Interest posting at the time of dunning run

Hello Fi experts,
In the dunning process, we can define that interest is to be calculated or not by making the desired setiings at dunning procedure as well as at the dunning level. I have a small query in that. Is interest posted also at the time of dunning run or its just calculated, and posted on at later stage? Please help.
Regards,
Van

Hi,
In Post Dunning Run, you can see the interest amount on the print form, but There will not be an FI Entry for the same. if you want to have Interest calculations posted to FI , for this You need to Maintain a Separate config settings and also the GL Account ,should be activated with Interest Calculation indicator i.e in GL Master. you can do the required Config Settings at SPRO -Financial Accounting (New)-Accounts Receivable and Accounts Payable-Business Transactions-Interest Calculation-Prepare Interest on Arrears Calculation-Excute go to New entries or Click on the Indicator for which you want to maintain and give the details as per the requirment.
also check the other settings in the same path for furdhur requirments.
Hope the above clarifies your Doupts.
Thanks
Goutam

Similar Messages

House Bank selection at the time of Payment run

Hello All,
At the time of automatic payment program, The user has to select the house bank for the payment irrespective of ranking order maintained in the FBZP. And I dont want to give the house bank in all the line item at the time of posting or reallocate at the time of payment run.
Is there any option to maintain the house bank in a single place before the payment run, so that for that particular payment run picks the house bank.
Hope the question is clear.
Raja.A

Hi,
the user should use the "available amounts" in bank selection and put zero in the bank he doesn't want to use, and put an amount in the bank he wants tu use.
The available amounts may be changed from the F110 transaction, environment menu, maintain config, bank determination.

While running F110 mail trigger should happen at the time of payment Run

Hi Experts,
I have configured FBZP and automatic mail trigger for Payment Advice also. Now while running F110 then at the time of Proposal Run the mail is getting triggered. But since its proposal it can be edited also. So I need the mail should trigger at the time of Payment Run. Plz suggest how to achieve this.
Thanks in Advance,
Arabinda

Check this note: 836169
may be helpful with the config and setup, its a consulting note....

At the time of cost run CK40N, cost relese in previous month.

Hi,
At the time of cost run CK40N, executing today or previous (05.04.2010). But Cost release in previouse month 31.03.2010.
I tried but system not allowing and saving the varient in previous period(31.03.2010).
Please provide solution and little biturgent.If any clarifiaction ask i will explain in detail.

Hi Sreekanth,
We also faced the same issue with CK40N costing in previous month. What happened is that during testing in quality the new month started and the system is not allowing back date release. So we have to now open and close periods in MMPV and OB52 which is not possible because MM postings are pending. So the new costing release has to be carried after opening and closing of periods.
Syed Abid Hussain
Edited by: sabidh on Apr 5, 2010 2:45 PM

How do I get the Time Capsule to run both 5GHz and 2.4GHz networks at the same time.

How do I get the Time Capsule to run both 5GHz and 2.4GHz networks at the same time.

Thanks for digging out the facts.
You have a 1st Generation Time Capsule.
Your model can produce two bands....either 2.4 GHz or 5 GHz....but not both simultaneously.
You would need a Generation 2, 3 or 4 Time Capsule for simultaneous dual band capability.

How to retrive the new reocrds which are posted at the time of loading data

hi experts
i have a doubt
if we are performing a load operation at the time of loading if client posts some new records related to the current load is those records will be transferred to the target with the current load or we have to load them at the time of delta load, what will be the problems occurs at this situation
also we are having an option in RSA3 ---BLOCKED ORDERS is it going to helpful for this situation
also i found some answer like at the time of loading we need to lock the base tables so that the new data will be blocked is it the solution for the above scenario
thanks in advance

Hi Lokesh,
Not clear if you are referring to posting of records during an initialization activity or normal delta, full loads. In case of an initialisation for a LO Cockpit datasource you cannot allow any postings to be done in the source (ECC) system. In case of normal delta, full loads, the changes are stored in tables/extract structures/delta queues and are not affected by the changes in the source system during that time. The changes done during that time are captured in the next delta run.
Hope this helps!
You may want to refer to blogs from Roberto on the extraction methods and their operations.
Regards,
Kunal Gandhi

Accumulated depreciation is not posted at the time of sale of asset with r

hi
all
i have created a asset with acquisition date 1.4.2011. i have posted the acquisition value as 20000 inr.
i have executed the depreciation run in AFAB t.code for april2011, may 2011,.. the depreciation is posted. in august i am retiring the asset with revenue in f-92. at this time the accumulated depreciation is not debited . the system is taking the difference between the acquisition value and sale proceeds to loss on sale of asset directly.
pls suggest me what is to be done
thanx in advance

yes, i have assigned the GL account for the accumulated depreciation on the asset in AO90. when i execute the depreciation run the system is posting the entry
depreciation a/c dr
to accumulated depreciation on asset a/c
but at the time of retiring the asset it is not debiting the accumulated depreciation on asset a/c.
any how thanx for Ur reply

Error at the time of dep. run

Dear All,
I have assigned the cost centers in the asset master & also create the Dep. GL accounts as a cost element but the problem arise when i run the depreciation.
At the time of running the depreciation run, we are getting the following error, "GL account requires a CO assignment".
The problem is we can't assign one cost center to the cost element because assets are related to different cost centers and depreciation should be posted to different relevant cost centers so we can't assign the cost center in the Depreciation GL cost element.
The requirement is when we run the planned dep., all the dep. related cost should post to relevant asset cost centers.
Even in the OKB9 settings, we can assign only one cost center against that dep.gl cost element.
Kindly do the needful.
Regards
Anuj

Hi
It is clear that your Org structure is different. You cant post deprciation to various cost centres. Post it to one cost centre and then go for assement/distribution. Alternatively you can use TCode KB11N for manual reposting from one cost centre to another.
Cheers
Srinivas

COGS Posting at the time of Invoicing

Hello Experts,
We have a requirement wherein the COGS Posting should happen at the time of Invoicing.
Our requirement is as below.
At the time of Post Goods Issue
Stock in Transit A/c Dr
     Finished Goods A/c   Cr
At the time of Invoicing we are expecting the below 2 entries
COGS A/c                   Dr
      Stock in Transit A/c     Cr
Customer A/c               Dr
          Revenues
We would like to know how to achieve the 2 the above mentioned 2 entries at the time of Invoicing.
Best Regards
Balaji Kancherla

Hi Balaji,
I can give you below direction...
1. Go to OBYC and enter GL Account Goods in Transit for key GBB VAX. So whenever you post PGI, system will post GL Account Goods in Transit.
2. You will have to add two condition typs into your pricing procedure..
ZGDS:Goods in transit (GL Account - Goods in transit)
COGS:Cost of Goods Sold. (GL Accounts COGS)
Importantly, you will have to attach Calculation Routine which will bring the amount posted to Goods in transit at the time of PGI.
Regards,
Chintan Joshi

Price difference posting at the time of IR based on GR

Hi,
I had a PO for 10 pieces @ 10, GR for 10 pieces @10, but i got a invoice from vendor for 10 piece @12.
so what can be the possible entries at the time of IR for Price difference; like, it should be posted to material account / it should post to price difference account. How can we configure the same? is price control indicator do play any roll here?
Please try to give as much as information as you can.
Thanks !

Hi
While posting invoice through MIRO, system takes into acccount either Stock or Price differences. To understand more.....
If the stock is available, then the system transfer that amount to inventory. if the stock is not avaiable system transfers that amount to price differences account.
If the stock is partly available, then system generates 4 line items. while doing invoice in the moving Avg price(V)
GR/IR Account               DR
Inventory acccount        DR (In Case of Price increase due to escalation clause)
Price diff. account          DR (In Case of Price increase due to escalation clause)
          To Vendor account
          To Inventory acccount        DR (In Case of Price decrease due to escalation clause)
          To Price diff. account          DR (In Case of Price decrease due to escalation clause)
In the above entry only one will be applicable regarding diffrences posting either price decrease or price increase.In the case of Oil (HSD)these fluctuations are very common.
Edited by: ANJIREDDYA on May 31, 2010 11:36 AM

AED and SED not getting posted at the time of J1IEX

Hi,
I have an issue related to CIN.
I have created PO with proper tax code and the excise taxes are calculated properly for BED,AED and SED
Then I did MIGO with only Part1 update.
After that I tried to captured the excise invoice by using the transaction code J1IEX- Capture, here all the three taxes are showing correctly, but at the time simulation I can see only BED entry but not other two.
The BED entry which got simulated is ED A/c Dr to Cenvat clg A/c
I have maintained the proper account determination for AED and SED with proper condition types.
Still am I missing any customizing seetings either from FI or From MM
Waiting for valuable reply,
Thanks in Advance
Ravi

hi
check this settings
Logistics - General --> Tax on Goods Movements --> India --> Account Determination
Specify Excise Accounts per Excise Transaction

How to read the time and then run different parts of the codes?

I am new to LabView. I want to read the program running time and then decide what to do.
For exaple, if time is less than 1s, output sin signal;if time is more than 1s, output sawteeth signal. It is easy to be implemented in C or Simulink, but seems difficult for me in LabView.
Thanks.

Hi, Bill,
Thank you very much for your help.
I changed your sample codes a little bit to get moving graph. I have three more questons:
(1) If there are more cases, such as one for t=1s, the second for t=3.2s,and a third for t=6.9s, do I have to use multi-layer case structure, since it only checks the result if it is true or false?
(2)Does labview provide us something to have the function such as 'switch...case' or 'if..else' in C/C++?
(3)Is there anything for a time-based multi-segment function?
Best wishes,
Attachments:
example2.vi ‏55 KB

GR/IR Posting at the time of Service Procurement

Dear SAP Friends,
I am working on the issue of Shipment & Shipment Costing.
In that scenario their is process of Service Procurement for Fright Charges paid to Transport Vendor.
Now in that case while making the Shipment Document system automatically creates the Service Entry Sheet in the Background with respect to Service PO created (Manually) for the same transport vendor.
We have maintained valuation class no.3225 for Freight Services & material group no. 960 for Services.
Also in Logistic Execution -
> Transportation -
> Shipment Cost -
> Shipment Cost Document -
> Shipment Cost Types and Item Categories (T_56). In this we have maintained valuation class 3225 with respect to Item Category/Automatic Proposal(Posting)/Valuation Class - 3225.
Also in OBYC - WRX (GR/IR Clearing) i have maintained Valuation Class - 3225 with required GL - 14820000.
But when we check the accounting entries for Service Entry Sheet systems does not pick the GL account with respect to valuation class maintained in OBYC - WRX. Instead system was picking the G/L account for which Valuation Class not maintained.
Our requirement is we want different G/L account for GI/IR clearing in the Shipment Process. We have also made the configuration for the same.
Thanks in Advance
Points surely awarded.
Regards,
Sandeep

Hi,
It is of the standard functionality of SAP that in case of WRX Transaction/Event Key for Service PO, the blank valuation class will be applied. The valuation class will only be used for this particular transaction/event key WRX in case of material.
Cheers,
HT

Documents not posted at the time of Manual Bank Reconciliation (ff67)

Hi All,
In FF67 below document no. not posted. I tried to post it from FEBAN also.
Vendor payment 1500004860 - Amount 1164.50 USD(261,648.24 LKR)
Vendor Payment 1500005009 -Amount 2346.00 GBP (309,244.32 LKR)
When comes to 'Post with Clearing Process open items' screen gives the error msg "No Batch input data for screen SAPDF05X 3100.
I tried to post it from FEBAN also but due to exchange rate differences its showing error. My all bank accounts are maintained in LKR currency.
In below screenshot i am getting the different amount than which i want to clear.
Please Suggest.
Thanks,
Ashish.

Hi Mukhtar,
Thanks for your reply, but I don't want to post this difference to any account. Shall I achieve this with any interpretation algorithm or with Value date field as in variant for clearing outgoing bank account. So system will pick the reference as value date for clearing of bank payment related transaction in different currency.
Please suggest.
Thanks,
Ashish.

Interest Post from the consumerist regarding breaking your verizon contract for free

http://consumerist.com/2011/06/new-fee-lets-you-break-verizon-contract-without-early-termination-fee.html
I have seen this post and related information about it, can someone (hopefully on the verizon side) share some information.

I'm pretty sure this is a violation of this forum, and will most likely be removed soon.

Interest posting at the time of dunning run

Similar Messages

Maybe you are looking for