Interested in working with an experienced LabVIEW Developer?

Look no further! I'm based in Southern California, but I have a global reach. We can use whatever project management (Basecamp) tool that you are comfortable with, or we can use plain email communication if that is your preference. The point is that I value flexibility and will work with your company to satisfy your organization's needs. I prefer small projects that are challenging, and have well defined specifications or requirements. If your requirements are not well defined and you need assistance with that we can work that into the contract.
Please see my LinkedIn resume for further details about my credentials. I thank you in advance for your consideration.
Otman Estrada
Message Edited by Otman on 07-26-2009 03:12 PM
Message Edited by Otman on 07-26-2009 03:18 PM

Sorry, the position has been filled and I should have informed everyone sooner.
--MS

Similar Messages

I am just starting out in graphic design and I wanted to know how to get more involved with either adobe and or graphic design? I am really very interested in working with adobe and graphic design more and becoming more involved with both!!

I am just starting out in graphic design and I wanted to know how to get more involved with either adobe and or graphic design? I am really very interested in working with adobe and graphic design more and becoming more involved with both!!

I have now recently downloaded 10.0.2 which is confusing in itself, as, as far as I can ascertain that is actually version 11, but I'm not even sure about that.
Version 10.0.2 is the newest version and the successor to GarageBand '11 (version 6.0.5).
The '11 is referring to the iLife '11 suit of multimedia application - the older GarageBand was a part of this bundle.
Have a look at Edgar's graphical enhanced manuals, the explain very detailed how things work and why. You can buy them as iBooks from the iBook store or directly from the page:
http://DingDingMusic.com/Manuals/

Interested in work with Weblogic Content Express

Hello, I'm interested in work with Weblogic Content Express and I would like some information (stepts) about how obtain this product because we are working with Weblogic Server, Weblogic Commerce Server and Weblogic Personalization Server and I can't found this tool. Thank for your attention and your help. Carlos

Try this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju...
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Will weblogic 4.5 work with the Sun Java Servlet Development Kit Version 2.1?

          Will weblogic 4.5 work with the Sun Java Servlet Development Kit Version 2.1
          (JSDK 2.1). The reason I want this is we want our application servlets to
          use the new 2.1 redirection mechanism to redirect to JSP files.


WL 4.5 supports JSP 1.0 (and, therefore Servlet 2.1).
          What I want to know is when will it support JSP 1.1 (and, therefore Servlet
          2.2)!
          Regards,
          Murali Krishna Devarakonda
          Cox News <[email protected]> wrote in message
          news:7rk40p$s00$[email protected]..
          >
          > Will weblogic 4.5 work with the Sun Java Servlet Development Kit Version
          2.1
          > (JSDK 2.1). The reason I want this is we want our application servlets to
          > use the new 2.1 redirection mechanism to redirect to JSP files.
          >
          >
          >
          >

Need guidance for working with the available example labview VI

Hello,
I'm working with the pulse signals and the pulse signals will be effected by the motion artifacts.There is similar thread available on labview here Adaptive filtering to cancel out noise from an pulse signal for removing the motion artifacts from pulse signals.so,I am planning to use the vi posted in the thread as LMS block by block(example) with sampling rate of 100Hz and number of samples needed=100 using DAQPad-6015/6016.
But I am confused with the channels of DAQ as the author(who bulit this vi) says the channel0 for signal and channel1 for reference signal as shown in the attached image.
1)If channel1(aio) of DAQ is feeded with the analog input of pulse signals then what is the input needed/feeded to the channle1 of DAQ.
2)Can I directly use the vi by changing the sampling rate of 100hz and number of samples=100 or anything else is needed for this requirement.
Can someone explain me the required input to the channels and settings with the DAQ. thanks.
Attachments:
LMS_example.JPG ‏127 KB

Hello,
can someone explain how the DAQ channels settings are to be done.
thanks.

Anyone worked with activex controls within labview

I am working on an new project and the instrument has an activex/Dcom control. Any ideas on how to work with this in my laview (8) environment?

Sounds like you are having a control which can be embedded.
You can create an empty ActiveX container on the front panel (Container palette). Rightclick it and select "Insert ActiveX Object" and browse for your control. If you did not register it, you will have to switch to "Create Object From File" and browse for the ocx/dll-file.
The rest is standard ActiveX interfacing using property/invoke nodes.
hope this helps,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Working with VISA resources in Labview 6

I am having difficulties programming through VISA in Labview 6.0.2. I have installed MAX 3.2, and have configured my two devices going through USB:
1) an Agilent 82357A USBtoGPIB adapter connected with an Agilent 53131A Universal Counter
2) a USBtoRS422 converter registered as serial COM4 connected with a Rainin Peristaltic pump
I can open communication with both devices from within MAX, and send/receive data with no problem.
When I try to program in Labview 6, I cannot communicate with either VISA device, even though I am using VISA instrument IO vi's with the configured VISA resource name from MAX. I'm not sure what I'm doing wrong.
Is there an incompatability between MAX 3.2 and Labview 6.0.2, or have I configured something wrong?
Thank you for the assistance.

Hello,
I think we can defeat the problem with Device 1 fairly quickly. If you have established that you can communicate with the device in MAX, I think we simply have a small programmatic change to make in LabVIEW. I am interested in having you attempt using the VI I have attached, which allows you to specify the bytes you would like to send in an array, and then simply sends the corresponding the string of ascii characters (the characters corresponding to the values in the array); this way we can be sure to send exactly what we would like. The following link has an ascii table in it, which you can use as a reference when putting the values into the array: (where the first byte specified will be the first character in the string)
http://www.ni.com/pdf/manuals/371253a.pdf
Simply change the VISA resource name to reflect your device and give it a try.
As for Device 2, let's try using the same VI (attached) and write a command which the device is known to understand. A simply query would be approprite, where you can write using the attached VI, and then read using another VI which literally only has a VISA Read function in it (and a resource control or constant connected with your resource specified).
One thing to verify before reposting is whether the devices you have use EOS (end of string) and/or EOI (end or identify) termination of GPIB operations. For EOS, a character is sought by the listener to indicate the end of a transmitted string, such as a linefeed or carriage return (or both). EOI termination is defined by the talker asserting the EOI line when the last byte to be transmitted is sent; the listener knows it has received the last byte of that transmission.
Definitely repost; it is likely that we are only few programmatic changes and perhaps a spec check (for the devices) away from dependable communication
Thank you,
JLS
Best,
JLS
Sixclear
Attachments:
WriteByteArray.vi ‏14 KB

Have you worked with ICCP Protocol and LabVIEW?

I was reading about ICCP for SCADA systems, a network protocol for real-time data managing. Does it exist any tool for LAbVIEW and this protocol? Is it possible to use DataSocket instead?

Andreas you are right. I contact a Trados re-seller and this is what he said finally.
Please find the response from SDL’s technical team on your requests.
I believe I have encountered a query of this nature a few years back. Oracle Corp. apparently developed a product that facilitates the translation of some of their Oracle Forms products, and I believe it was engineered to integrate with or leverage the TMs and/or Termbases of a now legacy version of Trados. The last time this came up, I was unable to get sufficient information about the Oracle application to determine which version of Trados was required, but if they are looking for .mtw file type support, then I believe MultiTerm 5 was the last version to use that extension.
Clearly the Oracle Translation Hub has not been updated to maintain compatibility with our more recent technology, and therefore I suspect that the prospect here is out of luck.
It seems that you could not buy TM server as the last version using .mtw extension is multiterm 5 which is now obsolete. (and Oracle has not maintain compatibility with SDL)
I would suggest to take the following course of actions:
1. Ask Oracle which version of TM they were using to integrate with Oracle Translation Hub. (was it multiterm 5?)
2. To improve your translation process, you could still apply SDL translation technology by purchasing Trados and TM server. Could you check what format you could export the Oracle forms to a file and then translate the document by referring to a centralized TM server?
3. What would be the desire automation?
Do you have any idea which version of TM they were using?

Filter Express VI - How to make it work with single samples? (LabVIEW 8)

Hi there,
I'm trying to update some older code by implementing some sort of FFT. Currently, my program acquires X data points, averages them, and spits out the Mean value into a graph (Signal as a function of wavelength) (Spectrofluorimeter). This is done a number of times with the instrument moving to a different wavelength between each sample scan. I've tried to incorporate the Filter Express VI but it does not seem to be doing what I'd like it to. I have it wired to my Signal Acquisition Express VI with the Filter set to Low-pass 100 Hz with the result being passed through the "Mean" VI and then graphed with the Build XY Graph Express VI.
When I graph the Power Spectrum, I am seeing that the maximum observable frequency is always 1/50th my sampling rate (regardless of my low/high/bandpass settings). For example: my # of samples is set to 100, and my sampling rate is 8000 and I observe a maximum frequency of 160 Hz. If my # of samples is set to 100 and my sampling rate to 6000, the maximum frequency is 120 Hz. If I try the Filter Express VI with very basic wiring and just hook up a battery to it, I see all sorts of frequencies all the way up to my sampling rate divided by 2 (i.e. 8000 -> 4000 Hz) so this seems very strange to me.
I'm not sure what is causing this and perhaps its a limitation of the Filter Express VI and I'm supposed to filter using a different method? I was thinking that perhaps I would need to store all of the dynamic data and then wire it to the Filter Express VI once the entire scan was completed and filter that way but I'm not sure how to save or buffer this dynamic data.
I'm hoping this is a common problem and someone would be so kind as to offer me any suggestions!
Thank you for your help!

I think I should clarify that these aren't necessarily "Single Samples". I take X number of samples at a specific wavelength, filter that, then take X number of samples at a different wavelength, filter that, and the goal is to have a frequency filtered data set at the end.

How can i work with adam 4018M on labview?

Do you have any support directly for adam 4018m ? or how can i communicate them? This is important for me. Can you answer that question?

i have adam 4018m and adam 4025 rs422 to rs 485 converter
Dennis_Knutson

How to work with sound in iphone application developement?

Hi All
I have tried some thing written in the book.I have included AudioTool.framework to my project.But unable to hear the sound.
the code i have used is
NSString *path=[[NSBundle mainBundle] pathForResource:@"crunch" ofType:@"wav"];
SystemSoundID SID;
AudioServicesCreateSystemSoundID((CFURLRef)[NSURL fileURLWithPath:path], &SID);
AudioServicesPlaySystemSound(SID);
the sound file has the name "crunch.wav".

Well as a starter i was just trying this in the mac with iphone simulator 3.1.3 to chek whether its working or not and to understand the keys and concepts of using these things. So I have tried this but not worked. Everything(all the resources and the methods) in this code has been being maintained according to their case in the bundle .

Anyone interested in working on a LabVIEW book with me?

Hello
Several months back I began working on a LabVIEW training manual and
after becoming busy with other things, progress has stalled out. I am about
70 pages into it.
Here is what I have so far.
Chapter 1 - Introduction (could probably use a little more work)
Chapter 2 - Number Types
Chapter 3 - Strings
Chapter 4 - Booleans
Chapter 5 - Arrays
Chapter 6 - Structures (about 75% done)
Chapter 7 - File I/O (havnt started)
I envisioned this much as an introductory manual for someone who has never
used LabVIEW before. I have my own business in which one of the things I
had hoped to offer was LabVIEW training and thought that it would be more
cost effective if I could produce my own training manual than have potential
students buy a 3rd party book.
I'm not sure what to do now with what I have but these are my ideas.
1) Finish and polish what I have outlined above myself and see if I can sell
individual copies. I think that this would be appropriate for college
courses
using LabVIEW with a need to quickly teach LabVIEW newbies enough
to create vis for small experiments. Perhaps tailoring custom chapters to
show
how to use the classes particular hardware.
2) Find one or two people interested in working with me to make something
considerably more substantial, getting into advanced programming concepts
and
hardware programming concepts. This would continue to be a commercial
project.
3) Turn what I have so far into an open project. Divvy up the chapters and
subchapters
to individuals to really hammer out into something nice. This has a lot of
appeal for
a lot of reasons. I dont think it would be too difficult with the effort of
10-15 people
working a couple hours a week to produce a free document that is better than
all
the books currently on the market.
What do you say? Anyone interested in working on this project with me? I
think it
would be a great service to the community.
Send me e-mail or respond to this thread so I can get an idea of the level
of interest.
Make sure you let me know your LabVIEW background and what sections you
would be interested in working on. Suggestions for future chapters are
welcome, too.
(State Machines, Interface Nodes, GPIB, VXI, etc.)
Mark
Mark J. Sowa, Ph.D.
[email protected]
Strigidae Technologies, Inc.
w3.one.net/~marksowa
P.O. Box 531251
Cincinnati, OH 45253
Voice: (513) 259-9682
Fax: (513) 598-4203

I'm willing. 5 years experience doing GPIB and card-based DAQ along with
playing with niceties like ActiveX, both for external app control and to
expand the available selection of front panel controls. Reasonable amount of
time at the moment though I'm looking for a new job [anyone hiring? ] so
that may change.
A commercial book that gets published is better on the CV than a free one so
I favour working towards the former and doing it as a comprehensive work
that goes into depth. But at the order of 1k pages it's a formidable task.
Publication indicates a publisher thinks it's worthwhile; producing a free
book is an indication only of lots of free time to most people
Mark Sowa wrote in message
news:[email protected].
> 2) Find one or two people interested in working with me to make something
> considerably more substantial, getting into advanced programming concepts
> and
> hardware programming concepts. This would continue to be a commercial
> project.
ActiveX could be the basis of two chapters- "how/why to do it" and a
reference to the common apps and controls. The latter however is essentially
a reference to a load of M$ products and M$ may protest. There's a
continuous trickle of ActiveX messages online so it's probably worthwhile.
One problem is, is there actually a need for another Labview book? You've
started this simply as a tutorial handout to make the cost of your course
appear less. Personally I've not read all of the supplied documentation and
have not bought any Labview books. Aside from the crap "case study" thing NI
produce. There's a few out there already, and I'd need to be convinced the
project is worthwhile before pitching in!

Looking for LabVIEW Developer with 2-3 years of experience for Mumbai based Company

Software Plantation, Mumbai is currently looking for LabVIEW Developer who can contribute to the development of automated test, data acquisition, and control systems using National Instruments LabVIEW.
This position is located at Lokhandwala, Andheri West, Mumbai.
Requirements:
Applicant must meet the following criteria:
2+ years of LabVIEW experience.
Should be from Engineering background.
Knowledge of various communication protocols like RS-232, Modbus, USB, etc.
Knowledge of NI DAQ hardware boards.
Automated test, measurement, data acquisition, and/or control experience.
Good at documentation.
Knowledge of Software Development Cycle
Must be able to meet objectives as directed.
Ability to effectively work independently.
Ability to contribute and work in a team environment.
Ability to adapt to changing requirements, rapidly absorb new concepts, and apply them effectively.
Good communication skills.
CLAD certified developer will be preferred. Knowledge of C/C++, Linux is an added advantage.
If your background and qualifications match this position, please send your resume via email with subject line as: 'LabVIEW Developer Application'.
E-Mail: [email protected]
Note: Please do not post your resume on the job forum. Mail it to the above mentioned email ID.

Kindly send me your resumes on [email protected]

Adapting LabView to work with TestStand

I am currently trying to get TestStand 4.2 to work with VIs created in LabView 9.0.1. I looked in the LabView adapter and the development system that I am using is chosen. I am currently going through the booklet for using LabView with TestStand and it states that I must TestStand default value, but I can not find where this value exists.
Solved!
Go to Solution.

The folder of interest is below:
C:\Documents and Settings\All Users\Documents\National Instruments\TestStand 4.2.1\AdapterSupport\LabVIEW
I attached a picture of my folder contents.
I believe you need to copy 'TestStand - Default Values 86.llb' to 'TestStand - Default Values 90.llb'. Be sure after copying to make the LLB NOT read only before you mass compile. It may not be 86 or whatever version is installed by default.
I don't know where these VIs come into play but I have had to perform the copying when I was using Clusters in connector panes when I was calling LabVIEW VIs. There are probably other reasons.
Good luck,
PH
Attachments:
AdapterSupport.PNG ‏15 KB

LabVIEW Developer worked at Kista, Stockholm, Sweden

Hello All,
This is Puneet Kapoor, Indian citizen.
I do have almost 2 yrs of experience in LabVIEW Development and Automated Test Systems for various hardware boards.
I worked at Kista, Stockholm, Sweden for one of my LabVIEW project to develop Automated Test software for GSM Systems.
As my current project is on edge of completion, i am searching for change.
Please go through my resume attached herewith the mail.
Best Regards
Puneet Kapoor
CLA 2014
CCVID 2014
Attachments:
puneetkapoor.doc ‏56 KB

Hello,
I am Shubhlaxmi
Chandrikapure working in CC Engineer Private Limited,Pune.I have total
1 year and 7 months of experience in Labview.Knowledge of PC based
Data Aquisition,Rs232 Communication.I have done 3 projects.
Currently working On "ABSOLUTE BLOCK SYSTEM" Project which is design
for railway signals.Application describes how to change aspect of
signals with the help of excel sheet through Rs232 communication which
has 104 inputs and 600 outputs.The whole track is of 40fit with 6
stations.
Attachments:
Latest Resume1.doc ‏79 KB

Interested in working with an experience​d LabVIEW Developer?

Similar Messages

Maybe you are looking for

Interested in working with an experienced LabVIEW Developer?