Interesting network setting, shouldnt conect but do!
Sorry, I cant get the images to post here but just happened to be in the network pane of system preferences when the airport signal cycled on and off and noticed something very interesting. When the signal cycled off and then back on, I noticed that the router address was gone and the IP address was not the range set by the router, yet, I had internet connectivity. Strange. If you want to see the image ( i took a screen shot of the network pane) or know a way to attach an image to these topics, let me know. Maybe this has something to do with this whole airport signal issue.
Roger,
Thats the strange thing about this. When I look at the airport signal menu after the cycle, it still shows my network, but with a different IP range and no router ip. Even if I was on another network, I would still need a router IP. Something really strange here. I just wish Apple would step up!
Similar Messages
-
I am having a similar problem with my new iPhone 5. I just bought it few days back but unable to use the internet. I am getting a message "not subscribed to a mobile data service". I have reset mobile network setting several times. But the problem doesn't go away.
agree m also having same problems and same notifications...
-
New router, set up fine, but can't connect (iPhone) to network
Hi everyone, I've done some reading hoping I'd come across something and not have to post what I'm sure is a redundant question, but here goes. I just got a new wireless router, a WRT110. I set it up and everything went perfectly, no issues. It's hardwired to my iMac, but my wife and I would like to use wireless for our iPhones and perhaps a laptop. So, to test it out, i got onto my iPhone. I found the network I had established so I thought everything would work smoothly. However, as soon as I entered my password, it said "Incorrect password for "network"" I went back and reviewed the text file that the setup put on my desktop and sure enough, the password I selected is indeed the one I'm entering, but it's not working. I thought maybe it would be a time thing, so I gave it about a half hour or so and still nothing. I'm entering the right password, so why can I not login? Kind of frustrating. Thanks for any help or tips.
Hi!
I have the same problem. My iPhone doesn't recognize my password. As you suggested, I change the security mode to Disabled and now, on my iPhone, I can see that my network is not locked but I can't access to the network. (''Unable to join the network''.
Can you help me please ? -
i have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me???
If Join was on then your home wi-fi must be set to Non-Broadcast. If you did not set this up (maybe your provider did) then you will need to find the Network Name they used, and any password they used. The SSID is Security Set ID and to see more try http://en.wikipedia.org/wiki/SSID . Basically it is the name used to identify your router/network. A lot of times the installer will leave it set as LinkSys, or Broadcom or whatever the manufacturer set it as for default. Your best bet is to get whoever installed it to walk you through how they set it up, giving you id's and passwords so you can get in. HOWEVER, if you are not comfortable with this (if you set security wrong, etc.) you would be well ahead of the game to hire a local computer tech (networking) to get this working for you. You can also contact the vendor of your router and get help (if it is still in warranty), or at least get copies of the manuals as pdf files. Sorry I can't give you more help, I hope this gives you an idea where to go from here to find more.
-
i cant download apps throgh wifi on my iphone however when i connect to cellular data it starts downloading. then what is wrong over wifi , i tried reset network setting but i didnt help
Definitely sounds like an issue with your Wi-Fi network. Do any other devices on the network have similar issues? Is it an issue only with downloading apps? You can check by trying to load a website in Safari.
I would try turning your Wi-Fi router off for 1 minute, and back on again.
After doing that, disconnect and re-join the Wi-Fi network on your iPhone and try downloading an app again. -
I just purchased the 2TB TC and set it up on bridge mode to my att verse which is connected via ethernet cable. The TC is continually blinking amber and an error message states that a wireless network cannot be found but the uverse is functioning great. The network name I assigned to the TC is also not appearing among available networks. How do I remedy this, please?
What OS on the computer you are using to setup the TC?
Did you turn on ipv6 for wireless to link-local... this is essential for network access now??
Try power cycling the network.. start up in correct order.. uverse.. 2min wait.. TC.. 2min wait.. computer.
No luck factory reset and start over. Use ethernet cable as well to the computer to help it.
No luck I can show you manual method. -
I had done the update agn & agn but the problem is still be there . I ask for repair with KLCC maxis centre (malaysia) , there ask me to pay around RM1000
I done the network setting reset also ....
Someone help me plzthe main discussion regarding this issue: https://discussions.apple.com/thread/4310121
-
My iphone 4s is saying NO SERVICE.I tried to put it on airplane mode,tried to reset the network setting and also tried to restore my phone but none of the above things worked.Do you guys have any idea what should i do now?
Hi sunnylordz,
Thanks for using Apple Support Communities. Based on what you stated, it sounds like you have no service on the iPhone. It looks like you have already done some troubleshooting. There is one step you did not mention trying that i think is worth trying.
If you see No Service in the status bar of your iPhone or iPad - Apple Support
Remove the SIM card. If the SIM card is damaged, worn, or bent, or if it's too big or small for the SIM tray, contact your carrier for a new one. Then reinsert the SIM card.
Cheers,
Mario -
hi..
i've got problem with my iphone 4s gsm factory unlocked it won't connect to a wifi. i tried to hold the power and home button even reset the network setting but ended with i am not even can turn the wifi on. does any body can helpme?See this: http://support.apple.com/kb/TS1559
If you carefully follow all of the instructions in this tip and none of them restore WiFi then your radio chip has failed and you need to get the phone replaced by Apple. -
every app on my ipod (2nd gen) which requires wifi connection doesn't work although the wifi mark is on. i did try restarting my ipod, resetting network setting, disconnect from wifi and reconnected it but non of them worked.
This may sound silly but try your date a time setting my ipod had the same problem and i had even checked the the date and time went all the way to the apple store for help and the genius guy just rest the date and time and it worked just fine.
-
i just change my carrier from Maxis to Celcom, however the carrier name on my home screen keep changing to my previous carrier which is Maxis. I aready reset the network setting but it still happened.
Yes, i put the new sim for the new carrier.
-
wi-fi has full bars, says i am conected but never puts a check by the name of network,i have reset settings and it still does the same thing. i dont think it is my wi-fi because my other computers are able to get on just fine. please help.
There are two ends to a wifi network. Try rebooting your router.
-
20 days back myself ported network from vodafone in to airtel. But in my iphone5 its still showing vodafone in only. Done reset network setting, reztore but no use, can u ppl suggest any way to display carrier name correctly, ios i m using is ios7
Call your local Apple store. Not sure how the phone system works in the UK, but here in the US there is a menu system that allows you to make an appointment. Or, you can go online to www.apple.com/retail, or you can use the Apple Store app and make an appointment there after selecting the particular store.
-
My Wi-Fi connection on my iMac drops frequently. The other computers in the house do not have this problem. If I go into the Network Preferences and choose my Network it connects immediately but it does not remember the setting and I must reselect my network frequently.
The iMac picks up a wireless signal from the back of the screen, so you would want to avoid having it close to a wall, or in a confined area where the wireless signal cannot easily reach the iMac's antenna.
We don't know how far the iMac is from your wireless router, or how many walls or other obstructions might be in the signal path that would limit the quality of signal that the iMac receives.
Nor do we know whether you might have a cordless phone near the iMac, or whether you may be using a wireless keyboard and/or mouse....all of which can interfere with the wireless signal.
Can you provide some more info on this? -
Personal hotspot has dissappeared from setting, I tried resetting my network setting but that didn't fix the problem
Have you tried to erase your drive and reinstall the OS - you should use recoery (hold Command + R keys while restarting). Since the items in the menu bar are part of the system, a clean reinstall of the system should take care of it.
As it is dangerous to post private information in a public forum, I will ask the hosts to remove it.
FWIW, we are all other users here - you are not addressing Apple.
Maybe you are looking for
-
I just updated my Note 3 to 4.4.2. Since then when I listen to music or make a call on my Bluetooth my music and calls 'studders' and has some type of 'drop-outs' during the music and calls. This was not the case prior to the update. Yes, I have powe
-
Hi Everyone, Well after almost 18 months of constant work, 2 versions of Pages and numerous backups, Thomas Strange 3 is finished. Sorry I can't say the real title yet the publisher still wants to keep it a mystery. Anyway, I have to say a big thanks
-
The Problem is as below: We have purchased an asset through PO in the previous year. Now we want to Cancel this PO. For canceling this PO the GR in that PO has to be reversed. When we are reversing the GR we are getting an error message "Asset has be
-
Voyager XI R 3.1 SP 3 Fp 3.2-- To show multiple dimensions in same workspac
Hi, We are creating a Voyager work space. The idea here is to show diiferent diemsions as free standing cells with drop down that shows all values of that particular dimension. This is done in XI R2 OLAP reports. Cross tab shows following data: Hea
-
MBP good for hardcore multitasking??
Ok so here is the scoop. I am a web developer who does some hardcore multitasking. Typically I have Photoshop, Dreamweaver, Safari, TextMate, Itunes, Mail, iChat, VNC and Flash open all at once. Once I get a new mac, I'll be running Parallels with Wi