Interest doc getting cleared for first due installment instead of the last

We are creating loans using transaction EK25. There is a problem with the clearing of interest documents. In our scenario, we are clearing the last installments whenever there is an overpayment. But the interest document is getting cleared for the first due installment. How can we make sure that interest documents are cleared for the last installments. Any insights or information on this?
Edited by: PraveenGouri on Sep 13, 2011 1:18 PM
Edited by: PraveenGouri on Sep 13, 2011 1:19 PM
Edited by: PraveenGouri on Sep 13, 2011 1:19 PM

Hi,
Is it a possibility that Interest Documents are created with Clearing restriction which is removed only when next installment is created. This way, your interest document won't get cleared until next installment is created.
Ravi

Similar Messages

The control click and external mouse right click no longer works when copying and pasting album art within itunes. Ex. Hit get info for one song to paste to the rest, copying the artwork wont work when it used to.

The control click and external mouse right click no longer works when copying and pasting album art within itunes. Ex. Hit get info for one song to paste to the rest, copying the artwork wont work when it used to.

Hello there, Teworsham90.
The following Knowledge Base article reviews the process of adding artwork to content in your iTunes Library:
iTunes: How to add artwork to songs and videos in your library
http://support.apple.com/kb/HT1409
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

Who do i get lion for free, when i bought it the 17/6

Who do i get lion for free, when i bought it the 17/6?

If you are in the US go here:
http://www.apple.com/macosx/uptodate/
It could be in your country's Apple website like this (Canada - ca):
http://www.apple.com/ca/macosx/uptodate/
If its not there then try the regional apple website like:
http://www.apple.com/asia/macosx/uptodate/
Country chooser page:
http://www.apple.com/choose-your-country/

How do I get pc pictures before I installed Icloud into the cloud ?

how do I get pc pictures before I installed Icloud into the cloud ?

You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option which is revealed in the iTunes app on your iOS device by tapping the more button at the bottom of the screen.
You can re-download content purchased from the app store using the purchased option which is revealed by tapping the updates option at the bottom of the screen of the App store app on your iOS device.

HT4623 This is the message I get when u try and install it. The update was made available at around 11 a.m today Wednesday September 18th I am on a wifi network and i took the time (about 20 or so minutes) to install, it seemed like everything was install

This is the message I get when u try and install it. The update was made available at around 11 a.m today Wednesday September 18th I am on a wifi network and i took the time (about 20 or so minutes) to install, it seemed like everything was installing but after the long installation wait it wouldn't allow me to download it

I had better success doing this:
Download iTunes 11.1. Connect your device to your computer and open iTunes. Select your device under the Devices heading in the iTunes' sidebar. Click on the Summary tab in iTunes' main window. Click on the Update button.

How can I get iTunes to open to Library instead of the iTunes Store. It does it on one of my computers.

How can I get iTunes to open to Library instead of the iTunes Store. It does it on one of my computers, but I don't know how I did it.

For me, iTunes always opens to whatever I had selected previously when it was closed.
In other words, if I had Apps selected when I closed iTunes, the next time I opened iTunes it would be on Apps.

I have just downloaded an alternative keyboard (Fast Keyboard)How do I get my Ipad2 to use it instead of the default keyboard, please?

I have just downloaded an alternative keyboard (Fast Keyboard).
How do I get my Ipad2 to use it instead of the default keyboard, please?
Thanks for your help

First, please don't shout.
Second, don't post personal information.
Third, restore, if iTunes will let you. Everything except the password will be restored. Connect via cable to the computer that you use for sync. Be forewarned that it takes a long time. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

Form Settings getting cleared for system form

Hi All,
I have added the code for setting editable=false for the following items in Updatemode and Ok mode.Then in add mode,i made the columns to editable = true .First time it is working fine.
the next time, I got the error message as "item is not a user defined item" on ItemCodeCol.editable = true.Then i check the form settings, the Active field for the itemcode cleared.When i set to Active as checked and run my code,it is working fine.How to solve the issue and how to avoid the setting of the fields.
This is my code :
If oSalesQuotationForm.Mode = SAPbouiCOM.BoFormMode.fm_ADD_MODE Then
                oSQItemCodeCol.Editable = True
                oSQItemNameCol.Editable = True
                oSQQtyCol.Editable = True
                oSQWhsCodeCol.Editable = True
            ElseIf oSalesQuotationForm.Mode = SAPbouiCOM.BoFormMode.fm_UPDATE_MODE Or      oSalesQuotationForm.Mode = SAPbouiCOM.BoFormMode.fm_OK_MODE Then
                oSQItemCodeCol.Editable = False
                oSQItemNameCol.Editable = False
                oSQQtyCol.Editable = False
                oSQWhsCodeCol.Editable = False
            End If
Thanx in advance
Regards
Mohana
Edited by: Mohana Annadurai on Feb 20, 2009 5:28 AM

Hi,
This is not UDF in system form.That is , the itemcode,itemname,qty,warehouse field in the content tab of the sales quotation form.when i change the field to editable and noneditable,
1)it is allowing to set the editable property to false and true for the first time.
2) After adding the record,i navigate the record to check ,at that time,as per my code,in update mode,it is not allowing to edit.
3)When i click add menu,and i chose customer, at that time it is not allowing to add a itemcode,becoz the itemcode field is disabled.
4)when i check in form settings, in Table format, Active gets unchecked for the above fields.
5)I want to avoid this changing of active in form settings.How to to this...
Regards
Mohana

Reservation not getting cleared for subcontracting component

Hi All,
A reservation is existing in table RESB for a component material. This reservation was supposed to get cleared once the GR was done for the PO against which it was issued. When we checked the PO it is deleted and archived now. Even when we click on the component button on the PO, we get message that no components were determined.
Further, in the GR doc only one posting line of 101 movement type is seen, whereas '543' for the component doesn't exist. As the PO is now GRd and IRd, archived and deleted we cannot proceed on this. But the requireemnt now is to get the reservation cleared off for the compoenent fron RESB table (or MD04 list).
Please help.
Thanks,
Amit

Try to delete from table RESB if not a dependent reservation.
If it is dependent u can not delete. Source to be deleted then this will automatically get deleted.

Spine Orientation of single pages is Lost when opening CS2 doc in CS3 for first time.

I have a 304 page, full-color, spiral-bound book that I recently opened to make some changes for a re-print. The pages in the Page Pallet were individual pages; however, they all showed a spine on either the left or right side of the page. At the time, this allowed us to use one master page for either left or right pages, plus several of the Paragraph styles had alignment based on the spine.
I just opened the file in CS3 and then I realized that none of the pages kept their spine orientation as assigned in CS2. It is somewhat of an obscure layout, which I am sure is not often used. But it sure would be time consuming to go back and adjust all of the pages.
I have attached a CS3 document that shows what I wanted my doc to look like after converting.
How can I get this fixed?
Thanks in advance.

What you are showing is a standard facing pages document with a two-page master spread. The only thing different is you've set all the pages not to shuffle and split the spreads apart. I think someone even posted a script to automate that within the last year.
What does the document look like now? Not much we can tell you how to get from A to B if we only know what B looks like.

Pacman issues for first time install

I cant install anything using pacman every time I get the error
error: failed to commit transaction (wrong or NULL argument passed)
errors occurred, no packages were upgraded
I have tried deleting the cache and re syncing it doesn’t work.
Tried the create fastest mirror script which seemed to help then suddenly this.
Not sure what do?
Any help would be great. I will provide any information required. Really want to try arch out but this has pretty much halted proceedings.
Thanks

Also i put my proxy details into wgetrc and then changed my pacman.conf to use XferCommand wget
I can see that the proxy is giving a [302 Moved Temporarily] for a few of the db's
The proxy is blocking some of the sites. Im going to change mirrors and see what it says then.
EDIT: Update i did the change of mirro and its downloading but now im back to my orginal problem of
Operation too slow Less than 1024 bytes/sec transferred the last 10 seconds
The base.db finishes fine but the rest will not download successfully. It downloads up until a certain point then just stops. The extra.db reaches 63% and community.db reaches 73% but they both get stuck there and give the error
Any thoughts?
Last edited by will_123 (2013-03-19 13:40:53)

Printing to a Windows shared printer, keep getting "Hold for Authentication" when I'm on the Windows shared network and can browse the computers.

I have had two MacBook Pros now, and this has been an issue in Mountain Lion and Mavericks. I've got a shared printer on the local Windows network (it's a USB printer shared via the network and the computer), and the other Windows computers in the house can print to it no problem. The Mac sees it no problem, yet whenever I try to print to it, I just get "Hold for Authentication."
Like I said, persists over Mountain Lion and Mavericks. No other computer in the house has any issues printing to it. I've installed the drivers for the printer as well (Brother HL-2240).
I've tried to follow the instructions here: https://discussions.apple.com/message/23268762#23268762 but the printer isn't listed in Keychain Access.
Any thoughts?
Thanks in advance!
Patrick Campanale

Well, that isn't too useful. Try this instead: Adding a printer shared by a Windows computer via SMB/CIFS.
You may find more by selecting Mac Help from the Finder's Help menu and searching for articles by keyword.

I can't get uupdates for Photo Shop Elements 9. The answer is "not available now, try again later". Very frustrating.

Why can't I get updates for Photo Shop Elements 9? All I get is "not available now, try again later". Very frustrating.

Which operating system are you using?
You can download and install the updates from here:
mac
Adobe - Photoshop Elements : For Macintosh
windows
Adobe - Photoshop Elements : For Windows

Available Space in 'Get Info' for HDD does not match with the files

I have a 75G HDD on this Macbook. The 'Get Info' for the HDD says I only have 1G of space available. However, when I go item by item in the HDD, and total the sizes myself, it only totals to 30G of space being used.
Anyone heard of this problem before? Are there files hiding somewhere? How can I get more useful space on this HDD?

Hi and welcome to Discussions,
use something like Disk Inventory; JDisk Report or OmniDisk Sweeper to really find out what is consuming your disk space.
http://www.macupdate.com/info.php/id/20598/jdiskreport
http://www.macupdate.com/info.php/id/14393/disk-inventory-x
http://www.macupdate.com/info.php/id/7402/omnidisksweeper
OSX hides quite a lot of system files from the user for the sake of safety.
What to delete and what not is your choice.
Regards
Stefan

Getting input for atleast one variable present in the report

Hi All,
I want to create a report with the below requirement.
If user didn't enter the value for any of the customer exit varaibles(ZCALDAY, ZCALMNTH and ZCALYEAR), then it should not allow user to generate the report. It should give a message or popup and return to the selection screen for getting the value for the input variable. Basically, it should get input for atleast one variable.
Please help me in this issue.
Regards,
Yokesh Kumar.

Hi All,
I have written the below code for my requirement.
when 'zcalday' or 'zcalmnth' or 'zcalyear'.
      DATA: LOC_VAR_RANGE LIKE RRRANGEEXIT,
                  count type i.
      IF I_STEP = 3.
        count = 0.
        LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = 'zcalday' or VNAM = 'zcalmnth' or VNAM = 'zcalyear'.
          IF LOC_VAR_RANGE-LOW is initial.
            count = count + 1.
          ENDIF.
        ENDLOOP.
        if count EQ 3.
          CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
            EXPORTING
            I_CLASS = 'RSBBS'
            I_TYPE = 'I'
            I_NUMBER = '000'
            I_MSGV1 = 'Please give inout for atleast one varialbe''.
            RAISE no_replacement.
         endif.
      ENDIF.
Is there any fault in the below code? Please let me know if there is anything to correct...
Regards,
Yokesh Kumar.

Interest doc getting cleared for first due installment instead of the last

Similar Messages

Maybe you are looking for