Interesting error on delete of multiple files

Hi all, none of the posts I found with errors on deletion or recycle bin errors discussed what I found.
I am a LR1.4 user, just installed LR 2 Trial, and did my first shoot review.
I marked about 25 files as rejected, hit Ctrl+Backspace to remove rejected photos, and selected delete from disk. After about a dozen deletions, LR reported that file XYZ could not be moved to the recycle bin. Well, I DON'T USE the recycle bin! Windows XP is set up to delete all files. I checked the image - no locks - and tried again. It continued and finished successfully, even deleting the file it first complained about.
I encountered a similar error prior to this, when moving files to another folder, which was also fixed by repeating the command, but I didn't note the exact error message, because it worked and I thought it was a fluke error.
My equipment is as follows:
Toshiba A100-SK4 Laptop,
Intel Centrino Core Solo 1.86GHz,
2GB DDR2 RAM,
160GB, 7200RPM Seagate Momentus HD, with 30GB free,
Integrated Intel GMA, running @ 1280x800x24-bit colour,
Windows XP SP2,
DVD drive.
Anyone else found this? When I get time, I'll do some more tests, and send a bug report to Adobe (unless you're reading, and would like to request specific tests.) :-)
Thanks,
Kai

I experience exactly the same problem with LR3 and LR4. Deleting multiple fotos in differen folders using some filters (i.G. all X-ed fotos of the past two months) I get following messages:
Basically it says that a folder and the LR catalog in the trash bin is missing and has to be recreated. Usually I get a full bunch of such messages. Deleting 150 fotos I have to click on 30 to 40 error messages. Very annoying.
Deleting manually selected fotos from a single folder works  as expected.
Any idea?
Sergio

Similar Messages

  • HT5731 After following the instructions to clear a -50 error and deleted the .tmp file, I am now getting a -150 error. What next?

    After folling the instructions to clear a -50 error and deleted the .tmp file, I now am getting a -120 error. I can't find instructions to clear this...What next?

    Hello jimlcoff,
    I found a couple of articles with steps you can take when you are not able to connect to the iTunes Store.  I recommend reviewing the following articles:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Error in loading the multiple file loading

    hi,
    i am following this blog to load the multiple files into rdbms table.
    http://www.odigurus.com/2011/05/multiple-files-single-target-table.html
    the problem is that when i assign the source Flat file Datastore
    Model Resource Name #Project_Name.FILE_NAME
    But when i point the Single File in the  Resource Name:EMP.DMP. its working fine. loaded suceessfully.... But problem in Multiple loading???
    it gives me error
    SQL*Loader-500: Unable to open file (E:/File/#Project_Name.FILE_NAME)
    SQL*Loader-553: file not found
    SQL*Loader-509: System error: The system cannot find the file specified.
    SQL*Loader-2026: the load was aborted because SQL Loader cannot continue.
    ********************Task Error Code In Loading**********************************************
    import java.lang.String
    import java.lang.Runtime as Runtime
    from jarray import array
    import java.io.File
    import os
    import re
    ctlfile = r"""E:/File/Med_CDR_File.ctl"""
    logfile = r"""E:/File/Med_CDR_File.log"""
    outfile = r"""E:/File/Med_CDR_File.out"""
    oracle_sid=''
    if len('')>0: oracle_sid = '@'+''
    loadcmd = r"""sqlldr 'test/<@=snpRef.getInfo("DEST_PASS") @>%s' control='%s' log='%s' > "%s" """ % (oracle_sid,ctlfile, logfile, outfile)
    rc = os.system(loadcmd)
    if rc <> 0 and rc <> 2:
         raise "Load Error", "See %s for details" % logfile
    # Init Vars
    nbIns = 0
    nbRej = 0
    nbNull = 0
    strprt = ""
    maxAllowedError = r"""0"""
    c = 0
    flag = 0
    # Open log file
    f = open(logfile, "r")
    try:
         lines = f.readlines()
         for line in lines:
              if line.rstrip().upper().endswith(r"""TEST.TC$_0MSC_SMS:""".upper()):
                   flag = 1
                   c = 0
              if flag == 1:
                   if c > 0 and c <= 4:
                        if c == 1 :
                             nbIns = int(re.findall("\d+", line)[0])
                        elif c == 2:
                             nbRej = int(re.findall("\d+", line)[0])
                        elif c == 4:
                             nbNull = int(re.findall("\d+", line)[0])
                             break
              c+=1
         strprt = "\n\tIns:\t%s\n\tReject:\t%s\n\tNullField:\t%s" % (nbIns, nbRej, nbNull)
    finally:
         f.close()
    # if some rows has been rejected due to invalide data, check KM option LOA_ERRORS
    if rc == 2:
         if nbRej > int(maxAllowedError):
              raise strprt
              break
    waiting
    Regards,
    Edited by: AMSI on Nov 10, 2012 1:40 AM

    Hi AMSI,
    Did you try to run only the interface? It might not work.
    Try executing your interface from within a package. A previous step should refresh / set the variable.
    Regards,
    Jerome Fr

  • Error while deleting the Temp File

    Please see the following results I have the temp_03.dbf in dba_temp Files but have no id in v$temp_space_header. So when I am trying to do the alter tablespace drop file its giving me error. Cant drop the file at this time. Any recommendations will highly be appreciated.
    select tablespace_name, FILE_NAME, FILE_ID from dba_temp_files;
    TABLESPACE_NAME FILE_NAME FILE_ID
    TEMP /crtp01/temp/temp_01.dbf 1
    TEMP /crtp01/temp/temp_02.dbf 2
    TEMP /crtp01/temp/temp_03.dbf 3
    TEMP /crtp01/temp/temp_04.dbf 4
    TEMP /crtp01/temp/temp_05.dbf 5
    TEMP /crtp01/temp/temp_06.dbf 6
    TEMP /crtp01/temp/temp_07.dbf 7
    7 rows selected.
    select TABLESPACE_NAME, FILE_ID from v$temp_space_header;
    TABLESPACE_NAME FILE_ID
    TEMP 6
    TEMP 7
    TEMP 1
    TEMP 2
    TEMP 4
    TEMP 5

    Use this command to delete tempfile.
    Not sure which one you used.
    sample,
    ALTER DATABASE TEMPFILE '/crtp01/temp/temp_07.dbf ' DROP INCLUDING DATAFILES;
    but have no id in v$temp_space_headerThere's ID in v$temp_space_header, right?
    All files under same 'TEMP' temporary tablespace
    select TABLESPACE_NAME, FILE_ID from v$temp_space_header;
    TABLESPACE_NAME FILE_ID
    TEMP 6
    TEMP 7
    TEMP 1
    TEMP 2
    TEMP 4
    TEMP 5                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • AAAAH!! phtoshop error causes deletion of the file!!

    hi guys.
    im using PS 8 and just today i started getting some errors (might be something regarding RAM. i dont remember the error message) that causes the file i was working on to get DELETED from my machine completely!
    i have many many crashes when i try to use the magic wand tool that causes PS to crash to desktop but this... this deleting file error is something i cant afford!
    anyone can tell me how i can stop these errors from happening?!
    i dont even want to think about what i might lose if this keeps happening.... i lost 2 files today that i had to recreate from scratch. god....

    The only time that I have encountered any issue with PS and files was with early USB externals. The problem was NOT with PS, but with read/write errors between the laptop and the externals. This was common in the early days of USB, and could still be around. This yielded corrupted files, and not deletions.
    For use of externals, I learned to Copy the Assets over to the internals, and work from there. When done, I would just Copy over those Assets to the externals for archiving.
    Otherwise, in several decades of using PS, I have never had an issue with any corrupted files on Save, and zero deletions. I agree with Chris - PS does not, and cannot Delete files.
    If you are having issues, I'd study your I/O sub-system, i.e. your HDD's, the controller type, free space, speed, etc., and look for issues there.
    Also, on a well-maintained machine, PS is virtually crash-proof. If you are getting crashes, something is wrong, and I would study the system very closely. This ARTICLE will give you tips on finding clues as to what is happening, when you get a crash. Be sure to follow ALL links in the error and warning messages. Your clues are likely in those. If all fails, be sure to follow the link at the bottom to The Case of the Unexplained. Though a bit long, it is entertaining and informative, plus it will give you a toolkit to use to troubleshoot.
    Good luck,
    Hunt

  • Following repeated crashing of Firefox 3.6.11, I was required to amend my profiles to correct a security error (I got an ssl error) by deleting cert8.db file. I have lost all my browsing history in the crash, how can I recover it?

    The problem originated from Talktalk's Assist & Go software interfering with my browser settings. This caused Firefox to repeatedly crash with message (see below)I then got error "ssl_error_ssl_disabled" when trying to access my webmail- I followed the help instructions and deleted the cert8.db file whcih allowed Firefox to start & me to access my webmail.
    But all the browsing history has disappeared, I had about 6 months prior to the crash, how can I recover it, is there a backup?

    The problem originated from Talktalk's Assist & Go software interfering with my browser settings. This caused Firefox to repeatedly crash with message (see below)I then got error "ssl_error_ssl_disabled" when trying to access my webmail- I followed the help instructions and deleted the cert8.db file whcih allowed Firefox to start & me to access my webmail.
    But all the browsing history has disappeared, I had about 6 months prior to the crash, how can I recover it, is there a backup?

  • Yosemite 10.10.1 will not allow me to copy multiple files to a NAS -error file in use, but other OS OK.

    I am running Mac OS 10.10.1 on a Mac Mini with 16G.
    I have a Buffalo NAS and wanted to copy files from one folder on the NAS  to another on the NAS.
    Under Yosemite I can only copy them one at a time. If I try to copy more than one I get an error message that the file is in use.
    Under SNS 10.6.3 (running under Parallels) I can easily copy a large number of files.
    Again under 10.10.1 I get the same problem when copying from my desktop to the NAS.
    The files are definitely not in use elsewhere and in any case if they were I wouldn't be able to copy one at a time.
    When I try to copy multiple files the OS creates greyed out icons of all the files to copy and then aborts when it actually tries to copy the first file.
    Any clues please, my current work around is to compress all the files to move, move the archive, expand the archive. This is not going to work for very large numbers of files - l'll be at it all day.
    Tony

    I have been unable to drag and drop large files, even onto the Desktop, let alone onto my NAS - I get the dragged files freezing in the middle of the screen or I get the 'unable to copy / file in use' error.
    Talking to Apple Support, they had me set up a new User, and then within that new account, the trouble went away. This pointed to the StartUp items being run in the original troublesome account,
    I have deleted all of my 3rd Party programs and then installed them one by one until the problem came back, and in my case (Macbook Air 5,2 running 10.10.3 Yosemite) I found it was DropBox causing the conflict. I have DropBox running in the Menu Bar (top of screen) and disabling sync (bottom left corner) stopped the file copy problem. Try disabling DropBox sync is file copying is failing?

  • PSE 10 Processing Multiple Files - Error

    Yesterday this was working; today it's not. When I try to process multiple files I get this error message:
    "Could not complete the Process Mulitple Files command because the disk is not available."
    I'm on a Mac - 10.6.8. The disk is not full.
    I am trying to convert Open TIF files to JPGS. And like I said, this was working for me yesterday.
    Here's what I've tried as far as troubleshooting:
    1. Going to your username>library>preferences and deleting:
    com.adobe.PhotoshopElements.plist
    Adobe Photoshop Elements 10 paths
    Adobe Photoshop Elements 10settings
    repair permissions and try again.
    2. restarting the editor while holding down command+shift+option, keeping the keys down till you see a window asking if you want to delete the settings file. I did.
    3. restarting the computer
    4. shortening the file names
    5. moving the destination file
    Still no success.  Any other suggestions out there that I may have missed?
    Thanks in advance for the help.
    ~Karen

    Can you please try shortening the containing folder name as well?
    Thanks
    Andaleeb

  • Error while deleting a file which is in a folder which inturn in workspace

    12:20:42.309  DELETE  (FAILED: Conflict [(pre||post)-condition failed: x:concurrency-lock-denied])  Hello.java   (C:\CFolder1\WSF1\WSF2\Dev\HelloWorld\Package\Hello.java)
    --- Problem summary: ---
    12:20:42.309  DELETE  (FAILED: Conflict [(pre||post)-condition failed: x:concurrency-lock-denied])  Hello.java   (C:\CFolder1\WSF1\WSF2\Dev\HelloWorld\Package\Hello.java)
    I am getting above error while deleting a file which is in a folder which inturn in workspace

    Here is the problem I have with deleting my folder. I had created a WD project TaxTool and and added the DC to my SC. There were obviously some checkedout activities. Being new to this, I deleted the project directly without checking in the activities. Now I have folder TaxTool/_comp with nothing underneath on the DTR server and on my client. I am unable to checkout TaxTool for delete but the checkout of _comp folder fails in NWDS with the following error:
    <b>EDIT  (FAILED: server response: Conflict [(pre||post)-condition failed: x:no-exclusivity-with-existing-checked-out-resources])  comp   (C:\JDI\JDIDEMO1\intelJDI_TEST\dev\inactive\DCs\intel.com\TaxTool\_comp\)</b>
    If I try the same from the DTR shell, I get this following error:
    <b>Unexpected problem occurred during executing command.Lockfile "C:\Documents and
    Settings\bvedamur\.dtr\.syncdbs\5b0d8b2110a7a29883734c0407462df8.syncdbM.lock" is already in use by another process.</b>
    I am the only user in the system (doing R&D) and I have tried Sync and Delete. Nothing works. Help appreciated.
    Thx
    Bhaskar

  • Why does iTunes create disk errors when deleting movie files?

    I use a Macbook Pro, OSX 10.7.5. When I delete movie file from my iTunes library I get disk errors. I need to option boot select the recovery disk and repair the disk.  Deleting a movie file I have placed on my desktop with finder does not create any errors.  Most of the movie files are created as .m4v movies. They all play just fine with my Apple TV. I have tried turning off the Apple TV and rebooting before I delee files but nothing seems to work.
    Any ideas?
    Lance

    If you let iTunes organise your media folders then that is the way it is. An option would be to change the Media Kind to TV Show which would gather them togther in one folder, but in a different part of the library.
    tt2

  • Error Deleting/Archiving processed files

    Hi all,
    I'm working with a File (xml) to Idoc scenario. I have configured Sender File Channel to read files and after that deleting . SAP XI can read the files (xml files) and send to my SAP R/3 system but I in communication channel monitoring I get a message "Could not delete file 'p:.xml' after processing".
    I have tried with archiving and I get a similar error, but in this case it makes the archiving twice (I get 2 files in the archiving directory) and it doesn´t delete the original file from the reading directory, so SAP XI is ever reading and archiving.
    Does anyone know any solution?
    Thanks.
    Antonio.

    Hi Antonio,
    can you check if those files have <b>read only</b> attributes?
    if so you cannot delete them from the directory ? (or archive )
    Regards,
    michal

  • How can I delete multiple files at a time from "Finder"

    I can't possible delete the thousands of junk files that showed up in Finder once I downloaded Maverick.  I can't delete more than one at a time now.  Why won't the highlighting stay in place on more than one file that I want to delete?

    How are you trying to select multiple files?
    What makes you think that "thousands of junk files [...] showed up in Finder once I downloaded Maverick" (or even installed it)?

  • Getting error while uploading multiple files in sharepoint hosted app in 2013 with REST API

    Hi All,
    In one of my tasks, I was struck with one issue, that is "While uploading multiple files into custom list with REST API".
    Iam trying to upload multiple files in library with REST calls for an APP development, my issue is if i wants to upload 4 image at once its storing only
    3 image file and further giving "Conflict" error". Below is the attached screenshot of exact error.
    Error within screenshot are : status Code : 409
    status Text :conflict
    For this operation i am uploading different files as an attachment to an list item, below is the code used for uploading multiple files.
    my code is
    function PerformUpload(listName, fileName, listItem, fileData)
        var urlOfAttachment="";
       // var itemId = listItem.get_id();
        urlOfAttachment = appWebUrl + "/_api/web/lists/GetByTitle('" + listName + "')/items(" + listItem + ")/AttachmentFiles/add(FileName='" + fileName + "')"
        // use the request executor (cross domain library) to perform the upload
        var reqExecutor = new SP.RequestExecutor(appWebUrl);
        reqExecutor.executeAsync({
            url: urlOfAttachment,
            method: "POST",
            headers: {
                "Accept": "application/json; odata=verbose",
                "X-RequestDigest": digest              
            contentType: "application/json;odata=verbose",
            binaryStringRequestBody: true,
            body: fileData,
            success: function (x, y, z) {
                alert("Success!");
            error: function (x, y, z) {
                alert(z);

    Hi,
    THis is common issue if your file size exceeds 
     upload a document of size more than 1mb. worksss well for kb files.
    https://social.technet.microsoft.com/Forums/office/en-US/b888ac78-eb4e-4653-b69d-1917c84cc777/getting-error-while-uploading-multiple-files-in-sharepoint-hosted-app-in-2013-with-rest-api?forum=sharepointdevelopment
    or try the below method
    https://social.technet.microsoft.com/Forums/office/en-US/40b0cb04-1fbb-4639-96f3-a95fe3bdbd78/upload-files-using-rest-api-in-sharepoint-2013?forum=sharepointdevelopment
    Please remember to click 'Mark as Answer' on the answer if it helps you

  • Attaching photos to Apple Mail - error when attaching multiple files

    Hello,
    My iPhoto just recently started giving me an error whenever I try to attach multiple files to Apple Mail. The error says:
    "Mail got an error: Can't get paragraph 8 of
    content of outgoing message id 321072192.
    Invalid index."
    The only option allowed is to cancel. When I look at my Apple Mail it has created a message with the first selected photo attached, but none of the other photos are there. Any ideas of how to correct this? Is this an email client issue?
    Thanks!

    Welcome to the Apple Discussions.
    This is a problem between iPhoto 4 and 10.5.
    The workaround is to use the Photo Browser on the new Message Window in Mail, just drag the pic over from there:
    Uploaded with plasq's Skitch!
    Regards
    TD

  • I have this following problem in Adobe Premiere Elements 11: Error of export: You don't have permissions to create or delete the output file.

    Hey guys,
    I have this following problem:
    When i export my movie to my desktop from premiere elements 11 it fails and says "Error of export: You are not permitted to create or delete the output file."
    This is the first time i had this problem.
    I have no ideas to solve this problem ... I don't found it on this page neither in the whole web -.-
    I look forward to get requests

    S
    QuickTime is a requirement for Premiere Elements (any version). Please download and install it so that we can continue this troubleshooting. Among other things, without QuickTime installed, you will not have QuickTime presets in Publish+Share and will not have available to you codecs supplied by that player.
    Please right click the Premiere Elements 11 desktop icon and apply Run As Administrator. Please review computer permissions..
    In the meanwhile, please reply to all the questions, including
    What is the description for your export choice and does it make a difference if your Export Save In location is the desktop or to Video Folder in Documents?
    What is a description of your computer resources?
    Please consider and supply details need to help us help you.
    We want you to succeed.
    Thank you.
    ATR

Maybe you are looking for