Intercompany balancing was unable to generate the intercompany account in AP

Dear all,
I have an invoice in AP the status is validated but not accounted.
I am having the following message
"Intercompany balancing was unable to generate the intercompany account. Please check the intercompany balancing rules setup"
I have followed the steps in doc id 749579.1 but the issue has not been resolved.
Grateful if anyone can provide me with a quick solution since this is preventing a period closure and the preparation of final accounts.
Thanks

Unable to access the file, which is uploaded to SR.
Please provide some of the error in Create Accounting file along with journal entry.
Check whether the code comabination of intercompany journal line, which create accounting is trying to create to balance the balancing segment is valid or not.
By
Vamsi

Similar Messages

Create Acctg Error: Intercompany balancing was unable to generate the inter

hi,
12.0.4
Issue:
There is an error in Create Acctg. of Cost management due to intercompany balancing was unable to generate the intercompany account. Please check the intercompany balancing rules setup.
Ledger Star Appliance Center, Inc.
Application Accounting Definition Cost Management
Error Message
Intercompany balancing was unable to generate the intercompany account. Please check the intercompany balancing rules setup.
Ct uses Oracle AAD and are valid.
Ct had the same offset account processed in other transactions and posted to GL, but some others have not been processed.
The period close subledger exception report show that 17 events are unprocessed with error 0:
0 Intercompany balancing was unable to generate the intercompany account. Please check the intercompany balancing rules setup.
Offset 037.0249.1350.6005500.0000.8888.000000.000000
Please advise how ct can process these 17 events in error.
https://support.us.oracle.com/oip/faces/filedownloadservlet?ObjectType=SR&ObjectNo=3-5288562551&FileName=Create_Acctg_Output_Jan28_with_error.doc
Thanks
Jayashree
Edited by: user763208 on 22/02/2012 19:36

Unable to access the file, which is uploaded to SR.
Please provide some of the error in Create Accounting file along with journal entry.
Check whether the code comabination of intercompany journal line, which create accounting is trying to create to balance the balancing segment is valid or not.
By
Vamsi

Write Back Error: The system was unable to generate appropriate SQL

All,
Have looked at the previous threads on this topic and it has usually been syntax problems in the xml file. I've been over it a million times and can't see any problems.
The error I'm getting is when I click the "update" button to initiate the write-back;
The system was unable to generate appropriate SQL. Please contact your system administrator.
Template: 'UPDATE WC_DEPT_GOALS_D SET Week_Beginning = @{c0}, Week_Ending = @{c1} WHERE id = @{c2} '
Record: '<record action="update"><value columnID="c2">142</value><value columnID="c0">04/30/2012</value><value columnID="c1">05/06/2011</value></record>'
My xml file is as follows;
<?xml version="1.0" encoding="utf-8" ?>
<WebMessageTables xmlns:sawm="com.siebel.analytics.web/message/v1">
<WebMessageTable lang="en-us" system="WriteBack" table="Messages">
<WebMessage name="GOALS">
<XML>
<writeBack connectionPool="GL Oracle Data Warehouse Connection Pool">
<insert> </insert>
<update>UPDATE WC_DEPT_GOALS_D SET Week_Beginning = @{c0}, Week_Ending = @{c1} WHERE id = @{c2} </update>
<postUpdate>COMMIT</postUpdate>
</writeBack>
</XML>
</WebMessage>
</WebMessageTable>
</WebMessageTables>
Week Beginning and Week End are just two columns from WC_DEPT_GOALS_D - 44 columns in total which I want to write back to. These two are datetime, the others are int or float. I can't even get it to write back with these two, let a lone the other 42! :)
Any suggestions? Thanks guys!
Please note, I've also tried it without the "postUpdate" COMMIT line. Same error.
Edited by: Ally on Jun 3, 2011 7:50 AM
Edited by: Ally on Jun 3, 2011 8:00 AM

If your column data type is varchar then you have to specify that in single quote
COMMIT :if your DB supports automatic commit so you don't have to add it.
check that the name in "<WebMessage name="GOALS">" is the exact same case as what you have in your report. i.e. it's Goals in the XML and then it cannot be GOALS in the Report or goals.
And also try this..
<update>UPDATE WC_DEPT_GOALS_D SET Week_Beginning = @{c0} WHERE id = @{c2}
UPDATE WC_DEPT_GOALS_D SET Week_Ending = @{c1} WHERE id = @{c2}</update>
Restart all the services and oc4j
Cheers,
Aravind
Edited by: Aravind Addala on Jun 3, 2011 8:51 AM
Edited by: Aravind Addala on Jun 3, 2011 8:57 AM

Write Back - The system was unable to generate appropriate SQL. Please cont

Hi I am facing the below error while implementing writback feature in obiee 11g.
The system was unable to generate appropriate SQL. Please contact your system administrator.
Template: 'update OBI_DEV.W_PRODUCT_D_WRITE_BACK SET MON_REL_TARGET = '@{c5b2e8f4d057e4201}', MON_GROSS_TARGET= '@{ce74545331e56f0bc}' where PRODUCT_FAMILY = '@{c9a6eeb6940647d1b}' and PRODUCT_TYPE = '@{c037fcc09911be97b}' and REGION = '@{c0bc248e1e2c13fc4}''
Record: '<record type="update"><value columnID="c0c5d0de6e8463149"><sawx:expr xmlns:sawx="com.siebel.analytics.web/expression/v1.1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="xsd:string">PROD_A</sawx:expr></value><value columnID="c9a6eeb6940647d1b"><sawx:expr xmlns:sawx="com.siebel.analytics.web/expression/v1.1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="xsd:string">DP_CO</sawx:expr></value><value columnID="c037fcc09911be97b"><sawx:expr xmlns:sawx="com.siebel.analytics.web/expression/v1.1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="xsd:string">Commerical Product</sawx:expr></value><value columnID="c3805a6285c2d923d"><sawx:expr xmlns:sawx="com.siebel.analytics.web/expression/v1.1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="xsd:string">INTL</sawx:expr></value><value columnID="c0bc248e1e2c13fc4" type="update"><newValue><sawx:expr xmlns:sawx="com.siebel.analytics.web/expression/v1.1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="xsd:decimal">3</sawx:expr></newValue><oldValue><sawx:expr xmlns:sawx="com.siebel.analytics.web/expression/v1.1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="xsd:decimal">2</sawx:expr></oldValue></value><value columnID="c5b2e8f4d057e4201"><sawx:expr xmlns:sawx="com.siebel.analytics.web/expression/v1.1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="xsd:decimal">6</sawx:expr></value></record>'
============================================================================================================'
here is my XML Template.
<WebMessage name="Writeback">
<XML>
<writeBack connectionPool="Oracle DataWarehouse Connection Pool Write Back">
<insert> </insert>
<update>update OBAW_DEV.W_PRODUCT_D_WRITE_BACK SET M MON_REL_TARGET = '@{c5b2e8f4d057e4201}', MON_GROSS_TARGET= '@{ce74545331e56f0bc}' where PROD_FAMILY = '@{c9a6eeb6940647d1b}' and PRODUCT_TYPE = '@{c037fcc09911be97b}' and REGION = '@{c0bc248e1e2c13fc4}'</update>
</writeBack>
</XML>
</WebMessage>
Thanks
Kumar
Edited by: 877408 on Jan 9, 2013 7:57 AM
Edited by: 877408 on Jan 9, 2013 7:58 AM
Edited by: 877408 on Jan 9, 2013 8:11 AM

How about following line between the tags <WebConfig> and </WebConfig> in the instanceconfig.xml located under $INSTANCE_HOME/config/OracleBIPresentationServicesComponent/coreapplication_obips1:
<LightWriteback>true</LightWriteback>
Restart Presentation Services
And check the write back permissions in Analytics->Administration> Manage Privilege as shown below:
Just in case also check user has write access
If helps pls mark else update
Try with no space between tags like <insert></insert>
Edited by: Srini VEERAVALLI on Jan 9, 2013 10:46 AM

WriteBack Error-The system was unable to generate appropriate SQL....

Hi Experts,
I am providing writeback functionality on my report. But i am getting following error...
The system was unable to generate appropriate SQL. Please contact your system administrator.
Following is the xml template:
+<?xml version="1.0" encoding="utf-8"?>+
+<WebMessageTables+
xmlns:sawm="com.siebel.analytics.web/message/v1">
+<WebMessageTable lang="en-us" system="WriteBack" table="Messages">+
+<WebMessage name="SHNEW">+
+<XML>+
+<writeBack connectionPool="Connection Pool">+
+<insert> </insert>+
+<update>UPDATE CUSTOMERS SET CUST_LAST_NAME='@{C5}' WHERE+
+CUST_ID=@{C3}</update>+
+</writeBack>+
+</XML>+
+</WebMessage>+
+</WebMessageTable>+
+</WebMessageTables>+
At Connection pool I am using OCI 10 g as call Interface...
Please tell me where i am going wrong?????????????
Thanks in Advance
Regards,
Avi

Hy,
I suppose that you have a problem in your configuration :
* check the name of your connection pool
* check you SQL.
I will try to replace C5 by c5
UPDATE CUSTOMERS SET CUST_LAST_NAME='@{C5}' WHERE CUST_ID=@{C3}by this
UPDATE CUSTOMERS SET CUST_LAST_NAME='@{c5}' WHERE CUST_ID=@{c3}You can find the complete and detail procedure here :
http://gerardnico.com/wiki/dat/obiee/write_back
Success
Nico

The ADO NET Source was unable to process the data. ORA-64203: Destination buffer too small to hold CLOB data after character set conversion.

We developed a SSIS Package to pull the data From Oracle source to Sql Server 2012. Here we used ADO.Net source to pull the records from Source but getting the below error after pulling some 40K records.
[ADO NET Source [2]] Error: The ADO NET Source was unable to process the data. ORA-64203: Destination buffer too small to hold CLOB data after character set conversion.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED.
The PrimeOutput method on ADO NET Source returned error code 0xC02090F5.
The component returned a failure code when the pipeline engine called PrimeOutput().
The meaning of the failure code is defined by the component,
but the error is fatal and the pipeline stopped executing.
There may be error messages posted before this with more
information about the failure.
Anything that we can do to fix this?

Hi,
Tried both....
* Having schema type as Nvarchar(max). - Getting the same error.
* Instead of ADO.Net Source used OLEDB Source with driver as " Oracle Provide for OLE DB" Getting error as below.
[OLE DB Source [478]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on OLE DB Source returned error code 0xC0202009. The component returned a failure
code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the
failure.
Additional Info:
* Here the Source task is getting failed not the conversion or destination task.
Thanks,
Loganathan A.

Mainstage Was unable to complete the download world music loops

Ok, so I have bought Mainstage 2.2 from the app Store, and have almost downloaded all the additional content.
However, the only pack that will not complete it the World Music Apple Loops.
I immediately get the message, Mainstage was unable to complete the download.
There is no attempt to download this pack.
Any suggestions? I don't really want to uninstall and download 20Gb again.
Cheers

More disk space than I can shake a stick at, very stable internet connection, speedtest shows ping <18ms etc. The main reason for purchasing mainstage is for the loops and instruments, at £20 that's a bargain, but only if I can get the application to download the last package.
Wireshark shows that the server is rejecting the request from MainStage as a HTTP/1.1 416 Requested Range Not Satisfiable.
Looks like either a MainStage Application issue requesting the HTTP GET command or the Server not servicing that request.
Apple over to you!

The server was unable to load the SSL provider library needed to log in

Hello All,
When I am trying to login to my default SQL 2008R2 SP2 instance in windows 2003 server via ssms, I am getting the below error
A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) (.Net SqlClient Data Provider)
When I looked into the error log and i could see lot of these messages.
The server was unable to load the SSL provider library needed to log in; the connection has been closed. SSL is used to encrypt either the login sequence or all communications, depending on how the administrator has configured the server. See Books
Online for information on this error message: 14 Not enough storage is available to complete this operation.
Force protocol encryption is set to off.
I am not sure what is the underlying problem. server's total RAM is 4 Gb and max_server_memory is set to 2 GB. CPU utilization is very normal at the time of issue.
I restarted the SQL service and i am able to connect to the instance, but the issue is repeating and i need to find a permanent fix.
Thanks

I could also see the below in error log some time before i get the above alert
Error: 701, Severity: 17, State: 123.
There is insufficient system memory in resource pool 'internal' to run this query
then after sometime flurry of alerts
The server was unable to load the SSL provider library
needed to log in; the connection has been closed. SSL is used to encrypt either the login sequence or all communications, depending on how the administrator has configured the server. See Books Online for information on this error message: 14 Not enough storage
is available to complete this operation.
Thanks

The document information panel was unable to load. the document will continue to open. For more information, contact your system adminsitrator.

Hi Guys,
I am creating the library using object model with custom content type. When i am opening document from custom content type, the meta data fields are not displaying in the document and throwing below error.
The document information panel was unable to load. the document will continue to open. For more information, contact your system adminsitrator.
Document Information Panel cannot open a new form.
The form contains schema validation errors.
Content for element '{http://schemas.microsoft.com/office/2006/metadata/propertiesRoot}properties' is incomplete according to the DTD/Schema.
Expecting: {http://schemas.microsoft.com/office/2006/metadata/properties}properties.
But after saving the document, then meta data is enabled.
Thanks in advance for suggested solutions.
thanks
Santhosh G

Hi,
For a better troubleshooting, I suggest to do as follows:
1. Please try to update the Location column's schema by following the steps below.
1) Go to Site Settings -> "Site Columns"
2) Click on "Location", after the page is opened. Don't modify any settings, click "OK" to forcibly update the field's schema.
2. Re-edit the document information panel template to see if the issue still occurs.
Please go to the Library setting > click the corresponding content type(need to enable managed of content types in Advanced settings) > click Document Information Panel settings.
3. Here are some similar links about your issue, please take some time to look at them:
http://social.msdn.microsoft.com/Forums/en-US/sharepointcustomizationlegacy/thread/243b4852-3f17-4a3a-b6d7-187d65a5f088/
http://blogs.msdn.com/b/raresm/archive/2010/03/30/document-information-panel-cannot-open-the-form.aspx
https://joranmarkx.wordpress.com/2012/02/10/sharepoint-document-information-panel-cannot-create-a-new-blank-form/
If the issue still occurs, please check if the command below can help(change the site URL and the library name in the code):
Apply-Fix -siteUrl "http://your site URL "
function Apply-Fix($siteUrl)
clear
Add-PSSnapin "Microsoft.SharePoint.Powershell" -ErrorAction SilentlyContinue # -EA 0
[Environment]::CurrentDirectory=(Get-Location -PSProvider FileSystem).ProviderPath
foreach ($spwTarget in (Get-SPSite $siteUrl).RootWeb.Webs) {
Write-Host "Checking Web: " $spwTarget.Url
$list = $spwTarget.Lists["your library name"]
$fields = $list.fields
foreach($field in $fields)
if($field.SourceId -eq '{$ListId:your library name;}')
$schemaxml = $field.SchemaXML
$schemaxmldata = [xml]$schemaxml
$schemaxmldata.Field.SetAttribute("SourceID", $list.ID)
$schemaxml = $schemaxmldata.get_InnerXml()
$field.SchemaXML = $schemaxml
$field.Update()
Write-Host "Fixed" $field.Title "field in the library"
Write-Host "Done."
More information:
SharePoint 2010: Creating a Custom Content Type using Visual Studio
http://www.codeproject.com/Articles/410880/SharePoint-Creating-a-Custom-Content-Type-usi
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected].
Dennis Guo
TechNet Community Support

INSTALLED ITUNES AND THE ERROR-MAPI WAS UNABLE TO LOAD THE INFORMATION SERVICE APLZOD-OCCURS. WHAT DO I DO.

INSTALLED ITUNES AND THE ERROR-MAPI WAS UNABLE TO LOAD THE INFORMATION SERVICE APLZOD-OCCURS. WHAT DO I DO.

Is this on a Windows XP, Vista or 7 system?

The server was unable to process the request due to an internal error.

Properties set in my project are below
namespace EmployeeService
public class Employee
private int _Id;
private string _Name;
private string _Gender;
private DateTime _DateofBirth;
public int Id
get { return _Id; }
set { _Id = value; }
public string Name
set { _Name = value; }
get { return _Name; }
public string Gender
set { _Gender = value; }
get { return _Gender; }
public DateTime DateofBirth
set { _DateofBirth = value; }
get { return _DateofBirth; }
This is the service i have developed in my project
namespace EmployeeService
// NOTE: You can use the "Rename" command on the "Refactor" menu to change the class name "Service1" in both code and config file together.
public class EmployeeService : IEmployeeService
public Employee GetEmployee(int Id)
Employee objemp = new Employee();
string cs = ConfigurationManager.ConnectionStrings["DBCS"].ConnectionString;
using (SqlConnection con = new SqlConnection(cs))
SqlCommand cmd = new SqlCommand("spGettblEmployeewcf", con);
cmd.CommandType = CommandType.StoredProcedure;
SqlParameter Idparameter = new SqlParameter();
Idparameter.ParameterName = "@Id";
Idparameter.Value = Id;
cmd.Parameters.Add(Idparameter);
con.Open();
SqlDataReader dr = cmd.ExecuteReader();
while (dr.Read())
objemp.Id = Convert.ToInt32(dr["Id"]);
objemp.Name = dr["Name"].ToString();
objemp.Gender = dr["Gender"].ToString();
objemp.DateofBirth = Convert.ToDateTime(dr["DateofBirth"]);
return objemp;
public void SaveEmployee(Employee objemp)
string cs = ConfigurationManager.ConnectionStrings["DBCS"].ConnectionString;
using (SqlConnection con = new SqlConnection(cs))
SqlCommand cmd = new SqlCommand("spInsertEmployeewcf", con);
cmd.CommandType = CommandType.StoredProcedure;
SqlParameter ParameterId = new SqlParameter()
Value = objemp.Id,
ParameterName = "@Id"
cmd.Parameters.Add(ParameterId);
SqlParameter ParameterName = new SqlParameter()
Value = objemp.Name,
ParameterName = "@Name"
cmd.Parameters.Add(ParameterName);
SqlParameter ParameterGender = new SqlParameter()
Value = objemp.Gender,
ParameterName = "@Gender"
cmd.Parameters.Add(ParameterGender);
SqlParameter ParameterDateofBirth = new SqlParameter()
Value = objemp.DateofBirth,
ParameterName = "@DateofBirth"
cmd.Parameters.Add(ParameterDateofBirth);
con.Open();
cmd.ExecuteNonQuery();
The Service Contract code is
namespace EmployeeService
// NOTE: You can use the "Rename" command on the "Refactor" menu to change the interface name "IService1" in both code and config file together.
[ServiceContract]
public interface IEmployeeService
[OperationContract]
Employee GetEmployee(int Id);
[OperationContract]
void SaveEmployee(Employee objemp);
// TODO: Add your service operations here
// Use a data contract as illustrated in the sample below to add composite types to service operations
and i deployed the EmployeeService in iis and consuming the service in my web application the code is below
protected void btnsave_Click(object sender, EventArgs e)
EmployeeService.EmployeeServiceClient client = new EmployeeService.EmployeeServiceClient("basicHttpBinding");
EmployeeService.Employee employee = new EmployeeService.Employee();
employee.Id = Convert.ToInt32(txtid.Text);
employee.Name = txtname.Text;
employee.Gender = txtgender.Text;
employee.DateofBirth = Convert.ToDateTime(txtdob.Text);
client.SaveEmployee(employee);
protected void btnget_Click(object sender, EventArgs e)
EmployeeService.EmployeeServiceClient client = new EmployeeService.EmployeeServiceClient("basicHttpBinding");
EmployeeService.Employee employee = client.GetEmployee(Convert.ToInt32(txtid.Text));
txtname.Text = employee.Name;
txtgender.Text = employee.Gender;
txtdob.Text = employee.DateofBirth.ToShortDateString();
and when i am entering the details of employee Id,Name,Gender,DateofBirth and clicking save button iam getting the following error
The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior)
on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.
Code in web.config file in Webapplication(Client) is the following
<?xml version="1.0"?>

<configuration>
<system.diagnostics>
<sources>
<source name="System.ServiceModel.MessageLogging" switchValue="Warning, ActivityTracing">
<listeners>
<add type="System.Diagnostics.DefaultTraceListener" name="Default">
<filter type="" />
</add>
<add name="ServiceModelMessageLoggingListener">
<filter type="" />
</add>
</listeners>
</source>
<source name="System.ServiceModel" switchValue="Warning, ActivityTracing"
propagateActivity="true">
<listeners>
<add type="System.Diagnostics.DefaultTraceListener" name="Default">
<filter type="" />
</add>
<add name="ServiceModelTraceListener">
<filter type="" />
</add>
</listeners>
</source>
</sources>
<sharedListeners>
<add initializeData="C:\Users\HEMANTH\Desktop\Client\Client\Web_messages.svclog"
type="System.Diagnostics.XmlWriterTraceListener, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
name="ServiceModelMessageLoggingListener" traceOutputOptions="Timestamp">
<filter type="" />
</add>
<add initializeData="C:\Users\HEMANTH\Desktop\Client\Client\Web_tracelog.svclog"
type="System.Diagnostics.XmlWriterTraceListener, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
name="ServiceModelTraceListener" traceOutputOptions="Timestamp">
<filter type="" />
</add>
</sharedListeners>
<trace autoflush="true" />
</system.diagnostics>
<system.web>
<compilation debug="true" targetFramework="4.0" />
</system.web>
<system.serviceModel>
<diagnostics>
<messageLogging logEntireMessage="true" logMalformedMessages="true"
logMessagesAtTransportLevel="true" />
</diagnostics>
<bindings>
<basicHttpBinding>
<binding name="basicHttpBinding" />
</basicHttpBinding>
<wsHttpBinding>
<binding name="mexHttpBinding">
<security mode="None" />
</binding>
</wsHttpBinding>
</bindings>
<client>
<endpoint address="http://localhost/EmployeeWebServices/EmployeeService.svc/basic"
binding="basicHttpBinding" bindingConfiguration="basicHttpBinding"
contract="EmployeeService.IEmployeeService" name="basicHttpBinding" />
<endpoint address="http://localhost/EmployeeWebServices/EmployeeService.svc/mex"
binding="wsHttpBinding" bindingConfiguration="mexHttpBinding"
contract="EmployeeService.IEmployeeService" name="mexHttpBinding" />
</client>
</system.serviceModel>
</configuration>
Things i have tried till now are
1)changed the name of the name of the endpoint address basicHttpBinding to basicHttpBinding_IEmployeeService but still get the save error.
2)Opened the Message Log Trace. Got the error as follows
<MessageLogTraceRecord>
<HttpResponse xmlns="http://schemas.microsoft.com/2004/06/ServiceModel/Management/MessageTrace">
<StatusCode>InternalServerError</StatusCode>
<StatusDescription>Internal Server Error</StatusDescription>
<WebHeaders>
<Content-Length>730</Content-Length>
<Cache-Control>private</Cache-Control>
<Content-Type>text/xml; charset=utf-8</Content-Type>
<Date>Sat, 03 Jan 2015 12:12:24 GMT</Date>
<Server>Microsoft-IIS/7.5</Server>
<X-AspNet-Version>4.0.30319</X-AspNet-Version>
<X-Powered-By>ASP.NET</X-Powered-By>
</WebHeaders>
</HttpResponse>
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
<s:Header></s:Header>
<s:Body>
<s:Fault>
<faultcode xmlns:a="http://schemas.microsoft.com/net/2005/12/windowscommunicationfoundation/dispatcher" xmlns="">a:InternalServiceFault</faultcode>
<faultstring xml:lang="en-US" xmlns="">The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute
or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.</faultstring>
</s:Fault>
</s:Body>
</s:Envelope>
</MessageLogTraceRecord>
Try to understand but could not understand because i'am new to wcf services. Please help me to find the error details.
Thanks in advance
Regards
rax227

Hi Mohan,
I didn't use Fiddler before, I just download and use it but how to see the request message from this software?
I have logged the request to event log before send to web service and copy this request from event log to testing with soapUI, so I don't think have between the actual messages being sent to your client via orchestration and soapui. In the log Response shape
I see the fault response in event log.
You can see
this link to know how to use fiddler. As I suggested above the error you need to check is at the server side who is hosting the service( your party ) because you are getting fault response properly from them. The webservice you are calling seems to look
like WCF service too. Your life would have been so easier if you could ask them to have firewall open from your dev box to their dev server so that you can use use "Add Service Reference" wizard, that even they have .NET wcf service too.
Did you by any chance manage to talk to them what they are getting or if they can increase the exception details in the fault message for you?
If this answers your question please mark it as Answer and if this post is helpful, please vote as helpful. Thanks !

Microsoft Intune was unable to set the desired mobile device policy for one or more users due to the following error: A2CE0100

Hi!
We have fatal or critical error message on Microsoft Intune Portal but all agents are working just fine. Before opening support ticket we would like to hear comments from the experts on this forum. We would also like to fix this error before starting to
manage mobile devices with Intune.
Error message on Intune Portal:
"Microsoft Intune was unable to set the desired mobile device policy for one or more users due to the following error: A2CE0100"
Repeated: 19 times.
Class: (System) Policy
Random Fatal error message on C:\Program Files\Microsoft\OnlineManagement\Logs\PolicyAgent.log found from one Windows 8.1 client:
2015-02-21 08:49:20:704 2852 1ab0 FATAL: DocumentProvider::IndicateToConsumer/pp->ProcessPolicies(NULL, NULL, NULL, NULL) failed with error 0x800704d5.
That said, we are not facing any specific problem but we would like to find symptom of this repeating error message on Intune Portal . We would appreciate to get any thoughts about this case.
Br.
Jukka

Hi Jukka,
Mobile policy doesn't apply to clients using the Full Client download. Please open a support case so the team can assist in further troubleshooting.
Thanks,
Jon L. - MSFT - This posting is provided "AS IS" with no warranties and confers no rights.

Unable to open windows using boot camp. Get message "The bless tool was unable to set the current boot disk." Any thoughts, Thank you.

Unable to open windows using boot camp. Get message "The bless tool was unable to set the current boot disk." I am using an Imac , Lion operating system, and Windows 7. It worked a few days ago. Any thoughts, Thank you.

Note that nowhere in the Boot Camp instructions does it tell you to use Disk Utility to format the Windows partition. The Boot Camp Assistant program creates the partition & sets the +partition scheme info+ of the disk as appropriate for the Windows installer but the Windows installer itself is responsible for formatting the new partition with the appropriate +file system scheme+ (NTFS for Windows 7).
If you follow the instructions in the Boot Camp Installation & Setup Guide to the letter you should have no problems installing Windows.

Error while creating task: The server was unable to save the form at this time. Please try again. (SharePoint 2013)

I get the following error while saving a task inside task list:
"The server was unable to save the form at this time. Please try again."
I tried restarting "search service host controller".
The server has 8 GB RAM and according to task manager, 6.67 GB is being used.
I logged into the site with user which is the owner of the site. I tried creating tasks from client as well as the SharePoint server itself. Same error is shown in both the cases.
How do I find information on the exact problem that is causing the error? What are possible solutions?

Hi robikshrestha,
This error message often shows when there is low memory that can be used, the workaround restart the “SharePoint Search Hosting Controller” service is to release some memory, and make it work. Whether restart the service release memory
in your situation?
Would you please check whether this issue happens all the time in task list, or happens sometimes when the memory is lower to use. If it doesn’t have a large impact, you can restart the server, check the result. have a look at the event
log and ULS log, see whether there is related information.
If it happens all the time, would you please use other browsers, whether the results are same? This may be caused by some add-ons in IE, like Free Download Manager I have seen.
Thanks,
Qiao Wei
TechNet Community Support

"Error: Final Cut Pro was unable to read the movie file just captured"

Hello everyone!
We had a computer crash while we were working on Final Cut Pro and backing up some media to a hard drive.
Since then, whenever we "capture' video footage and hit the escape key to stop capturing - we get -
"Error: Final Cut Pro was unable to read the movie file just captured"
We reinstalled the Final Cut Pro software all over again thinking that maybe the software got corrupted and we also rectified any disk permissions for the hard drives.
Any ideas?
Thanks
Efrain
G 5 Mac OS X (10.4.8)

We had a computer crash while we were working on Final Cut Pro and backing up some media to a hard drive.< </div>
You eventually want to figure out how that happened and make sure you fix it.
Since then, whenever we "capture' video footage and hit the escape key to stop capturing - we get -
"Error: Final Cut Pro was unable to read the movie file just captured"
<
You reformatted the external drive, yes? You might not have used the correct initialization setting. Should be Macintosh HFS, journalling is optional. Or you have a drive formatted for Winderz.
Aside from incorrect drive formatting, we have seen this error if the capture is incomplete or improperly terminated.
It's not an FCP issue, it's hardware.
bogiesan

Intercompany balancing was unable to generate the intercompany account in AP

Similar Messages

Maybe you are looking for