Intercompany STO with CIN

Dear Gurus,
I am facing a genuine problem, am not sure whether you have faced the same problem in your company.
we are running on a global system, by taking this advantage our India company will use intercompany STO for importing the goods into their Mfg plant and warehouse(depot) with supplying plant as the plant from other county.
There is no problem with excise capturing(J1IEX) for the GR done in Mfg plant.
But i am facing problem with excise capturing (J1IG) for the GR done in warehouse (Depot). I found in program SAPMJ1IG there is a check for CIN customizing (J_1IWRKCUS) of sending plant as well. As our vendor is a plant from other county there will not be any CIN customizing for that plant, is there any solution for this scenario, pls advice.
Hoping for a early reply...
Thanks in advance.
SUN

Dear Niti,
Thank you for your reply, i thought about your solution but it is more risky and easy to commit mistake because of the assesable value change frequently.
I am thinking of raising OSS note as it doesnt make sense for J1IG program to check for CIN customizing always??? with out having a check on whether the supplying plant is with in India or not. I belive it should be simple check by validating the supplying plant LAND1 that SAP can implement in J1IG program.
I am thinking to wait for some more days before raising OSS for any realistic solutions for this issue.
Thanks in advance.
SUN

Similar Messages

Intercompany STO with Delivery & Billing- Return STO

Hi Everyone,
Currently I am doing Intercompany STO with Delivery and Billing, which is working perfetly fine.
We create 1 Purchase order for 1,00000 LB and it will be finish after 6 months ( we provide schedule to supplying plant weekly for next 6 month, how much they have to ship ) Some times we received less quantity from supplying plant lets say weekly they have to sent 100 LB but they sent only 85 LB in last week of month and I have to close the sales.
In this can I use Return STO process ? I dont want to adjust quanity in next shipment because I have to close sales.
Some times at the time of GR we found that they have send 85 qty and sometimes we finished GR and Invoice then we get to know later that qty was less.
Return process
- Create return PO with Returns check in PO (NB)
- Create delivery , Vl10B
- PGI
- Credit memo
is this right process?
Thanks
Shree

Slight change in your return process.
Your Return process.
Return process
- Create return PO with Returns check in PO (NB)
- Create delivery , Vl10B
- PGI
- Credit memo
Correct process :
- Create return PO with Returns check in PO (NB)
-GR with 161 MVT type
- Create delivery , Vl10B
- PGI
- Credit memo
Returns :
Case 1 - At the time of GR
Case 2 - GR and Invoice both done
You can follow same process to the both scenarios as you are creating new PO for returns.

Plz help me in inter sto with cin

Hi,
can any help me, what Transaction codes has to be followed for inter company code with CIN .
i know inter company sto cycle without CIN , here i have requirement that Inter company STO with excise duties.
Thanks in advance,
Rgds,
K.Praveen

Hi,
In Inter company STO with CIN
Create STO in recieving plant & send to Supplying plant
Include the excise duties in the STO in the condtions.
Supplying plant do the Outbound Delivery in VL10B for that STO with post goods issue with 641 mvt type
Billing document will be created with reference to Delivery doc no
Create the Excise invoice in J1IIN transaction with reference to Billing document.
Send the Excise invoice along with material to Recieving plant
Recieiving plant will do the Goods receipt with respect to the Outbound delivery in 101 mvt type
Recieiving plant will Capture & post the excise invoice in MIGO or J1IEX.
Excise registister will update as per the posting.
rgds
gsc

Intercompany STO with billing_pricing procedure

Hi Experts,
Need opinion
The scenario is Intercompany STO with billing in IS-Retail
here Client need Basic price plus discount
so which Standard pricing procedure available in IS-retail
and what are the condition type should involve in that pricing procedure to map above scenario
thanks in advance

Hi Hanumant,
Standard pricing procedure is RM2000 and condition type are P101,FRB1,FRC1 and GRWR.
Regards
Mohanavel

Intercompany STO with inbound delivery with freight....Urgent

Hi,
I have following scenario to map.
There are 2 company codes A & B and a shipment of goods is to be transferred from A to B.
I wish to use Intercompany STO process with UB.
However, A & B are geographycally separated so there involves transportation costs which will be beared by B.
How can I have the pricing procedure if I wish to have one in STO ?
If I create some freight conditions then I can add the values but I will not able to know the exact freight charges till B receives the shipment and the invoice for the same.
In this case how can I use pricing procedure ?
If I do not enter any freight charges in PO then how can I add them before I do the GR in B as this is requirement to add freight costs on material at the time of goods receipt so to arrive at exact landed cost for that material in B.
Once I wish to transfer the goods from A to B, I will do delivery so that stock gets reduced from A otherwise if I wait till the stock is physically transferred to B and then B changing the PO and add freight and subsequently doing picking, PGI and GR ,it will not correctly reflect stock positions in A.
What is the better way I can map this process.
If I wish to use inbound delivery before receiving the goods in B can I add conditions in Inbound delivery ? If so how it can be done ?
So my intended procedure will look as
Intercompany STO-UB
Outbound Delivery
Picking/PGI
Inbound Delivery with freight
GR
Please suggest as this is very critical and important requirement
Thanks in advance
regards,
manOO

Hi,
Thanks for the feedback.I wished to use NB but I don't want to go with the regular NB and subsequent billing cycle.
I want to use UB.
Anyways, is there any way by which I can have freight cnditions added at the time of Delivery.Be it Outbound or Inbound.
Please suggest.
Thanks in advance
Regards,
manOO

Intercompany STO with consignment processing

Has anyone faced this situation? I have a client who would like to use consignment processing for VMI orders but as the goods do not get stored at the sales organzation/plant/company code that owns the order - they need to procure the goods from another company code? This is almost a mixture of the Intercompany sales process and VMI processing in ECC... Thoughts?
Example:
Company, plant A / Customer 999999999 / Part A - Stock "0"
Company, plant B / Part A - Stock "1000 pieces"
Preferred Sequence:
1. Create the VMI fill-up order KB for customer 999999999 (delivering plant is B, but the sales order belongs to sales org "A")
2. Create the delivery for the VMI fill-up order from plant b
3. Post goods issue for delivery from plant b
4. Create an IC billing document IV between company code B and A (for the goods that have shipped to the customer's consignment location for company A)
5. In MMBE see that the goods are consigned to customer 999999999 for plant A and NOT plant B. Currently, it is not treating the delivery as an intercompany order (as it is consignment and still owned by the other organization). The stock shows under consignment at plant B.
We are trying to decrease the steps from standard processing which would be the following:
1. Create the VMI fill-up order KB for customer 999999999 (delivering plant is B, but the sales order belongs to sales org "A")
2. Create the delivery for the VMI fill-up order from plant b
3. Create an IC STO from Company B to Company A
4. Create a delivery to move the goods from B to company A.
5. Create and IC billing document
6. Post GR for the goods when they arrive in company A.
7. PGI the delivery for the delivery from step 2 to move the goods into consignment.
8. In MMBE see that the goods are consigned to customer 999999999 for plant A

Hi Manoj,
Please confirm the following for your set-up
I have configured same consignment process for our client.
the process flow like this
--> Fillup order
-->Fillup delivery
-->STO (Purchase order) (through batch job) ***DID YOU RUN MRP AT THE RECEIVING PLANT TO CREATE THE IC STO? WHAT MASTER DATA SET-UP/CONFIG DID YOU PUT INTO PLACE? FOR CONFIG, I AM ASSUMING THE STANDARD IC STO CONFIG IN THE MM/PURCHASING/IC STO SECTION...
--> replanishment delivery (through batch job)
PGI of rep delivery
--Intercompany invoice if intercompany sales.
-->MIGO****SOUNDS LIKE THIS WAS STILL A TWO STEP PROCESS TO MOVE THE GOODS INTO THE RECEIVING PLANT WITH A GR USING MIGO AND THEN THE FOLLOWING STEP YOU MENTION BELOW TO MOVE THE STOCK TO THE CUSTOMER'S CONSIGNMENT LOCATION. IS THAT CORRECT?
--MB1B with movement type 631 (through batch job)****HOW DID YOU CREATE THE BATCH JOB TO POST THE MOVEMENT? THIS IS USUALLY A TRANSACTION RUN MANUALLY (UNLESS YOU HAVE CREATED AN INTERFACE THAT HAS THE INFORMATION TO POST)...

Third party+ intercompany STO with billing ???????

Hi Experts.
Would like to take ur inputs.
My Client has 2 Company Codes 1000 and 2000
The 1000 Company code has 2 Distribution Centres- A001, A002.
And Company Code 2000 has 2 Sites-B001, B002.
My Client 1000 Company Code procures on Behalf of 2000 Company Code and sales the Material on a Specific Margin from 1000 Company code to 2000 Company Code.
Site B001( Company Code 2000 ) will raise P.O to Distribution Center A001 ( Company Code 1000 ) and then Distribution Centre A001 ( Company Code 1000 ) will raise P.O to the External Vendor.
a) How Can we inter-Link the respective transactions between Site B001 to Distribution Centre A001 and from Distribution Centre A001 to External Vendor ?
b) Is it Possible to Farward the raised P.O from Site B001 to Distribution Centre A001 to External Vendor ?
Please advice your valuable input on this.
Thanks in advance
Best Regards

Hanumant Nimbalkar,
1. a) How Can we inter-Link the respective transactions between Plant B001 to A001
Plant B001( Company Code 2000 ) will raise P.O to Plant A001 ( Company Code 1000 )
We use the Inter Company stock Transfer with Billing
Partis involved:
1. End Customer
2. Supplying Plant
3. Receiving plant
2. from A001 to External Vendor
Plant A001 ( Company Code 1000 ) will raise P.O to the External Vendor.
We use Third Party process
Process.
1. First Company code 2000 - Plant B001 will raise a P.O to Company Code 1000 - Plant A001
2. The Company code 1000 Receives the PO and Finds it has not stock within its plant
3. The company code 1000 will raise a new PO with reference to PO sent by Company code 2000 to its vendor.
4. The Company code 1000 asks the vendor to deposit the material in their plant site.(by providing plant A001 Address)
5. The Vendor will raise an invoice to the Company code 1000
6. Now From the company code 1000, from plant A001 STO will be performed keeping receiving plant as 2000
7. An Intercompany invoice will be raised by plant 1000 to plant 2000
8. The Plant 2000 after the receipt of the material / invoice will pay to Company code 1000
9. The Company code 1000 in return will settle the vendor invoice.
Regards
Sathya

Intercompany STO with billing through a third plant

Hi
I have the following scenario:
Stock transfer happens between 2 plants in 2 different company codes and billing happens through a third Plant which is in a 3rd company code.
The supplying plant delivers the goods to the destination Plant and bills the billing plant. The billing plant in turn adds it's margin and bills the destination Plant. Destination Plant pays the billing plant. Hence the following documents are required at a minimum:
1. STO between Supplying plant and destination plant with the price to be paid by the destination plant. Invoice presented by will be the 3rd plant
2. Supplying plant creates the delivery and the transfer price in the delivery will be the price to be paid by the billing plant to the supplying plant
3. Supplying plant creates the billing document on the billing plant
4. Billing plant should be able to pay through an A/P invoice i.e. thru MIRO
5. Billing plant should in turn be able to create billing to the destination plant
6. Destination plant should pay the billing plant through MIRO.
Can anyone pls explain how this entire process is possible in standard SAP

hi,
kindly go thru the below mantioned thread,this will help you
http://forums.sdn.sap.com/thread.jspa?threadID=1326481
regards
sumit simran

STO with CIN??

hi experts
Can anybody explain me the STO process step by step from Mnaufacturing plant to DEPOT.
How its being done in SAP.
Explain me the full cycle, for eg, the sales order the created from DEPOT to Manufacturing plant ....then...
what are the steps to be carried out upto delivery and billing from DEPOT for same sales order .
In between , MRP run, availabilty check, PR,PO..etc , Full cycle with clear explaination steps
Thanks
SAP-MM

Say after u get the order for customer u depot dont have ABCD material
1 Depot Plant Create sto Me21n for ABCD from mfg plant say 45000012
2 MFG plant send the material against STO MB1B 490000245
3 MFG plant Creates Excise invoice against this MB1B document (490000245)J1IS say EI 000231 date 31/12/09
4 Depot plant do GR against Sto MIGO and create entry for RG23D reg wrt Excise invoice recived form MFg plant (enter same excise number(000231 date 31/12/09) that is send by mfg plant in excise invoice number and date)
at this stage ur RG23D reguster has ABCD against EI 000231
Create a Saleas order VA01
Create outbound delivery VL01N
do Picking VL02N
Do PGI VL02N
Create Excise invoice for customer J1IJ against delivery (in this u will have to select the excise invoice (000231)against which u have Purchased the material so that same excise values are forwarded to the cstomer)
Creat bill VF01
hope this helps

1.STO WITH CON 2.STO WITH DELIVERY.3.STO WITH 2STEP 1 STEP

Hi gurus
please give procedure for the following activities in the sap
1.STO WITH CiN
2.STO WITH IN-DELIVERY AND OUT-DELIVERY.
3.STO WITH STEP 1 STEP
please ............
regards

please forward the details

InterCompany STO Delivery Date

I have one Intercompany STO with four line items. Two deliveries are getting created. Transportation Group, receiving plant are same. Delivery date in shipping tab is also same. Delivery date in OBDs are different. Kindly help.
Regards,
Ram.

Hi,
When you create the ourbound the delivery, the system checks the existing schedule line under "delviery schedule" tab. and SD scheduling will recalcualte all date in function SD_SCHEDULING.
Please check your "delviery schedule" tab, also, please check document http://service.sap.com/sap/support/notes/1469092
BR

Intercompany STO excise invoice

Dear Experts,
We are doing intercompany STO with excise invoice. First we create Purchase order, then do the background delivery through VL10B, then VL02N for PGI. Till this step, everything is coming properly. Our problem starts at billing level. Our queries are
1. How purchase order price will get reflected in billing
2. Can we generate the excise invoice based on our billing
3. Effect on Excise register
Kindly help us.
Thanks & Regards,
Reji

As Per my knowledge
1. How purchase order price will get reflected in billing
Pricing procedure will get triggered in Proforma Billing document not from Purchase order.
purchase order will be created with ZREO Value.
2. Can we generate the excise invoice based on our billing
Yes , we need to create Excise invoice with ref to Proforma Billing
3. Effect on Excise register
Yes, It will effect in RG1 register.

Intercompany STO for Non-valuated materials

Hi,
we a scenarion Intercompany STO with Non-valuated mateiral. In which we are doing. STO, Delivery, GI and GR.
After GR, its creating account documents. As the material is non-valuated in both of the plants, why this Acconting doucments are being created. One of the suggestions is there should'nt be any accounting documents.
Please advise.
thanks in advance to all of you.

Hi Rajendra,
When you checked "GR Non-valuated": As the term is self-explanatory, the goods item will not be valuated at the point of GR. If this box is not checked, then the valuation will take place at the point of invoice verification. As such, no Accounting documents will be posted.
When you removed the checked box "Inv. Receipt": This indicator will determine whether you want an invoice receipt to be linked to the line items. If it is checked, then an invoice verification will follow. However, as you have done (by removing the check box), the goods for this line item will be treated by the system as free-of-charge delivery instead, hence no Accounting doc is posted.
Hope this clarify your doubts..
Thanks.
Rgds.

CIN Pricing for the Intercompany STO

Hi All,
I am doing a Inter Company stock transfer Process.I have created a Pricing structure for the Inter company stock transfer Pricing.
PO is created through the MM module nad in PO I can see the Priceses are maintained but when I am creatng Delivery I am not getting any value in the condition TAB.
Can any one explain how the Price from the PO will appear to the SD pricing Procedure.
This Intercompany Process is CIN dependent.
Please explain me.
Regards
Venkat.

Hey the PO Pricing procedure is not required...its to load cost and all at the receiving plant and there is no need to view pricing at delivery level
you have to configure like:
1. SPRO>SD>Basic Function > Pricing >Pricing Control>Define And Assign Pricing Procedures>Assign document pricing procedures to billing types that is for you IV billing type it must be I
2. 1. SPRO>SD>Basic Function > Pricing >Pricing Control>Define And Assign Pricing Procedures>Define Pricing Procedure Determination and here on combination of sales area and Billing doc pricing procedure i.e. I and with customer pricing procedure maintain you Pricing procedure and call all there record and use these conditions
This will help you to solve your problem

Intercompany STO between 2 Full Warehouses with Handling Unit Activated.

Hi,
I want to perform Intercompany STO between plant A and B both have Full warehouse management activated with HU Mgmt. Will this process be exactly same as the generic process?
- Create PO
- Do VL10g
- Go to VL02n and then create TOs and assign HUs to delivery using LT03
- Do PGI from VL02n
- Perform GR with MIGO
Or what would be done differently in this process?
Also, can I use VLMOVE and use Process 301 to do the same?
Please advise.
- rohit.

No response received.

Intercompany STO with CIN

Similar Messages

Maybe you are looking for