Interest calculation on vendor open items

Dear Freinds,
I am trying to calculate Interest on open vendor items. t code F.4B
Sys. is given below message, pl advise, i am stuck up.Config has been done , but still the problem remains
No list generated
Message no. 02005
Diagnosis
You may have selected an invalid object or the object contains no further information.
In the case of a database query (reporting), there are no hits to match the specified selection criteria or the other program parameters reduce the data for output to nothing.
Procedure
Depending on the reason for the problem, either choose a valid object or repeat the database query with suitable selection criteria.

Dear Ashok,
thnks, pts assigned, but prob not solved.
if possible pl give the entire steps for me to check & may be 1 scenario
the present scenario is that i have posted vendor invoices in apr'06 , maintained vendor master, vendor not paid so far , running f.4b, selecting all relevnt fields, like calclation dt upto 30/4/06, interest posting dt to be 30/4/06, period -1, print form - printer lp01 etc etc.
Rgs
Vinod

Similar Messages

Interest calculation only for open item for customers

Hi, do you know how to calculate Interest calculation only for open item for customers?I do not want to see cleared items. I have problem with customization.
Best Regards
Tom

In the item interest calculation, you can tick the 'open items' for calculation of interest and also select the 'no cleared items'.
Regards

Interest Calculation on Cleared Open Items

Hi,
I have the following scenario:
We have a receivable to a customer. Posting date of the transaction is June 01, baseline date is also June 01 and due date is on July 15.
Entry is (Exhibit a)
A/R-Customer 1
   A/R-CEWT
At the same time, we have also CM to the customer with July 01 as posting date and July 01 as baseline date.
Entry is (Exhibit 2)
A/R-CEWT
    A/R-Customer 1
In order for the customer not to pay anymore the A/R-, we did automatic clearing for the AR and CM with July 1 as posting date of the clearing.
Entry is
   A/R-Customer 1 (Exhibit 2)
     A/R-Customer 1 (Exhibit 1)
But why is that when i run the interest on July 25, interest was still computed for the AR (Exhibit 1) when there should be none because it was already cleared on July 1, 14 days before it become overdue.
Is it because clearing is also customer?
Thank you

Hi,
We can calculate interest on items cleared with in the calculation period.
When you are calculating interest on open items, system will check open items as on the Calculation Date.
But if you want to calculate Interest on items cleared with in the calculation period., you have to check Calculate Interest on Cleared Items also.
For Instance: If you are calculating Interest on 31st July for the period of 01.07.2009 to 31.07.2009, in this case
some open items are already cleared with in this calculation period, even though you have to calcuate interest for those cleared items for that many days. System will calculate interest for that many days.
Try with this option, still if you need any help please let me know.
Thanks
Chandra

ITEM INTEREST CALCULATION ON VENDOR AND CUSTOMER

Dear all,
how to calculate Item interest calculation on Vendors and customers
what is the configuration need? please let me know it is very needful for me
Thanks in advance.
Regards,
Ram.

in ob46 we maintain int calculation types under that u can maitain int indicatro name int calculation type(P)and save
after that u can prepare itme balance interest calculation(path spro/f/a/ap&ar/business transactions/int calculation/int calculation global settings/prepare item int calculation) here
u can enter int indicator select open itmes check box enter calander type etc.
define referance itn rates obac here u can enter ref int rate long text short text date from currency and save
define time dependent terms ob81 here u can enter int indicator currency effective from sequential number term(u can select item int calculation) ref address rate etc.
enter int values ob83 here u can enter reference int indicator from date and percentage save.
if u have any doubt let me know.

Interest calculation for vendors

Hello gurus,
                 In interest calculation for vendors, In interest on arrears calculation(vendors) t-code (obv9) Here wht we have to configure the steps, like Infirst step i had given,,
Account symbol             Currency                 G/l Account
0002                                  inr                       40009(interest)
Then second step wht i have to give for vendors,, if it is general ledger we will give 2000(g/l a/c paid).
My question is wht we have to give in second step......For Vendors...
Regards,
Assign Points.

Hi,
vendors and customers interest is p type.and it is item interest calculation. The t.code f.2a, f.2b. Try with this.
If helpful assign points,
Rams

Item Interest Calculation for partially cleared items

Hi
We need to do interest calculation on Customer Line Items. The T Code we are using is FINT. We have set an interest indicator for Item Interest Calculation, with Interest Calculation based on Items Cleared with Payments. The requirement is that Interest should be calculated on even partially cleared items. Suppose a customer invoice is generated on 1.1.2009 for INR 100000 and becomes due for payment on 30.1.2009. Now on 10.2.2009, a partial payment is recieved against this invoice for INR 30000. System should calculate interest on INR 30000 for 11 days. Now again on 20.2.2009, remaining payment of INR 70000 is recieved. In such a case, interest should be calculated on INR 70000 for 21 days @ 1.25% PM. In the current configuration, when we define that system should calculate interest on Open Items cleared with payments, system calculates interest on INR 100000 for 1.25% for 21 days. Pls suggest.
Regards
Sanil Bhandari

Hi u can check all below steps with specific fields i thought it is working perfectly check it.
1. Define Interest Calculation Types
here u can enter int rate type as a "S" Balance interest calculation
2. Prepare Account Balance Interest Calculation
here u can enter int calculation frequency means monthly or quarterly etc. calander type G, select balance plu int check box
3. Define Reference Interest Rates
Here u can enter date currency
4. Define Time-Dependent Terms
here u can enter currency effective from date sequential number term (Debit interest: balance interest calc. or Credit interest: balance interest calc.) referance int rate enter before step what u r defined that one u can enter here.
5. Enter Interest Values
here u can enter interest rate for that referance int type
6. Prepare G/L Account Balance Interest Calculation
Here u can enter ur g/l accounts
0001            Interest received (int received a/c)
0002            Interest paid      (int paid a/c)
0011            Pt vl.min.int.earned(int received a/c)
0012            Pst vl.min.int.paid(int paid a/c)
0013            Pst vl.dt.int.earned(int received a/c)
0014            Past val.dt.int.paid(int paid a/c)
0015            Calc.per.int.earned(int received a/c)
0016            Calc.period int.paid(int paid a/c)
1000            G/L account (earned)(Loan giving a/c)
2000            G/L account (paid) (Loan taking a/c)
after that u can post transaction execute ur transaction code i thought it is helpful for u
Regards,
Nauma.

Possible to clear vendor open item against already posted payment document?

Hi
Can you advise if it is possible to clear an open item against already posted payment/clearing doc? Here is the background to the scenario:
An invoice was posted with transaction FB60. This was subsequently picked up in the payment run F110 and cleared by payment document number 200005678. The item went to the bank on the paymnet file and was paid out to the vendor. The transaction reference, which appeared on the incoming bank statemnet was the payment document number 200005678.
Subsequently it was discovered that the original invoice should have been posted with reference to a PO using MIRO. The requirement now is to reverse the paymnet documnet 200005678 in SAP, then reverse the document that was posted using FB60. After this the invoice will be posted using MIRO. This will create an open item on the vendor account.
This item will not be piad out again. Therefore the requirement is to try clear that open item against the previously posted payment document 200005678.
Is there any way to clear this vendor open item against the originally posted payment document 200005678?? Or any other advice on how this scenario can be handled in SAP?
Thank for your help.
Mike

Hi,
I tried that option in our test system. I ran FBRA and entered Paymnet Documnet Number (+Clearing Doc Number), Company Code, Fiscal Year.
Then chose menu option Clearing -> Reset Cleared Items.
The system pops up a window asking for a reversal reason and reversal date. I use 01 and posting date of today.
The system now posts another cleared document. That document places the invoice as an open item on the vendor account. It does not place the Payment Document as an open item on the account.
When I go to F-44 only the open vendor invoice is showing there. There is no open paymnet document.
Is there perhaps some configuration setting that stops the placement of the paymnet document as an open item when reset?
Thanks for your help again.

Vendor Open items Authorisation

Hi Peers!
Is there any report were i can authorise the payments to which vendor and which invoice i can pay today like that.
Ex: Say my higher authority wants to select the open items vendor wise to pay the due. so that i will check that invoices and pay through outgoing payment.
Pls reply soon, Its urgent
Thanks
Murali

Hi
There are so many age wise analysis reports are there for analysing the customers or vendors open items. out of those, F.41 for vendor open items there you can find all the relevant data including business area level also satisfied because in some cases higher management wants the particular business area wise required for analysis. similarly f.21 for customers.
I hope it will be suffice your requirement.
Regads
madhav

F-44 Clear Vendor Open Items

Hi Guru's,
We are trying to manually clear some vendor open items using t-code F-44. For some reason we are not able to find the invoice so that we can clear when we go to F-44. However, if you go to FBL1N and pull the vendor open items as of 7/1/09 you can see the invoice listed there as an open item.
Can someone please help me on this?
Best Regards,
Noopers

Assuming the vendor document is not cleared there could be two reasons why the document is not in F-44
- Wrong company code
- A special G/L indicator - Document is a special GL document and in F-44 selection screen indicator is missing.
Try additional selection -document number.

Vendor Open items

Hi,
I am trying to use "post with clearing" transaction (F-51) and using the "outgoing payments" option there to clear the open items of the vendor. But the system is giving the message as
"No open items found" eventhough the vendor has open invoices. The open invoices are getting diplayed in the FBL1N report as open items but I am not getting the open items list in F-04
Please help me
Thanks,
Krishna Kireeti

Hi Kireeti,
Did u get the solutions for u r issue..
I Got similar issue with Vendor open items..I can see few open items in Report FBl1n and BSIK table.But the same is not picking up in the F-53 manual pmnt.
If u can share u r solution..it would be great help for me..
Thanks in advance..
Rgds
Murali

Vendor open items aging list - Reg.

Hi,
My client is requesting a transaction in SAP which can be used to produce a Vendor open items aging list and the output should be exactly the same as it is for the Customer open items aging List (transaction S_ALR_87012178). Moreover, It is essential for him to have only one line per vendor. He does not want to find a report in the accounts payable side that looks like the one which he mentioned for the accounts receivable side.
Since this is an urgent ticket, can any body help me in this regard.
Thanks,
Prasanna
Moderator: Please, search before posting

Dear expert
Reference from sdn forum
You can customize the vendor report to show the items overdue per vendor by using the following steps
1. Create a form using T Code - FKI4
In this form ( two-axis structure) provide the details for each column as per your Client requirement - Due from 0 - 30 days
etc. You can create a column (using formula method) at the end by adding the previous columns, this will give you total
amount of overdue items for each vendor
2. Create a report using T Code - FKI1
Based on the Form created in the above step. Make additional selections based on client requirements like document type,
company code, account type, currency etc. Execute the report.
The following link will give provides detail steps for the creation of the aforementioned form and report.
Re: AR aging report (summary by customer)
Vendor Aging Report
Regards
Ajeesh.s

Transfer of customer and vendor open items available? (like asset transfer)

Hello,
May I ask you about your opinion.
In SAP we have functionality to transfer assets from burks"A" to bukrs "B".
Do we also have this functionality for customer and vendor open items?
Thank you for your opinion and expertise.
all the best Erwin

Hi,
Please check following links
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90f33e12-aeac-2a10-2186-ed8301f778ba?overridelayout=t…
Cross company-code invoice posting and configuration - ERP Financials - SCN Wiki
Regards,
Tejas

How to clear archived vendor open items in F-44

Hello Experts
My user trying to clear the vendor open items through F-44.once he posted that document and he double clicking the document no, here he is getting error like below
Express document "Update was terminated" received from author "Ravi"
Before that he is trying to display the open item document, here he is getting error like below
System error: Routine Beleg_Nachl info '0100-1100000001-2003-001' Not in
BSEG/archive; inform systems administrator
    Message no. F5333
Diagnosis
    In program routine 'Beleg_Nachle' an error
    ('0100-1100000001-2003-001') has occurred. Processing is terminated.
Procedure
    This is caused by a program error and you should contact SAP Support.
Can anybody please tell me how I can clear those document and also is there any possibility to get back archive data and clear it.
Thanks in advance
Regards
Vamsi

Hello!
Please check if someone has activated the OpenFI/BTE 1650 in your
system.
Within this BTE you can change parts of the internal table where th
data that should get displayed is in.
Please review the BTE, or if after you deactivate it the line item
display works ok.
In other cases this message can be caused due to inconsistencies, for example if ( for some reason ) there are
entries in BKPF, BSID or BSIK or BSIS and nt in BSEG. Please run the reports below to check inconsistencies:
1) SAPF190 as per note 86067 if you have only the Classic GL active
or
2)TFC_COMPARE_VZ (tcode: FAGLF03) if they are using the NewGL.
Regards,
REnan

F-53 manual clearing vendor Open Items

Please help me,
When i saw vendor open items in fbl1n sys gives open items, i will try to clear that open items (F_53) sys gives message there is no open items,
Regards,
TML

Hi Swati,
The openitems which is showing in vendor account might be the spl gl transactions like advance payment, which are not cleared so far, go to F-44 and clear that spl items.
hope it helps you,
Regards,
kishore

Reports to display vendor open items by payment methods

Hi Gurus,
Is there any reports to display vendor open items by payment methods?
Thanks i

Hi,
Use FBl1N or F.41
Goto Dynamic selections, Select payment method give that and execute. It will give you the report payment methd wise.
Regards,
Radhika.

Interest calculation on vendor open items

Similar Messages

Maybe you are looking for