Interactive reporting : error while refreshing MSSQL data in Workspace

Hi all,
I recently work with Hyperion and I am facing an issue that makes me crazy.
My configuration is simple :
- 1 win2003 server with Hyperion Interactive Reporting services and workspace installed (both works properly)
- 1 winXP machine with MS Sql Server 2005
- My dev PC an winXP with IR studio.
I created an IR report with a MSSQL query that retrieves data into a Table.
The report is displayed properly and the data is OK.
When I refresh the data in IR studio, everything is OK.
I import the OCE file into the the workspace, following by the BQY file.
The report is displayed properly in workspace with the correct data.
I change the data in the MSSQL server and I try to refresh the report in the workspace.
So, I open the report in the workspace and I click on the refresh button.
But when I do that, I get an error message.
I read somewhere that we have to configure the DAS.
I assume that the configuration is made via the Administer/Database connection management (sorry if names are not correct, but I have a french version).
But when I try to add a new connection, I have only 4 choices for the type of database : Essabse, Financial Management, Planning and SAP BW.... No MSSQL Server.
I hope that anyone among you can help me, but anyway, thanks for reading my post.

You need to enter DATABASE details in DAS (Data Access Services) by running Service Configurator.
Then run Remote and Local Service configurator to enter database details.
##I assume that the configuration is made via the Administer/Database connection management (sorry if names are not correct, but I have a french version).
This is something related to Financial Reporting.
Hope this helps.
Regards,
Manmohan Sharma

Similar Messages

CRM Interactive reporting, error while running RSA1

Hello Experts,
I had configured CRM 7 with BI 7 system for reporting. Now I am trying to implement CRM interactive reporting using a different client (as reporting client) of the same CRM system.
While my CRM - BI scenario is working perfect, I am not able to configure the CRM interactive reporting using 2 different clients of the same system, When I am trying to run tx RSA1 from CRM reporting client, I get error "Logical system name has been changed".
Can anyone help me in this?

Hi Vicky,
There must be some error in your logical system assignment.
I request you to run these reports Z_OLTP_CONFIG_CHECK ( In CRM Client ) and Z_OLTP_CONFIG_CHECK_BI( Reporting Client) in order to resolve the errors. These reports will clearly point out the errors.
Have a look at Note 1263075 - CRM Interactive Reporting Configuration Check for the reports.
Regards...
Arup

Error while refreshing bqy file on workspace using stored procedure

Hi,
I am using stored procedure which returns ref-cursor. The report is running fine locally but on Workspace, while refresh, it gives the following error.
An Interactive Reporting Service error has occurred.-SQL API: [SQLNumResultCols], SQL RETURN: [-1], SQL STATE: [HY010], SQL NATIVE ERROR: [0], SQL MESSAGE: [[Microsoft][ODBC Driver Manager] Function sequence error]
(0)
I have ODBC/ODBC connection set up at BI+ configurator.
Thanks,
Manish

We also met this issue. Some guy told me this is a Hyperion limitation, is it true? I really need this function in Hyperion:(

Error while refreshing BO objects using live office

Hi Forum,
We are getting below error while refreshing the data using Live Office plug-in on PPT.
“An error occurred while receiving the HTTP response to http://........ This could be due to the service endpoint binding not using the HTTP protocol. This could also be due to an HTTP request context being aborted by the server.”
This error comes in exact 5 minutes.
The server name used for web service is from a clustered environment. When the individual node is used Live office refresh works fine but while using the generic name refresh fails.
Please provide your inputs.

Hi Honed,
Take the backup of dsws.properties file and do the following changes:
properties            values
domain               @<clustername>
session.timeout    value higher than 5 minutes
Below pdf can help you further:
http://help.sap.com/businessobject/product_guides/boexir4/en/xi4_wssdk_admin_en.pdf
Regards,
Yuvraj

Getting multiple error while refreshing or scheduling WebI report

Hi BO Admin Experts ,
Feacing multiple errors while refreshing or scheduling webi reports in BI4.0 CMC ,
Please find the below errors :
1)report schedule status failed
2)Parameters : xxxcorp-franklinee; ATOu supply unv
Error Message : An internal error occured while calling 'ProcessDPcmndsEx' API (Error:ERR_WIS_30270)
3 ) Format : WebI
Parameters : 10000000000159270
Error Message :CORBA error while communicating with the SL service
Could you please help me on the abive 3 issues for the WebI schedule reports
Cheers ,
Pradeep Gorpadu

Hi,
While refreshing the WEBI Reports would recommend you check the WEBI PROCESSING Server's last changed date from CMC--> Servers.
Check when you are refreshing the reports, do you see the time stamp changed of WEBI PROCESSING servers?
Do you keep getting this error messages for all WEBI reports? Can you re-produce this with simple e-fashion reports as well?
After that go to the node where WEBI PROCESSING servers installed and check on the event viewer details if you see any relevant error messages.
Regards,
Upendra

Getting error while refreshing the Webi report

Hi Guys,
I am getting error, while refreshing Webi reports. Error like:
A database error occured. The database error text is: Error in MDDataSetBW.GetCellData. Time limit exceeded.. (WIS 10901)
Could anyone please reply.
Regards,

Hi,
If it's not the universe limits, then I think you've hit the "MDX result contains too many cells" (more than 1million) problem.
So, I suspect a long running query, no filters/variable restrictions, and You've probably got a dump in ST22.
I don't know what BW you have, but if it is BW 7, do you have Enhancement Pack 01 and SP05<->10 ?
You should check out all the latest corrections from component BW-BEX-OT-MDX
the final proof of the pudding would be to enable MDA / SOFA log , capture the MDX SELECT statement and test it in BW MDXTEST - i bet you get the same error there.
regards,
H

Database Error while refreshing webi report

Hi,
I am getting following error while refreshing webi report. And also all my scheduled webi reports are getting failed because of same issue. What would be the reason for this error.
Regards,
PRK

Hi Praveen,
As you are getting error 'IES10901' it is related to database connection issue.
Find below link it might help you.
Database error in Web I ( BO 4.0)
check your universe connections to DB(ODBC connections).
Regards,
Samatha B.

Error, while pushing the data from Oracle to MSSQL.

Hi,
I am facing the below error, while pushing the data from Oracle to MSSQL.
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Transparent gateway for MSSQL][Microsoft][ODBC SQL Server Driver][SQL Server]Update or insert of view or function 'View_Name' failed because it contains a derived or constant field.[Microsoft][ODBC SQL Server Driver][SQL Server]Statement(s) could not be prepared. (SQL State: 00000; SQL Code: 8180)
Please suggest me, how to overcome from this.
Thanks.

[email protected] wrote:
Hi,
I am facing the below error, while pushing the data from Oracle to MSSQL.
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Transparent gateway for MSSQL][Microsoft][ODBC SQL Server Driver][SQL Server]Update or insert of view or function 'View_Name' failed because it contains a derived or constant field.[Microsoft][ODBC SQL Server Driver][SQL Server]Statement(s) could not be prepared. (SQL State: 00000; SQL Code: 8180)
Please suggest me, how to overcome from this.
Thanks.This is an error from SQL Server being passed back to Oracle so you can see the problem.
What it is saying is that you are trying to insert (or update) data to a database view and that view contains a column that is either a constant (literal) value or is derived (a calculation, formula or string concatenation etc.).
As such, you can't insert or update data on that column because it has nowhere to go on the database table(s) that underly the view.

Power Pivot Configuration error while refreshing connection on excel sheet for SharePoint 2013 and Sql server 2014

we are getting error while refreshing connection on excel sheet which containing data from data source in form of power pivot.
error is "An error occurred during an attempt to establish a connection to the external data source. The following connections failed to refresh:"
I am confused about Configuring the Analysis Service in SharePoint Mode.
What account should be used for Configuring the Analysis Service in SharePoint Mode?
what are the steps and what permissions are required and where to add it?
can you please explain in detail so i can make sure about my account permission properly in my environment?
Do we need to install Analysis service on sharepoint server box or not? if yes, then what are steps to follow it?
it is mentioned here to have two services are running under manages services under sharepoint central,
https://msdn.microsoft.com/en-us/library/jj682085.aspx#bkmk_verify_powerpivot
but we don't have SQL Server Analysis Services
running under Manage
services on server.
what need to be done here to fix this issue ?
Thanks,
Deepak Patel

Hi Deepak,
We are currently looking into this issue and will give you an update as soon as possible.
Thank you for your understanding and support.
Meanwhile, could you please check if there is any related ULS log for help troubleshoot the issue when error occurs.
http://social.technet.microsoft.com/wiki/contents/articles/3870.troubleshoot-powerpivot-data-refresh.aspx
http://blogs.technet.com/b/excel_services__powerpivot_for_sharepoint_support_blog/archive/2013/04/02/powerpivot-for-sharepoint-manual-data-refresh-failing.aspx
Thanks
Daniel Yang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Error while loading the data from PSA to Data Target

Hi to all,
     I'm spacing some error while loading the data to data target.
Error : Record 1 :Value 'Kuldeep Puri Milan Joshi ' (hex. '004B0075006C0064006500650070002000500075007200690
Details:
Requests (messages): Everything OK
Extraction (messages): Everything OK
Transfer (IDocs and TRFC): Errors occurred
      Request IDoc : Application document posted
      Info IDoc 2 : Application document posted
      Info IDoc 1 : Application document posted
      Info IDoc 4 : Application document posted
      Info IDoc 3 : Application document posted
      Data Package 1 : arrived in BW ; Processing : Data records for package 1 selected in PSA - 1 er
Processing (data packet): Errors occurred
      Update PSA ( 2462 Records posted ) : No errors
      Transfer Rules ( 2462 -> 2462 Records ) : No errors
      Update rules ( 2462 -> 2462 Records ) : No errors
      Update ( 0 new / 0 changed ) : Errors occurred
      Processing end : Errors occurred
I'm totally new to this issue. please help to solve this error.
Regards,
Saran

Hi,
I think you are facing an invalid character issue.
This issue can be resolved by correcting the error records in PSA and updating it into the target. For that the first step should be to identify if all the records are there in PSA. You can find out this from checking the Details tab in RSMO, Job log , PSA > sorting records based on status,etc. Once its confirmed force the request to red and delete the particular request from the target cube. Then go to PSA and edit the incorrect records (correcting or blanking out the invalid entries for particular field InfoObject for the incorrect record) and save it. Once all the incorrect records are edited go to RSA1>PSA find the particular request and update to target manually (right click on PSA request > Start update immediately).
I will add the step by step procedure to edit PSA data and update into target (request based).
In your case the error message says Error : Record 1 :Value 'Kuldeep Puri Milan Joshi '. You just need to conver this to Capital letter in PSA and reload.
Edit the field to KULDEEP PURI MILAN JOSHI in PSA and push it to target.
Identifying incorrect records.
System wont show all the incorrect records at the first time itself. You need to search the PSA table manually to find all the incorrect records.
1. First see RSMO > Details > Expand upate rules / processing tabs and you will find some of the error records.
2. Then you can go to PSA and filter using the status of records. Filter all the red requests. This may also wont show the entire incorrect records.
3. Then you can go to PSA and filter using the incorrect records based on the particular field.
4. If this also doesnt work out go to PSA and sort (not filter) the records based on the particular field with incorrect values and it will show all the records. Note down the record numbers and then edit them one by one.
If you want to confirm find the PSA table and search manually."
Also Run the report RS_ERRORLOG_EXAMPLE,By this report you can display all incorrected records of the data & you can also find whether the error occured in PSA or in TRANSFER RULES.
Steps to resolve this
1. Force the request to red in RSMO > Status tab.
2. Delete the request from target.
3. Come to RSMO > top right you can see PSA maintenace button > click and go to PSA .
4.Edit the record
5. Save PSA data.
6. Got to RSA15 > Search by request name > Right click > update the request from PSA to target.
Refer how to Modify PSA Data
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40890eda-1b99-2a10-2d8b-a18b9108fc38
This should solve your problem for now.
As a long term you can apply some user exit in source system side or change your update rules to ensure that this field is getting blanked out before getting loaded in cube or add that particular char to permitted character list in BW.
RSKC --> type ALL_CAPITAL --> F8 (Execute)
OR
Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
Refer
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
/people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
/people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
For adding Other characters
OSS note #173241 Allowed characters in the BW System
Thanks,
JituK
Edited by: Jitu Krishna on Mar 22, 2008 1:52 PM

Strange error while loading master data

Hi,
Has anybody seen the following error while loading master data?
6 duplicate record found. 886 recordings used in table /BI0/XCOSTCENTER
6 duplicate record found. 886 recordings used in table /BI0/PCOSTCENTER
and repeat again once (so total 4 lines of error message)
The update mode is "PSA and then in the infoobject (Package by Package)"
Surprisingly the step by step error analysis shows all green except in step "Processing error in Warehouse reported?" which is red. The over all status i.e. Total and Technical are both red.
It all means something went wrong but with the step by step error analysis all green even in the parts like "Processing successfully finished" and "All reported data packet received" I am confused.
To make matter more confusing there are no error records in corresponding PSA data package.
any comments would be greatly appreciated.

Hi Novice,
In your InfoPackage > Processing tab, select the option Only PSA and Update subsequently into Data Target, and also add the check mark for Ignore double data records. Then try the load again...it should be okay.
Hope this helps...

Error while running XML data definition

Hi,
Want to run report using XML Publisher, created one Data Definition using xml file,
<?xml version="1.0" encoding="WINDOWS-1252" ?>
<dataTemplate name="EmpDT" description="Employee Details" Version="1.0">
<parameters>
<parameter name="p_DeptNo" dataType="character"/>
</parameters>
<dataQuery>
<sqlStatement name="Q1">
<![CDATA[ SELECT Empno, Ename,Job,Mgr,Hiredate,Deptno FROM Emp WHERE deptno = nvl(:p_DeptNo,deptno) ]]>
</sqlStatement>
</dataQuery>
<dataStructure>
<group name="G_EMP" source="Q1">
<element name="EMPLOYEE_NUMBER" value="Empno"/>
<element name="NAME" value="Ename"/>
<element name="JOB" value="Job"/>
<element name="MANAGER" value="Mgr"/>
<element name="HIREDATE" value="Hiredate"/>
<element name="DEPTNO" value="Deptno"/>
</group>
</dataStructure>
</dataTemplate>
Added concurrent program and trying to run request but it's getting completed with error, when i checked log file it was showing error like,
XDO Data Engine Version No: 5.6.3
Resp: 20420
Org ID : 204
Request ID: 5810677
All Parameters: p_Dept_No=20
Data Template Code: EMP_DET
Data Template Application Short Name: AMW
Debug Flag: N
{p_Dept_No=20}
Calling XDO Data Engine...
[042811_124713802][][EXCEPTION] java.lang.NullPointerException
     at oracle.apps.xdo.dataengine.DataTemplateParser.GetNodeNumChildren(DataTemplateParser.java:334)
     at oracle.apps.xdo.dataengine.DataTemplateParser.templateParser(DataTemplateParser.java:266)
     at oracle.apps.xdo.dataengine.XMLPGEN.setDataTemplate(XMLPGEN.java:140)
     at oracle.apps.xdo.dataengine.DataProcessor.setDataTemplate(DataProcessor.java:193)
     at oracle.apps.xdo.oa.util.DataTemplate.<init>(DataTemplate.java:231)
     at oracle.apps.xdo.oa.cp.JCP4XDODataEngine.runProgram(JCP4XDODataEngine.java:283)
     at oracle.apps.fnd.cp.request.Run.main(Run.java:157)
java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
     at com.sun.java.util.collections.ArrayList.RangeCheck(ArrayList.java:492)
     at com.sun.java.util.collections.ArrayList.get(ArrayList.java:306)
     at oracle.apps.xdo.dataengine.DataTemplateParser.getParentDataSource(DataTemplateParser.java:1796)
     at oracle.apps.xdo.dataengine.XMLPGEN.writeDefaultGroup(XMLPGEN.java:331)
     at oracle.apps.xdo.dataengine.XMLPGEN.writeGroupStructure(XMLPGEN.java:286)
     at oracle.apps.xdo.dataengine.XMLPGEN.processData(XMLPGEN.java:273)
     at oracle.apps.xdo.dataengine.XMLPGEN.processXML(XMLPGEN.java:215)
     at oracle.apps.xdo.dataengine.XMLPGEN.writeXML(XMLPGEN.java:254)
     at oracle.apps.xdo.dataengine.DataProcessor.processDataStructre(DataProcessor.java:390)
     at oracle.apps.xdo.dataengine.DataProcessor.processData(DataProcessor.java:355)
     at oracle.apps.xdo.oa.util.DataTemplate.processData(DataTemplate.java:334)
     at oracle.apps.xdo.oa.cp.JCP4XDODataEngine.runProgram(JCP4XDODataEngine.java:294)
     at oracle.apps.fnd.cp.request.Run.main(Run.java:157)
can any one help me to solve this error? it's urgent.....
reply awaited..
Regards,
Priyanka.

HI,
We are facing some issue with CXML. I have posted a new thread [cXML with SAP PI;.
The content of that thread is pasted below: You can give your solution in the above mentioned thread so that I can grant points.
We need to use cXML for our project. Based on the thread ( [Error while uploading CXML data definition.; )
the following steps need to be done with the cXML DTD.
1.First Delete the Multiple Declaration of "Method .ANY"
2.replace all "ds:" character with 'ds_'
3.replace all "xades: " with 'xades_'
4.replace all "xmlns" with 'attr_'
5) After this use Altova to convert the DTD to XSD.
First of all, we could not carry out the 4th point, as in that case Altova says that it is invalid, and it fails to get imported in PI as well.
Without step 4 , if we import it as external definition, then there are certain attributes with type xml:lang coming in Red.
Can anybody tell us on how to fix this.
Thanks,
Himadri

Error while Activating DSO Data

Hello
I am having a problem, I am getting an Error while activating DSO Data, Data is loaded in DSO succefully but can not be activated with this error
"Activation of M records from DataStore object 0FIAR_O03 terminated"
Thanks

Hi,
The activation would have failed due to varies reasons..
It would be a short dump,check in ST22.
check the job log in SM37 for better understanding of the issue.
Have you loaded the respective master data?
if it is a transaction data load,then the SID is checked at the time of activation and not during loading.
So if the master data is not loaded then the activation would fail.
It can also be due to the system performance at that moment.
Even if the data volume is huge ,there are chances of the activation failing..
Try repeating the activation once again.it might succeed..
Else check the logs to understand the actual issue.

Getting an error while viewing a data in owb

Hi,
I created an External table based on a flat file. But I am not able to view the data in the external table while the flat file has the data.
I am using this external table as a source in my mapping but no data is getting loaded even after the successful execution of the mapping.I am getting the following error while viewing the data
ORA-29913: error in executing ODCIEXTTABLEFETCH callout
ORA-29400: data cartridge error
KUP-04040: file ATLAS in ATLAS_LOCATION1 not found
Please help me regarding this. I am new to the owb 11g.

Thanks for you reply. Still I can't view the data. Actually what i did is imported a .csv file using files then created a external table configured , validated and deployed.In next step created a mapping with this excel this using table operator validated and genrated code. In next step using the control center manager i deployed it. But i can't view the data still in the external table.
Is this procedure is correct for loading the excel sheet in to databse. My client environment is on windows xp and database is on linux environment.
Please help me regarding this.I am new to owb.

Error while deleting master data (Message no. RSDMD118)

Dear all,
I am performing a test to create and delete new Company Codes in Consolidation Workbench.
Creation of new Company Codes went on successfully but deleting them give me the following error message upon saving:
Error while deleting master data
Message no. RSDMD118
Since they are new Company Codes, they have not been used and stored in any BW cubes. Any idea on why BCS prevents me from deleting them?
Appreciate assistance to troubleshoot and resolve this error.
Thank you.

Thank you both for your replies.
I am sure those are not the case here as I deleted the Company immediately after creating it.
Just to make sure, I performed "Where-Used List" again and BCS confirmed that it is not being used anywhere:
Use of: Company UAT1 UAT Company 1
Number of Uses Found: 0
However, the same error message was displayed again after I tried to delete the Company and save the configuration. Still can't find any solid reason behind this.

Interactive reporting : error while refreshing MSSQL data in Workspace

Similar Messages

Maybe you are looking for