Interesting Music Vid Import Issue

Hey there,
My buddy does drum covers to songs and posts them on Youtube. I used tubekeeper.com to snag the HD-format MP4's off of the net. I have 5 total. They all imported into iTunes just fine. Only 1 of them has audio associated with it though. The files all play just fine in VLC. I tried to run them thru MPEG Streamclip, but the 4 with no audio in iTunes threw back an error saying its an unrecognized file type..? I've used MPEG Streamclip a TON with every file type I can think of and its never given me this error. Any idea whats going on?

It may have something to do with the codecs used which is something you have to look at since I do not have the videos in front of me. Movies have audio and video components which are then packaged into the single file you see. Codecs (coders-decoders; different ones for audio and video) are used to encode each component and they are then packaged (e.g. AVI, mp4). There are thousands of combinations and iTunes is only set up to decipher a handful (it can't even play Apple's own Quicktime movies). Streamclip can handle more, but again not all. VLC can handle many more but you'll still come across the occasional one that it can't. You've found something between VLC's and Streamclip's capabilities.
You can try installing the Perian set of codecs and see if that helps some.
Perian codecs for Quicktime - http://www.perian.org - plugins to add functionality to Quicktime for playing additional audio and video formats
Quicktime audio problems, Perian, VLC - http://discussions.apple.com/message.jspa?messageID=9013669 - read note about uninstalling prior DIVX support before installing Perian.
Media Info - http://mediainfo.sourceforge.net - to get details of codecs used in multimedia

Similar Messages

60 g 5th gen music vid questions...

HI
THANKS FOR TAKING THE TIME TO READ THIS. I HAVE NON ITUNES MUSIC VIDEOS CONVERTED TO PLAY ON MY IPOD NO PROBLEM THERE...CAN I MAKE MY IPOD PLAY VIDEOS BACK TO BACK WITHOUT STOPPING AND WAITING FOR ME TO SELECT A NEW ONE? 2ND QUESTION WHY CAN I IMPORT LIKE 97% OF MY MUSIC VID COLLECTION BUT A FEW WON'T TRANSFER. IT IS IN THE SAME MPEG-4 FORMAT BUT VERY FEW DON'T IMPORT? LASTLY ON MY IPOD IN VIDEO FOLDER/VIDEO PLAYLIST IT HAS MY SMART PLAYLISTS IN THERE BUT WHY DOES IT ALSO HAVE MUSIC FILES... THEY ARE NOT VIDS? HOW CAN I CHANGE THAT SO WHEN I GO TO VIDEOS ALL THE SELECTIONS ARE JUST VIDEOS ( I KNOW KINDA PICKY BUT I THINK THAT IS HOW IT SHOULD WORK)...
AGAIN THANKS SOOOOO MUCH FOR ANY SUPPORT FOR AN IPOD FAITHFUL

Sorry... Not looking for gapless playback... Just To be able to go to the next vid with out selecting it. Right now I have to back out of the current one and select another one. I cannot just use the next button or let it play the next vid by itself...

Help me, oh great Toonz! (Slow import issue - # bazillion!)

Toonz you seem to be the most knowledgeable about this slow import issue.
I am trying to import from music CDs to a brand new, out-of-the-box, Maxtor External Hard Drive (usb 2.0). Currently I have a Dell Dimension XPS T500 Pentium3 w 512MB Ram and also a newly installed Sony 52x optical drive. Yet I still suffer from import rates of 3.0 or less.
Here is my CD Diagnostic from iTunes (which is hogging my CPU, btw).
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Dell Computer Corporation XPST500
iTunes 6.0.4.2
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: RADEON 9200 PRO Family (Microsoft Corporation)\RADEON 9200 PRO Family (Microsoft Corporation
IDE\DiskWDCAC29100D___________________________J74OA30K, Bus Type ATA, Bus Address [1,0]
IDE\DiskWDCWD200BB-75CAA0_____________________16.06V16, Bus Type ATA, Bus Address [0,0]
USBSTOR\DiskMaxtor6L200R0_________BAH4, Bus Type USB
IDE\CdRomSONYCD-RW__CRX320EE____________________RYK3___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
E: SONY CD-RW CRX320EE, Rev RYK3
Audio CD in drive.
Found 6 songs on CD, playing time 66:34 on Audio CD.
Track 1, start time 00:02:33
Track 2, start time 19:49:35
Track 3, start time 26:25:28
Track 4, start time 37:23:48
Track 5, start time 48:29:23
Track 6, start time 57:47:15
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 52.
The drive CDRW speeds are: 52.
Help me Obi-wan Kenobi, your my only hope!
Thanks.
Windows XP

See if Slow Imports can help.
Good luck.

How do I get my music back from a computer which has been recently serviced. I am able to log into my itunes account but lost half of my library which was music I imported originally.

I need help. I recently had my cpu serviced by Geek Squad, They completely renamed the CPU and now all of the music I imported is gone. I dont even have my library anymore. I can usually click on itunes and play music from my library. Its all gone. I have authorized this "new" computer for my account but I still dont have my library. I even went in and deauthorized the computer under the old name. I am very frustrated, as i have some songs which were purchased on itunes on my phone but not all of the music that was imported from CDs. Most of which I got rid of once I imported them into my library. all I want is my entire library back. On my old iphone 3g, which I let my kids use, my entire library is there but on my 4gS, i only have the music which was purchased through itunes. I miss my songs and have no idea where to begin with this process.

Your music will only be where you put it.
It has always been very basic to always maintain a backup cop of your computer.
Certainly you did not have our computer serviced without making sure your backup copy was up to date.
In some countries you can redownload some content:
Downloading past purchases from the App Store, iBookstore, and ...

Interesting and an imporatant issue at sales order schedule line.

hi all,
interesting and an imporatant issue at sales order schedule line.
i created a sales order with 10 qty.and the system proposed a two schedule lines.
let's say to order created date is 27.11.2008.and the requested delivery date is 27.11.2008.
but the stock is not available today then the system proposed two more schedule lines apart from the 27.11.2008.so now there are three schedule lines like below.
schedule line date                      Material availabilyt date   delivery date
27.10.2008 with zero quantity.
28.10.2008 with 5 qty.                28.10.2008                     29.10.2008
02.10.2008 with 5 qty.                02.10.2008                     03.10.2008
now the delivery and pgi already for the schedule line 28.10.2008.
then when i run the availability check on 01.11.2008 system is over writing the material vailability date as today at the scheduleline number two.
now i can able to view only two schedule lines only.
schedule line date                      Material availabilyt date   delivery date
28.10.2008 with 5 qty.                01.11.2008                     29.10.2008
02.10.2008 with 5 qty.                01.11.2008                     02.11.2008
now my concern when we reschedule the avalability check it should notchange the Material availability date of the schedule line which i already delivered.
Regards,
sheshukumar

can any one repsond for this.....

All of the music I imported to my iTunes account on a different computer is gone. It is on my iPad, is there any way to put it back on my computer?

I recently got my computer back from Geek Squad and about three fourths of my iTunes library is gone. All of the music I imported directly to this computer, and all of the music I purchased is here, but most of my library is originally from a family computer. I transferred it to this computer, but since i got it back, iTunes says it can't locate it. We don't have the family computer anymore either.
I do have all the music on my iPad though. Is there any way to transfer it back to my computer?

Katy288 wrote:
It can't locate them, because they originated from a different computer.
This makes no sense. It doens't matter where they originated from.
If they were in iTunes on this computer and this backup is of this computer, they are from this computer.
Look in /My Music/iTunes/iTunes media/Music/ folder and see what is there?

Strange import issue .. no longer works in 2.6 or Beta 3

Strange import issue.
I use LR-2.6 everyday but have only played around with the LR-3 for a limited amount of time so the other day I decided check it out and tried to import a handful of RAW(canon) files on a SDxc-8g card via a USB card reader. I set it up to copy and convert to DNG, apply a few keywords and Metadata but when I tried it acted like it imported the first image and then froze. Card reader lights stopped blinking and just stayed on, program task bar doesn’t show any progress, not even for the first image. I then went to the folder that I was going to have the images copies to and it contained a file of the first image, but there is no indication that LR-3 even created it and it doesn’t show up in the catalog. When I tried to close out LR-3 is popped up the “in the middle of a task warning” so I just closed the program and tried it a couple more times to no avail.
So I though o well I will just open up LR-2.6 and import them from there, guess what now LR-2.6 does the exact same thing!!
I thought maybe my card reader was a POS but I was able to drag all the files to a new folder on my desktop and import them from there, nope. Tried rebooting a couple times, even opened a new catalog to test with, in both LR-2.6 and LR-3 and neither will work..
I am stumped any ideas?

Thank you for everyone's assistance
I actually figured out what the problem was, like most issues it comes back to operator error, it seem I had inadvertently chose a "rename file on import" template that I had set up to name the files based on a custom fill-in field in the Meta Data, I normally only used that template when I was exporting images that had been completely edited, so being these images were new imports that field was blank, hence it would import the first image and then do to " don't import subjected duplicates" being checked it would just stop the import process.

IMPORT issues: Works with iMovie 3 but not iMovie 6 ???

Okay, still trying to get my import issue resolved.
I have a SONY HDR-HC3 DVmini.
No problems with iMovie 3 on my Powerbook.
iMovie 6 on my MDD will let me control the camera, but the screen stays BLUE with no IMPORT.
My buddy thinks it might be a Quicktime issue.
He said to download Quicktime Pro, that might resolve this issue.
I can copy the iMovie 3 file to my machine with iMovie 6 and do the editing, just not the importing...
THANX

Hi
Can be so much.
Often Camera has to be connected to Charger/mains during Capture.
An majority is a faulthy - badly connected FW-Cable (USB don't work at all)
My list on this
*NO CAMERA or A/D-box*
Cable
• Sure that You use the FireWire - USB will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin FW one ?
• Test another FW-Cable very often the problem maker.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toogle in iMovie pref. Play-back via Camera (on<->off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
• Camera connected to "charger" (mains adaptor) - not just on battery
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK eg recording and playback to TV)
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minmum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited.
SoftWare
• Delete iMovie pref file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie 8 (7.1.?) ?
• iMovie HD 6 (6.0.4/3) ?
*Other ways to import Your miniDV tape*
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpfull insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About../More..
under Firewire.. what do you read..?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choise / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After uninstalling Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
*No Camera or bad import*
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that halps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconect the external drive before the mac can see the video camera.
Yours Bengt W

I have a MacBook Air w/ 64 GB. I have hours and hours of music/vids/etc. Is it possible to have an external drive specifically set-up for my iTunes? If so, what do I need to do? Thanks!

I have a MacBook Air w/ 64 GB. I have hours and hours of music/vids/etc. Is it possible to have an external drive specifically set-up for my iTunes? If so, what do I need to do? Thanks!

Yes, many people do just that. Copy your iTunes folder to the external drive. Once done, open iTunes with Option held down and select the new location of the library file.

Importing issues with Final Cut Pro X. Green flash and twitches while play back

Hello, I'm having some importing issues with Final Cut Pro X and I can't find any solution whatsoever. Perhaps my importing settings are wrong?
Anyways, I've done a lot of recordings on eye TV and HD PVR with some videos that are about 3 hours long. I exported them into H.264 files, which turns them into mpeg-4 files with AAC audio. Then I import them into final cut pro X and I notice it takes a long time for them to render the videos and I notice that there are some green screens and twitches while I play through the video.
Here is a screenshot of the green screen that I'm talking about:
[URL=http://imageshack.us/photo/my-images/688/screenshot20130409at338.png/][IMG]http://img688.imageshack.us/img688/4537/screenshot20130409at338.png[/IMG][/URL]
Could it be my 2 video graphics card that is causing this kind of issues? Or is there any solution to fix this?
In the past, I've used iMovie 09 and it worked out perfectly. However, the new iMovie 11 is terrible because it automatically optimzie my 3 hour long videos into making the importing process to (144 hours long to import). Is there any way to get iMovie 09 back or am I stuck on dealing with this Final Cut Pro X issues?
More information:
My Hauppauge HD PVR settings are set to custom. Video Constant Bit Rate, the average bit rate: 13.5 Mbps. The audio is AAC.
My project settings for video properties is set to custom, 720P HD Format, 1280 x 720 Resolution and 30P Rate. The audio and render properties is set to custom, audio channels is stereo, audio sample rate is 48kHz and the Render Format is Apple ProRes 422.
I export the video as a quicktime movie. The export setting is H.262.
The summary of the export is:
File type: Quicktime movie
Estimated size: 397GB
H.264, Width and height: 1280 x 720. Framte rate: 30 fps

My Hauppauge HD PVR settings are set to custom. Video Constant Bit Rate, the average bit rate: 13.5 Mbps. The audio is AAC.
My project settings for video properties is set to custom, 720P HD Format, 1280 x 720 Resolution and 30P Rate. The audio and render properties is set to custom, audio channels is stereo, audio sample rate is 48kHz and the Render Format is Apple ProRes 422.
I export the video as a quicktime movie. The export setting is H.262.
The summary of the export is:
File type: Quicktime movie
Estimated size: 397GB
H.264, Width and height: 1280 x 720. Framte rate: 30 fps

Import issue with Lightroom

I upgraded to LR5.2 2 weeks ago from 4.3. Install went fine, but I'm now having issues when importing my photos, Lightroom hangs partially through the import. The only choice I have then is to force quit the program, which then freezes my computer. Getting to be an invredibly frustrating exercise.
I have an iMac with OSX10.8.5 (Mountain Lion)
Lightroom 5.2
Importing & converting CR2 files (5DMkIII) to DNG.
Images being imported to an external hard drive.
Nothing has changed in my workflow or software except for the installation of LR5. I did read in some of the forums that there was import issues that appear to have been fixed with the latest release, however, whilst I DEFINTIELY have the latest release of LR5, this is still occurring. Any ideas? Another bug?
Cheers
Sarah

sure did. All permissions are admin & I'm it. I haven't tried DL via image capture - LR4 gets me to the same end goal, tis just rather onerous to have to muck around with this twice. Appreciate your taking the time on this

Duplicate Video Import Issue

Hello,
I am running PPRO CS6 (6.0.3) on Windows Vista
I am having a duplicate asset import issue. Let me explain...
I have a couple of Premiere Pro project files with multiple sequences in each. In each of the project files I have the same source video files imported as the some of the sequences in each of the project files reference the same source video file.
So here it was is happening...I have a project file with sequences 001-025 in them and I have have another project file with sequences 026-050. I have 25 sequences per project to keep the project sizes smaller and more manageable so my system doesn't choke.
Sequences 014 and 015 in the first project file both reference "Video01.avi" which is located on my external F: drive. I want to import sequences 027-030 from the second project file which both reference the same "Video01.avi" file on the same drive.
I know PPro is intelligent enough to know when importing assets from another project file that shares the same assets as the project you are importing into, it knows to only import the dependent assets which are not in the project file you are importing into. I have done this countless times and PPro has correctly only imported the assets it needed.
However for some reason when I am trying to import the above mentioned sequences from one project into another it is bringing in a duplicate copy of the source footage necessarily. I can't figure out why it is doing this. The sequences it is importing both reference the identical file on the same drive, etc. And I am using the "Import Selected Sequences" option.
Thank you,
Shane

I think I have solved my own issue. As stated above when I was trying to import sequences from another sequence it was brining in a dup copy of the same clip in the sequence. I was able to successfully have it not do that.
What I realized was happening is that even though the source footage video file is identical in each project file, when I opened it up the clip in the source monitor I had different IO points set for each version of the clip in each project. PPro I am assuming imported the second copy to preserve the IO points on the second version of the clip that was being imported.
I simply cleared each set of IO points on each reference of the clip in the project file and I was able to import the sequences I wanted without bringing in an additional copy of the source clip. So now I just have one copy of "Video1.avi" in my project file instead of multiple.
Hope this helps someone in the future who may be experiencing a similar issue.
Shane

Music XML Import & Export

I use Sibelius for composing scores and would love to see audition support music xml import to the midi sequencer for final production to audio instead of requesting native notation features within AA. At the same time on a related feature request, I would also like to see AA support vsti midi automation with curves(?!?), for the final sculpting tasks towards post-production audio. Any thoughts on this? Thanks!

As a long-time Finale user, I'd second this request. It would be an amazing way to import MIDI data into Audition.
Having said that, Audition's MIDI capabilities are still primitive enough to cause problems with XML import -- too many unanswered variables, perhaps. And this
i sounds
like a complicated feature to implement. But all in all, a great idea.
How about Music XML
i export
also, so our MIDI compositions made in Audition can be read into Sibelius or Finale for editing and printing?

How move music & vid to my other computer?

scenario: at MacWorld Expo i bought an iPod video; using my 15" AlPB i bought several tv shows from the ITMS and enjoyed watching them on the flight home. Now I want to consolidate that newly purchased video and a couple songs i bought on the PB, on my "main" computer, my desktop.
When I hooked the iPod vid up to the PB it downloaded onto the iPod the vids and about 400 songs that were on that computer; i've got about 1600 songs (mostly but not entirely duplicates of the 400) on the desktop 'puter. When I hooked the iPod up at home those 1600 songs replaced what WAS on the iPod.
How do i "merge" the two computers' songs and vids (there's a music vid already on the desktop computer, too) so that everything is on the desktop computer, and for ease of use, it's all in the same place on the PB, too?
thanks
terry

ok, i consolidated each library on its respective
computer. I then used target mode to mount the
powerbook on the desktop of the G5. I copied the
iTunes Music folder from the G5 to the powerbook.
That was incorrect. You should have:
1) Copied the files you want to add to any arbitrary folder on the destination machine.
2) file->addfolder_tolibrary, choosing the arbitrary folder.
3) Consolidate library, which will copy all files from your arbitrary folder to the default iTunes library folder.
4) Delete the arbitrary folder, since the files are now copied to the default iTunes library folder.
That's it. There's no way I know of to also merge all your ratings etc. if the new songs came from another pc... unless you hack and merge the 'iTunes Music Library.xml' file by hand.

I have new music I am adding to my itunes. My ipod has the existing music from my itunes. I want to delete the existing music from the ipod and only select the new music just imported into itunes be sync'd on to my ipod?

I have new music I am adding to my itunes. My ipod has the existing music from my itunes. I want to delete the existing music from the ipod and only select the new music just imported into itunes be sync'd on to my ipod?

Open itunes, connect ipod, select what you want to sync ( in the music tab) sync.

Interesting Music Vid Import Issue

Similar Messages

Maybe you are looking for