Interested in taking the ACE exam

Hi there.
I'm interested in taking the After Effects CC Certification Exam.
Adobe website suggests there's only a recertification exam for this version:
Adobe Certification Exams | Adobe Training & Certification
But, Person VUE website clearly shows there IS such a test. I asked them and got this answer:
Dear Ofek
Thank you for contacting Pearson VUE.
Please be advised that the exam 9A0-360 is available for booking in the system.  If you need advise of certification or recertification advise on this exam, you will need to contact adobe directly for advise.  Pearson VUE can only confirm to you that the exam 9A0-360 is available in the system.
Should you have any further queries, please do not hesitate to contact me.
Kind regards
Guillermo OlivaCustomer Service Specialist
Customer Service Centre
Pearson VUE
I'm confused.

I'm just guessing here, but I think the test prep materials are only available for the CS6 and the CC exam. I would study both. If Pearson schedules the test and takes your payment then they have the test or an equivalency test for CC recertification and CS6. That is what makes sense to me.

Similar Messages

  • When will the ACE exam be updated for LR 2.0?

    Just wondering if anyone has heard if / when the ACE exam for Lightroom will be updated to reflect the fact that we're on Version 2.0 of the software (well, 2.2 / 2.3 I guess). It seems to me that the summary page:
    http://partners.adobe.com/public/ace/main.html
    and the prep guide:
    http://partners.adobe.com/public/en/ace/ACE_Exam_Guide_PhotoshopLightroom.pdf
    don't specifically refer to v2.0 and I don't *think* they've been updated recently. I have tried emailing Adobe support about this, but they have only said that "it depends on the higher authority and the web development team who takes decision amongst themselves about the schedule of the exam." I find it hard to believe that the web development team decide what goes into the LR ACE exam! However, I tried to seek clarification and was given the same answer once again.
    I seem to remember reading that when a new version of a program is released, the ACE for the older version is only valid for another X months (possibly 6?), before you have to re-take the exam for the new version to remain ACE-qualified. Obviously I don't want to take the ACE exam for v1.0 (which I don't actually even have any more!) if they suddenly update it next week.

    I have asked someone who should know and will wait for an answer then post back.
    Geoff the Kiwi - Adobe Community Expert-LR

  • Can anyone recommend a resource for the ACE Exam?

    I would like to take the ACE exam for Dreamweaver and want to practice on sample tests. Does anyone have any suggestions for where I may download or purchase sample exams? Also, any other suggestions for helpful resources that can assist with studying? Thank you!

    Zabeth69 wrote:
    http://www.adobe.com/education/instruction/ace/pdf/Web_Comm_CS4_examprep.pdf
    There are sample questions at the end that we found to be actually incorrect.
    I have taken only a brief look at that document, and have just two comments:
    In spite of the URL, that's not the preparation guide for the ACE (Adobe Certified Expert) exam, but the ACA (Adobe Certified Associate) exam. I believe that ACA is intended for use in schools, and is not considered to be a professional qualification. It certifies individuals have the entry-level skills.
    You're right. Both the questions and some of the answers are completely off the wall. Adobe should withdraw that document immediately (and the exam if it bears any relationship to those questions). Sadly, they refused to do so with the Dreamweaver CS3 ACE exam in spite of considerable pressure from Adobe Certified Instructors and Community Experts. The CS3 ACE exam was so bad, Adobe acknowledged a pass in the DW8 exam as sufficient credentials to qualify as a certified instructor.
    The document that I pointed to (http://partners.adobe.com/public/en/ace/ACE_Exam_Guide_DreamweaverCS4.pdf) is the ACE exam preparation guide. Apart from the missing screenshot, the questions and answers appear to be OK, although I would debate the wisdom of the strategy suggested in the question about synchronization.

  • Anyone in Arizona interested in taking the LabView I/II course?

    Hi,
    I plan to take the LabView Bsics I/II course in Phoenix, Arizona, which is
    scheduled for the week of Nov. 26, 2001. They need at least four more people
    to reach minimum enrolment. I was wondering if anyone else is planning to
    take this class. Thanks, and sorry for posting nontechnical stuff.
    Behzad.

    KJV wrote in message news:<[email protected]>...
    > When I run the matlab generated dll, it is stating 'matllb.dll not
    > found'. Is it that I should set the path for matlab\bin to include
    > all the dll's before I compile? When I make dll from C, it works fine
    > in LabVIEW. The problem is from .m to .dll. The problem also arises
    > when I convert my .m to .exe. The same error of 'matllb.dll not
    > found' comes over. Should I change my matlab compiler options or
    > something else? Please help me?
    I have the same question,I don't know how to use the matlab DLL file in labview,
    I hope someone can descripe the procedure in detail.

  • PSCS4 ACE Exam - Questions on 3D and Video included or not?

    Hi,
    I have been thinking of taking the ACE exam for CS4 for awhile now. I have been using a couple of the exam sims available, ExamAids & uCertify but have noticed that while the uC one has questions on 3D, Video and Animation, the EA one does not.
    Can anyone who has actually taken the test please tell me if they had to answer questions on these elements of the software. I'm not interested in what the questions were, just if they covered those subjects. I know they are not listed on the exam bulletin, but they might crop up in the 'Advanced Knowledge' section.
    And before anyone from the 'why bother with ACE exams' crowd chips in, I work for a training company that wants to become AATC, they need to use ACIs to achieve that status. So I need to become an ACE.
    Thanks in advance,
    Kris

    The questions are only comming from the prep guide, if something isn't mentioned there then it won't be in the exam. There's nothing about 3d in the prep guide so you don't need to learn about it but there are two subpoints about video so make sure that you go through those:
    •  Given a scenario, describe the proper color conversion to apply. (Scenarios include: To CMYK for prepress, to a different color space for Web or video.)
    •  Explain how to use features that handle images moving to and from video workflows.(Includes: Pixel aspect ratio, document presets, Video Preview.)

  • Captivate 4 ACE exam

    Does anyone know if the ACE exam is available for Cap4?  I've checked the list according to Adobe's website but am only able to find it for version 3.
    Thanks,
    randy

    Hello,
    I know this thread is quite old, but I came across some comments about Captivate 4 that I think you could get a workaround from if you wanted to.
    In regards to audio quality, I experience the tinny, hollow audio quality you speak of. There is a work around for it. Unfortunately it requires you use Captivate 3.
    Import your audio files into Captviate 3.
    Save the file
    Open the Captivate 4 file you want to put the audio in
    Go to File - Import - External Library (You must be in Edit View)
    Import the CP3 file you created with the audio in it.
    Drag the audio files from the imported library to your Captivate 4 library.
    Problem solved.

  • ACE Exam - Acrobat Pro 09

    I am studying now for the ACE Exam for Adobe Pro 9 and was
    wondering if anyone has taken the test recently and has any good
    pointers for studying? I have the PDF Bible and the Classroom in a
    Book and have been studying but it all is so much to take in. Are
    there any areas that you wish that you had studied for or didn't
    think to study for? I am open to any comment or help. I have until
    May to take the test.
    Was the test harder than you thought or was it common usage
    knowledge?
    HELP PLEASE!!!
    Thanks
    Brenda

    Hi Brenag1219,
    Thank you for your post. Good luck on your ACE test!
    You should know that these forums are specific to the
    Acrobat.com website and its set of hosted services, and do
    not cover the Acrobat family of desktop products.
    Any questions related to the Acrobat family of desktop
    products would be best suited in the Acrobat Forums:
    Link to
    Acrobat Forums
    Thanks!
    Pete

  • What to use to study for the Clad exam?

    Hello to all who may read this.
    I will be going for my CLAD exam in just a few months and I hope that I will pass it and finally attain my certification.
    I have a question for anyone who can answer it. What materials should I consider using to study for this test? I have been to the Basics 1 and 2, with Daq following that. I was a novice using LabView and could write a fairly decent program measuring temperatures and frequency sensors / transducers. However, I transferred to a new lab and haven't been able to even crack the book to maintain my level of knowledge for approximately 1 1/2 years. I haven't ever built a state machine or anything like that. My test will be in about 2 months, and I need a little direction on the study materials. Any help for me cramming all this in my head would be useful and appreciated. Preferably an app engineer or a clad, cld holder advice would be most helpful.
    Please email me with any questions and / or advice you may have.
    [email protected]
    thanx in advance,
    Myke

    To add to one of the previous posts, if you can get a hold of a newer (7.x) version (while there are differences between 7.0 and 7.1 they're not huge) write programs using as many of the main concepts (Loops, cases, etc.,) as possible. It will help you in the CLAD exam, things that are theoretical will also be remembered in the practical part of your brain!. Plus, if and when you are ready to take the CLD exam being _very_ familiar with the environment will really help. The following only applies when you are ready to take the CLD exam:
        As an addition to the previous post, (when you are taking the CLD exam), while you will be tested up to the version previous to the latest release, the test center may have the latest release on the computer you will use. Not much difference between 7.0 and 7.1, environment wise, but if all you have programmed in were the previous to 7.x releases, the environment (look and feel) of the "out of the box" installation is very different. The biggest problem that many have with the CLD exam isn't the difficulty of the problem as much as thinking of a solution and then implementing it within the test time. A good friend, and one of the best LabVIEW programmers I've known, wasn't familiar with the new lay out and didn't know that NI had given switches to make 7.x look like 6.x and the mental context switching and the looking for familiar tools in unfamiliar places cost him the exam (CLD) the first time he took it. The exam(s) are not terribly tough if you are prepared, but they are definitely not trivial either. Which is as it should be for them to have any validity!
    Study hard and good luck.
    P.M.
    Putnam
    Certified LabVIEW Developer
    Senior Test Engineer
    Currently using LV 6.1-LabVIEW 2012, RT8.5
    LabVIEW Champion

  • Anyone at Adobe know when the Flex 2 ACE exam will be retired?

    Now that Flex 3 is out, when will the Flex 2 ACE exam be
    retired? I ask this because I do want to take the Flex 2 ACE exam,
    and I want to ensure it is still offered when I am done studying
    for it. Thanks.

    I found out by the Adobe guy that coordinates certification
    exam development that the Flex 2 exam should still be in service
    for another 4 - 5 months. Not set in stone I guess, but that's what
    he said.

  • Please can some-one tell me where to find the price differences between the ACA and ACE exams.

    Please can someone tell me the price difference (in ZAR) between the ACE and ACA exams.

    Why did you post this in the forum for Adobe Reader?

  • When is Adobe going to start offering ACE exams for its CS5 products?

    I am most interested in getting the CS5 Web Specialist certification (Dreamweaver, Flash Pro, and either Photoshop or Illustrator).  I have asked multiple departments at Adobe over the phone and even called Pearson VUE, the company Adobe outsources its testing to.  Nobody seems to know the answer to this question.  If you're not sure, please let me know who might be able to answer this question, it's actually pretty pressing.  Thank you very much in advance.
    -David

    Jim:
    The link does not look like it is fixed... When I go to the link shown below, I do not see a link for the FULL Adobe Photoshop CS5 Certification Exam.  How do I get to it do get the prep guide, etc?
    http://partners.adobe.com/public/ace/main.html
    Thanks,
    John

  • Premiere Pro CS4 ACE Exam?

    Hi folks
    Apologies if this isn't the right place but I'm wondering if anyone knows if/when a "Premiere Pro CS4 ACE Exam" will be available?
    There only seems to be an exam for Premiere Pro CS3 according to the following:
    http://partners.adobe.com/public/ace/main.html (last item)
    kind regards
    Eamon

    hi everyone
    Just to follow up for those that may be interested...
    It looks like the Adobe Premiere Pro CS4 exam is available from the Adobe section of the Pearson VUE website.
    Exam Code 9A0-097
    http://www.pearsonvue.com/Adobe/exams/
    However at the moment it still isn't appearing on the Adobe "Partners" page, with the usual Exam Guide PDF.
    http://partners.adobe.com/public/ace/main.html
    regards
    Eamon

  • Studying for ACE Exam

    Hello all,
    I can't afford to take classes to prepare for the Adobe
    RoboHelp ACE exam, and my company won't pay for classes either.
    Therefore, what's the best way to study without taking courses?
    Should I buy Siegel's RH 7 book? If I study everything here:
    http://www.adobe.com/support/documentation/en/robohelp/,
    would that help me? I was also thinking of combing the online Help
    for RH 7. Thoughts? Advice? Thanks in advance.

    Hi LaKisha
    The best way IMHO is to simply play with RoboHelp. Be
    familiar with all its nooks and crannies. The Siegel book *MAY*
    help you but it wasn't designed to prepare for the exam. It was
    designed to help a total noob learn RoboHelp enough to be
    productive with it.
    Cheers... Rick

  • InDesign CS5 ACE exam - when is it available to take in London

    Hello,
    I have exhausted all means of finding out when and where the Adobe InDesign CS5 ACE exam will happen in London this year.
    I have called Pearson Vue and they have no idea, they still have InDesign CS4 ACE exam listed.
    I have also called contacts at Adobe and nobody seems to know there either!
    I would like to take this exam before Xmas, is this possible?
    Is there anyone out there who knows?!  there must be somebody out there? ( :
    yours anxiously,
    A

    [[Updates reported when running newest version]] - link
    The cause could be due to your user agent being mixed up as 3.6.12 and 3.6.13 versions. I think downloading 3.6.13 from www.mozilla.com and then uninstall your 3.6.13 and then install the 3.6.13 you downloaded should fix it in this case. Your settings are in a separate place ([[Profiles]]) and not in program folder.
    Mozilla/5.0 (Windows; U; Windows NT 5.1; en-GB; rv:'''1.9.2.12''') Gecko/20101026 Firefox/'''3.6.13''' ( .NET CLR 3.5.30729)

  • When will ACE exam for Captivate 4 be available?

    Has anyone heard anything from Adobe about when the Captivate 4 ACE exam will be available?

    I had heard there would be one, but I am not certain about timing. I'll will try to find out something for you.
    When available, they will be listed here. http://partners.adobe.com/public/ace/main.html
    I will make sure we put an announcement on this Forum when that happens.
    Thanks
    John Daigle
    www.showmethedemo.com

Maybe you are looking for