Intercompany STO

Hi
Intercompany STO Process:
I am creating the Delivery for Intero-STO using Tcode: VL10B.
But, when there is no sufficent stock in the shipping plant side, the D.O is not get created. Also there is no any error message shown stating pertinent to delivery failure (or insufficent stock).
Also, I have choosen the C Delivery proposal option in config on below path.. However there is no any delivery proposal is being shown to select...
SPRO --> Material Management --> Purchasing --> Purchase Order --> Set up Stock Transport Order --> Assign Delivery Type and checking Rule : Avilablity Check Rule: C (Delivery proposal) & Checking Rule: B SD Delivery
Can anybody advise how to fix.
Regards
RG

Hi,
It seems you know the reason why a delivery is not created -> lack of stock.
But according your explanation, no logs are shown into V_sa. Related with this,
check if your user role used into VL10b has fields:
"log by request" and "log after delivery creation" with values.
I hope this info helps!
david

Similar Messages

Creation of Sales Order throogh Intercompany STO

Dear SAP Gurus,
I have a question
In the intercompany stock trasnport orders.As per the standard process
i) Creation of STO
ii) Creation of replenishment delievry.
iii) Goods Issue from the supplying plant.
iV) Good receipt at the receiving plant.
Our requirement is to create a sales order through IDOC in place of delivery at the delivering company code.
All the subsequent docuements like delivery and shipment will be based on this newly created sales order.
I want to know primarily that is there anyway of creating a sales order instead of Delievery subsequent to creation of STO.
IF so how can we disable the SAP standrad process ( Std Intercompany STO process) and enable our requirement.
A quick response is highly appreciated.
Regards
Ganesh

Hi,
You can create sales order in the background while creating intercompany purchase order.
By using BAPI BAPI BAPI_SALESORDER_CREATEFROMDAT1.
Ask your technical team to desing.
Regards
Ravi Shankar.

Excise Invoice cancellation in Intercompany STO

Hi,
We are creating the Intercompany STO from Depot to manufacturing plant.
1)Creating the STO. Receiving plant is manufacturing plant
2)Created the GI
3) created the Outbound delivery
4)Created the Outgoing excise invoice J1IJ from Depot.
5) we are receiving the Goods at manufacturing plant with ref to Outbound delivery(materils is received at Quality Inspection first)
6)Created the Excise Invoice "J1iex" Option "Capture excise Invoice" and "Without Purchase order"
Sytem is created the partI and partII entries.
Now we want to cancel the excise Invoice, How to do? we are trying to cancel but unable to do that?
Regards
Sapman man

When you are returning the material, you get a material document.
You create an Excise invoice by using J1IS transaction with reference to the material document.
This excise invoice will come for monthly utilization
regards
prasad

Removal of stock in transit in case of Intercompany STO

Hi Gurus,
Problem : User was not able to set the delivery completion flag in the Intercompany STO because the goods issue qty is greater than that of goods receipt qty at the receiving plant. For that solution is given in the SAP note 167795.
I am yet to implement the note but wanted to know how to clear the stock in transit (after setting the del. completion flag in PO) in case of IC STO, because it is considered as virtual stock in transit.

Hi Sandip,
the stock in transit for CC STOs is virutal as you said. It's always calculated from the GI and GR quantities. The actual formula is EKET-WAMNG - EKET-WEMNG. Until the GR and GI quantities ain't the same, it won't be cleared. You may want to have a look at SAP note 100690, too.
Cheers,
Attila

Intercompany STO - PO not showing in VL10B

Dear all,
In my company I have an intercompany STO between 2 plants A and B.
However, when I try to run transaction VL10B, the PO is now showing.
To solve the problem I tried to remove the dates and shipping point in VL10B without sucess.
I have checked the PO and I have the shipping tab there for all the materials. I have also checked if the PO needs to be released and it's already released.
I also notice that the products that are being ordered do not have sufficient stock to be shipped. Can this be the reason why the PO is not showing in VL10B?
Thanks in advance for your help.
Joã

Dear all,
Thanks for your answers but both of the solutions had been tried before without sucess.
I thank you in advance for any other ideas.
Thanks,
Joã

Intercompany STO return process pricing

Dear Experts,
SALE PROCESS WITH BILLING
1) Intercompany Sale with billing
Company code- 3000
Plant -D001
material qty-10 with price pr00 -1 USD with discount 10 %
raise Purchase order
TO
Company code 1000
Plant A001
process flow= ME21NVL10B-VL02NVF01MIGO--MIRO
RETURN PROCESS
client want the same pricing what they paid from old PO ( ME21N) to get back money
Company code- 3000
Plant -D001
material qty-2 with price pr00 -1 USD with discount 10 %
raise Return Purchase order (with respect to old purchase order) to company code 1000 plat A001
when i am doing my invoice (IG) at company code 1000 how pricing should done
question
1) all pricing element should copy from Purchase order like PB00 , RA01 condition to my invoice (IG)
then how account determination will happen
or
new SD pricing should carried out how????
Please guide
thanks in advance

Hi Hanumant,
In the above scenario you have mentioned, A001 is your supplying plant & D001 is the receiving plant (which is raising the intercompany STO).
So as you mentioned inorder to return the goods, Plant D001 will raise a Return PO with all the conditions as that in its STO & will return the goods to plant A001 using 161 mov. & you can post a credit memo for the return PO.
Incase of A001, you can create a return order (SD) with ref to its billing doc & do a return delivery to take back the goods.
Thanks & Regards,

Intercompany STO Scenario

Hi Friends,
We have the following 2 Stage Intercompany STO scenario from Plant XX01(Co. Code XX99) to Plant XX04 (Co. Code XX05)
1) PO is created with vendor as Plant XX01 and recieving plant as XX04
2) Outbound Delivery is created
3) PGI Done - 643 movement type
4) BIlling Done
5) PGR done in the receiving plant - movement type 101 through MIGO
6) Invoice Verification through MIRO
Now we have to suggest the possible ways to reverse this goods movement and move goods back from Plant XX04 to Plant XX01.
One possible way which came to my mind instantly is to create another Intercompany STO scenario where goods would move back to the first plant.
Another way could be to create a returns delivery.
Request for your valuable inputs and suggestion for handling this requirement.
Thanks & Regards
Edited by: Csaba Szommer on Dec 24, 2011 10:09 PM
Edited by: Csaba Szommer on Dec 24, 2011 10:57 PM

Hi Friends,
We have the following 2 Stage Intercompany STO scenario from Plant XX01(Co. Code XX99) to Plant XX04 (Co. Code XX05)
1) PO is created with vendor as Plant XX01 and recieving plant as XX04
2) Outbound Delivery is created
3) PGI Done - 643 movement type
4) BIlling Done
5) PGR done in the receiving plant - movement type 101 through MIGO
6) Invoice Verification through MIRO
Now we have to suggest the possible ways to reverse this goods movement and move goods back from Plant XX04 to Plant XX01.
One possible way which came to my mind instantly is to create another Intercompany STO scenario where goods would move back to the first plant.
Another way could be to create a returns delivery.
Request for your valuable inputs and suggestion for handling this requirement.
Thanks & Regards
Edited by: Csaba Szommer on Dec 24, 2011 10:09 PM
Edited by: Csaba Szommer on Dec 24, 2011 10:57 PM

Intercompany STO Process

Hi Experts
I am in to Intercompany STO process with one step Goods issue procedure.
When i tried to post PGI for the NLCC type D.O obtained the below error.
Error Message
Fld selectn for mvmt type 645 / acct 6005100 differs for Business Area (033)
Please advise how to fix.
Regards
RG
Edited by: R G on Jan 10, 2011 4:40 AM

Hi
Field status group is maintined as: G003 Material Consumption accounts
Post Automatically is ticked.
I understand the Business Area field is not maintained (suppress) in the account group of G003.
But, it is in movement type is maintaied as Optional.
However no requirement to use the Business Area in overall.
So, where should i turn off it in relevant to movement. Thus wouldn't cause the discrepancy against the GL.
Rgds
RG
Edited by: R G on Jan 10, 2011 6:49 AM
Edited by: R G on Jan 10, 2011 7:07 AM

Intercompany STO with Delivery & Billing- Return STO

Hi Everyone,
Currently I am doing Intercompany STO with Delivery and Billing, which is working perfetly fine.
We create 1 Purchase order for 1,00000 LB and it will be finish after 6 months ( we provide schedule to supplying plant weekly for next 6 month, how much they have to ship ) Some times we received less quantity from supplying plant lets say weekly they have to sent 100 LB but they sent only 85 LB in last week of month and I have to close the sales.
In this can I use Return STO process ? I dont want to adjust quanity in next shipment because I have to close sales.
Some times at the time of GR we found that they have send 85 qty and sometimes we finished GR and Invoice then we get to know later that qty was less.
Return process
- Create return PO with Returns check in PO (NB)
- Create delivery , Vl10B
- PGI
- Credit memo
is this right process?
Thanks
Shree

Slight change in your return process.
Your Return process.
Return process
- Create return PO with Returns check in PO (NB)
- Create delivery , Vl10B
- PGI
- Credit memo
Correct process :
- Create return PO with Returns check in PO (NB)
-GR with 161 MVT type
- Create delivery , Vl10B
- PGI
- Credit memo
Returns :
Case 1 - At the time of GR
Case 2 - GR and Invoice both done
You can follow same process to the both scenarios as you are creating new PO for returns.

Intercompany STO between 2 Full Warehouses with Handling Unit Activated.

Hi,
I want to perform Intercompany STO between plant A and B both have Full warehouse management activated with HU Mgmt. Will this process be exactly same as the generic process?
- Create PO
- Do VL10g
- Go to VL02n and then create TOs and assign HUs to delivery using LT03
- Do PGI from VL02n
- Perform GR with MIGO
Or what would be done differently in this process?
Also, can I use VLMOVE and use Process 301 to do the same?
Please advise.
- rohit.

No response received.

Intercompany STO with inbound delivery with freight....Urgent

Hi,
I have following scenario to map.
There are 2 company codes A & B and a shipment of goods is to be transferred from A to B.
I wish to use Intercompany STO process with UB.
However, A & B are geographycally separated so there involves transportation costs which will be beared by B.
How can I have the pricing procedure if I wish to have one in STO ?
If I create some freight conditions then I can add the values but I will not able to know the exact freight charges till B receives the shipment and the invoice for the same.
In this case how can I use pricing procedure ?
If I do not enter any freight charges in PO then how can I add them before I do the GR in B as this is requirement to add freight costs on material at the time of goods receipt so to arrive at exact landed cost for that material in B.
Once I wish to transfer the goods from A to B, I will do delivery so that stock gets reduced from A otherwise if I wait till the stock is physically transferred to B and then B changing the PO and add freight and subsequently doing picking, PGI and GR ,it will not correctly reflect stock positions in A.
What is the better way I can map this process.
If I wish to use inbound delivery before receiving the goods in B can I add conditions in Inbound delivery ? If so how it can be done ?
So my intended procedure will look as
Intercompany STO-UB
Outbound Delivery
Picking/PGI
Inbound Delivery with freight
GR
Please suggest as this is very critical and important requirement
Thanks in advance
regards,
manOO

Hi,
Thanks for the feedback.I wished to use NB but I don't want to go with the regular NB and subsequent billing cycle.
I want to use UB.
Anyways, is there any way by which I can have freight cnditions added at the time of Delivery.Be it Outbound or Inbound.
Please suggest.
Thanks in advance
Regards,
manOO

Intercompany STO Consignment Return

Hi gurus,
I am giving support to a company with Intercompany consigment process. The process works but I am meeting a problem with the return process . If a click on the flag return item, the shipping tab of the position dissppears so I cannot create the delivery. Please if anyone knows let me know!!
Some details:
Order type NB,
Stock type K
I have customized the:
delivery determination
returns from plant to plant
All master data is correct cause the process is working (only the return are not working)
Thanks in advance!
Mikel

I have never heart of an Intercompany STO Consignment process.
However, you usually create a consignment fillup to get the material to your customer (still owned by you)
when the customer uses this material, you create a consignment issue.
if any unused material shall be returned, then this is not a return, it is called consignment pickup, this process starts as well in SD.
A consignment return would only ocur after a goods issue was done, a return will then return the material into consignment stock at customer location.
About which return are you talking? the pickup or the real return?

Material division in Intercompany STO Invoice

Hi All,
We have Intercompany STO scenario with Billing.However when we create an Invoice with the delivery created for an intercompany Purchase order the division in the line item of the invoice shows 00( cross division) and not the division of the material from the material master.
When we do a billing( with refernce to a delivery) for a regular Sales order the division in the billing document line item shows the corresponding one in the material master.We have different Billing type for Intercompany STO and Sales order.
Kindly let me know if i am missing some configuration or if i can achieve this only using custom exit.
Regards,
Ajay

Hi Ajay,
To get the Item Level Division in the sales order we have to check Item Dbision check box in the Sales document type maintenance.This would result in the division of the Item in a sales order to come from the material. Where as the Inter company STO has no sales order and the division at the header level would be from the Intternal customer which is your recieving plant. And in sales order ,we have a provision to check If the Item Level division and the header level division differs, system will throw an error or warning message based on the configuration we make in VOV8. But in Inter company STO we will be Invoicing the Recieveing plant wchich will be assigned to particualr Inter company billing division, the Billing document will have that particular division. Check to whcih sales area(Interco Billing Div) your plant has been assigned to by going to
SPRO-IMG-MATERIALS MANAGEMENT-PURCHASING-SETUP STO-DEFINE SHIPPING DATA FOR PLANTS.
Kindly please let me know If you need any more Information on this.
Regards
Ram Pedarla

Price in intercompany STO.

Hi All,
We have intercompany STO. The supplying plant is China and recieving Newzealand. We have maintained Vendor for supplying plant with currency USD. But on STO, system takes valuation price for condtiion type (P101) in currency CNY. Document currency is USD, but in line-item Currency is CNY. Is this normal behavior that system takes currency of supplying plant or can this be changed?
Thanks in advance.
Regards
Alexandro

Hi,
Kindly check . is it Inter company or Intra company.
In intra company you can't chane the currency/
If inter company can possible to change the currency . because the company code is different. always the valuation will happen for company code currency.
check .
Accounting entries:
BSX-
GBB(VKA)+
Billing:
Customer +
Other sales deduction -
SAM
Edited by: Saminathan Gopalan on Jun 10, 2010 2:23 PM

Critical intercompany STO issue

Hello Together,
We are facing a strange issue in Intercompany STO process. Supplying plant has done the goods issue ( movt type 643 ) against STO order and sent us the delivery document.
Accordingly we have changed the Import STO Po & manintained the BCD, CVD & other duty in PO. With refect to PO we did the custom MIRO for Intercompany STO PO.
But when i try to do goods receipt against outbond delivery then system ask me to put the MIRO no . When i put the MIRO no then the excise values should be come by defalut but
in my case the excise values are not comming by default.
The defalut excise values are coming by defalut in case of normal import PO ( not STO ) when i try to do the goods receipt against PO & not against outbond delivery.
Why it is so ? Could u please help us.
We are working in SAP 4.7 version and just 2 weeks back we have updated Patch level 35 ( support package SAPKH47035).
Thanks in advance

Hi,
Did you change the PO after doing the PGI and delivery ? If it so try keeping the CVD values before doing the Delivery.
Regards,

Intercompany STO

Similar Messages

Maybe you are looking for