Interest Calculation - Transaction ABUMN

Hello,
This is a follow up to my 'Convert a Fixed Asset to a Leased Asset' post from last month.
We have been testing the transaction ABUMN, in our Production Copy environment. We have noticed that the Interest figures being calculated are incorrect and do not match the Interest values if AS01 is used instead.
Could anyone clarify how Interest is calculated when ABUMN is used, i.e. should it work the same as transaction AS01?
Regards,
Damien.

HI Damien Kelly
i have the same scanrio ( assets sale to bank & Lease back ). I read your all post.
should we first retire the assets , then sales , then create new assets in leased assets class. or
after booking sales of assets , by using ABUMN we should directly transfer assets class without retirement.
it would be a great help if you send me some A to Z steps (Only).
thanks
Thomas

Similar Messages

G/L account interest calculation

Hello Experts,
I have an issue with F.52 interest calculation; we have calculating interest for the period 01.07.2011 to 31.07.2011. However, calculation went fine for all G/L account except two G/L account which has calculating interest for earlier periods also.
We analyze the issue and found out a one possibility, because of field u201CDate of Last Interest Runu201D however this field applies only when there is posting to G/L account with earlier date for which interest already been calculated. I have seen the documents which were wrongly picked in the interest run, and entry date is in earlier monthly only.
I do not understand why these two G/L accounts is picking the documents in the earlier periods to calculate the interest for the period 01.07.2011 to 31.07.2011.
Thanks in advance.
Regards,
MM

Hello Mauri,
Thank you very much for your reply.
First of all we are not using the G/L updation through this program.
I have an issue with only for the period 01.07.2011 and 31.07.2011 for two G/L account, and calculation is asolutely fine for all the earlier periods and even for next period 01.08.2011 ot 31.08.2011.
As per my understanding u201CDate of Last Interest Runu201D, applies only when there is posting to the G/L account with earlier date for which interest already been calculated.
If I keep the Date of Last Interest Run field blank, it calculate interest only for the period 01.01.2011 to 31.07.2011, however I can.t propose this solution because in all earlier periods they executed F.52 transaction with similar input parameter and calculation is absolutely fine.
Please let me know your view.
Regards,
MM

Customer Interest Calculation - Customer Receipt

Hi All,
We have implemented Item Interest Charges for Customer w.e.f Feb 12
We executed the Interest Run for Jan.12(our first cycle). and the system has posted Interest document for all relevant customer with applicable interest rates in Jan12.
In Feb12, we received a receipt from a customer for (whom we executed the Interest run) specific to a sales invoice.
When we tried to clear off the sales invoice the system does not allows to process customer receipt because interest amount has not been paid by customer.
Accounting department don't want to process Partial/Residual payment for the above transaction.
Now our management requires that we must have an option to set off the interests charges separately and the interest charge must not be included with sales invoice on customer receipt.
Lets take an example (for one customer with same currency)
Sales Invoice 1. 10000EUR
Sales Invoice 2. 5000EUR
Sales Invoice 3. 15000 EUR
Total Open item 30000 EUR
Interest Calculated for the above invoices (line item) Doc No Interest .1
Interest Amt : 100 EUR (Sales Invoice 1)
Interest Amt : 50 EUR (Sales Invoice 2)
Interest Amt : 150 EUR(Sales Invoice 3)
Overall Balance end of Jan12 (after Interest Run) : 30300 EUR.
We received a payment for Sales Invoice.1for 10000 EUR on 5 Feb 12(customer has not paid the interest amt for sales invoice.1)
When we process customer receipt (F-28 or F-30), the system is showing an details as Gross : 10000, Partially Paid Amt 100- and when we select the specific invoice the system displays an overall 10100 EUR.
Now our Question is that, is it possible to clear individual sales Invoice (with its original value) and Interest charge separately.
i.e as per the above case 10000 EUR separately & 100 EUR separately or entire interest amount (300EUR) separately, two different customer receipts.
As customer state that he will pay the Internet amount separately (as we have generated the Invoice for interest charges) might be complete 300 EUR in single payment or partial.
Can you provide any lead/workaround to overcome this scenario.
We are in ECC 6.2.
Do revert
Regards,

Found the solution. Just remove the tick from Include Invoice ref.in editing option.

Interest Calculation for special GL items

Hi Experts,
We have posted some special GL indicator documents for the vendors, but in the interest calculation, that is not coming up.
However the system is picking up all the others debit and credit items for that vendor.
So what could be going wrong for this vendor?
Thanks in Advance,
Jeenat

Hi,
Check the transaction code OBAB and assign your special GL transaction to your Interest Indicator.
This should solve your issue.
However this setting applies only for account balance interest calculation.
Regards,
Gaurav

FINT interest calculation on cust overdue items from net due date required

Hi.
I am running FINT option i am running interest calculation from net due date onwards whereas the system is calculating the interest from Next date of due date.
For example: Customer invoice is raised on 01.01.2011 and Net due date is 01.01.2011. I gave the option in the interest calculation - SPRO - FINANCIAL ACCOUNTING(NEW) - ACCOUNTS RECEIVABLE AND ACCOUNTS PAYABLE - BUSINESS TRANSACTIONS - INTEREST CALCULATION - PREPARE ITEM INTEREST CALCULATION, Ref date as as 1 - Value date (Baseline date from Net Payment).
Still the system is calculating the interest from 02.01.2011 instead of from 01.01.2011.
Can anyone help me in this regard.
Regards,
Padmavathi

Hi,
We can calculate interest on items cleared with in the calculation period.
When you are calculating interest on open items, system will check open items as on the Calculation Date.
But if you want to calculate Interest on items cleared with in the calculation period., you have to check Calculate Interest on Cleared Items also.
For Instance: If you are calculating Interest on 31st July for the period of 01.07.2009 to 31.07.2009, in this case
some open items are already cleared with in this calculation period, even though you have to calcuate interest for those cleared items for that many days. System will calculate interest for that many days.
Try with this option, still if you need any help please let me know.
Thanks
Chandra

Interest calculation on security deposit H

Hi,
I have configured the special GL Indicator H and i received the amount against the Indicator H against the Customer. Now i want to calculate the Interest on Security deposit.
1. it possible to calculate the interest on SD?
2. Same customer is applicable for open item interest.
If i am getting any answer it would be greatful for me.
Please i am waiting for your reply Eagerly.
Thanks
Sriram.

Dear Sriram,
It is possible:-
1.You have to create Interest Calculation Type for Customer SD Int Calculation say (R1)
2.Go to OBAA and maintain R1 there.
3.Go to Prepare Sp GL Transaction Interest Calculation (Maintain R1 - D - H - R1
4.In OBAC Maintain R1and select from date
5. Define Time dependant interest terms
6.In OB83 define the rate of interest
7.Go to OBV3 and maintain Account Determination for Int Posting (Select Account Symbol for Posting Key and again Assign GL code to same Account Symbol)
8. Maintain R1 in the Customer master to whom Interest will be payable.
Then Run Interest calculation posting T Code:-f.52
Regards,
Alok

Interest Calculation on Arrears

Hello, I have configured interest calculation for A/R and I am using FINT transaction to run an interest calculation by item. I have 3 problems:
1.- Even I mark "Test run" in transaction FINT, it will do the posting.
2.- Even I select only one item and select the " Process selected item" icon, it processes all items in the run, using FINT
3.- Even the "only debit" flag is selected in the configuration, when i do the run in FINT, it's bringing credits and debits.
Would somebody please tell me how to correct these 3 issues. Thank you!

HI,
Please check the configuration in transaction code OB82, wherein you have 2 different options.
1. Interest on the open items plus items that are cleared from the last interest calculation date till the time you are running the calculation now. The item can be cleared either thru a payment or credit memo or adjustments etc.
2. Similar to option 1, but the cleared items are considered only if the item is cleared against a payment. This will not consider the items cleared thru credit memo etc.
Assign points accordingly.
Thanks,
Madhav Nanduri

FINT interest calculation on open items

Hello,
I am a noob and I hope this is an easy one... At the moment our system is doing interest calculation only on closed items through FINT transaction, but now we need to enable it to do an interest calculation on open items, too. I would kindly require to point me how to do this.
Help is greatly appreciated.
Kind regards,
Andrej Trilavov

Dear Andrej,
You have to change Your interest indicator setting:
IMG (SPRO transaction)
Prepare Interest on Arrears Calculation
AND
Prepare Item Interest Calculation
change the item selection frame settings.
I hope this helps.
mauri

Interest calculation on bank cash credit account

Hi All
My requirement is to calculate interest on cash credit account in
bank . The interest is charged as for e.g 10% on any withdrawals above
10000 and 12% on any withdrawals above 15000 . Whre to set this limit ?
How will this cycle be done and will it be posted to GLs by this interest
calculation run or can it be used just for information purpose to cross
check the interest calculated by the bank ?
Please respond .

There are two defined interest calculation types in the SAP
system.
1. Balance interest calculation.
2. Item interest calculation.
System defined variant for balance interest calculation type
is u2018Su2019 and item interest calculation type is u2018Pu2019. Balance
interest type calculation is used for G L Accounts. Item
interest type calculation is used for vendors and customers.
To display all transaction codes:
Go to t.code:SE16
Table name: TSTC
Keep blank maximum number of hits.
Total transaction codes in SAP 70837.
The following steps are involved in interest calculation.
1. Define interest calculation types (OB46)
2. Prepare account balance interest calculation (OBAA)
3. Define reference interest rate (OBAC)
4. Define time dependent terms (OB81)
5. Enter interest values (OB83)
6. Creation of G L Accounts (FS00)
7. Define automatic posting (OBV2)
8. Entry for loan (F-02)
9. Interest calculation run (F.52)

Interest Calculation on Security Deposit & Refund to party

HI, Expert
I have calculate the interest on Security deposit Amount for the period 01.04.2010 to 30.06.2010 & payment the interst on 03.07.2010 & clear the open item but when I run the next period it is again calculate for 3 days ,My cleint requirement is after calculation of interest it is taking 1-7 days for payment the interest to customer/vendor, is it possible in configuration setting
regards
gk

Dear Sriram,
It is possible:-
1.You have to create Interest Calculation Type for Customer SD Int Calculation say (R1)
2.Go to OBAA and maintain R1 there.
3.Go to Prepare Sp GL Transaction Interest Calculation (Maintain R1 - D - H - R1
4.In OBAC Maintain R1and select from date
5. Define Time dependant interest terms
6.In OB83 define the rate of interest
7.Go to OBV3 and maintain Account Determination for Int Posting (Select Account Symbol for Posting Key and again Assign GL code to same Account Symbol)
8. Maintain R1 in the Customer master to whom Interest will be payable.
Then Run Interest calculation posting T Code:-f.52
Regards,
Alok

Interest Calculation on customer balance

Hi
I need to calculate interest on customer overdues (on net balance after deducting advance received from there).
There are three types of interest calculation:
1. Balance interest calculation
2. Item Interest Calculation
3. Arrears Interest
Please let me know which one i need to select for the same.

Hi Deepak,
I will provide you some information about this matter:
Please, notice that the program RFINTITAR (tr. FINT) isn't used for balance interest calculation. It is used for customer overdue item interest calculation. Please check the documentation available for this program. I believe that this is the option that you should use.
In case of Special G/L transactions:
Check IMG- Financial Accounting (New)- Accounts Receivable and Account Payable- Business transactions-
Interest calculation - Prepare special G/L transaction interest calculation.
As described in the documentation of the customizing node, the assigning of new interest indicators according to the special G/L transaction is evaluated by balance interest calculation only.
Please see the documentation:
"In this step, you define an alternative interest indicator for special G/L transactions. The specifications only apply to the account balance interest calculation."
I hope that this answer your inquiry.
Best Regards,
Vanessa Barth.

Interest Calculation in F.2B

Hi,
I am carrying interest calculation through F.2B, I am having one question?
While running the transaction F.2B it is generating a batch so when manually processing the batch we need to give the reference & document header text manually. So is there any way we can give the reference number (XBLNR) & document header text on the selection screen and post the document directly without processing the batch.
Thanks,
Srini

Self resolution

Interest Calculation with Special G/L indicator

Dear Gurus,
I am facing problem while running the transaction FINT for interest calculation.
When am running this transaction without providing sp. G/L indicator it is working fine.
but when giving sp. g/l indicator (A : Advance Payment) in selection screen system is throwing error as follows
Mes No.         Message Text
100     Interest indicator HI is defined in the account
101     Interest will be calculated on cleared items
102     Interest will be calculated on open items
105     Interest has already been calculated on the account to 00.00.0000
Can any body suggest what mistake am doing in configuration.
Regards
Rupesh

Hi
You can use OBV1 - Interest calcualtion account assignment screen for configuring posting keys and accounts.T You need to check the box Special G/L Indcator here in account determination posting specifications detail screen.
Reg,
Shashi Somani
Edited by: SKSomani on Aug 6, 2009 6:21 PM Tcode OBV1

Balance interest calculation on vendors

Hi,
Is it possible to calculate interest on vendor balances?
I did all the settings for interest calculation and assigned the interest indicator to the vendor master. When I run the interest calculation program (Free Selection) a batch input session is generated but ZERO transactions are processed in the session. I made a vendor posting as well as a part payment. I want to calculated interest on the open items.
Please advise.
Thanks in advance
Raj

Dear Raj,
are You asking if it is possible to calculate the interest on items (on arrears) on vendors?
The answer is yes.
You should use the report RFINTITAP. There is an old one RFKUZI00 but please use the new one; You can use the transaction FINTAP as well.
There are a lot of steps to do: create an interest indicator linked to P (interest calc. type) --> ITEM INTEREST CALCULATION, then You to define the item selection by IMG -->
Prepare Interest on Arrears Calculation
Prepare Item Interest Calculation
and then customize the following steps:
Define Time-Based Terms
Interest on Arrears Calculation (Vendors)
Then insert the relevant interest indicator into the vendor master data.
I hope this can help.
Mauri

FPINTM1 - Interest calculation on different types of items

We need to separate or differentiate the interest and posting them using 3 differerent subtransactions as they need to be identified separately. This is because the nature of the items the interest is calculated on are different. So far the system is using the internal transaction of 0040 (Main trans) and 0030 (subtransaction) and we have mapped it to an external transaction. But this appears to be the only option available currently. Is there a way to get the system to differentiate the interest into 3 different subtransactions depending on the nature of the item? Will using different interest key at item level help? Thanks.

I had a look at the table V_TFKIVV where the internal transactions are stored. So far only the single main transaction 0040 and subtrans 0030 is used for interest calculation in FPI1 and FPINTM1. We need to pay 3 types of interest and indentify them separately depending on the types of items (they have 3 different subtransactions) the interest in calculated on. So far our tests shows that interest on using FPINTM is consolidated under the main trans 0040 and subtrans 0030. Is it possible to split the interest up into 3 the different types or subtrans?
Eg, we have 3 types of receipts where we have to pay interest on, they are employer contribution, employee contribution and adhoc contribution. We need to calculate interest on these 3 types of contributions. Trans FPINTM1 consolidates interest for these 3 types into main trans 0040 and sub trans 0030 ie, only one type of interest and therefore one GL account. Is it possible to split the interest into the 3 different types, perhaps into different subtrans to differentiate them? Thanks.

Interest Calculation - Transaction ABUMN

Similar Messages

Maybe you are looking for