Intercompany Module and Upload with publish period

Hello Gurus
I have a question two questions.
I am uploading the icp when I uplouad the month balance. For what is the intercompanie module.
If I decided to upload also every invoice to make a better control. i will duplicate the information en de balance.
Where dose the intercompany module write
Dose hfm allows you to upload information if the period is already published when you up load from odi or the hfm task????
I hoppe that I get an a

Is there someone who have experience with uploading with Dreamweaver?
I cant upload because de uploaded sites doesn't appearance in the remote site.
In the FTP-log I couldn't find any error.
If you can help thank you very much.
Henk

Similar Messages

Duplicates. I use iTunes match. When I run exact duplicates, I get duplicates that say uploaded for one and uploaded with a cloud for the other. Which one do I delete?

Duplicates. I use iTunes match. Two questions:
When I run exact duplicates on the library on my Mac Air, I get duplicates that say uploaded for one and uploaded with a cloud for the other. Which one do I delete?
Some of the duplicates say matched and matched with a cloud. Same question - which one should I delete?

I'm not sure I understand the question.
First I would update your iTunes match. iTunes match will tell you what is duplicates and then you can just delete them from the library.
Second, the course in a situation like this is to delete ONE duplicate and see what happens. Make sure you have that song backed up somewhere just incase it deletes it completely. But usually I'd delete one and then see if it deletes both or just the one you pressed.
Thirdly, update iTunes match. It usually does a good job of locating actual duplicates.

My MBA keep downloading and uploading with no obvious reason?

Here is a link to the original post https://discussions.apple.com/thread/3015185
I will go crazy over this one! The problem started almost 10 days ago .
My Mac Book air keeps downloading and uploading KBs ranging from 2 KBsto 30 KBs Ups and Downs (see the attachment please ).
I'm living currently in Amman/Jordan and using Orange 3G+ USB dongle and InternetEverywhere software to connect (check the screen shot).
I also installed Protemac and there was no app I tracked which was the reasonbehind the constant download/upload during idle time .
I did everything; formatted and clean installed Os X , installed antivirus(nothing found ),checked the USB dongle with Windows 7 operating system and tomy surprise everything is fine .
I tried to reinstall the driver many times from http://www.orange.jo/en/software.php and again nothing has changed the same behavior again !
I called Orange tech support and they said if there is no problem with Windows 7 there is nothing that we can do .
What I have noticed is that when I connect to internet the Orange software only downoald 11 KBs and then stopped ,the preoblem start when I open a page on firefox or Safari and then after seconds the activity monitor start to regestier upload and downalod activity (both ways) ranging from 3 KBs ups and 3 KBs downn to 25 KBs Ups and 25 KBs down , this is just like a loop activity .
Should I leave this problem to eat all my bandwidth threshold ,is their something wrong with my MBA ( I hope not )
Please help me with this .

Here is a snap shot of CPA - Cocoa Packet Analyzer,the thing is that I don't know how to translate the packets being sent or received

Editing In Lightroom and Uploading with Picasa?

I have about 10 years of photos organized with Picasa, but I recently bought a D90 moved over to RAW capture and processing. I just got Lightroom, and so far I love it. However, if I do cropping or exposure stuff in Lightroom, and then open the folder in Picasa for uploading, I only see the original, unprocessed images. Is there anyway to make Picasa "see" the edits from Lightroom?
I know there's a plugin for Lightroom to upload to Picasa Online directly, but for now I'd like to keep the ability to at least view and organize photos with Picasa.
Thanks!
John Huntington

Thanks for the response.
Picasa actually works just fine with both DNG and Nikon Raw files, and when you upload from Picasa, it just automatically creates JPG's. It's very convenient, but I prefer the editing tools in Lightroom.
The only solution I see now is to do as you say, but then I end up with two sets of photos which is a pain.
John

Why modulation and demodulation with PXI-5673 and PXI-5663 was wrong%3F

iam using PSK-demodulation-modulation example found in find examples to perform modulation-demodulation for the transmitted signal iam using PXIe-5673 and PXIe-5663 as VSG-VSA
i found that the received bits not as the transmitted bits any help in this issue

iam sending PN sequence or user defined pattern 01010101
the received is not as the transmitted
here i attach the code
Attachments:
MT RFSG Generate PSK.vi ‏53 KB
MT niRFSA PSK Demod.vi ‏89 KB
PN_Sequence_09.txt ‏2 KB

Do I need BootCamp in order to work with Publisher files?

I need to be able to create and work with Publisher files. From what I've read, the only two options are: 1. buy a PC (UGH) and then purchase Windows and Publisher.
OR
2. Purchase BootCamp, Windows and Publisher.
I was hoping that by some miracle, some software company has addressed this. Like Pages or Word.
Any recommendations?
Thanks

You need MS Publisher which is not available for the Mac, there are no compatible programs as far as I know.
Do you need BootCamp? if you are planning on installing Windows natively then yes, or you could run it in a VM, but with less performance usually.
Or buy a cheap PC (with windows) and run it there.

DBMS_APPLICATION_INFO MODULE and ACTION

Hi,
I'd like to use DBMS_APPLICATION_INFO MODULE and ACTION to store some additional logging information (see http://tylermuth.wordpress.com/2010/02/19/logger-1-2-2-released/ and read 2nd and 3rd comments for more info). Would their be any issues of doing this when using an APEX application? I noticed that (from Tyler's logging package) that APEX is storing the Application ID and the Page ID in Module and Action respectively.
Thank you,
Martin
[http://apex-smb.blogspot.com/]

Martin,
As much as I love your train of thought, I wouldn't use module and action with an apex app. APEX is going to set them for you, so as your page draws the values of module and action could change based on the order of who sets them. It makes them a bit unpredictable. You can blame me for this one, as I added it to APEX back when I was on the team. However, I stand behind the decision as it adds a lot of value for most use-cases. Feel free to try it, but I think it will be unpredictable.
The reason I suggested module and action in my response to your comment was that you said "batch" and I don't usually equate batch with an APEX application. Does the p_scope parameter of logger not work for you? Another option is dbms_application_info.set_session_longops (http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_appinf.htm#i996999).
Tyler Muth
http://tylermuth.wordpress.com
"Applied Oracle Security: Developing Secure Database and Middleware Environments": http://sn.im/aos.book

I am having issues with my web module on Lightroom 4 (Mac OS 10.9.5). "an unknown error occurred" while trying to upload to my FTP (no changes in my FTP). Bandaid fix was to export to local folder and upload via Filezilla. However, now that is no longer w

I am having issues with my web module on Lightroom 4 (Mac OS 10.9.5). "an unknown error occurred" while trying to upload to my FTP (no changes in my FTP). Bandaid fix was to export to local folder and upload via Filezilla. However, now that is no longer working and although upload completes, the URL takes you to a "Forbidden - do not have permission to read this file" page. Lightroom is changing the permissions of each file to 000 instead of 644 for index files and 755 for all others. How can I change the permissions settings in Lightroom?

I am having issues with my web module on Lightroom 4 (Mac OS 10.9.5). "an unknown error occurred" while trying to upload to my FTP (no changes in my FTP). Bandaid fix was to export to local folder and upload via Filezilla. However, now that is no longer working and although upload completes, the URL takes you to a "Forbidden - do not have permission to read this file" page. Lightroom is changing the permissions of each file to 000 instead of 644 for index files and 755 for all others. How can I change the permissions settings in Lightroom?

Problems Uploading With Muse FTP And Publishing.

Hi
Please help if you can.
I have finished creating my website and launched it onto Adobe businesscatlyst and it looks fine!
http://magicorganic.businesscatalyst.com/
There is a major problem loading up to my web host. IPage.
Firstly i loaded it with the FTP feature in Muse and it stopped uploading at 61% and I got an error message concerning images.
I then exported the files to My Docs. ( And noted there is no Home Page mentioned just Index) here:
I then uploaded these manually to IPage: Here
and viewed my site www.magicorganic.co.uk and its all over the place. I then tried to upload again using FTP with the files already on the host and it loaded 91% before and error message. See here:
If anyone has any ideas of where to go with this please gt back to me.
Many thanks

They did reset permisssions etc. But by then I had already loaded up every file manually. There was a problem as the CSS files went into the root folder so were not working properly, this is now fixed.
I want to make a few adjustments to the website copy. I have already done this on businesscatalyst, which was painless.
To ensure that copy changes take place do i simply upload with the FTP, as I know the host system will overwrite existing files or is it more complicated? And do I upload all files or selected files?
Please advise
Many thanks
James

Published Flash module and 404 errors in the web server log

I’ve created a Presenter module, published it to my computer, and uploaded all the files to a web server. And it plays fine via the web.
The odd thing is a bunch of 404 errors in the web log:
10.1.2.104 - - [29/Jul/2009:10:36:00 -0700] "GET /repository/university/courses/3/flash/data/spk10821.1.jpg HTTP/1.1" 404 255 "-" 1166 419
10.1.2.104 - - [29/Jul/2009:10:36:29 -0700] "GET /repository/university/courses/3/flash/data/spk10821.1.jpg HTTP/1.1" 404 255 "-" 1166 419
10.1.2.104 - - [29/Jul/2009:10:36:57 -0700] "GET /repository/university/courses/3/flash/data/spk10821.1.jpg HTTP/1.1" 404 255 "-" 1166 419
In the data directory there is a file named spk10821.jpg that was generated by Presenter. The image is actually the presenter bio photo that would normally show up in the sidebar -- but no photo is there. The browser never requests the valid spk10821.jpg file, only the non-existent spk10821.1.jpg path.
Anybody know why this would be happening? I see in data/viewer.xml there is a tag for <image>spk10821.1.jpg</image> but I don’t know why Presenter would mention that file in the XML but generate a differently-named one in the publish folder.
I’m wondering if I should have the web server rewrite requests with the ".1.jpg" ending to get rid of the ".1" part so they will work.
By the way, this is with PowerPoint 2003 SP3 and Presenter 7.0.1.

Hi Daniel,
I am assuming that you are using Visual Studio 2010 to target the .Net framework 4.0
Crystal Reports 2008 is not compatible with VS 2010. Use [Crystal Reports for Visual Studio 2010|Crystal Reports for Visual Studio 2010 Production Release Now AvailableCystlR%2528SAPWeblogs%253ACrystal+Reports%2529] to target .Net framework 4.0.
Deploy the application using the methods specified in the 'Deployment' section of the [CR for VS 2010 .Net SDK developer guide|http://help.sap.com/businessobject/product_guides/sapCRVS2010/en/crnet_dg_2010_en.zip].
See if you can reproduce the issue after redeploying the application as mentioned above.
Few questions-
- Is it the dev machine or production machine causing the issue?
- OS version?
- What does the application do? i.e. view, export, print report?
- Issue is with some reports or all the reports.
See if there is an image on the report, remove the image and add it as a picture object ' Insert --> Picture' from the CR designer.
Hope this helps,
Bhushan.

Function module to choose the file for download and upload

what is the function module to choose the file for download and upload for presentation server.
give me with example

Please search in SCN.
This has been discussed so many times.

I Have iPad4 and using with Aricel Prepaid 3G SIM, How to check my VAlidity period and balance amount through iPad?. pls help me

I Have iPad4 and using with Aricel Prepaid 3G SIM, How to check my VAlidity period and balance amount through iPad?. pls help me, M.Kumar, Chennai,
<Email Edited By Host>

There are 2 concepts attached to a bank balance. The balance as per your books of accounts and another is the balance maintained with the bank. I believe i need not explain these 2 concepts. These 2 balances can be obtained from Oracle system provided some of prerequsities are met with.
Balance as per your books - This is nothing but the GL balance available. In order to obtain balances for each bank accounts, it is advised that each bank account should have a separate account code combination. This is achieved generally by having a separate natural account for each bank. The code combination is attached to the cahs account for each bank. By maintaining separate account code combination, the balance in each code combination can be obtained from GL (provided transactions are accounted and posted in GL). These balances represent the balance for each bank according to your books of accounts. You can create an FSG for this purpose and provide the same to the customer, so that they can run the same whenevr they want.
Balance as per bank - This balance is maintained by oracle in 2 ways - either the bank balance can be manually entered for each bank account for each date (quite cumbersome). Else, while loading the bank statement, the bank balances are also loaded. There are various types of bank balances stored - value dated balance, available balance, float balance etc. Depending on the balances provided by bank along with the bank statement, the bank balance can be recorded in oracle system. After the bank statement is uploaded and balances stored, standard cash management reports are available to query for the bank account balances. In order to view daily movement, the bank statement should be loaded on daily basis.
Hope this helps.
Vinit

Help needed with header and upload onto business catalyst

Can someone help with a problem over a header please?
I have inserted a rectangle with a jpeg image in background, in the 'header' section, underneath the menu. It comes up fine on most pages when previsualised, going right to the side of the screen, but stops just before the edge on certain pages. I have double checked that I have placed it in the right place in relation to the guides on the page.
That's one problem.
The second problem is that I tried to upload onto business catalyst, which got to 60% and refused to go any further, saying it couldn't find the header picture, giving the title and then u4833-3.fr.png. The picture is in the right folder I have double checked. And it isn't a png. Does it have to be ?
And the third problem is that I got an email following my upload from business catalyst in Swedish. I am living in France.
Can anyone help ? Thanks.

Thanks for replying,
How can I check the preview in other browsers before I publish a provisional site with BC?
The rectangle width issue happens on certain pages but not others. The Welecom page is fine when the menu is active, also the contact page, but others are slightly too narrow. Changing the menu spacing doesn’t help - I was already on uniform but tried changing to regular and back.
In design mode the rectangle is set to the edge of the browser, that’s 100%browser width right?
Re BC I have about 200 images on 24 different pages and it seems to be having difficulty uploading some of them. But it has managed a couple I named with spaces but not others I named with just one name.
Is there an issue on size of pictures ? If I need to replace is there a quick way to rename and relink or do I have to insert the photos all over again?
I’m a novice with Muse with an ambitious site !
Thanks for your help.
Mary Featherstone
Envoyé depuis Courrier Windows
De : Sanjit_Das
Envoyé : vendredi 14 février 2014 22:15
À : MFeatherstone
Re: Help needed with header and upload onto business catalyst
created by Sanjit_Das in Help with using Adobe Muse CC - View the full discussion
Hi
Answering the questions :
- Have you checked the preview in Muse and also in other browsers ?
- Does the rectangle width issue happens when menu is active , or in any specific state , Try to change the menu with uniform spacing and then check.
- In design view the rectangle is set to 100% browser width ?
With publishing :
- Please try to rename the image file and then relink
- If it happens with other images as well , see if all the image names includes strange characters or spaces.
- Try again to publish
With e-mail from BC :
- Under preferences , please check the country selected.
- If you have previously created partner account in BC and selected country and language then it would follow that, please check that.
Thanks,
Sanjit
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6121942#6121942
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6121942#6121942
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6121942#6121942. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Help with using Adobe Muse CC at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

HT5457 Help! I used to upload photos via ios and it was always published up to my 5th photos, but on the 6th, it just go to ios photos album and was not published on my fb's timeline...

Help! I used to upload photos via ios and it was always published up to my 5th photos, but on the 6th, it just go to ios photos album and was not published on my fb's timeline...

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Publishing (uploading) with Netscape Composer to non-.mac server

I'm new to iWeb. Created a simple one page site with a photo and some text, and Published to a Folder (on my desktop). Uploaded all the files to my server webspace (as instructed by them using their File Manager service). Transfer went OK, but viewing the webpage did not. First, the URL had to be all lower-case (didn't work with any caps ...result = "not found"). Secondly, only the text in the page appeared; the photo and other graphics were replaced with little squares encasing a ?-mark.
After several attempts (and discussion with server's tech support) I decided to use Netscape Composer to "publish" (upload) the files to my server. Not only was it much easier than using my server's File Manager, but the site WORKED!! So now, I use iWeb to create/update my page, but use Netscape Composer to upload it to my server.
Still, however, the URL has to be entirely lower-case, or I get the "not found". Minor inconvenience. When I type in my URL, the browsers automatically add the extension "/Welcome.html". I have to change the 'W' to 'w'.
Comments as to why it wouldn't work with the first method?____
For browsers, I used latest versions of Safari, Firefox, and Netscape Navigator.

Comments as to why it wouldn't work with the first
method?____
Because "file managers" are usually garbage and won't allow you to preserve the structure of an iWeb site, so that it won't work right. It is best to always use a real ftp program. Some tips are here:
http://homepage.mac.com/thgewecke/iwebserver.html

Intercompany Module and Upload with publish period

Similar Messages

Maybe you are looking for