Interactive sub headings back and forth

Dear All,
I'm working on an ePub in InDesign CC and have chapter headings with sub headings under them.  I would like people to be able to tap a sub-heading and jump ahead to that page with an interactive hyperlink, and I have successfully incorporated that interaction.  Now I want my reader to be able to jump back to the sub-headings list so that they can choose another sub heading and jump ahead to that page, but I can't seem to do that.  How can I accomplish a back and forth interaction from sub-heading list to heading and then back to sub-heading list?  I've tried cross reference, but I don't think that's what I need to accomplish this task.  Thanks.
Small Town Gal

Dear Ariel,
InDesign CC seems more than a little quirky in this procedure, but I was finally able to get it to work.  I have created my own website with Dreamweaver and have used hyperlinks in PDFs, so I am familiar with how to use them, but for some reason they sometimes don't show up in the hyperlinks panel in InDesgn CC after they are created, or the "reset" button doesn't clear up any errors.   Deleting and re-creating seemed to be the only solution for one particular link, because it kept locating the wrong link rather than the one that I wanted.  I finally got it cleared out and now everything works as I planned.
Also, I am working with an ePub, not a PDF.  I find the PDFs easier to work with, although I realize that both PDF and ePub can be exported from the same document,  but I'm slogging my way through.  From past experience, it seemed to me that a two-way hyperlink should work, but it took me a bit of trying to find the correct combinations to accomplish it!  Thanks again.
Small Town Gal

Similar Messages

  • Command Button colors corrupt after switching back and forth from design view.

    I would say my experience level with Access is "getting there."
    I therefore don't thing I'm making a newbish mistake.
    Has anyone else noticed this?  As it's bugging me quite badly.
    1.  A command button has had it's color formatted (pressed, hover, etc. nothing fancy)
    2.  It works fine.
    3.  In my navigation form, if I switch to design view, then select a given sub-form... like "customers" - and switch back out of design view, to form view - then without fail, all customized command buttons within that sub forms' color will 'corrupt'
    ie, change.
    4. Closing and reopening the navigation form (ie, my main menu) restores it, but the same thing will happen should I go back to design view for the sub form.
    5.  Finally - this behaviour does not happen when switching back and forth between views on the original form that isn't a sub form in the navigation form.  (Ie,. the main 'customers' form). 
    Can any clever folk give me a solution? :(
    Thanks,  
    Eric Rowlands
    EDIT - My apologies, I am using Access 2013 for a desktop database.

    1) We will need to understand whether the issue is seen on any sample database.
    2) IS this seen only on your system, we would need to check on other system also
    3) If the issue is seen in all system & issue is not seen in the sample database then this could be database specific issue
    4) As per my understanding the issue is consistent, we would need to find what is the VBA code or which code is used while designing this form.
    5) We would need to see if the issue is seen only on that particular navigation form?
    6) Is the button gets corrupt I mean to say non-usable once it get discolored ?
    7) What is your end goal just in case if you are able to work on your database i.e. when working on the navigation form without going in design view is issue still seen there ?
    8) Since when are you experiencing this issue ?
    9) If possible please provide me the environment details of your system & Access application, whether the issue is seen only in access 2010 can we check in access 2007 or in access 2013.
    I would really appreciate if you can answers the above questions this will really help us to isolate the issue further
    in terms of technical troubleshooting after answering the above question I might come up with another question so that we can do extensive isolating the issue so the if required we can involve the developer also.

  • I have an iMac from 2008.  When I start I get gray screen with apple and turning gear. Next blue screen. Then light blue screen with turning gear. Back to blue screen.  Now just back and forth blue to light blur

    I have an iMac from 2008.  When I start I get gray screen with apple and turning gear. Next blue screen. Then light blue screen with turning gear. Back to blue screen.  Now just back and forth blue to light blur

    Reinstall OS X:
    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
    Reinstalling Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Continue button.
    Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

  • I have a G5 PPC Dual 20" Mac Displays - I want to incorporate a Mac Mini and still use my keyboard and Monitors and Switch back and forth. How do I do this?

    I have a G5 PPC Dual 20" Mac Displays - I want to incorporate a Mac Mini and still use my keyboard and Monitors and Switch back and forth. How do I do this?

    The Hatter,
    I am a novice at Mac so I read all I can.  From what I understand the NEC monitors I bought require Display Port for their maximum performance.  The GTX 680 only has DVI outputs.  Difference from what I understand is larger bandwidth with the DP.
    You said I have the 4000 for CUDA.  I am not all that familiar with CUDA and when I do read about it I do not understand it. 
    A concern I have is, that if I connect the 2 high end NEC monitors via the 5770, using it's 2 Display Ports I would have nothing connected to the 4000.  Is the 4000 doing anything with nothing connected?  I read where in a PC system the 2 cards would interact but in a Mac system they do not.
    Bottom line, as I see it, the 4000 will not be useful at all to me, since I want a dual monitor set-up.
    So far the 5870 seems the best choice, higher band width than the 5770, and it has 2 Display Ports to optimize the NEC monitors.
    I'm not sure how fine I am splitting hairs, nor do I know how important those hairs are.  I am just trying to set up a really fast reliable system that will mainly be used for CS6 and LR4.  Those NEC monitors are supposed to be top notch.

  • I use my ipod for audible books downloads. In the past I have been able to move books back and forth from library to ipod according to what I was listening to.  I can no longer retreive books in the library. Any suggestions?

    I use  my 6th generation Ipod strictly for Audible downloads.  In the past, I have been able to move titles back and forth from the Ipod and my Itunes library, to control the amount books on the ipod. Recently, an exclamation mark has appeared next to the titles as I try to transfer to the ipod, and the book does not transfer.  Any suggestions on how to regain access to my purchased library? 

    1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
    OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
    Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
    Your first priority is to make more space on that HD. Nothing else can be done until you do.
    Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
    Your Library has been damaged from being run on an overfull disk.
    How much free space on it now?

  • Can you move files back and forth between an iPad and a PC using iTunes?

    If I read this article correctly, http://support.apple.com/kb/ht4094 I should be able to connect my iPad to my PC, fire up iTunes and then on the Apps tab in iTunes I should be able to click on an app, Pages for example and then just drag files onto the Pages Documents column from a Windows Explorer window.
    This is great.  I was hoping to use DropBox but it is such a hassle I don't know why people are so thrilled with DropBox on iPad.  If I can just move files back and forth using iTunes that should be fairly easy.  I wish there was a way to just upload my files to iCloud from my PC but the iCloud control panel app for Windows only seems to connect Outlook, Photostream and Bookmarks. I want to be able to just carry my iPad and not have to deal with a computer. 
    I thought that they said that you didn't need to have a computer to have an iPad.  I guess if you have a computer and then GET an iPad its a different story, unless you have a Mac of course.
    Anyway my question is: can you move files back and forth between a PC and an iPad using just iTunes?

    I still need to do some trial and error testing with DropBox and my iPad.  But can I link my iPad to my DropBox account so that I can always see the files on DropBox when I open Pages on my iPad?  I just want one place to store my documents, and iCloud doesn't seem to be up to the task when it comes to opening a fil;e, editing it and then saving it back to iCloud.  I just want a networked storage location that works like a networked drive on my LAN.
    I realize that hollywood and the music industry are up in arms about file sharing on the Cloud which is why so many things are made more difficult than they need to be. 

  • How can I toggle back and forth from a main pdf to its attachments?

    I have a main document that I created in word and inserted hypertext to either link to 1) websites 2) a series of appendices, 3) 6 large format pdf maps or 3) a series of reference documents.
    In Word, I have everything in a thumbdrive directory with the main file and three folders holding the individual files of the maps, appendices and references. All the links work but the file can't be copied to another drive without redoing all the links to the files (there are about 40 files all together).
    I saved the word main document as a pdf. All the auxiliary files are also pdfs. All the weblinks came through in the pdf of the main document but the links to files need to be re-established.
    1. I tried to create an acrobat portfolio with the main file and the folders of maps, references and appendices but I can't seem to make links in the main document to open up specific files in the folders.
    2. I compiled all the files together into a binder and tried to use bookmarks to link the main part of the document to the first page of the 40 supporting files but at 700 pages the document is just too cumbersome to recreate the ~100 bookmarks I would need to add.
    3. I tried adding everything as attachments and created links but once the link is activated from the main document and the new window opens, the main document has closed up. I need the reader to be able to toggle back and forth between the screen with the main document and the supporting documents.
    What I am trying to create is one main document with links to the maps, appendices and references that will open a new window when each link is activated. Then the new window can be closed and the reader is back at the screen of the main document on the page with the link they just used.
    This doesn't seem to me like it should be difficult since it almost works in Word except for the file structure.
    I would really appreciate any guidance on how to make this work. The document and supporting files have already taken more than a year to put together and I'm stuck at this last step.

    I think that the number of clicks to open a file is a rather shortsighted way to compare two operating systems.<<</div>
    Well excuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuse ME!
    I happen to think it's a pain to click twice on files when I'm used to clicking just once.
    But Tiger is a nice operating system. I enjoy that it has much more capabilities than the OS9. I mean, Tiger keeps up with the advancing internet. My beef is really against OS9. I can open OS9 in Tiger but not Tiger in OS9.

  • Is there a way to have Safari not reload the page when moving back and forth?

    I really like being able to swipe back and forth in Safari, however when I do this, it reloads the page. Why? Can't it just used the cached content? I understand that my view my be 'outdated', but I could always manually refresh if I wanted to.
    The reason I want this is because when you swipe back, it takes a few seconds before you can actually scroll the page while you wait for it to load, which is annoying

    Might be a cache issue ...
    Open the Finder. From the Finder menu bar click Go > Go to Folder
    Type or copy paste the following:
    ~/Library/Caches/com.apple.Safari/Cache.db
    Click Go then move the Cache.db file to the Trash.
    Quit and relaunch Safari to test.

  • My iPod touch 4 is not operating. Whenever I try to type in my pssword, the logo shows up. And this just goes back and forth. What should I do??

    This started a week ago, I turned off my ipod, and it could not be turned back on again. So I held the sleep button and the home button simultaneously for ten seconds, and my iPod responded, the logo appeared. And my iPod worked perfectly for a week, when the same problem appeared last night, I tried to use the tip which I used last week. But a new problem appeared. The logo showed up, and when I tried to type in my password, the logo appear on the screen again, and this just goes back and forth. I can't type in my password. This is driving me crazy, Pleeeeaze, someone please help me!!!!

    Have you tried connecting the iPod to your computer and restoring the iPod?

  • On my imac, All of a sudden I am unable to send original emails with any attachments.  I can attach the file but when I try to send it, it won't send.  Also, if I am emailing back and forth as it gets longer, it no longer transmits

    On my imax, all of a sudden I am unable to send original emails with attachments of any size.  I can attached the file but when I try to transmit, it will not go.
    Also, if I am emailing back and forth, once there gets to be several threads, it will no longer transmit.  Any suggestions. I am using gmail in the apple mail system

    Mike,
    Are any of your other applications going wonky, or is it just Logic?
    I'm afraid I've never heard of this particular problem before, but if it were happening to me the first thing I would do is delete my "com.apple.logic.express.plist" file in Library>Preferences, then repair permissions in Disc Utility, and finally restart my computer.  Then I would launch Logic and see if the problem has been corrected.  It's amazing how much these two steps can accomplish.
    If that doesn't resolve the issue I would launch Logic and go to Preferences>Audio Units Manager to see if all my plug-ins are properly validated.

  • How can I use Mac OS 10.4.11 and 10.5.5 back and forth?

    I installed Mac OS 10.5.5 onto my G4 Sawtooth, which is running on an upgrade processor at 1.3 GHz and 2 GB RAM. The machine also has been running with Mac OS 10.4.11. I love both Mac OSs. But it is cumbersome to restart the machine back and forth. Is there anyway that I do not have to restart the machine for switching the Mac OSs?
    Thanks.
    Robert

    I'll check with OWC and see what they say. I have an ACARD 6880M AEC Controller attached to two internal HD. It caused two Maxtor HD,on e after the other, click-to-death. Since that, I removed the ACARD and have been using one HD without any more "clicking" noise. I posted in the thread below about my experience. Nobody had similar experience. Nevertheless, if OWC feels that ACARD can work with both Mac OS 10.5 and 10.4 at same time, I may consider to put the ACARD back and place another HD in and see if it works.
    http://discussions.apple.com/thread.jspa?threadID=1127045
    Thanks.
    Robert

  • Back and Forth Logic in process-controlled (BRF) workflows in SRM 7.0

    Hi all,
    I am using the process-controlled workflow in SRM 7.0.
    The approval itself works ok, but now I am trying to set up the back-and-forth functionality (similar to how it worked for the Badi in SRM 5.0) as default:
    This is what happens:
    Requester creates shopping cart.
    Shopping cart goes for approval.
    Approver rejects SC.
    Back at the requester the SC can only be displayed, but not changed.
    As far as I can tell this happens for any kind of decision set (as long as all items are rejected).
    This is what I am trying to set up.:
    Once the SC is back at the requester, he can either accept the rejection OR change the SC and 're-order' it ie send it back to approver again.
    I know if the requester checks the flag 'Work Item to Requester at Process End' this can be done, but I need the system to have this functionality automatically without setting a flag manually.
    I really appreciate any suggestions on this issue.
    Cheers
    Ulrike

    Dear Masa,
    thanks for your helpful answer. I have an better idea now, but I am still not quite able to set it up.
    I have applied note 1296209.
    When i tried to set up this step I did the following:
    level type of that step I used 'Approval with completion'.
    Created Expression of type SAP Formula Interpreter, with return type Boolean, and use formula:
    0V_WF_CURRENT_DECISI = 'REJECTED'
    linked the evaluation id to above expression.
    Task id for the step is: 40007994 - Accept Decision / Adjust Document
    When i do this and create a SC, my system dumps after clicking on describe requirement::
      The following error text was processed in the system SR7 :  The method could not be found at dynamic call.
    The error occurred on the application server SAP01_SR7_07 and in the work process 1 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
          Method: CALL_RFW of program /SAPSRM/CL_WF_RULE_CONTEXT====CP
          Function: /SAPSRM/WF_BRF_0EXP000 of program /SAPSRM/SAPLWF_BRF_DATA
          Method: PROCESS_SPECIFIC of program CL_CALL_FUNC_METHOD_BRF=======CP
          Method: IF_RULE_COMPONENT_BRF~PROCESS of program CL_EXPRESSION_BASE_BRF========CP
          Method: GET_RESULT of program CL_EXPRESSION_POOL_BRF========CP
          Method: IF_EXPRESSION_BRF~GET_SUBEXPRESSION of program CL_EXPRESSION_BASE_BRF========CP
          Method: IF_FOEV_CONNECTOR~EVALUATE of program CL_FORMULA_BRF================CP
          Method: EVALUATE of program CL_FOEV_FORMULA===============CP
          Method: EVALUATE of program CL_FOEV_FORMULA===============CP
          Method: EVALUATE of program CL_FOEV_FORMULA===============CP
    What I don't understand about your explanation is what you mean by "Acceptance by Contact person". I don't have that option anywhere in my BRF? Is that supposed to show up under Resp. Resolver Name (like RR_MANAGER)?
    Also where did you add that step in Process level configuration? I have 2 approval steps (just approval, without completion) and then i wanted to enter this step after those levels before the automatic system decision.  But i wasn't able as the system doesn't allow you to add a completion step after a 'normal' approval step.
    Cheers for your help
    Ulrike

  • I have an IPod 2nd generation I bought from a pawn shop.  It worked for a day but now when I try to charge it, it keeps switching back and forth from the large full screen icon of a low battery and a lighting bolt below to the blue screen with the apple s

    I have an IPod 2nd generation I bought from a pawn shop.  It worked for a day but now when I try to charge it, it keeps switching back and forth from the large full screen icon of a low battery and a lighting bolt below to the blue screen with the apple symbol in the middle.  I had it on charge all night but still dead.

    Try here.
    iPod touch: Hardware troubleshooting
    You may have a hardware problem.

  • Can photos be transferred back and forth from/to iPhoto and an external drive? If so, how?

    Can photos be transferred back and forth from/to iPhoto and an external drive? If so, how?

    When in iPhoto for iOS you can share your photo to iTunes and then connect your iPad to your computer and use the file sharing window to move the photo to any connected hard disk. Sharing to iTunes is the only way to maintain original file size when sharing a photo in iPhoto for iOS.

  • IPhoto 8.1.2 - on a teacher's iBook: Worked flawlessly 2 weeks ago. Now it continues to lock up, it often will not import scans, I can not rotate a picture - it just flips back and forth. HELP I need to get a project out!

    I created a beautiful Keepsake book a week or so ago. It worked flawlessly. Since - I've had several problems (nothing has changed on the computer/system). iPhoto will frequently lock up causing me to force quit. Other times, upon opening, it says that I don't have permission or something to open it. It often is not importing a scan saying it is an unrecognizable format (it's what I used before). When trying to rotate a photo it keeps flipping back and forth and wont stay put.
    iPhoto 8.1.2
    I've run Disk Utilities multiple times - fixes for about 1-2 scans/launches of iPhoto
    I've restarted the computer.
    I've tried to update - but can't locate a version my computer will allow me to update to.
    Using an HP C3180 scanner/printer --- that is also recently not working ---- locks up, takes FOREVER to scan and then show up on the desktop.
    HELP ME!!!! We're trying to get 2 books out for our students before the end of the school year.
    Thanks

    Sounds like your Library is corrupted to me. Simple solution: restore form your back up.
    Other than that:
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

Maybe you are looking for