INTERCOMPANY BILLING AND STO

Hi!
i wan som info regardin INTERCOMPANY BILLING AND STO.
Thank u
Bye

Hi Rohit,
Go thr below links:
http://help.sap.com/saphelp_47x200/helpdata/en/4d/2b911d43ad11d189410000e829fbbd/content.htm
http://help.sap.com/saphelp_47x200/helpdata/en/4d/2b917843ad11d189410000e829fbbd/content.htm
http://sap-img.com/sap-sd/configure-intercompany-stock-transport-order.htm
http://www.sap-img.com/materials/mm-faq.htm
Steps in configuring STO:
If you are referring to Inter company STO, pls follow the below steps.
1) Create delivering plant as vendor in receiving plant’s company code & sales area – XK01
2) From the vendor number created in step 1, create Vendor info record for the material that needs to be stock transferred.
3) Ensure material is extended to both plants
4) Delivering plant must be assigned to the receiving sales organization
5) In the Vendor info record, go to MK03 and change the “add purchasing data” to delivering plant.
6) Create receiving plant as customer in delivering plant’s company code & sales area.
7) Ensure Purchase organization for the receiving plant is maintained
8) Go to IMG- Materials Management-Purchasing-Purchase Order-Set up stock transport order ( transaction code:OMGN) and complete all the settings.
Note:
Maintain receiving plant / customer number from step 6/ delivering sales area
Delivering plant/ customer number from step 6/ receiving sales area
Maintain NLCC replenishment for cross company stock transfer with delivery type NB
9) ME25- Create Purchase Order from receiving plant
10) VL10B - Create delivery order from delivering plant’s shipping point with reference to the purchase order number raised in step 9.
Save.        
11) Go to VL02n & pick /post goods issue for the delivery order number created in step 10
12) Do VF01 & bill to customer
In step 8 You have the option of UB type in place of NB
In step 10 you can also use VL04.
In step 12 you select F8 type (pro-forma invoice).
Reward points if it helps
Regards
Srini

Similar Messages

  • Difference between intercompany sales and STO (inter)?

    HI Experts
    Can any one tell me what is the difference between  between intercompany sales and STO(inter)?
    LNaidu

    hi..
    Intercompany sales trans.
    the customer orders stock from the sales org (3001)..that belongs to comp code 3000...the Sales org 3001 then creates the sales order and indicates the delivering plant as a plant that belongs to different company code i.e. 1000..
    The sales org 3001 then invoices the customer for material purchased..the system automatically creates the inter-compnay billing doc at the same time as the customer's billing doc is created,,,This inter-compnay invoic ius sent from the delivering plant to selling sales org..
    Two billing doc..1. standard customer billing doc that is sent from the sales org to the customer.
    2. inter-compnay doc that is sent from delivering plant ot sales org..
    Inter compnay STO..
    comp code 3000 has plant 3000 creates purchase order to purchse stock from plant 1000 based in comp code 1000..
    the stock is delivered to plant 3000. comp code 1000 then creates an inter compnay invoice and bills compnay code 3000 for the stock...
    hope it works..
    Thanks

  • Intercompany billing and PCA

    Hi,
    We've got a problem after PCA was implemented with Intercompany billing and especial the End customer invoice.
    The scenario where Profit centre is updated on the material Master and we would like to keep the same Profit centre throughout all the stages of the process without using substitution as the product range is dynamic very.
    We have implemented a user exit on the point of the Sales order creation which copies the value from field PRCTR (delivery PC) to field PCTRF (Billing PC) but on the next stage billing document is created the value is deleted again. As there is no substitution the Dummy Profit centre is used for the End Customer Billing document.
    I have asked SAP what can be done without using substitution and they said we should check SD copy routines but they didn't get very far and I wanted to check if someone has better advice or know how the copy should be set up.
    Please for your advice.
    Thank you
    Nadia

    Hi Rohit,
    Go thr below links:
    http://help.sap.com/saphelp_47x200/helpdata/en/4d/2b911d43ad11d189410000e829fbbd/content.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/4d/2b917843ad11d189410000e829fbbd/content.htm
    http://sap-img.com/sap-sd/configure-intercompany-stock-transport-order.htm
    http://www.sap-img.com/materials/mm-faq.htm
    Steps in configuring STO:
    If you are referring to Inter company STO, pls follow the below steps.
    1) Create delivering plant as vendor in receiving plant’s company code & sales area – XK01
    2) From the vendor number created in step 1, create Vendor info record for the material that needs to be stock transferred.
    3) Ensure material is extended to both plants
    4) Delivering plant must be assigned to the receiving sales organization
    5) In the Vendor info record, go to MK03 and change the “add purchasing data” to delivering plant.
    6) Create receiving plant as customer in delivering plant’s company code & sales area.
    7) Ensure Purchase organization for the receiving plant is maintained
    8) Go to IMG- Materials Management-Purchasing-Purchase Order-Set up stock transport order ( transaction code:OMGN) and complete all the settings.
    Note:
    Maintain receiving plant / customer number from step 6/ delivering sales area
    Delivering plant/ customer number from step 6/ receiving sales area
    Maintain NLCC replenishment for cross company stock transfer with delivery type NB
    9) ME25- Create Purchase Order from receiving plant
    10) VL10B - Create delivery order from delivering plant’s shipping point with reference to the purchase order number raised in step 9.
    Save.        
    11) Go to VL02n & pick /post goods issue for the delivery order number created in step 10
    12) Do VF01 & bill to customer
    In step 8 You have the option of UB type in place of NB
    In step 10 you can also use VL04.
    In step 12 you select F8 type (pro-forma invoice).
    Reward points if it helps
    Regards
    Srini

  • Give me the Configuration steps  for intercompany billing and third party s

    Hi Gurus,
    Give me  the Configuration steps  for intercompany billing and third party sales and give me a brief description with examples.
    Regards,
    YSR

    Dear YSR
    Check the links
    [Cross Company Configuration|http://help.sap.com/bp_bblibrary/500/Documentation/J62_BB_ConfigGuide_EN_DE.doc]
    [Third Party Without Shipping Notification|http://help.sap.com/bestpractices/BBLibrary/html/J55_ThirdPartyWOSN_EN_US.htm]
    Third party order processing is as follows:
    Assume three companies X, Y and Z
    X - The company,
    y - The customer
    Z - Vendor
    When ever X gets a PO from Y to supply some goods, X has an option of either manufacturing those goods or procuring those goods.
    If he is procuring the goods, there are two methods that are generally followed:
    Method 1)
    After receiving the PO from Y, X creates a sales order against Y.
    Now at the same time he also creates a PO to a vendor Z to produce the goods
    Z produces the goods and supplies to X
    X receives the goods from Z
    Then X delivers the same goods to Y.
    After that X invoices Y and Z invoices X.
    Note : Here there is no direct/ Indirect relation between Z and Y.
    This process is known as Trading Process. and the Material here is created  with Material type HAWA.
    The other method is a Third party order processing method:
    Here the glaring difference is that instead of Z supplying the material to X and X in turn supplying the same material to Y.
    X authorizes Z to supply the material to Y on his behalf and notify him once the delivery is complete.
    Now Z supplies the material to Y and acknowledges the same to X.
    Z  will send a copy of delivery acknowledgement and invoice to X.
    After receiving the delivery confirmation and invoice from Z, X has to verify the invoice and this process is known as invoice verification and is done in SAP through Tcode MIRO.
    The next step for X  is to create an invoice and submit to Y
    Only after the invoice verification document is posted  then only X can create an invoice for Y.
    This is the business flow that is followed for third party order configuration.
    There are few steps that have to be configured to enable the system to function as mentioned above.
    Step1)
    If you are always followwing a third party process for a material then you have to create the material using item category group BANS.
    The procument type should be marked as External procurement (F) in MRP 2 view of the material master record.
    if you are not always allowing third party order processing then u can create a material master record with item category group as NORM and the procurement type should be marked as ( X) meaning both types of procurment ( in house manufacturing and external procurement).
    Step 2)
    the item category in the order should be manually changed as TAS.
    For that you need to confugure the item category determination
    ord type + item cat grp + usge + Hiv level = Item cat + Manual item cat
    OR + NORM +      +       = TAN . + TAS
    OR + BANS +       +       = TAS
    Step 3)
    make sure that during the item category configuration for TAS  you need to mark relevnat for billing indicator as F
    Step 4)
    The schedule line cateogry for this type should be CS.
    make sure that you mark  subsequent type as NB - purchase requisition  in this schedule line category as this will trigger the purchase requision order immediately after the creation of the sales order and the PO to vendor is created against this purchase requiesion.
    thanks
    G. Lakshmipathi

  • Need the exact difference betwn Intercompany Billing and Inter-project bill

    Hi,
    Can any one tell me the exact difference between the intercompany Billing and inter-project billing?
    The decision to which should be used in which scenraios.
    also what is the Setup Level Difference in both.
    If you have any white paper / document / note in metalink also on this topic then I will be very happy to have that.
    Thanks very much in advance.
    Regards

    Hi
    Inter project billing may be used within the same operating unit.
    Intercompany billing may be used only accross operating units.
    Inter project billing means the provider organization is charging a separate provider project.
    With intercompany billing provider organization is charging the same project as of the receiver organization.
    With inter project billing the provider project may bill the receiver in any billing method as any contract project. With intercompany billing the billing is based on transfer price rules which may be only applied to actual expenditures of the provider organization.
    There is full list of all setup steps in Oracle Projects Implementation user guide.
    Dina

  • Intercompany Billing and Delivering Plant

    Hi,
      I had selected a delivering plant for my intercompany billing, that was different from the one previously assigned to my sales organisation and company code. However, even after cancelling those assignments, I still cannot use my original plant to process sales orders.
        I keep getting the error message" enter a valid delivering plant"
      Could you tell me how to resolve this issue and oblige?
    Regards,
      Aditya

    Hi,
    check whther the assignemnt for intecompany settings. The Delivering plant should be asigned to the ordering Sales org and distribution channel combination.
    Prasanth

  • Intercompany Billing and GTS Export

    Hello All,
    We have an inter-company billing scenario. As you may know, the Scheduling Agreement (S/A) has the Sales Company code (in this case our sister company in the EU) with the delivering plant in the US.  When the S/A is sent to GTS, because of the company code, it assumes the EU Foreign Trade Organization (FTO). This is not correct, it should be the US FTO based on the delivering plant. The same happens with the subsequent documents (delivery, proforma). 
    In order to correct this, is there development required or is there some standard configuration (on ERP or GTS) to handle this scenario?
    Please let me know your thoughts.
    Regards, Dean.

    Hi Dean,
    Sure, the customer invoice belongs to the Sales Company, but creating that billing document re-sets the billing index so that the inter-company invoice can be created.  And that one belongs to the production company.
    Actually, now I (vaguely) remember, I think you can produce a proforma for the inter-company invoice by setting up a Billing Type with Document Category 5 "Intercompany Invoice" and Transaction Group 7 "Billing Documents".  Please give it a try - I hope you'll find that it produces a document belonging to the US company, without posting anything to the ledgers.  Let us know.
    Regards,
    Dave

  • Diff b/w Intercompany Billing and TPO.

    Hi SAP  gurus,
    What is the diff b/w Inter company Billing and Third Party Order

    Dear Sabina
    Inter Company Billing
    You can set up your system in such a way that one purchasing organization procures material for a plant from a vendor (plant) that belongs to another company code within the same client (corporate group). This is an instance of an inter-company-code stock transfer with an SD delivery and a billing document
    Third Party Billing
    In third-party processing, you place a purchase order with a vendor to deliver goods or perform a service for a third party (for example, for a customer).
    This means that your company does not deliver the material. You forward the order to an external vendor instead, who then sends the material directly to the customer and invoices you.
    Third-party processing is carried out in the components SD (Sales and Distribution) and MM (Materials Management). By creating a third-party item in a sales order, purchase requisition, or purchase order, you can request that the vendor sends the goods directly to your customer. A document can consist of one or more third-party items.
    Thanks
    G. Lakshmipathi

  • HOW TO DO BILLING IN STO BETWEEN TWO COMPANY CODES?

    Hi All,
    I have done sto between two plants of two different company codes.
    PO generated(ME21N)
    delivery in background(VL10B)
    PICK N PGI(VL02N)
    Stock Posting (MIGO)
    All the steps completed and stock overview is also reflected the transfer.
    Now Can any body clarify me about do a billing document should be raised between two plants?
    what is process to track accounts in each company code abt stock transfer?
    Thanks in advance.
    Please clarify with steps to do after MIGO.
    Regards,
    reddyy

    Hi Reddy
    The intercompany there are 2 processes
    Intercompany STO means there is a stock transfer happens between two plants of different company codes
    For that del type used is NLCC order type is NB
    Not del type NL as written by you
    After the STO the suppying company will bill the ordering company that is intercompany billing
    I beleive this is what the process you are trying as per the heading of your thread
    Another is intercompany sales followed by intercompany billing and this is what Mr.Murali had sent settings
    For this no STO is reqd
    The supplying plant will deliver directly to the customer who lies in the sales set up of ordering plant
    NO STO here
    After the supply is over the ordering company will bill the customer F2 inv and the supplying plant will bill the ordering plant/company
    The billing will be between company code to company code that is intercompany
    Scenario 1 is Intercompany STO followed by intercompany billing
    Whatever we move from 1 plant to another is stock transfer
    Scenario 2 is Intercompanysales followed by intercompany billing
    Whatever we supply to the end customer is is sales
    By going tro the initial thread once again you are trying  Intercompany STO only
    The del type you are using is wrong and it should be NLCC
    _I think you are mixed between both as per my knowledge you cant map this as that and that as this
    They both are process wise different_
    Pls tell exactly where you are struck?
    Regards
    Raja

  • Order-related intercompany billing

    Hi
    I know that the standard system only generates an intercompany billing document for the cross-company code sales if a delivery is involved.
    The order-related intercompany billing and the cross company process for service items, leasing and maintenance items and third-party items is only possible with using the sap note 63459.
    I am using ideas ecc 6.0, where in the report required for creation of intercomapny billing ZZIVAUFT is already there. But here it asks for billing documnet & not the Purchase order or sales order.
    Has any body worked on this note. Can i get the deatils how to impliment this note.
    Thanking you
    Vinod

    Hi,
    buddy don't know abt ecc6 but it'll great if you tell me what all need to be done for order related inter comapny billing in 4.7 beacuse i think you know abt it.I gone through with that OSS notes 63459 but could'nt get through with it.Could you expalin.
    I hope will get a response from you.
    Regards,
    SATYA

  • Intercompany billing for services

    Hi,
    I need a few details about intercompany billing, and how is thi set in SAP standard way...
    Is it possible to set that company A create a purchase order for services and another company B creates on this PO sales invoice, and on the company A is then invoice verification done automaticaly.
    Can you please provide me details about intercompany billing?
    Thanks + BR
    Saso

    Hello,
    For this refer intercompany for order related billing.Choose billing type IVA.Maintain copying control accordingly.For services delivery is not required.
    In this when company B provides services to customer and raise intercompany bill to company A, and then company will raise Bill to End customer.
    Follow the std settings of intercompany except copy control for billing type (OR---IVA)
    Revert for further clarification.
    Regards
    Amit Gupta

  • Intercompany Billing  through the EDI

    Hi Experts,
    I have configured the Intercompany Billing and it is working fine. But, I have to do it through EDI so that the Posting in the Delivering company is made automatically through EDI.
    I guess this can be done but I don't know the Steps of Configuration for Intercompany Billing through EDI.
    Regards,
    Jans

    Hi,
    detailed guide on edi intercompany billing:
    http://www.scribd.com/doc/5024013/InterCompany-Billing-IDoc
    Best regards,
    Zuzana

  • Intercompany Billing - Destination country

    Hi,
    The scenario is: There is a Sales order from FR to UK to deliver goods.
    In the intercompany billing document --> Header  --> Tax --> Destination country, i would expect 'FR'.
    But, the system is still considering the Destination country from the Ship-to (RE).
    May i know if i am missing something here.
    thanks & regds
    Narain

    Hi
    I think there is a small confusion between Intercomany billing and Export sales.
    Your case is intercompany billing and it need not be always export.
    As your SH is from FR the destination country will be FR only and this is correct, the only difference is that the delivery is done from a plant from a different company code. The delivering company code can be either from the same country or from different country. This is the intercompany scenario.
    An export sale need not be intercompany. The SH will be from different country and the selling and delivering company codes can be same. In this case, the destination country will be UK.
    I think this makes things clear.

  • Order-Related Intercompany Billing - Copying Partners

    We are using order-related intercompany billing and I need to have one of our custom partner types copy from the sales order to the intercompany bill.  I have not found a way to make this happen.  Can you help?
    Thanks in advance,
    Tracy

    Hi,
    You can copy partner function from Customer master- Add this new partner function in customer master too- Change actual partner number in sales document - you can achieve this
    Thanks
    Chidambaram

  • Intercompany billing Issues

    Hi SD experts pls help for the following issue.
    We are implemented Intercompany Billing, but its Order realted billing, not delivery related, since all materials are service items(Unit of Measure is Per hour Biiling)
    Issue is When i am run VF04 for Creating F2 and IV only F2 is generating IV is not generating.
    As per my knowledge we cant do from Standard process to Implementing Order related billing and Intercompany billing and need to refer some notes,(means its deaviating from Standard process)
    Pls help how reslove this issue and where i can get settings doc.
    regards
    Satish

    Dear Satish,
    Make sure that you have checked the check mark for
    Order related
    and
    Inter company billing under documents to be selected tab in VF04 transaction.
    I hope this will help you,
    Regards,
    Murali.

Maybe you are looking for

  • Single Sign-On and Forcing logins

    Hi I'm new to single sign-on firstly. Is it possible for a company using SSO, to force a user to login again when trying to access a certain web application, in this instance a J2EE application within the company's domain (I know it defeats the purpo

  • Populate drop-down lists based on check box selections

    Hi. I'm creating a Service Work Order form. At the top, there are several check boxes for the various services we provide, under that , more text fields, drop downs and checkboxes to elaborate on those services, and then at the bottom, fields for pri

  • Selective use of a delete trigger

    Is there a way for me to use a delete trigger selectively? I have a table that on certain instances, when a record is deleted the 'deleted' record needs to be inserted into an archive table. On other times, the delete must just delete and no archive

  • Using Concat and Distinct together

    hi I am using the query below and I am getting 'missing expression' error. How do use Distinct and concat together? SELECT 'SELECT ' || DISTINCT COLUMN || ' FROM DUAL UNION ALL ' FROM TABLE;

  • INSERTING DATA urgent

    I am using Ms access for data base how do we insert data. What is the main difference b/w prepared and callable statement.