.

Terri
I had a case where I needed "extra" Report Footers. To do this I created bogus Report Group Columns in my results section with a constant value, same for all rows.
I then used this as a Report Group in the Report Section. I turned off the Group Header and Turned On the Group Footer with a Page Break Before or After. If you have other Report Groups then you would need to make the Bogus Report Group Column before any of your business report groups.
Wayne Van Sluys
TopDown Consulting

Similar Messages

3D pie chart in a report

Hi all,
I need to add a 3D pie chart in a report, and I don´t find it in the Chart Wizard. Anyone knows if is it possible to do this?
Thanks in advance.

Hello,
http://www.oracle.com/technology/products/reports/htdocs/faq/Graph_FAQ_with_style.html
How do I apply 3-D (three-dimensional) effect to my graphs?
For Pie graph type, add the following attributes to your Graph.xml:
<Graph ... pieDepth="30" pieTilt="20" ... >
Regards

SVG Pie Chart drill down report

I have created a svg pie chart report within a chart region. the chart contains url drill down.
The urls work fine but it opens the result from the url in the same chart region on the same page.
How can I get it to open on either a new page altogether or on another region on the same page.
Regards
iculhane

How do you get the url drill down to work? Can you explain to me? I have a 3d pie chart, what I want is when I click one of the pieces, it will drill down to a report.
Thanks,
Helen

Drill down to detail reports from a Pie Chart

Is it possible to code for drill downs in a Pie Chart to a detail report based on the section that is clicked in an RTF template?
Can anyone provide an example for this?

Hi Raja,
I used CEO LOG ON TOKEN to avoid asking for credentials when im trying to access the dash doard form another dashboard.
From connections we can have flash variable
Note : Names are case sensitive here in flash variable so name it as shown below
Define its name as CELogonToken
Variable Format as CSV
Variable data -->under ranges define a range :
Name it as CELogonToken
Range :map to a excel cell (Ex Sheet1!A$2)
From info view you can find DOC ID suppose your DOC ID is 9609
Then frame your URL AS
http://sapdev:8080/Xcelsius/opendoc/documentDownload?iDocID=9609&sKind=Flash&CELogonToken=
in another cell Concatenate the above your with your Logon token captured in Sheet1!A$2
suppose your url is in 'Sheet 1'!A$6
then your formula cell for concatenation should be 'Sheet 1'!A$6 & Sheet1!A$2
Use a url component and map the concatenated url cell to the component and place it over your pie chart.
uncheck show button background
try this and apply according to your scenario.
Hope this works..
@Sri

Pie Chart Drill Down Report

Hello All,
Please help. I created a 2D Pie chart. How do I get chart to drill down to a report based on the slice of pie I click. I've already created the report. I can't seem to get the link working.
Artnette

Artnette,
See this example:
http://htmldb.oracle.com/pls/otn/f?p=31517:156
Denes Kubicek
http://deneskubicek.blogspot.com/
http://htmldb.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

PIE chart in Oracle 9i Reports

Hi,
I'm using Orcle 9i Report builder to create reports.I'm creating web-source and saving it as JSP.Now I want to add 'PIE' charts into my reports.But, when I'm using the 'Graph' option in 'Insert' menu,it's not creating the 'PIE chart' properly.Pls anybody help me know how can I create 'PIE chart'
Thanks in advance
Rajesh K.R

Hi Rajesh,
Suppose you want to show salaries of a few employees in a Pie Chart (this is just a dummy graph to explain the steps - you can build more meaningful graphs). So you want that each employee's salary should be shown as a percentage of the total. Follow these steps:
1. Use the query - Select empno, sal from emp
2. Go to the web layout, place your curson in the rw:dataArea tags, and choose Insert > Graph
3. In the Graph wizard, choose Pie Chart, select empno in X-axis, and sal in the Y-axis
4. In the "Layout" step, drag "sal" from groups into the slices field
5. Fill in the titles, etc, and click finish.
Click "Run to Web" in the builder, and you should see the pie chart in the web page.
Navneet.

Crystal Reports Pie Chart showing Sum 100% in Legend. How to remove?

I have a Pie chart which displays correctly but in the Legend is displayed the values with the correct percentages AND the Sum showing 100%.
I need to either remove the Sum line or be able to change the text from the report since I have to produce the report in 4 languages and the Sum always shows up in the language of the server.
the legend looks something like;
value1 25%
value2 25%
value3 75%
Sum 100% <------ this line must go or be changed (e.g. in Italian as Totale)
Running a server for each language is not an option
There are a variable number of values so I cannot overlay a rectangle on a fixed position. (awfull solution)
Is there any way I can simply turn off the Summ (not the whole legend which is needed)?
any help would be greatly appreciated.
I am using Crystal Reports 2008
Best Regards
Chris Ryder

Well Thank you everyone for your suggestions.
The client is very specific about the look and feel so I cannot change to not using a legend. However, the discussions serves to confirm that it is NOT possible which is actually just as useful.
In Conclusion
To restate the problem the client has a report which can be displayed in one of four languages by choice from the end user. The report contains a pie chart which displays the various segment names and percentages as a legend. At the bottom of this legend appears automaticaly the word Summ in the langauge of the the 'Server Locale' (in our case german Summe) and the 100% value.
I wished to know if it was possible to either change the language of this word (without changing the server as I do not have access) or to remove it altogether.
The answer is NO it is not possible to remove only this word or to change it in anyway.
Our final workaround is;
we hide the Legend on the graph and build it as a seperate entity next to the graph. Not ideal as everything is then done twice and we have an indirect link between the segment colours and the legend colours which is not apparent directly in the report. But at least the client has signed off on the report.
once again thank you for taking the time to think about the problem.
Chris Ryder

PIE Chart Drill down in bex report

Hi Friends,
In my bex report i have pie chart for year 2008.
Shall I drill down on this report means if i click on one part of the pie chart will i go to another report or another pie chart.
Can any one pls tell me is it possible .
Thanks & Regards,
Ramnaresh.
Edited by: ramnaresh porana on Dec 1, 2008 6:35 AM

Hi ,
Thanks for reply.
how it is possible from context menu of the pie chart , i have seen the context menu of the pie chart but i did not get any related option for this one.
Can you pls guide me.
Thanks & Regards,
Ramnaresh.

Pie Chart in Reports 9i

Hi,
I am displaying a pie chart in my report. Now the problem I am facing is that the labels are overlapping on the chart, while I want them to be outside of the chart.
I tried fiddling with the xml code. Added <Slice labelposition= "LP_OUTSIDE_WITH_FEELER"> but it didn't help.
Can somebody suggest a solution for this ?
Also I would be obliged if some body can point me where i can get the documentation for graph.dtd.
Thanks
prakash

Prakash
We are currently working on better BI Graph bean xml documentation, so today all you have is the graph.dtd which is located in the bigraphbean.jar.
Thanks
The Oracle Report Team

Pie chart value not displaying in report builder

Hi,
I created a report by using report builder i used a pie chart in my report but one value is showing other one is not showing. Kindly tell me what is the problem behind it?
here is an image which is not displaying 1 value in pie chart. please help me

Hi Aamir,
Please check if there is any misconfiguration (e.g. show data label, formatting, etc.) for your chart slice per the following post.
http://social.technet.microsoft.com/Forums/en-US/ebc3bfc5-6338-4946-ade6-64e89611f6b7/ssrs-report-builder-30-pie-chart?forum=sqldatawarehousing
http://msdn.microsoft.com/en-us/library/dd220469.aspx
Further more, you can post this topic in SQL server forum for a better assistance.
http://social.technet.microsoft.com/Forums/en-US/home?forum=sqlreportingservices%2Csqldatawarehousing%2Csqlanalysisservices&filter=alltypes&sort=lastpostdesc
Thanks
Daniel Yang
TechNet Community Support

Excel 2007 pie chart conversion issue

I'm having issues converting my Excel 2007 spreadsheet that contains several pie charts into pdf. It will convert fine for everything but the pie charts. Their edges or outlines look perfect in Excel and the print preview, but once converted to pdf they're all choppy and rough looking. How can I fix this, as it makes the pdf look very unprofessional. I'm on Vista with all the latest updated, use office 2007 with all updates installed and adobe acrobat 8 with all the updates. I tried converting it through the acrobat feature in excel, as well as the print to pdf option. I even went so far to reinstall office 2003, with the same result. the pies were looking a bit smoother, but still way too choppy. how can i get adobe to convert perfect circular pie charts?
thanks!

From the ribbon>Acrobat>Create PDF. This gives me the ability to choose which tabs I want to include in the report.
I made PDF Printer my default and it worked! Thanks!
Why do you think my ribbon function doesn't work?

Create Multiple Pie Charts with Drill Down capability(foreach in mainreport

Hello All,
i need to create a report with 4 pie charts, which should have drilldown capability. i tried to do that, and i can do only for two charts. i need for the rest 2 also.
Please help.
Thanks

See this thread:
BO Design studio Chart Component issue ...!! | SCN
If Chart is bound to DS_1 and On Select event of chart is as below:
DS_2.setFilter(dimension, CHART_1.getSelectedMember(dimension));"
This works when you click a value on one chart it will select another.
I haven't tried it with hierarchies.

Pie chart legend summary bug, weird text being printed

Hi guys, I created a simple report with a Pie Chart on VS2008 and on my computer the chart legend displays all items perfectly but when I deploy it on our web server the legend summary, which is always 100% doesn't say "Total" anymore but a weird text, have you seen this before? Here's a sample.
On my machine the chart legend is the following:
ITEM1                                35.0%    63
ITEM2                                38.3%    69
ITEM3                                26.7%    48
Total                                  100.0% 180
On the server:
ITEM1                                35.0%    63
ITEM2                                38.3%    69
ITEM3                                26.7%    48
eTotal:1_n_pseudoloc_   100.0% 180

Have not seen this before, but do apply SP1 on your dev computer:
https://smpdl.sap-ag.de/~sapidp/012002523100009351512008E/crbasic2008sp1.exe
Recompile.
And use SP1 runtime:
https://smpdl.sap-ag.de/~sapidp/012002523100010010692008E/crredist2005_sp1_x86.zip
See if that helps.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

CRVS2010 Beta 2 Pie chart legend displaying "_e_Total:1_n_pseudoloc_"

Instead of displaying "Total" at the bottom of my pie chart legend I am getting the following text: "_e_Total:1_n_pseudoloc_"
The values and percentages calculate correctly, but the label is unusual.

Hello,
I have the same problem with my pie chart. My report was fine before I did my update to CRVS2010 Beta 2. I was using crystal report 11.5.
My report is really simple. I have a resume chart that you can drilldown. Each drilldown show the same chart for the selected
item.
I'm using Windows 7 Professionnel 64 bit in french (canada version).
Visual Studio Version 10.0.30319.1
Framework 4.0.30319

Pie Chart Slice Label Percentage + Label

Hi,
i'm newbie of Publisher 11. I've a problem. I've created a DataSet and a report containing a pie chart using wizard of Publisher as written at following link:
http://allaboutobiee.blogspot.it/2012/04/working-with-bi-publisher-11g-part3.html
My chart shows near each slice the percentage value, but it should show the percentage value + corresponding legend text. I've changed all chart properties on left side of window, but it doesn't work. I read that i must set the value LD_PERCENT_TEXT. But where????? How can i modify XML? I must export the report in OBIEE to have more functionalities? Can you explain me what to do step by step because it's the first time i use Publisher 11
Thanks
Giancarlo

do paste this in the alt text of the chart ,
Right click the picture , select format picture and go to alt text tab.
paste this in between the graph element and not at the end or beginning.
<SliceLabel visible="true">
<ViewFormat decimalDigit="1" decimalSeparator="." decimalDigitUsed="true" decimalSeparatorUsed="true"/>
</SliceLabel>

Interactive Reporting - Dragging a Pie Chart into a Report

Similar Messages

Maybe you are looking for