Interactive Scripting Editor (ISE) how to write a class for an action?

Hi - I need to write a class for an action in the interactive scripting editor. The class will create a new case (case management) and return the number. I have created a class with a method that does this and has been fully tested but we cannot get it to work as part of an action within the ISE. Are there any guidelines for writing classes for the ISE. Or has anyone done this? Do I need a super class? I have searched every where but can find nothing on this. Many thanks.

Hi Nigel,
I am also looking for the answer to this. Please let me know when you find a solution.
Kind Regards,
Andrew Griffin.

Similar Messages

Interactive Script Editor (ISE) materials on creating scripts

Is there any good materials (PDF or PPT) on creating interactive scripts?
I "have" only help
http://help.sap.com/saphelp_crm40/helpdata/en/d6/84cab18ea711d686f6000086568e5f/frameset.htm
But I can not find answer for my question:
I want to call ITS-based transaction in the end of scenario.
And I want to pass some params (Business Partner and some more) to ITS-based transaction. Then (after completing the transaction) I want to reveice exception code (ok or bad) and finish script with message or something else.
Many thx!
With best regards, Alexander

Look at posting:
IC WebClient Consultant's Cookbook
I points you to the IC WebClient consultants cookbook, it has good information about Interactive Scripting as well.

How to write a class for this?

how do i write a different class for this? how do i implement the "a.add(b)"? it code is to test basic arithmetic operations.
          System.out.print ("Arithmetic: enter two integer numbers: ");
          Integer a = new Integer (Integer.parseInt(kbd.readLine()));
          Integer b = new Integer (Integer.parseInt(kbd.readLine()));
          System.out.println (a + "+" + b + "-" + b + "*" + a + "/" + a + "%" + b + " is: "                                    + a.add(b).sub(b).mul(a).div(a).rem(b));

public class arthOperation{
     add()
          sub()
     sub(){
          mul()
     mul(){
          div()
     div(){
          rem()
     rem(){
is it write?

How to write Resourebundle class for uix page

Our web application should support some different languages .I have took a look of "Internationalization" by help system but still not so clear.
How to make a simple uix page supported with multiple languages at runtime ? If Resoursebundle is the answer ,how to realize it? Has anybody example codes?
thanks
Yong

Yes, you should use a java ResourceBundle, and you can use the bundle data provider to bind text from a bundle. This is described in the Internationalization chapter of the UIX developers guide.
As to how to write a resource bundle, there should be info available on the web, so try doing a search.

Interactive Script Editor: add answer and buttons in a question

Hi gurus,
I'm working on CRM 7.0 with Internet Explorer v7.0.6002.18005, and I'm interested on creating an "answer" in the Interactive Script Editor.
Details of the issue:
1) I am able to create questions
2) I pushed the button "add answer area" and a grey box appeared under the question text area
3) I pushed also the button "add button area" and another grey box appeared under the answer area
4) I created a button z_button that is now listed under the menu "Answer" in the repository, like other standard buttons (i.e. Yes, No, Aendrern...)
5) we could not create any standalone answer. The "create new" button just lists options as follows: field, objection, question, action, command button, script. As you can see, the system doesn't let me create any answer.
PROBLEM NUMBER 1: insert a button in my question:
I can drag this button in the grey button area, but i cannot drop it! No way at all...how can I insert a command button in my question?
PROBLEM NUMBER 2: insert an answer in my question:
I can drag any already existing standard question (fields like Customer Name, etc) in the grey answer area, but I cannot drop it.
How can I insert an answer in my question?
Is there anybody out there that can help, please? I have no clue...I'm loosing sleep on this.
I already watched also the video [http://www.sdn.sap.com/irj/scn/elearn?rid=/library/uuid/b08ceba5-87b9-2c10-4e96-d1c9ca33453c|http://www.sdn.sap.com/irj/scn/elearn?rid=/library/uuid/b08ceba5-87b9-2c10-4e96-d1c9ca33453c] and I see it's possibile to do what I need.
Thank you so much,
Vicky

Hello
i am facing the same preoblem which u r facing under problem 2, is this fixed, if so can u plesae share the same......

Problems in Interactive script editor.

Hi,
I am not able to see the buttons 'Transport', 'Activate' ..etc in the interactive script editor. Also the tabs 'Script Transport' and 'Script Profile' are missing.
Do we need to do any settings or dow we need to have any authorizations for this.
Please anyone clarify.
Thanks
PD

Hi,
I have reinstalled JRE to 1.4.2_16, and use IE 6.0. I have CRM 5.0.
but I don't see any difference in behaviour - Interactive Script Editor works as it worked earlier (active only Create and Open from file). Also it diplays error message "Error occured" - and nothing more :(. I cannot do anything.
With Java 6 update 3 - still no changes. When I uninstalled JRE and update and installed jre 1.3.1._06 still the same message in IE when working with ISE.
Can you help?
In sap note 894119 I cannot understand sentence : "When using Internet
Explorer, HTMLB Design2003 should be used."
Could you explain what it is? I cannot find it in web.
Regards
Radek

Call List Management and Interactive Script Editor Examples

Hello All,
Can any one provide docus on Call list management and Interactive Script Editor Exercises or any examples how to implement them.
kindly m a i l me: r a j . k a n d i AT y a h o o . c o m
Cheers Raj.

Muneeb,
I have found what looks like a solution for marketing attributes.
Marketing attribute in the text field, interactive script
However, even though I followed this It is still NOT updating the marketing attributes for the given BP.
Also, I am no further forward in knowing how to add BDC Field entries in the Answer so that we can update BP fields like the preferred communication method etc.
I would like to hear from you if you have found a solution Muneeb.
With regards
Jason

Interactive script editor in webclient

HI,
In webclient I can't found interactive script editor under business role IC_MANAGER, which work center should be assigned?
BR,
ROBERT

You can launch it from PROCESS MODELING workcenter : Interactive Script Editor on Create link groups.
Workcenter : IC-MGRPM
Group ID : IC-MGPM-CR
Logical Link ID : IC-SCREDIT
If it doesn't appear, you can go to your business role customizing and make it visible from "Adjust Work Center Group Links" folder of Business Role customizing
You can also launch it from GUI :
Add to your favorites a BSP Application : CRM_IC_ISE, with start page default.htm. (Sometimes it doesn't work due to JRE version, you can switch the start page to another .htm file as a workaround)
Hope this helps,
BR,
Cenk Sezgin

CRM 5.0 Webclient - Interactive Script Editor

Hi Gurus
I'm launching the Interactive Script Editor in Test mode from SE80 for BSP Application CRM_IC_ISE.
My problem is that when I want to create a New Question or Button or practically anything for matter I'm not given an input field to give the new object a name. I'm only seeing a input field for inputting the text of the question, button, etc.
When I click on save I get the following error half way down the screen: e.bad_file_name
I don't see any notes on this particular problem.
Any ideas?
Max points for the right answer.
Many Thanks
Panduranga

Hi Bruno
Thanks for this.
Along with your note and a number of others I managed to resolve the issue.
Dropped down to JRE 1.4.2_03
I was only able to then launch the Editor when I was sitting on site with the client.
Once accessing outside their firewalls the editor will not launch correctly.
Max points
Many Thanks & Regards
Panduranga

How to write conversion routine for key figure?

Our customer has this requirment:
we need to know the last time of some TV program in BEx report, If a TV program last 500 seconds, we need show the key figure like this: 00:08:20, If a TV program last 100000 seconds, we need show the key figure like 27:46:40 (27 hours and 46 minitues and 27 seconds), If we define a key figure as time, BW system will report a error that say it is not acceptable time. If we want to define a integer, but we need display it like hhmmss format. We know we can write conversion routine for char. but I don't how to write conversion routine for key figure.   Please give me any hint if any other solutions?
Edited by: SY DONG on Dec 2, 2010 3:36 AM

If you want to do in Transformation Layer :
You can use routine ...break up the seconds into minute hour and seconds
you will have to handle few cases in this:
let say your variable lv_seconds holds the number of seconds you want to convert to hour min and seconds
DATA: lv_seconds type i,
           lv_hrs type i,
          lv_sec type i,
          lv_min type i.
lv_hrs = lv_seconds / 3600
if lv_hrs >= 1.
lv_min = (lv_hrs - trunc(lv_hrs))*60
here again handle seconds if min >60.
else.
lv_hrs = '00'.
lv_min = lv_hrs*60
It is just hint ..how you can manipulate the seconds to get it...you will have to think about the complete algorithm
Regards,
RK

How to write a code for open new txt file in swing

hai all,
now i do one project in java.that project's GUI is Swing. But i don't known swing (basic).So how to write a code for open new txt file and "Open window " in menu item on swing.that means when i click the "New" on menu that time open a new txt file. open also like that type.
plz give me that code ! very urgent
Advance Thanks !
RSK

Swing Tutorial:
http://java.sun.com/docs/books/tutorial/uiswing/index.html
Since you don't know the basic of swing read the tutorial, it is for your own good because it is useless if we provide you with a code you don't even understand and how it works.
If you want a menu read the tutorial about using menus and for opening a file read using JFileChooser.
note: don't use the word urgent because it implies that your problem is more important than others.

How to write Select statement for this codition

I need to check whether SGTXT contains BELNR value.
SGTXT is a text field and It should be matched with BELNR
How to write select statement for this.
Select AUGBL AUGDT into t_BSAD
from BSAD
where SGTXT should have the given BELNR Value.
Plz note : Here I cannot give as SGTXT = BELNR as coz BELNR have only 10 digits.

Hi,
data temp(12).
concatenate '%' belnr '%' into temp.
Select AUGBL AUGDT into t_BSAD
from BSAD
where SGTXT like temp.
If belnr is having multiple values,just create a internal table as follows.
types : begin of ty,
        belnr....
        temp(12),
        end of ty.
data itab_ type standard table of ty.
data wa type ty.
loop at itab into wa.
concatenate '%' wa-belnr '%' into wa-temp.
modify itab from wa index sy-tabix transporting temp.
endloop.
Change your select statement accordingly.
Kindly reward poits if it helps.

How to write a cursor for mutiple columns in forms urgent required.........

i created one table rk with 8 columns and that i designed in forms.
but i have another table grk with 4 columns.
this grk contains data.
this grk 4 columns data i have to retrive in rk table in froms by multiple records.
the both column names are same in the both tables.
because by seeing this 4 columns data i will insert remaining 4 column by entering in rk table in form.
i known that i have to write cursor to retrive the 4 columns data for multiple record from grk table and in trigger i have to produce to rk table.
i have worked but it is not working.
can any body help me out how to write a cursor for 4 column to retrive multple records in form

Hi,
Try,
DECLARE
        CURSOR Cur_Test IS SELECT <field_1>, <field_2>, <field_3>, ... <field_n> FROM <table_name> WHERE <condition>;
BEGIN
        OPEN Cur_Test;
        LOOP
                FETCH Cur_Test INTO <items_or_variables>;
                EXIT WHEN Cur_Test%NOTFOUND;
        END LOOP;
        CLOSE Cur_Test;
END;Regards,
Manu.

How to write complex sql for this

Hi ALL,
I have a requirement like this
I have 5 tables which i have to join to get the result
but there no join column to 2 other table.
I want to get all the applications using cobal,running on UNIX.
How to write the query for this
1.APP
APP_i DESC
1 Accounts
2 Payments
3 order transfer
4 Order processing
2.Techgy
techid techdesc
1 cobal
2 Java
3.APP_Techgy
APP_I Techid
1 1
2 1
3 1
4 2
4.Pltfrm
pltfmid pltfrmdesc
1 Windows NT
2 UNIX
5.APP_Pltfrm
APP_I pltfrmid
1 1
2 1
3 2
4 2
ouput must be
APP_i Desc techDESC pltfrmdesc
3 ordertranfer Cobal UNIX
Thanks in advance

This ('descr' in place of 'desc')?
SQL> select a.app_i, a.descr, t.techdesc, p.pltfrmdesc
from app_techgy atc,
   app a,
   techgy t,
   app_pltfrm ap,
   pltfrm p
where atc.techid = t.techid
and atc.app_i = a.app_i
and atc.app_i = ap.app_i
and ap.pltfrmid = p.pltfmid
order by a.app_i
     APP_I DESCR                TECHDESC             PLTFRMDESC
         1 accounts             cobal                windows nt
         2 payments             cobal                windows nt
         3 order transfer       cobal                unix
         4 order processing     java                 unix
4 rows selected.

How to write sql query for counting pairs from below table??

Below is my SQL table structure.
user_id | Name | join_side | left_leg | right_leg | Parent_id
100001 Tinku Left 100002 100003 0
100002 Harish Left 100004 100005 100001
100003 Gorav Right 100006 100007 100001
100004 Prince Left 100008 NULL 100002
100005 Ajay Right NULL NULL 100002
100006 Simran Left NULL NULL 100003
100007 Raman Right NULL NULL 100003
100008 Vijay Left NULL NULL 100004
It is a binary table structure.. Every user has to add two per id under him, one is left_leg and second is right_leg... Parent_id is under which user current user is added.. Hope you will be understand..
I have to write sql query for counting pairs under id "100001". i know there will be important role of parent_id for counting pairs. * what is pair( suppose if any user contains both left_leg and right_leg id, then it is called pair.)
I know there are three pairs under id "100001" :-
1. 100002 and 100003
2. 100004 and 100005
3. 100006 and 100007
100008 will not be counted as pair because it does not have right leg..
But i dont know how to write sql query for this... Any help will be appreciated... This is my college project... And tommorow is the last date of submission.... Hope anyone will help me...
Suppose i have to count pair for id '100002'. Then there is only one pair under id '100002'. i.e 100004 and 100005

Sounds like this to me
DECLARE @ID int
SET @ID = 100001--your passed value
SELECT left_leg,right_leg
FROM table
WHERE (user_id = @ID
OR parent_id = @ID)
AND left_leg IS NOT NULL
AND right_leg IS NOT NULL
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Interactive Scripting Editor (ISE) how to write a class for an action?

Similar Messages

Maybe you are looking for