Interest calculation on vendor down payments
With reference to above subject, I have configured all the settings, after that i was executed vendor interest calculation in F.4A, system showing batch in put session created.But it is not showing intrest break up...
after that I had run the batch input session in SM35 with foreground, but i will not generate any accouning document.
Thanks®ards
suresh
hi
In further selections have u checkd the special G/L indicator, and Check whether form has been properly assigned.
Cheers
Muralidhar
To say thanks reward points
Message was edited by:
Murali dhar
Similar Messages
-
Vendor Down Payment Request on WBS (F-47)
Dear Fellows:
I have came across a problem that while creating a Vendor Down Payment request (T.code: F-47) on WBS, my system is not stoping me over budget exhaust. I have Budget of 100 and i create request for 101, system allows it and post the document.
Vice Versa if i create a Vendor Down Payment request over Commitment iten, then system check the budget and generates message.
any good solution to it would highly be appreciable.
Regards.Hi,
The budget availability check is done only against the assigned values and
Following entried does not contribute to the Assigned value
V: Value type not relevant (<> Act./Plan/Stat.Act./Stat.Plan/Commt)
D: Delivery
S: Settlement to object with no budget control
R: Revenue cost element
C: Cost element is exempt cost element
M: Minimum from actual + commitment and plan per order value update
P: Plan value is not on apportioned order / network
B: Plan Costing Single Position
S: Funds Commitment in Balance
So the down payment is not covered for the calculation of the assigned value.
Hence no check is carried out for the Availability check.
hope its useful.
Reward points if useful.
Thanks.. -
Vendor down payment clearing without VAT posting.
Hello SAP Gurus,
I have following issue:
Currently our Vendor down payments produce VAT postings when clearing with final invoice, which is correct.
But we have some old vendor down payments which does not include VAT and needs to be cleared without any impact to VAT postings.
User is using F-44 transaction and can not define any tax code for postings, system calculates it automatically.
It is not possible to make VAT posting happen and then make reversal postings fot VAT accounts as well.I tried to check flag 'Posting without tax allowed' and uncheck 'Post automatically only' in account master data. And then make manual posting using that account via FB01 but system still requires tax code to be entered because Tax category in account master data is set to '<' I'nput Tax Account'. It is impossible to change Tax category let's say to ' * ' because account have balances on it.
Could anyone advice how can I clear these downpayments without VAT posting?
Thank you,I have tried to enter 0% input tax code, but still I'm not able to post document because of error msg:
Tax entry not possible in this item
Message no. FF724
Diagnosis
You can not enter a tax amount in this item since, due to the posting amount entered and the tax code, a total tax amount of zero has been calculated.
This could either be due to the fact that the tax code has been defined with a value of 0%, or because the posting amount entered (that is, the tax base) is too small.
Example:
With a tax rate of 15%, a tax amount greater than zero will only be achieved with a base amount greater than 0.04. With values of 0.03 and less, it is therefore not possible to enter a tax amount.
Procedure
Only enter tax amounts in conjunction with tax codes for which a percentage rate not equal to zero has been defined. Make sure that in documents with several G/L account items you enter the total tax amount in an item with a sufficiently high posting amount. -
Help with F-48 Vendor Down payment for Italy please
Hello,
I have a problem with the F-48 Vendor down payment process. I'm working with an Italian company, and they state that with a Pro-forma invoice, they post the down payment. The Vendor has Withholding tax, and when I use a Vendor that is setup for Withholding in the Vendor master, the Withholding tax is not being applied to the Down payment. They state that they need it to apply to the down payment.
Also, they claim that the VAT tax is not posted at the time of the down payment, but is used to help calculate the Withholding tax. When I create a F-48 down payment and use the 'Calculate Tax' box, the VAT that is calculated is actually posted at the time of the Down payment posting. They claim that it should not post until the Invoice is cleared.
Any ideas?
thanks for your help!Hello Deepa Khatri,
Thanks for your response. I know that the Vendor is setup correctly, because when I create and FB60 Invoice for his same vendor, the Withholding tax is properly applied. When I use the F-48 transaction, the Withholding is not brought in. Is there some Down Payment configuration that might help this Withholding to be applied?
thanks again for your help! -
TDS down payment at teh time of vendor down payment not working
Hi All
Can any one suggest why TDS is not getting deducted at the time of vendor down payment.
TAx type and tax code has been created for payment and GL account assigned for this for paid over. These codes are assigned to company code and vendor master data as well. In vendor masterdata it has been ticked on 'liable' also.
But when making doc with F-48 for vendor down payment, it is not populating for TDS deduction and hence no tds has been deducted.
Can anyone suggest if any more settings is required.
We are in ECC6, and using extended withholding tax for India.
Refgards
MuktaHi Venkat
Actually all the mentioned steps already followed. I removed tax code from vendor master , but it doesn't help.
At the time of invoice posting TDS is working fine, but at the time of advance payment it is not working.It is not populating withholding tax popup at all.
In the tax type below are the settings- (standard SAP settings)
calculation--
base amount- Gross amount
Rounding Rule- Round w/tax amnt up
Cash discount- c/disc pre w/tx
Post w/tax amount -- checked
Accumulation type-
No accumulation - selected
Control data-
W/tax base manual - checked
Manual w/tax amnt- checked
w/tax for pmnts- checked
No cert numbering- checked
Define minimum/max amounts
w/tax code level- selected
withholding tax amount-
w/tax code level- selected
Central Invoice
No cent invoice - selected
Minimum check-
Minimum check at item level- selected
Withholding tax code settings--
Base amount - 100%
Posting ind - 1
with tax rate- 2%
These all are in extended withholding tax settings.
Can you please check why at the time of advance payment it is not asking for any withholding tax.
Regards
Mukta -
Vendor Down payments: VAT
Good Day,
When I post a vendor down payment with T-Code F-47. I post an amount and tick the calculate tax box but when I simulate the transaction no VAT(tax) was calculated.
What should I change in customising so that I can calculate tax on my document amount.
Regards
RopetraGood Day
All the basic tax config has completed.
I have checked whether the customising has been mantained on the posting keys document type and the field status but no luck.
Please advise which cofig settings need to be applied so that i can calculate tax when posting a down payment.
Thanks
Ropetra -
Vendor Down Payment Clearing: F-54 or F-44
Hi
I have made a down payment (with Spl. GL indicator) to a vendor, using F-48. Then I book an invoice using FB60. I kept the two amounts same and ignored WT to keep things simple.
Now i want to clear the down payment against the invoice. I use F-54. The clearing transaction is getting posted. However, the Invoice is lying open (credit entry) along with the Clearing document (debit entry). On the other hand the down payment document (debit) is getting cleared with the Clearing document (credit entry). This means I have two open line items and two cleared line items. I can clear the two open items again using F-44.
I have two questions:
1. What is the use of F-54 here since I have to use F-44 eventually?
2. While doing F-54, Posting Key for the debit line item is 26 : Payment Difference. This is could not understand.
Can anyone please help me out on this?
Thanks in advance
AnindaDear Aninda ,
I will explain you with following example.
Recon account(Vendor)---3000000
Advance to Vendor----
4005000
Exp a/c----
7575100
Bank a/c----
5000100
1. Advance to Vendor (spl gl -A)(F-48)
Vendor a/c (SPL-A)( GL- 4005000) DR 1000
T0 Bank a/c (GL-5000100) 1000
2. Invoice posting
Expenditure a/c ( GL-7575100) Dr 1000
To Vendor Account(GL-3000000) 1000
3. Clear Vendor Down Payment (F-54)
Vendor a/c (GL-3000000) DR 1000 (Posting key-26)
To Vendor a/c (SPL-A)( GL- 4005000) 1000
It means Credited spl GL-A has converted from advance to Normal open item. Amount has been transferred from Advance to Vendor GL to Normal Recon account.By this way Advance account shows Nil Balance with debit(F-48) and Credit (F-54)
The remaining 2 line items i.e., Credit (F-43) and Debit (F-54) shows as open items. In the next step we need to knock off those line items by manual clearing or automatic clearing.
4. Normal Clearing (F-44)
It will be posted without line items.
I hope i am able to help you out to understand process -
Vendor down payment request over PO value
Hi All,
I have a requirement for vendor down payment request amount compare to PO value checking.
I have PO with total value - 600 USD.
When I create down payment request using F-47, I input amount 1000 USD.
The system never show me any message.
I want the SAP to block me from posting down payment request over PO value.
I've read in the forum, to change message type F5373 with error type. But the message never appear in my F-47 screen.
Anyone can help me, what am I missing here ?
Thanks,Hi,
You are right about message F5 373. But this is applicable at the time of the Payment of the Advance i.e. F-48. It is not available at the time of creating the Advance Payment Request against T Code F-47.
If you want to have this control in the Payment Request, then you will have to use the validation, which you can put with the help of your abaper.
Regards,
Amit -
Dear Expert
While doing F-48 Vendor Down Payment am getting below Error
Customer 450822 is not defined in company code 1000
Message no. F5102
Diagnosis
No master record was created in company code "1000" for customer number "450822".
System Response
System error.
Procedure
Maintain the customer master record "450822" in company code "1000" or correct the account number.
Regards
Ajeesh.sHi ,
Instead of typed Vendor number can you please do F4 and then look for vendor in Comapny code 1000 . I know its sound bit strange but I would like to check this .
Can you Please check in OBYR for Special GL indictor A and check the reconciliation account for your Chart of account . It may be posible that you have assigned customer reconciliation instead of vendor -
Vendor down payment request Error
Hi all,
i created a vendor down payment request using f-47. I had created a tax code for the country "AE" using FXTP. But when in the vendor down payment request it is not picking the tax code,giving the error "Tax code AN for country AE has been deleted or incorrectly changed", Message no. FS201
Kindly help me,
Thanks in advance
Ani VargheseHi,
The reason behind this error is that the TAX CODE IS NOT CORRECTLY MAINTAINED.
You might not have maintained the GL Accounts for this. Maintained it in OB40.
Regards,
Amit -
Hi,
is it possible to pay vendor down payment with F-58 (not F-48) after dowing a request by F-47 ?
what is the consequences of that, and what is the procedure that i must follow ?
i hope your help
regards<b>I will explain with one example:</b>
1 You have made a down payment of USD 10000 through F-48.
2 You have received first invoice for USD 3000. First u have to match (clear) against your down payment using F-54. The balance will become now USD 7000.
3 You are again posting another invoice for USD 5000.
4 Carry out the step in 2 and the balance will be now USD 2000.
5 Now you are posting another invoice for USD 5000.
6 After clearing thorugh F-54 u will have a balance amount payable to the vendor will USD 3000.
7 Now you can pay this amount either theorugh automatic payment program or thorugh F-58 to pay this amount. Hope this is clear to you now. -
Hi,
I have 2 queries regarding vendor down payment request F-47
1) Want to create DPR on header level (We have ECC.6 No enhancement package)
2) When I create DPR on item level of more then item value it will stop me & show error but when ever I will create multiple request of same line item with actual amount or less amount (but more then actual amount in total) will be not stop me.
I already active F5 373 message into error.
Thanks,
Farrukh khanHi,
You are getting this error becausea either you have giving more amount than the PO value or GRN and IV has already been created for this item.
You are requested to do create DPR as per below given screen shots
Press Enter
Click on
Hope, this solves your issue.
Regards,
Tejas -
F-48 (post vendor down payment:header data)
Hi Experts,
Good Evening to you,
when i was posting F-48 (post vendor down payment:header data) i was getting an error of No Special G/L acct defined for acct type K sp. G/L ind B recon.acct so at that time i went to OBYR and given in Acct type-K SGL Ind-B in that given Recon account and Special GL Account both the numbers but still the erroring is coming. Later i went to FS00 and checked in Control Data that the GL Account the reconciliation account-vendor is already given but still the error is coming.
So if anybody faced the same error means let me know.
Awaiting for your golden replies & points will be assign for useful answers.
Thanks & Best Regards,
KKHi Rams,
The problem of "No Special G/L acct defined for acct type K ....." has been rectified when i specify the Special GL A/c in OBYR.
Now the issue is i gave a wrong Sp GL account in OBYR and posted a document later i recongnise that i gave wrong SP GL and went back to OBYR and gave the correct SP GL A/c number. So there was a posting has done earlier 1 document so can you tellme how to change from Old Sp GL to New Sp GL.
Awaiting for your golden reply.
thanks & best regards,
KK. -
F-48 & F-47 Vendor Down payment
Hi Experts,
We are in need to add purchase order in vendor down payment requests and in vendor down payment. Purchase order field needs to add as mandatory field.
Please advise how to add PO field as mandatory in vendor down payment requests and in vendor down payment.
Thanks & Regards,
Kuldeep DubeyHi Kuldeep,
There are below three ways out of which you have to take decision which one best suits for you...
1. Make field madatory for Field Status Group in GL Account.
For this you must have FSG assigned to GL which is very unique then only it will serve purpose otherwise PO field will be madatory for all the GL accounts to which this FSG is attached.
2. Make field madatory for the posting key 29.
This will make PO field mandatory for other special Gl transactions also for vendors. For example if you give travel advance to your employee where no PO is required but system will madate you.
3. Set up Validation in GGB0.
This might be the best available option since it can be specific to Transaction Codes only.
Analyse your system and impact of implementing any of the above and take a decision.
Regards,
Chintan Joshi -
Vendor Down Payment in Cash through F-02
Hi All,
When I am entering Vendor Down Payment made in Cash through F-02, it is not passing entry for WHT(TDS). It gives following error "Withholding tax amount exceeds total bank line item amounts"
Pls suggest if there is other alternative wherein I can enter the vendor down payment made in cash with WHT (TDS) entries.Activated the option of "Cash Flow" in Bank Account Master ( T.Code FSS0).
It worked.
Maybe you are looking for
-
I would love some help with this issue. I have configured my SharePoint foundation 2010 site to use Claims Based Auth with Certificate authentication method with ADFS 2.0 I have a test account set up with lab.acme.com to use the ACS. When I log int
-
ICal client with iCal server. Bug with delegation of calendars with plenty
Hi, I have a working setup with an iCal server on OSX 10.5.2 that is also an OD master. I have several users with calendars hosted on the server. Only Mac clients so far. Everything seems to work when managing your own calendars. The problem I see is
-
My iMac will not boot up after a software update. the screen is all whute will show a grey apple in the middle and will look like it is working but nothing happens; this can go on forever. Does anyone have any suggestions?
-
Photoshop 11 Editor will not open. Also I can edit in quick edit, but when I do copy of picture is sent to recycle bin. I am using Windows 7
-
Problem !!= Need help about "police cir" in MLS cisco 7604
hi all , i have MLS cisco 7604 , i tried to use QOS to dedicate cir for specific subnet , but it failed , it seems that bandwidth command dont work on that platform !!! my 1st question eis can i apply QOS and use bandwidth command ??? is it