Interesting - Different views when creating substitute rule in UWL and normal view
Hi Guys,
Just came across something interesting i thought i should mentioned it here incase someone knows why. When creating the substitute rule on the MSS main page one gets the window without a small road map, however if you do that via the UWL menu you get a nice view with a road map.
From the main page when you click on the create rule button you get this
=>
From the UWL side menu you get this, but the button being clicked is teh same. Anyone know how this works and how to make it the same ?
Moderator Spotlight - Siddharth Rajora Thank you very much for your reply. So just to clarify a few things
Is it possible at all to have the road map when creating substitution rules from the main MSS lane/manager view on the main page? I am on Webdynpro ABAP. If so can you please help with the steps.
I am right in saying that the road map view in UWL is based on WEBDYNPRO JAVA?
We are currently on ECC6 EH6, would i be correct to tell the boss that road map will is not available in EHP7
Basically the boss would like the road map from the main MSS lane/Launch pad. Thats what he prefers. I have tried to identify the application that is used to display the road map but i cant find it, it looks like its not WEBDYNPRO ABAP. In UWL view When I right click on th button i do not get the technical help to see the application which is what i normally do and it works on the launch pad/MSS lane
Similar Messages
-
I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is not installed. When it opens there is a red screen in the monitor panel with Korean writing which also appears in the place of each clip in the video. I tried uninstalling and reinstalling premiere elements 10, but that did not have any effect on the video. Do you have any suggestions? I researched codec, but do not understand them at all.
gloucester
In case you did not find it, the following is a copy/paste of the Announcement on Premiere Elements 19/NVIDIA GeForce
that appears at the top of this forum.
Premiere Elements 10 NVIDIA Video Card Driver Roll Back
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
back the video card driver version instead of assuring that it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies
to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of
the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere
Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
ATR -
Error in creating transfer rules beween infosource and datasource in BI 7.0
Hello Guys
I am gettting the following error when trying to create transfer rules between infosource and datasource.
1. Error while activating transformation
2. Deletion of Objects with Type Transformation
3. Preprocessing/Collecting DDIC Objects for Transfor mation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
4. Post Processing/Checking the Deletion for Transfor mation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
5. Object Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K has been deleted
6. Name of object of type 'TRCS' is missing
7. Name of object of type 'TRCS' is missing
8.Key rule 1 (target field: 0COMP_CODE): Initial update set
9. Key rule 2 (target field: 0PLANT): Initial update set
10. Key rule 3 (target field: 0OI_EBELN): Initial update set
11. Key rule 4 (target field: 0AC_DOC_NO): Initial update set
12. No rule exists
13. Saving Objects with Type Transformation
14. Saving Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
15. Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K saved successfully
16. Activation of Objects with Type Transformation
17. Saving Objects with Type Transformation
18. Internal Activation (Transformation )
19. Preprocessing / Creation of DDIC Objects for Trans formation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
20. Post Processing/Checking the Activation for Transf ormation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
21. Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K was activated
22. Syntax error in GP_ERR_RSTRAN_MASTER_TMPL, row 1,644 (-> long text)
23. Error during generation
24. Error when activating Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
25. Resetting of Incorrect Objects Back to the Active Version (Transformation )
26. Preprocessing / Creation of DDIC Objects for Trans formation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
27. Post Processing/Checking the Activation for Transf ormation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
28. Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K was activated
29. Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K was reset to the active version
Can anyone send me a document on how to create cubes, info and data sources,ODS's,multicubes and t/f and update rules in BI 7.0
Thanks.Transformations in BI7
http://help.sap.com/saphelp_nw04s/helpdata/en/f8/7913426e48db2ce10000000a1550b0/content.htm
Regards,
R.Ravi -
Why the every time Empty view is created. what is the use of Empty view?
Hai Experts,
im working on Web Dynpro ABAP i have doubt when ever we create the component One window and
one View created by default.but logicaly one empty view also created (not physically).
can u please explain me why the empty view is created what is the usde of it.
this is not a interview question .i searched the forums i cant get answer.
Thanks in adv.hi ,
empty is not a mandatory thing in webdynpro component .. but to get the perfect picture about the importance and usage of this Empty views and Empty windows. * i suggest you to check the statefull stateless webdynpro componet and relate the same*
pl find the same in below URL:
[http://help.sap.com/saphelp_NW70EHP1core/helpdata/en/e0/202d4108f08739e10000000a1550b0/content.htm]
hope it helps you,
Regards,
Kranthi. -
Getting Connection error while creating Substituion Rule in UWL
Hi Everybody,
Getting below error while creating Substitution Rules in UWL.
"error for the u201Cconnectionu201D to SAP_R3_Finance ".
Can be able to see all Work Items belongs to me. getting the errror while creating Substitution Rule only..
Could anybody tell me what might be the Reason what steps i need to take to resolve this issue.
Thanks,
Naveen KumarHi Uds,
are you running SOA Suite on a Linux server and not on your PC and just running JDeveloper on your PC?
If so try creating the repository file specifying a directory on the Linux server.
For example to:
/tmp/sample_repository
So Choose 'File' from drop down menu
Enter /tmp/sample_repository
Click on create button
This should create the file called sample_repository in /tmp on the Linux server.
Can you tell us what your environment is?
Regards Cel -
I did try in all of them and it doesnt work it apears like that........
The share operation Master File has failed
The operation could not be completed because an error occurred when creating frame 608 (error -1).
and i dont know what to do plese hlp me....
Re: when i try to share my project to quicktime aroun 50% appears error -1 and i can't share it what to do please helpDouble post…
-
Why am I getting two different conversations when the same person txts me and sends me an I message? I thought they should be in the same conversation?
I'm experiencing something similar. My conversations are kept together but if the screen is opened to a conversation and I receive a text from that person it doesn't show up on the screen. The message alert in the upper corner indicates a new text but I have to back out of the screen and go back in to read it.
-
Error while saving RTOM based campagin when creating the rules
Hi Experts,
My requirement is to configure RTOM in the system. I have created RTOM based campaign and when I maintain conditions in u201CEligibility and Agent skills Rulesu201D assignment block, I am unable to save the campaign. It throws the following error despite maintaining all the required settings in spro.
u201C Error while saving the rule; Contact technical support
Error in rule; navigate to rule details screen to correct it
Data not saved; save log u201D
Looking forward for your responses.
Kindly guide me to a way out for resolving this issue.
Thanks in Advance,
ShruthiHi Shruthi,
I know this has been a long while since you posted the question, how did you resolve this error because I am getting the same error.
Many thanks,
Garikai. -
Problem occured when create a tree table for master-detail view objects using SQL queries?
I am programming a tree table for master-detail view objects using SQL queries and these 2 view objects are not simple singel tables queries, and 2 complex SQL are prepared for master and view objects. see below:
1. Master View object (key attribute is SourceBlock and some varaible bindings are used for this view object.)
SELECT cntr_list.SOURCE_BLOCK,
sum(
case when cntr_list.cntr_size_q = '20'
then cntr_list.cntr_qty
else 0 end ) as cntr20 ,
sum(
case when cntr_list.cntr_size_q = '40'
then cntr_list.cntr_qty
else 0 end ) as cntr40 ,
sum(
case when cntr_list.cntr_size_q = '45'
then cntr_list.cntr_qty
else 0 end ) as cntr45
FROM (
SELECT yb1.BLOCK_M as SOURCE_BLOCK,
scn.CNTR_SIZE_Q,
count(scn.CNTR_SIZE_Q) AS cntr_qty
FROM SHIFT_CMR scm, SHIFT_CNTR scn, YARD_BLOCK yb1, YARD_BLOCK yb2
WHERE
scm.cmr_n = scn.cmr_n
AND (scm.plan_start_dt BETWEEN to_date(:DateFrom,'YYYY/MM/DD HH24:MI:SS') AND to_date(:DateTo,'YYYY/MM/DD HH24:MI:SS')
OR scm.plan_end_dt BETWEEN to_date(:DateFrom,'YYYY/MM/DD HH24:MI:SS') AND to_date(:DateTo,'YYYY/MM/DD HH24:MI:SS'))
AND scm.shift_mode_c = :ShiftModeCode
AND scm.end_terminal_c = :TerminalCode
AND scm.start_terminal_c = yb1.terminal_c
AND scm.start_block_n = yb1.block_n
AND substr(scn.start_location_c,(instr(scn.start_location_c,',',1,5)+1),instr(scn.start_location_c,',',1,6)-(instr(scn.start_location_c,',',1,5)+1)) BETWEEN yb1.slot_from_n AND yb1.slot_to_n
AND scm.end_terminal_c = yb2.terminal_c
AND scm.end_block_n = yb2.block_n
AND substr(scn.end_location_c,(instr(scn.end_location_c,',',1,5)+1),instr(scn.end_location_c,',',1,6)-(instr(scn.end_location_c,',',1,5)+1)) BETWEEN yb2.slot_from_n AND yb2.slot_to_n
AND scn.status_c not in (1, 11)
AND scn.shift_type_c = 'V'
AND scn.source_c = 'S'
GROUP BY yb1.BLOCK_M, scn.CNTR_SIZE_Q
) cntr_list
GROUP BY cntr_list.SOURCE_BLOCK
2. Detail View object (key attributes are SourceBlock and EndBlock and same varaible bindings are used for this view object.)
SELECT cntr_list.SOURCE_BLOCK, cntr_list.END_BLOCK,
sum(
case when cntr_list.cntr_size_q = '20'
then cntr_list.cntr_qty
else 0 end ) as cntr20 ,
sum(
case when cntr_list.cntr_size_q = '40'
then cntr_list.cntr_qty
else 0 end ) as cntr40 ,
sum(
case when cntr_list.cntr_size_q = '45'
then cntr_list.cntr_qty
else 0 end ) as cntr45
FROM (
SELECT yb1.BLOCK_M as SOURCE_BLOCK,
yb2.BLOCK_M as END_BLOCK,
scn.CNTR_SIZE_Q,
count(scn.CNTR_SIZE_Q) AS cntr_qty
FROM SHIFT_CMR scm, SHIFT_CNTR scn, YARD_BLOCK yb1, YARD_BLOCK yb2
WHERE
scm.cmr_n = scn.cmr_n
AND (scm.plan_start_dt BETWEEN to_date(:DateFrom,'YYYY/MM/DD HH24:MI:SS') AND to_date(:DateTo,'YYYY/MM/DD HH24:MI:SS')
OR scm.plan_end_dt BETWEEN to_date(:DateFrom,'YYYY/MM/DD HH24:MI:SS') AND to_date(:DateTo,'YYYY/MM/DD HH24:MI:SS'))
AND scm.shift_mode_c = :ShiftModeCode
AND scm.end_terminal_c = :TerminalCode
AND scm.start_terminal_c = yb1.terminal_c
AND scm.start_block_n = yb1.block_n
AND substr(scn.start_location_c,(instr(scn.start_location_c,',',1,5)+1),instr(scn.start_location_c,',',1,6)-(instr(scn.start_location_c,',',1,5)+1)) BETWEEN yb1.slot_from_n AND yb1.slot_to_n
AND scm.end_terminal_c = yb2.terminal_c
AND scm.end_block_n = yb2.block_n
AND substr(scn.end_location_c,(instr(scn.end_location_c,',',1,5)+1),instr(scn.end_location_c,',',1,6)-(instr(scn.end_location_c,',',1,5)+1)) BETWEEN yb2.slot_from_n AND yb2.slot_to_n
AND scn.status_c not in (1, 11)
AND scn.shift_type_c = 'V'
AND scn.source_c = 'S'
GROUP BY yb1.BLOCK_M, yb2.BLOCK_M, scn.CNTR_SIZE_Q
) cntr_list
GROUP BY cntr_list.SOURCE_BLOCK, cntr_list.END_BLOCK
3. I create a view link to create master-detail relationship for these 2 view objects.
masterview.SourceBlock (1)->detailview.SourceBlock (*).
4. I create a tree table using these 2 view objects with master-detail relationship.
When I set default value for variable bindings of these 2 view objects and the matching records exist, tree table can work well. I can expand the master row to display detail row in UI.
But I need to pass in dymamic parameter value for variable bindings of these 2 view objects, tree table cannnot work again. when I expand the master row and no detail row are displayed in UI.
I am sure that I pass in correct parameter value for master/detail view objects and matching records exist.
Managed Bean:
DCIteratorBinding dc = (DCIteratorBinding)evaluteEL("#{bindings.MasterView1Iterator}");
ViewObject vo = dc.getViewObject();
System.out.println("Before MasterView1Iterator vo.getEstimatedRowCount()="+ vo.getEstimatedRowCount());
System.out.println("Before MasterView1Iterator ShiftModeCode="+ vo.ensureVariableManager().getVariableValue("ShiftModeCode"));
vo.ensureVariableManager().setVariableValue("DateFrom", dateFrom);
vo.ensureVariableManager().setVariableValue("DateTo", dateTo);
vo.ensureVariableManager().setVariableValue("ShiftModeCode", shiftModeC);
vo.ensureVariableManager().setVariableValue("TerminalCode", terminalCode);
vo.executeQuery();
System.out.println("MasterView1Iterator vo.getEstimatedRowCount()="+ vo.getEstimatedRowCount());
DCIteratorBinding dc1 = (DCIteratorBinding)evaluteEL("#{bindings.DetailView1Iterator}");
ViewObject vo1 = dc1.getViewObject();
System.out.println("Before DetailView1Iterator vo1.getEstimatedRowCount()="+ vo1.getEstimatedRowCount());
System.out.println("Before DetailView1Iterator ShiftModeCode="+ vo1.ensureVariableManager().getVariableValue("ShiftModeCode"));
vo1.ensureVariableManager().setVariableValue("DateFrom", dateFrom);
vo1.ensureVariableManager().setVariableValue("DateTo", dateTo);
vo1.ensureVariableManager().setVariableValue("ShiftModeCode", shiftModeC);
vo1.ensureVariableManager().setVariableValue("TerminalCode", terminalCode);
vo1.executeQuery();
System.out.println("after DetailView1Iterator vo1.getEstimatedRowCount()="+ vo1.getEstimatedRowCount());
5. What's wrong in my implementation? I don't have no problem to implement such a tree table if using simple master-detail tables view object, but now I have to use such 2 view objects using complex SQL for my requirement and variable bindings are necessary for detail view object although I also think a bit strange by myself.Hi Frank,
Thank you and it can work.
public void setLowHighSalaryRangeForDetailEmployeesAccessorViewObject(Number lowSalary,
Number highSalary) {
Row r = getCurrentRow();
if (r != null) {
RowSet rs = (RowSet)r.getAttribute("EmpView");
if (rs != null) {
ViewObject accessorVO = rs.getViewObject();
accessorVO.setNamedWhereClauseParam("LowSalary", lowSalary);
accessorVO.setNamedWhereClauseParam("HighSalary", highSalary);
executeQuery();
but I have a quesiton in this way. in code snippet, it is first getting current row of current master VO to determine if update variables value of detail VO. in my case, current row is possibly null after executeQuery() of master VO and I have to change current row manually like below.
any idea?
DCIteratorBinding dc = (DCIteratorBinding)ADFUtil.evaluateEL("#{bindings.SSForecastSourceBlockView1Iterator}");
ViewObject vo = dc.getViewObject();
vo.ensureVariableManager().setVariableValue("DateFrom", dateFrom);
vo.ensureVariableManager().setVariableValue("DateTo", dateTo);
vo.ensureVariableManager().setVariableValue("ShiftModeCode", shiftModeC);
vo.ensureVariableManager().setVariableValue("TerminalCode", terminalCode);
vo.executeQuery();
vo.setCurrentRowAtRangeIndex(0);
((SSForecastSourceBlockViewImpl)vo).synchornizeAccessorVOVariableValues(); -
Problem when creating update rules
Hi Friends..
I'm actually having a problem when I'm creating update rules from my cube to my Infosource. This infosource is created by Dierct update of Master data (ZXXXX) Infoobject. the error which is popping up is ,
Data source ZMMOBJ1 not maintained (check your entries)
Message no. RSAU252
Diagnosis
The data source is not active
Can some one guide me, How I can resolve this error.??
and where the problem must have been??
Thanks alot in advance,Hi,
Check the infosource you are using for the cube. you cant use direct update infosource.
'Direct update of master data' infosource updates into the infoobject.
you will not have update rules for this direct update.
you use update rules only when you use flexible update infosource.
hope its clear.
shylaja. -
NPE when create Business Rules in SCA in JDEV
I got this error message when try to create Business Rules in SOA composite with input/output.
My JDEV Build is JDEVADF_11.1.1.6.0_GENERIC_111205.1733.6192.1
java.lang.NullPointerException
at oracle.tip.tools.ide.rules.dictionarybuilder.jdev.JDevDictionaryFileBuilder.createRuleDictionary(JDevDictionaryFileBuilder.java:377)
at oracle.tip.tools.ide.rules.dictionarybuilder.RulesCreationDialog$1.run(RulesCreationDialog.java:101)
at java.lang.Thread.run(Thread.java:619)
When I tried to create Business Rules without input/output, it is created OK.I'm still having this problem. I checked that RMI is running but whenever I try to enter in Planning the logs write that it can't connect to the eas database, and HBRPluginData relational table isn't being filled.
-
Text is pixelated in Adobe Viewer when creating an app in indesign
I am trying to create an app in indesign, I put the docuement in the folio builder, and then view it on my iphone through Adobe Viewer. The text that I've typed in directly in indesign appears pixelated, along with any thing I placed from photoshop. In Indesign I've made the object High Quality Display, took out all layers except the text layer, even saved the photoshop text image as a pdf and placed it in indesign, still pixelated.
Help please.Thanks Neil, I did all 3 as per your suggestion: version 25, PDF, and 960*640, and it worked. But b/c of the PDF option, I believe that was the reason why each page opened up from blurry to clear, which is actually a cool looking effect, however, on some legnthy text frames, the blur took a bit too long to clear.
So I created another folio, version 25, 960*640 and this time kept it Automatic, and it's just as clear as the PDF folio, but there's no initial blur. -
HOW CAN I GET A DIFFERENT STATE WHEN CREATE THE VM
All i Always get is
Country
United States (US)
Region Washington (WA)
City Redmond
ZIP code
98052
What do i do to change the state ...Please helpHi,
Would you be able to provide us details as to when you get State option while creating a VM?
Is the address you have mentioned your billing address? Does this come up in the Management portal or the Billing portal?
You could refer the following link to create a Windows VM in Azure:
http://azure.microsoft.com/en-us/documentation/articles/virtual-machines-create-custom/
If you notice in the article, when creating a VM in the Management Portal, it only prompts you for the region, affinity group or Virtual Network, as shown below.
Regards,
Malar. -
Is there a way to create a rule that sends and Auto Response for a shared mailbox?
I have a shared mailbox set up that receives emails that are sent to 3 different addresses:
[email protected]
[email protected]
[email protected]
I would like to create a rule that would send an auto response when someone emails one of these addresses. However, I don't want an auto response sent to [email protected] so I can't just set up an "out of office" reply for the mailbox.
Is there a way that I can create a rule to send an automated response to 2 of the 3 addresses?
NateHi
we can enable the shared mailbox in ADUC and create Outlook rules for it in Outlook to achieve it. please follow these steps:
1. In Active Directory Users and Computers, right-click the shared mailbox and click Enable Account.
2. Configure the Outlook account for the shared mailbox in Outlook.
3. Click Rules > Manage Rules & Alerts.
4. Create a rule like the following format:
Apply this rule after the message arrives
Have server reply using a specific message
Except if the subject contains specific words
Select exception(s) (if necessary) of the Outlook Rule - (“except if from people or public group“)
5. Apply the auto reply rules for this shared mailbox.
Then users can receive auto reply of the shared mailbox except the exceptions we have set when they send messages to this shared mailbox.
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you -
Odbcad32.exe errors when creating DSN using 9i client and 9.02.00.65
Hi,
I am about at the end of my rope. I have a brand new Windows xp sp2 machine. I have tried installing, uninstalling deleteing all registry keys, deleting directories, installing the full 92010NT_CLT then installing just the run time, then installing different ODBC drivers - from 9.018 - through 9.2.065 - I have been through the message that I needed a newerr version of the OUI etc etc, I finally found a thread that led me to to ODAC92070 which then I installed - geez!
ALL these configurations resulted in ODBC crashing when creating a DSN! weak! In just about every situation that I had the patience to test TOAD it worked fine - however from the command line SQLPLUS would crash too when connecting - even the MS Driver works sort of - in most situations. What in the world do I need to do to get the ODBC Administrator to not crash when creating an Oracle DSN.
Thanks
JerryHi,
I am about at the end of my rope. I have a brand new Windows xp sp2 machine. I have tried installing, uninstalling deleteing all registry keys, deleting directories, installing the full 92010NT_CLT then installing just the run time, then installing different ODBC drivers - from 9.018 - through 9.2.065 - I have been through the message that I needed a newerr version of the OUI etc etc, I finally found a thread that led me to to ODAC92070 which then I installed - geez!
ALL these configurations resulted in ODBC crashing when creating a DSN! weak! In just about every situation that I had the patience to test TOAD it worked fine - however from the command line SQLPLUS would crash too when connecting - even the MS Driver works sort of - in most situations. What in the world do I need to do to get the ODBC Administrator to not crash when creating an Oracle DSN.
Thanks
Jerry
Maybe you are looking for
-
How do I sync 3 phones on one computer?
My daughters have new iphone 5's. We need to connect them to my computer to get their music but I do not want my contacts to dump onto their iphones. How do I prevent this?
-
Issue in Adding Custom Status Defnition for a resource object
Hi, We have installed OIM and patch it to 9.102. We have created one custom resource object (flat file connector) for reconciliation. As part of requirement we need to define three status for this resource object - Enabled, Suspended and Disabled. As
-
How to edit text in design mode - i.e get an I cursor instead of arrow
DW CS6 This is a very basic unclear on concept question. I normally work in code view and have no problems. Sometimes there is a large block of text within a paragraph which is in a div. I would like to correct a simple typo or insert some more text
-
Aggregation with a parent child hierarchy
Hi I have 2 tables, hierarchy and data hierarchy has 2 columns parent and child data contains values for the lowest rungs of the hierarchy described. What i'd like to do is, using the hierarchy described, sum the lowest rung values up to their parent
-
I frequently get errors in the Weblogic log file (actually a nohup.out file) with the following error: <Sep 16, 2002 4:39:25 PM CDT> <Error> <HTTP> <[WebAppServletContext(5997858,esn,/esn)] Servlet failed with