Interesting- but so far seems OK

Well, the beastie is up and running nicely. I notice on the 20" monitors in dual screen edit mode the canvas and viewer are showing 130% to fill the window. VERY slightly degraded, but that's ok because 'm using an external monitor for everything critical.
Nothing chokes on playback, the Sony monitor looks good. But should I ruin the beautiful symmetry and shrink the windows down to 100%?
Is my addled brain missing something here?

I think that's one of the things that's handled by the GPU, but I'll stand corrected if someone has authoritative info.
There is no one here who's more knowledgeable about hardware than you, BC.
You're absolutely right - processing for the zoom level in the Viewer & Canvas is tackled by the GPU.
Just to throw it out there, the only display mode processing that I've noticed effecting the CPU/system's performance is setting background values in the Viewer/Canvas (aka , White, Checkboard 1, Checkerboard 2, etc) to something other than Black. But I doubt this is a factor for G5 Quads.

Similar Messages

The Wifi storage options are interesting but it seems they only allow to read files from the device on the iPad but not transfer files to the storage device via WiFi. I'm looking for a possibility to use the iPad for photography while traveling, without

the Wifi storage options are interesting but it seems they only allow to read files from the device on the iPad but not transfer files to the storage device via WiFi.
I'm looking for a possibility to use the iPad for photography while traveling, without the access to a computer.
Shooting photo's in RAW format crates pretty big files that will fill up the iPad's memory pretty fast if you shoot a lot during a (let's say) month long trip.
my idea was to use load the photo's to the iPad so i could view them and sort out any bad ones. then copy them over to the storage device so i can continue using my CF cards for shooting. I have an image thank for copying the photo's directly to the HDD but it would be so sweet to be able to check them on the iPad before hand.
any suggestions?

Check out pogo plug device, it allows you to upload camera roll via wifi.

My battery drained. Screen shows battery with red line but doesn't seem to be recharding after 20 min. Should I wait or do a hard restart? I haven't backedup in ages and don't want to lose pics, contacts etc.

My battery drained. Pluged in to wall but screen shows battery with red line but doesn't seem to be recharding after 20 min. Should I wait longer or do a hard restart? I haven't backedup in ages and don't want to lose pics, contacts etc. Will a hard restart wipe all that out?

Agree with Richard:
-Your device needs both the CR and LF. To accomplish this:
option 1: Concatenate the "end of line" string constant (this is a combination of CR and LF, located in the string pallete) to all your outgoing commands. Make sure in the "Visa configure serial port" the "Termination character enable" flag is false.
option 2: Concatenate only a CR to your command's strings. Make sure in the "Visa configure serial port" the "Termination character enable" flag is TRUE AND that the termination character is set to 10 (meaning LF) which I think is the default.
Details can be seen in this link:
http://digital.ni.com/public.nsf/allkb/862567530005F09C862565BE005AB500
"Adding Termination Characters to VISA Serial Writes in LabVIEW"
Interesting would be to configure the serial port to accept not one but two termination characters. The above links refers to the document "Developer Zone Tutorial: Termination Characters in NI-VISA.", where this is supposed to be possible. The document however is 404'ed.
If someone find a working link please post it.
Regards

I must be thick, but I cant seem to turn my 3gs from portrait to l/scape. Help?? MW

i must b thick, but I cant seem to make my 3gs go from portrait to landscape. What am I not doing? theorganiste.

You have probably set 'Orientation Lock' on.
You can turn this off buy double clicking the home button (to bring up loaded app) and slide it to the left.
This will now show you iPod controls and the far left icon is Orientation lock.
Click this to turn it off and then test Landscape/Portrait

I recently purchased a Canon 7D. I own Adobe Photoshop/Bridge CS5. I cannot open my raw images in Bridge. I have tried to download the plug in but does not seem to work. Please Help, I need to be able to open my raw images in Bridge ASAP. I do not want to

I recently purchased a Canon 7D. I own Adobe Photoshop/Bridge CS5. I cannot open my raw images in Bridge. I have tried to download the plug in but does not seem to work. Please Help, I need to be able to open my raw images in Bridge ASAP. I do not want to upgrade to CS6 at this time.

If you had given us sensible information, I could look it up for you if your efforts fail.
Right now, I don't even know if you are on a Mac or on a Windows box.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Flashplayer plugin installs but doesn't seem to run. Windows 7 X 64 - Firefox 28 - Flashplayer 13

Due to a power problem I had to reinstall Windows 7 X 64 so this is a clean install only a few days old. I installed Firefox 28 as administrator and recovered my bookmarks from the mirrored disk which had undamaged files but a non-repairable operating system. I installed several plugins which had heretofore worked properly including the Flash-player plugin. This is the file name of the install script I downloaded from the Adobe download site: install_flashplayer13x32_mssd_aaa_aih.exe. That tells me it is the 32 bit version so it should be the right one.
Everything works but the Flash-player. All the plugins had been installed as administrator. No glitches or anything unusual happened during the install. Everything seemed to work OK until I visited YouTube and it told me I needed to install Flash-player. Facebook doesn't like my Firefox browser for the same reason.
I have gone through the forums and the install procedures (removed Firefox completely from the system & re-installed it according to the instructions) and have no solution so far. It had been working before the power problems caused the operating system crash but I do not remember the Firefox version or the Flash-player versions I had been using.
Any help you can give would be appreciated. I am missing something but so far haven't discovered what it is.
Thanks...
lefty2c9

Your system details shows that you don't have any version of Flash installed. The one you "installed"(''install_flashplayer13x32_mssd_aaa_aih.exe'') I don't know where that is from.<br>
You can install the correct version below:
*http://get.adobe.com/flashplayer/

Trying to use AX as an extender and wired point but can't seem to make it work, help plz

Hello,
I'm currently using a ISP supplied huawei HG8245, and using an AX to supply the lower floor satellite receiver with a wired connection and was also hoping to use it as a range extender for the huawei, but failed so far the wired point is working, and light is green, but as soon as i flip it into "extend wireless network" it goes yellow with the error that it cant extend the netwrok.
i tried looking around the huawei set up but cant seem to find the equivalent of "allow network extension" but so far nothing is coming up.
i would appreciate some help...

Unfortunately, Apple's "extend a wireless network" appears to be a proprietary function that will only work among Apple routers, if you are trying to extend your network wirelessly.
Another way of saying the same thing is that you need to have two Apple routers on the network to be able to "extend a wireless network".
Here is what Apple's product literature for the AirPort Express says about this subject:
Extend an existing Wi-Fi network’s range.
If you already have a wireless network in your home and want to extend its range, AirPort Express can help. Just place it in range of your primary base station — an AirPort Extreme, Time Capsule, or another AirPort Express
Ironically, the AirPort Express will "join" virtually any wireless network and the Ethernet port is enabled in this type of setup. But, the AirPort Express will not provide any additional wireless signal coverage when it "joins" a wireless network.

I've read that there is an add-on that adds Sync, included with FF starting with 4.0, to Firefox 3.6, but can't seem to find it. I'd like to use it to merge my 3.6 stuff into my FF11 profile...

I've read that there is an add-on that adds Sync, included with FF starting with 4.0, to Firefox 3.6, but can't seem to find it. I need to keep a zoo of different browser versions, including 3.x, but want to sync stuff nonetheless.
So far, I tried variants of "Weave" and "Sync" on addons.m.o, and Google, but to no avail.

I use several different computers, different software, and a mobile device, too. I have the bulk of my important data in a FF3.6 profile, and I also need to keep the FF3.6 for web development purposes (every version renders slightly different, but the difference between 3.6 and 11 is very noticable). Also, FF11 has some problems, like forgetting passwords, but accrued an independent set of bookmarks, passwords, add-ons etc., so trashing that is not an option, either (although I am usually on 11 these days). Wading through tons of stuff to merge is not a good option either, and Sync would have helped to unify all of that.
@TonyE: Would Xmarks and LastPass merge with Sync data from newer FF? I'll give that a whirl.
@cor-el: Thank you for the link. It does explain the current situation, but the arguments put forward in that article are that highly aggravating marketing speak that I have come to expect from the Mozilla Corp. guys.
I still don't understand why they couldn't let the addon online for a few more days, maybe with a disclaimer that support ran out on mm/dd/yyyy, and that it will e.g. be pulled together with the main product.
@Tylerdowner: I'll probably try to merge the stuff from 3.6 into 11 by creating another FF11 profile and then use Sync between them.
@all: Thank you so far. If someone has a pointer for where to get eg. the source code of the pulled Sync, I'd highly appreciate that, too.

Personal hotspot on my iphone 5s doesnt work. my laptop can see it and it seems to make initial contact but then it seems to give up and gives a failure message.

Personal hotspot on my iphone 5s operating ios7.1.2 doesnt work. my work laptop can see it and the phone initially registers contact but then it seems to give up and the connection always fails. i have tried resetting settings, switching hotspot on/off, switching 4g on off and nothing seems to work. it worked fine on the same service plan with EE on my old 4s. can anyone help?

Dear brothers
Thanking you so much to be interested about my answer but what I figured out is as long as you bought your iPhone from gulf or Arabian area it will not has face time application cause I think apple has made special software for Arabian areana to privent facetime according to special request by phone cells companies and one of my friends has told me if you want to make sure that your iPhone not for Arabian areana you should check the model number on your iPhone backside if it ends with 29 it means it's for Arabian countries if other numbers it's gonna be for US. Or Hongkong so it's ok
That's all I could know if you have another solution just please let me know
Thanks for all answers

When I connect my ipod to computer and open itunes, the songs on my ipod do not show up on the itunes library...it is blank...songs are still on my ipod but don't seem to show up on computer..help??

When I connect my ipod to computer and open itunes, the songs on my ipod do not show up on the itunes library...it is blank...songs are still on my ipod but don't seem to show up on computer..help??

Download this for getting media off your ipod!http://www.macupdate.com/app/mac/19890/ipoddisk
Hope this helped!

How can I transfer photos from an IPhone 5 to an IPad 2 using a cable. I have tried using the lightning to firewire adapter with my current lead but this only seems to allow a download from the Ipad to the Iphone and not the other way around.

How can I transfer photos from an IPhone 5 to an IPad 2 using a cable. I have tried using the lightning to firewire adapter with my current lead but this only seems to allow a download from the IPad to the IPhone and not the other way around.

The devices are not designed for transfer of that kind. Use Photo Stream as suggested by another poster, or transfer photos to your computer (a good idea anyway since they will be lost if your device needs to be reset), then use iTunes to sync them to the other devices.

Using the mini hdmi cord to connect the macbook air and my tv I cannot seem to have anything appear or be heard on my tv.. the MacBook air will flash blue like it is connecting but nothing will seem to work Any advice?

Using the mini hdmi cord to connect the macbook air and my tv I cannot seem to have anything appear or be heard on my tv.. the MacBook air will flash blue like it is connecting but nothing will seem to work Any advice?

Hi kxh3011,
Thank you for using Apple Support Communities.
This feature is called closed clamshell mode. To learn more about using closed clamshell mode with an external display and how to set it up, please take a look at the article below.
Mac notebooks: How to use your computer in closed clamshell (display closed) mode with an external display
Cheers,
Alex H.

Hi, i am a littl confused as I logged into creative cloud and bough the in design plan for a year but i cant seem to donwload it... there is a window that pops up and it says its downloading but its taking forever? any advice?

hi, i am a littl confused as I logged into creative cloud and bough the in design plan for a year but i cant seem to donwload it... there is a window that pops up and it says its downloading but its taking forever? any advice?

Hi Dima,
Please refer to the help documents below:
Troubleshoot Creative Cloud download and install issues
Error downloading, installing, or updating Creative Cloud applications
Regards,
Sheena

HT1338 my MAc Book PRO 13" Retina display will not update. It crashes every time I try to do an update. I have sent in the information on each update but so far nothing back from Apple.

my MAc Book PRO 13" Retina display will not update. It crashes every time I try to do an update. I have sent in the information on each update but so far nothing back from Apple. Also it does not matter what I am trying to update, the operating system, and application, each caused the same crash. This mac book is less than a month old.

That is the highest you will be able to go with 3g. You need 3gs or 4 to go any higher (multi processors and more memory needed). Version 4.2.1 marks the end of your updates for that device.

HT1338 My mac is becoming too slow. It takes long to open word documents, pdf files or excel documents or even safari. Can anybody suggest something? I have tried to reduce the number of open applications, but does not seem to work.

My mac is becoming too slow. It takes long to open word documents, pdf files or excel documents or even safari. Can anybody suggest something? I have tried to reduce the number of open applications, but does not seem to work.

Hi ...
Checked to see how much free space there is on the startup disk lately?
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure there's a minimum of 15% free disk space.
Freeing Up Hard Disk Space - Mac GuidesFreeing Up Hard Disk Space - Mac Guides
If disk space is not the issue, booting in Safe Mode deletes system caches that may help.
A Safe Mode boot takes longer then a normal boot so be patient.
Once you see the Desktop, click the Apple menu icon top left corner of the screen.
From the drop down menu click Restart.
See if that makes a difference ...

Interesting- but so far seems OK

Similar Messages

Maybe you are looking for