Intercompany STO - PO not showing in VL10B

Dear all,
In my company I have an intercompany STO between 2 plants A and B.
However, when I try to run transaction VL10B, the PO is now showing.
To solve the problem I tried to remove the dates and shipping point in VL10B without sucess.
I have checked the PO and I have the shipping tab there for all the materials. I have also checked if the PO needs to be released and it's already released.
I also notice that the products that are being ordered do not have sufficient stock to be shipped. Can this be the reason why the PO is not showing in VL10B?
Thanks in advance for your help.
Joã

Dear all,
Thanks for your answers but both of the solutions had been tried before without sucess.
I thank you in advance for any other ideas.
Thanks,
Joã

Similar Messages

STO sometimes not showing shipping point

I have some scenarios where creating STO where line one has a shipping tab and then add line two same plant the shipping tab does not show. If i remove the plant and add it again it populates or if i delete the line and add it again it populates. The plant is set up as a vendor and customer. It happens quite a bit but i can not recreate it.
Thank you

Hi Mark,
there are different kind of shipping data determination for STO.
for example, STO within the same plant, but different storage location, between different plant and etc.
If it is within the plant, then you need to check if shipping data has define for the destination storage location,
if it is between 2 different plant, then you need to check if the shipping data has maintained for the destination plant-storage location.
Do let me know what is your process for this STO?
Thanks and regards
Chee Wee

STO: PO Not occuring in VL10B

Hi Friends,
I have configured a STO but here I am not able to get Shipping tab in STO. Can you suggest me how to get Shipping tab at item level in STO.
Kraheja.
Kraheja.

Hi,
Maintain sales view in MMR for issuing plants.
Ensure shipping point is assigned to issuing plant.
customer master is to be assigned to your recieving plant in
SPROMMPO-setup STOdefine shipping data for plants
maintain sales area data for issuing plant in
SPROMMPO-setup STOdefine shipping data for plants
Regards,
Deepak.

Stock Transport Order (STO)will not create delivery

I have created a intercompany Stock Transport Order (STO) and it has created the shipping tab in the Purchase order(PO), and all seems to be correct.
I have material in the plant, yet when I go to create the delivery using VL10G, the PO does not show as a choice. I also do not get an error, so I cannot tell why it is not creating the delivery.
Is there a way to see an anaylis of why the STO is not showing as a choice?
Thanks,

Hi,
Please check the delivery date in the STO created.and adjust the del creation date etc input fields at VL10G and try the posting.If there exists no error in the po created.

STO's are not showing up in VL10I Transaction.

Hi Gurus,
I have a scenario wherein the delivery has been created for the 1st line item of the STO. when we try creating the delivery for the rest of the line items in the same STO, they dont show up in the VL10I screen. Could you please help me out in sorting this.
Note: The stock is available.
Purchase Order is an Intercompany STO.
Regards,
Trishul

Trishul,
First review the log for the messages. What does it say?
Generically, anything you place in the VL10* selection screens are RESTRICTIONS, which means that these parameters will limit the number of proposals that will be displayed. Review all screens, and eliminate any entry that does not match up with the order you seek to deliver.
Also, check the shipping section for the customer assigned to the destination plant. You can check this in the customer master (XD03; enter cust and Sales Ord/Dist channel, display Sales org data, select 'Shipping' tab). See if the customer is disallowed for partial deliveries.
Rgds,
DB49

Intercompany STO Delivery Creation

Hi Experts
Scenario: Intercompany STO Delivery creation.
When delivery creation though Tcode - VL10B, in the shipping side if no enough stock, is it possible stop creating delivery orders and to throw error.
I dont want to use the P.O side ATP check settings, as P.O raising shouldn't be stopped.
Appreciated your help.
Regards
GJ

Hi
OVLP - Avilablity Check Indicator is Set Blank already.
However, currently even if no stock also still the delivery order able to be created by VL10B. Just only can't do PGI.
Requirement is First place the delivery creation in VL10B itself to stopped by showing error as deficit of stock for the material.
All the settings in Purchasing --> Purchase Order --> Setup stock transport order seems it relevant to the Purchase Order not to control the delivery creation.
Appreciated further advise.
Regards
RG

Intercompany STO

Hi
Intercompany STO Process:
I am creating the Delivery for Intero-STO using Tcode: VL10B.
But, when there is no sufficent stock in the shipping plant side, the D.O is not get created. Also there is no any error message shown stating pertinent to delivery failure (or insufficent stock).
Also, I have choosen the C Delivery proposal option in config on below path.. However there is no any delivery proposal is being shown to select...
SPRO --> Material Management --> Purchasing --> Purchase Order --> Set up Stock Transport Order --> Assign Delivery Type and checking Rule : Avilablity Check Rule: C (Delivery proposal) & Checking Rule: B SD Delivery
Can anybody advise how to fix.
Regards
RG

Hi,
It seems you know the reason why a delivery is not created -> lack of stock.
But according your explanation, no logs are shown into V_sa. Related with this,
check if your user role used into VL10b has fields:
"log by request" and "log after delivery creation" with values.
I hope this info helps!
david

Material division in Intercompany STO Invoice

Hi All,
We have Intercompany STO scenario with Billing.However when we create an Invoice with the delivery created for an intercompany Purchase order the division in the line item of the invoice shows 00( cross division) and not the division of the material from the material master.
When we do a billing( with refernce to a delivery) for a regular Sales order the division in the billing document line item shows the corresponding one in the material master.We have different Billing type for Intercompany STO and Sales order.
Kindly let me know if i am missing some configuration or if i can achieve this only using custom exit.
Regards,
Ajay

Hi Ajay,
To get the Item Level Division in the sales order we have to check Item Dbision check box in the Sales document type maintenance.This would result in the division of the Item in a sales order to come from the material. Where as the Inter company STO has no sales order and the division at the header level would be from the Intternal customer which is your recieving plant. And in sales order ,we have a provision to check If the Item Level division and the header level division differs, system will throw an error or warning message based on the configuration we make in VOV8. But in Inter company STO we will be Invoicing the Recieveing plant wchich will be assigned to particualr Inter company billing division, the Billing document will have that particular division. Check to whcih sales area(Interco Billing Div) your plant has been assigned to by going to
SPRO-IMG-MATERIALS MANAGEMENT-PURCHASING-SETUP STO-DEFINE SHIPPING DATA FOR PLANTS.
Kindly please let me know If you need any more Information on this.
Regards
Ram Pedarla

Intercompany STO excise invoice

Dear Experts,
We are doing intercompany STO with excise invoice. First we create Purchase order, then do the background delivery through VL10B, then VL02N for PGI. Till this step, everything is coming properly. Our problem starts at billing level. Our queries are
1. How purchase order price will get reflected in billing
2. Can we generate the excise invoice based on our billing
3. Effect on Excise register
Kindly help us.
Thanks & Regards,
Reji

As Per my knowledge
1. How purchase order price will get reflected in billing
Pricing procedure will get triggered in Proforma Billing document not from Purchase order.
purchase order will be created with ZREO Value.
2. Can we generate the excise invoice based on our billing
Yes , we need to create Excise invoice with ref to Proforma Billing
3. Effect on Excise register
Yes, It will effect in RG1 register.

Movement type for goods issue in intercompany STO business scenario

Hi, everyone,
In intercompany STO scenario, firstly we should create a purchase order with a transfer order type just like as UB,
then we use T-code: VL10B to create the delivery note by referencing the purchase order created in first step, in succession, billing, goods reciept.
Actually I have a question about the movement type in goods issue process. The standard is 643 deliveried by SAP.
Can I customize the movement type in intercompany STO business scenario

hi,
The following are the scenarios of cross plant goods movements:
Alternate plant procurement of purchased items
Alternate plant production
Plant-to-plant goods transfer of grouped project stock
Stock transfer without reference to a stock transfer order (STO)
1 Step 301
1 Step reversal 302
Stock transfer with reference to an STO in the receiving plant without SD
2 Steps - 351 and 101
2 Steps reversal 102 and 352
Stock transfer with reference to an STO in the receiving plant with SD delivery
2 Steps 641 and 101
2 Steps reversal 102 and 642
1 Step 647
1 Step reversal 648
Movement Type & Description
301 / 302
Goods receipt into production order in another plant. This is a one-step, cross-plant stock transfer. This movement type does not use STOs but behaves like a goods receipt of stock, except that the stock comes from another plant into the current plant. Movement 302 is the reverse of 301.
351 / 352
Stock transfer that is in transit between two plants. This is a twostep, cross-plant stock transfer, because after movement 351, you do not immediately see the stock in the receiving plant. After movement 351, the stock is in transit between the two plants. Only after you have performed a goods receipt (movement 101/102)of this in-transit stock into the receiving plant can you see this stock in the receiving plant. Movement 352 is the reverse of 351.
641 / 642
Stock transfer that is in transit between two plants, with delivery documents (Sales and Distribution). This is a two-step, cross-plant transfer of stock, because after movement 641, you do not immediately see the stock in the receiving plant. After movement 641, the stock is in transit between the two plants. Only after you have performed a goods receipt (movement 101/102 ) of this in-transit stock into the receiving plant can you see this stock in the receiving plant. Movement 642 is the reverse of 641.
647 / 648
Stock transfer to another plant, with delivery documents (Sales and Distribution), with STO. This is a one-step, cross-plant stock transfer because after movement 647, you cannot immediately see the stock in the receiving plant. The stock is never in transit with this movement type, but the stock is transferred with reference to an STO with Sales and Distribution documents. Movement 648 is the reverse of 647.
regards,
Siddharth

Intercompany STO vs Sale-Purchase

Hi,
What advantage does Intercompany STO provide over Sale-Purchase between two co. codes. As far as steps are concerned - there is not much difference. Are there advantages from accounting point of view ?
Why MIGO and MIRO are reqd. in intercompany STO?
Thanks

Hi,
Advantages? You save steps, ie. clerical work. For instance, with the PO you save one document. It works as a PO for the buyer and as SO for the plant provider. From this PO you can create a delivery with VL10B or VL10D.
You can manage the stock in transit. So, you need to run MIGO. Why MIRO? You need to invoice deliveries too (VF01/VF04).
I hope this helps you
Regards
Eduardo

Intercompany STO - Reverse Process

Hi Gurus
What is the process/config steps for the intercompany STO reverse process.
Forward is: NB (PO) --> NLCC (Delivery) --> IV (Billing). No sales order involved.
Please advise the reverse flow and necessary configs involved.
Regards
RG

Hello,
As per standard practice for managing intra compnay or intercompnay stock transfer return, you can use the followig process;
1.Create stock transport Purchase order and also tick mark the retrun indicator in the item overview.
2. Now create delivery(return) with VL10B. You must have already customized delivery type and item category settings in customization
For inter company transfer , use delivery type NCR and item cateory as NCRN
For intracompany transfer , use delivery type NLR and item category as NLRN
3. Goods reciept : Do the goods reciept for inventory management with movement type 101 , where as system will do the goods issue for return order with corresponding movement type 161.
4. Post goods Issue wihch in this case will act as post goods reciept.
Go to VL02N and do the Post Goods Issue
With this the system posts the goods receipt in the background.
For Cross-company-code:
With Two-step procedure movement type is 673
With One-step procedure 675
The goods receipt is automatically posted with movement type 161.
For Intra company code:
With Two-step procedure the movement type is 671
With One step procedure the movement type 677
The goods receipt is automatically posted with movement type 161.
I also suggest you please go through SAP OSS Note 430074 - Advice note plant return / store return which will help you in setting up the Stock transport returns.
BR,
Tushar

Material description is not showing in VL10H

Hi All,
I am running the report VL10H and facing a problem, step which is being followed by me, given below:-
1.Put plant and delivery date and execute.
2.click on label Edit -> Show/hide delivery.
3.Chose the field u201CMaterial descriptionu201D from Layout for output field.
Now here I am seeing that all the materials in this report, having SD Doc i.e. delivery has been created,
Material description is showing and remaining materials which have no delivery (showing in green color),
Material description is not being shown.
Can anybody suggest me regarding this?

Tiwari Himanshu wrote:
Yes there is no issue regarding description maintained in the material master.
>
> If you run the VL10H as steps, I have given above, then you will see Material descriptions comes only those material which delivery are pending for creation, all those which delivery is posted not showing material description.
now you are just telling it the other way around:
Now here I am seeing that all the materials in this report, having SD Doc i.e. delivery has been created,
Material description is showing and remaining materials which have no delivery (showing in green color),
Material description is not being shown.
I tested it, and all my sales order and STO order items are showing a material description.
I do not have any items shown which have already deliveries created
About which description are you talking, as I can see 2, one at item level and another one at header level ?

Partial Quantity and Line item not showing in MIGO

HI All,
My User create STO and after save it is automatically created OBD and PGI through BARCODE now problem is at the time MIGO it is take partially quantity.when i going to do manually rest quantity it is not showing all line items.
Issue 1. It is showing only one line item instead of two line item Qty.
2. When i am going to select purchaseorder at migo instead of OBD its showing two line item.
Please suggest what to do.

HI Please check i am sending screen shot

Removal of stock in transit in case of Intercompany STO

Hi Gurus,
Problem : User was not able to set the delivery completion flag in the Intercompany STO because the goods issue qty is greater than that of goods receipt qty at the receiving plant. For that solution is given in the SAP note 167795.
I am yet to implement the note but wanted to know how to clear the stock in transit (after setting the del. completion flag in PO) in case of IC STO, because it is considered as virtual stock in transit.

Hi Sandip,
the stock in transit for CC STOs is virutal as you said. It's always calculated from the GI and GR quantities. The actual formula is EKET-WAMNG - EKET-WEMNG. Until the GR and GI quantities ain't the same, it won't be cleared. You may want to have a look at SAP note 100690, too.
Cheers,
Attila

Intercompany STO - PO not showing in VL10B

Similar Messages

Maybe you are looking for