Interested in finding out about using LabView in Networking Testing applications.

Networking Testing applications, such as:
- General Ethernet and POS testing
- BERT
- RFC2544 back to back, Frame loss, Throughput
- RFC2285
- IP Multicast
- QoS
- Load Balancing
- Wireless IP
- BGP
- Other Networking testing

LV provides a lot of tools which make VIs remotely communicate and control through net easily,such as VI server ,datasocket,tcp/ip,opc etc.I do not have much experiences in the environment you decribed,but in the internet and general ethernet programming with LV is very easy and interesting.

Similar Messages

How do I find out about disk usage ie how much space I have used

how do I find out about the startup disk, and how much space I have on the computer?

Try http://www.omnigroup.com/products/omnidisksweeper/
Alaln

How do those who don't watch boards find out about firmware updates?

Since 'Software Update' doesn't alert users to firmware updates, I wonder how those that don't monitor these boards and other 'Mac news' sites find out about firmware updates?
Yes, Boot Camp made headline news in many major newspapers and those who wanted to install it found they needed to update the firmware first.
But, had I not read about it elsewhere earlier, I would not have known about the second MBP firmware update (which, apparently, solves some of the 'whine' issues - I've had no whining but I like to keep my firmware, in particular, up to date!).
Just as a note to Apple - you've a database of all who have registered their MPB's (at least those with AppleCare if not those who simply run set-up with new Mac purchases). If firmware updates aren't included in the 'Software Updates' procedure, shooting off an email to those with machines that might be in need of firmware updates may save a world of grief to overworked phone support techs.

Yes, I'm familiar with the support page but my point is that not all (in act, likely very few) are familiar enough with that page to go to "Top Downloads" to find firmware updates.
On page 25 of the MacBook Pro Users Guide, Apple DOES suggest, in the next to the last paragraph, suggest "For support information, user discussion boards, and the latest Apple software downloads, go to www.apple.com/support."
But if a new user is having problems he or she is more likely than not to pick up the phone first - and although there's the 90-day phone support and 3 year phone support for those who purchase AppleCare (which new users may not - particularly if buying from, say, CompUSA or other stores who push 'extended warranties' even with the purchase of products whose manufacturers already provide LIFETIME warranties) Apple has thoughtfully provided automated Software Updates (which Windows switchers understand all too well!) but no automated way to be lead to firmware updates. It's my feeling that if firmware notification were included in SU notifications, or via email, it might reduce the number of phone calls and result in happier computers.
While I enjoy reading all the Mac news on a daily basis, a lot of users don't and there may be an even greater number who don't know the wheat from the chaff (or even know where to find the wheat!).
Some firmware updates are critical, some of minor importance, and some (more and more of late, it seems) just a bit cryptic (for instance, 1.01 says "This firmware update is for (MacBook Pro)/iMac (early 2006) computers with Intel processors only. It now runs on localized systems that use languages that read right to left." and then lists the languages supported - which do not include Hebrew or Arabic, two "languages that read right to left".
The only reason that I brought this up is that there are a number of sites that reported that the firmware update alleviates some of the 'whine' that some MBP users are reporting (and now I am reading of 'hum' issues - forget GarageBand! An hundred MBP's could replace a symphony!). Now is that true or not? Apple doesn't say - some users report yes, some no. And as there are no whine or hum issues on the iMac, I doubt 1.01 would 'solve' any of those problems with that machine (and interesting, too, that the "iMac (early 2006) Firmware Update 1.0.1" isn't in the "Top Downloads" section as is "MacBook Pro (early 2006) Firmware Update 1.0.1": what's up with that? Are there really more MBPs out there than Intel iMacs? Or are MBP owners running Windows in Arabic more than Intel iMac owners? Or just hopeful that the update does, indeed, help with the whine problem.
I keep getting off topic (sort of)...
...my point is that it would be simple to notify, and simpler for (in my opinion), Apple to notify customers of firmware updates.

I am looking to find out about specifications of the components of Hyper-V

Hi,
I am looking to find out about specifications of the components of Hyper-V, is someone able to reach out to me? Some features I am looking to find if Hyper-V covers (and the components that would be used) are:
Automated live migration
Workload balancing
Physical-to-virtual conversion
Plug-in for SCOM
Integrated StorageLink
Distributed Virtual Switch
Use of OpenStack?
Thanks,
Eric

You can check with OpenStack to determine their support.
SCOM support of Hyper-V - check wit the SCOM team.
Automated Live Migration - this could be interpreted multiple ways. However I suspect you are looking for the SCVMM PRO feature.
Workload Balancing and StorageLink and Distributed Virtual Switch are feature / product names from companies other than MSFT - so you must elaborate on the use case.
Not sure what your intent is, but it reads as if there is some feature comparison you are trying to do between apples and oranges.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

How do I find out about apps for my business

How do I find out about potential apps that exist but that I don't know of yet

Hey,
What I would recommend doing is contacting the local Apple Store in your area. All Apple Retail Stores have specialized business teams that hold free workshops on using the iPad for business and have lots of knowledge about business applications/uses. Give your local store a call and ask for the business team!
Hope this helps =)
rizz

How to find out about the SMTP Server

Hi,
I have been trying to configure groupware in the portal - in particular I want to enable the sending of emails through the portal. I already have a how-to-guide that that seems to explain the steps quite well. However, it mentions that I need to know the SMTP Server of the email. Can you tell me how to find out about the SMTP Server? Where do I need to look for the name of it?
Thank you and regards,
Katharina

Hi Katharina,
you need the SMTP server of your company. This means you can't look for it in the portal, but have to ask the responsible person in your company.
Kind regards,
dominik

How to find out the used space and free space in the DB for attachments

Hi,
In CRM 5.2 web UI, we can save a transaction by saving attachments like work documents or text files.
Could someone help me find out the used space, free space, maximum capacity on the CRM DB for these attachments.
Thanks & Best Regards,
Ramesh.

Hi,
check with below table
TNAPR --- Processing programs for output
and NACE Transaction code
NACE -- out types
Regards,
Madhu

How do you find out about new VoD videos

Quick question for FiOS TV users - how do you (personally) find out about new on-demand videos?
Do you rely on the Spotlight email, or the trailers playing in the VoD store-front, or mail inserts etc? Keen to hear what everyone thinks works best!
Thanks,
Rich

Here is one suggestion for you.
http://www22.verizon.com/residential/fiostv/vod/vod.htm
Joe D
Verizon Telecom
Fiber Solution Center
Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.Follow us on Twitter™!

When will Verizon Cell Tower installed in 2013 on Ridge Road in Town of Broome, Schoharie CountyNY be turned on? Where in the Verizon Co. can I find out about this

A cell tower was installed in 2013 on Ridge Road in Town of Broome, Schoharie CountyNY. It appears to be ready to operate. When will it be turned on? Where in the Verizon Co. can I find out about this. I now depend on an unreliable and expensive dish-satellite system for internet access and would like to be able to take advantage of my Verizon WiFi cell to connect. Who and how do I contact Verizon to find out? Many thanks.

Are you sure it isn't turned on? Are you sure it is even a Verizon tower? If it is a Verizon tower, it may not be turned on yet because it has not received approval from your local government. If it is awaiting approval, Verizon has no control about when approval will be granted.

TS2753 Has your debit/credit card been charged for unauthorized APPLE Itunes purchased? How do you find out who used it?

Has your debit/credit card been charged for unauthorized APPLE Itunes purchases? How do you find out who used it?

Max OSX 10.6.8, iTunes 11.1
I had a similar problem: I wanted to synch my playlist to my iphone. I like to have my playlist sorted by genre. But under each genre, albums are not sorted by the track numbers. This is a problem, especially when I am listening to club mixes when the DJ smoothly transitions from 1 track sequentially to the next one. Under the properties of each audio file, the Track Numbers and Disc Numbers are already there.
My perfect solution was to turn On Sorting - Sort Album under View>Show View Options. Then, select all the songs in that album (Shift click, Cmd click, etc) , and Edit multiple item information (Cmd I). You will see Info-Video-Sorting-Options buttons. Click on Sorting. Then, under Sort Album, Enter the name of the album. Then OK.
You should now have the playlist sorted by Genre, then each album individually sorted by track numbers. On your playlist you should see, if you scroll right, the column added called "Sort Album".
Hope this helps.

I have two graphics cards in my PC . after I had to reinstall windows again has been slower pc and stuff not play 4k footage . Can you help me find out about it " Raks " graphics card has stopped working ?

I have two graphics cards in my PC . after I had to reinstall windows again has been slower pc and stuff not play 4k footage . Can you help me find out about it " Raks " graphics card has stopped working ?

I'm not aware of any, not to say that there aren't any issues.
it may have nothing to do with ntpd, there are a lot of things running.
ntpd just happen to make the log entry at the same time as the panic.
I would check to see if there are any updates available for you system.
if this is the first time that this has happened. it may be (pick one):
cosmic rays
sun spots
the trilateral commission
if this happens more frequently and that traces look the same, then
there may be a real problem that needs to be looked into further.

Rm ${datafile}; how to force 10g to find out about it?

Hey;
I have a small oracle 10g test instance with which I'm hoping to become familiar with backup and recovery - my first topic of study.
I have a list of backups both copy and backupset. After getting those, I identified the files in the database:
2 from dba_data_files
3* order by tablespace_name
SQL> /
FILE_NAME FILE_ID STATUS TABLESPACE
/oracle/oradata/oci1/example01.dbf 5 AVAILABLE EXAMPLE
/oracle/oradata/oci1/sysaux01.dbf 3 AVAILABLE SYSAUX
/oracle/oradata/oci1/system01.dbf 1 AVAILABLE SYSTEM
/oracle/oradata/oci1/undotbs01.dbf 2 AVAILABLE UNDOTBS1
/oracle/oradata/oci1/users01.dbf 4 AVAILABLE USERS
then blasted example.dbf;
$ ls -ld /oracle/oradata/oci1/example01.dbf
ls: /oracle/oradata/oci1/example01.dbf: No such file or directory
I was thinking that would start screaming immediately in the alert log... so far, nothing. I then tried a query of the hr schema and that worked. That obviously means the hr schema is in the sga which is curious by itself because I've never queried that table before.
Finally a report from the v$datafile_header is also showing everything is still there:
SQL> select file#, status, error, recover, tablespace_name, name
2 from v$datafile_header;
FILE# STATUS ERROR REC TABLESPACE NAME
1 ONLINE NO SYSTEM /oracle/oradata/oci1/system01.dbf
2 ONLINE NO UNDOTBS1 /oracle/oradata/oci1/undotbs01.dbf
3 ONLINE NO SYSAUX /oracle/oradata/oci1/sysaux01.dbf
4 ONLINE NO USERS /oracle/oradata/oci1/users01.dbf
5 ONLINE NO EXAMPLE /oracle/oradata/oci1/example01.dbf
I also forced a check point with alter system checkpoint and still nothing in the alert log or v$datafile_header query.
How long will it be before oracle does the 'holy crap!' thing and/or how can I force it to find out about the missing datafile?
Thanks for any info..
Doug O'Leary

Actually, if, after removing the file from the O/S, you login to the database w/ a new session, this will give you a new server process (assuming you're not running shared server), and that server process would not be able to open that file. If you now do a select and force a full table scan on a table that has extents in the file that you deleted, your process should catch an error.
-Mark
Edited by: mbobak on Jul 22, 2009 11:30 AM

How to find out about questions

How to find out about a question I submitt with out looking through everything?

If your question is .... you submit a question and then just want to see replies to it? Enable email notifications, and you'll get an email when people respond to your post. Each email includes a link you can click on to go immediately to the thread you started.

Where to go to find out about..........

i need to find out about the Hashtable class or function in java, where an i find this on this site?
thanx in advance

The most recent documentation for all the standard classes is
http://java.sun.com/j2se/1.4/docs/api/index.html
Just pick Hashtable from the list of classes in the lower left. I would suggest downloading all the docs onto your own computer if you plan on doing any major development since you will probably need them to check out functions. You can pick documentation at :
http://java.sun.com/docs/index.html
Hope that helps,
Josh

How do you find out about Kernel panics?

Can anyone please explain to me how does one find out about Kernel panics, where to look etc? Thanks and regards

When the operating system kernel, one of the most basic, foundational levels of the Mac OS X operating sytem, detects some kind of exceptional condition or internal corruption or when the hardware sends it a signal of some grave error, which can be a bug in the system software or a driver or can be a hardware problem and the situation is not one that can be dealt with and continuing operation is impossible, then the kernel "panics." It does it's best to shut down gracefully, but it's an abortive termination of all system activity, after which a reboot usually takes place (though you're notified and must intervene before that happens).
It is a serious error and should not occur, but computer technology, both hardware and software, being what they are, there's no way to absolutely guarantee they won't happen. Unix-based systems such as Mac OS X have pretty good reliability, especially since Apple controls both the hardware and software. Still, 3rd-party software can be incorporated into a system, and Apple does not control or certify that code, so there's ample opportunity for poorly written add-ons (especially hardware drivers) to cause problems.
Randall Schulz

Interested in finding out about using LabView in Networking Testing applications.

Similar Messages

Maybe you are looking for