Interesting site that definitely breaks the "rules"

i can't decide if i love it or hate it, but it's at least one
of the more creative things i've seen lately. thought i'd share....
http://www.afcook.co.uk/

I doubt it. But....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"joeq" <[email protected]> wrote in message
news:fvcfdu$6sb$[email protected]..
> perhaps. or, to give them the benefit of the doubt,
maybe they did so
> because
> they knew the rules but didn't care - as they were
well-tuned in to the
> mindset
> of their target demo.
>
>
>
quote:
Originally posted by:
Newsgroup User
> Maybe it broke the rules because they didn't know any
better?
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
> ==================
>
>
> "Nancy O" <[email protected]> wrote in
message
> news:fvaq34$c9f$[email protected]..
> > Oh good grief! At first I thought this was a joke.
But then I switched
> > off
> > the stylesheet (not much better that way either).
> >
> >
> > --Nancy O.
> > Alt-Web Design & Publishing
> > www.alt-web.com
> >
> >
> >
> >
> >
> > "joeq" <[email protected]> wrote
in message
> > news:fvap3r$bfo$[email protected]..
> >> i can't decide if i love it or hate it, but
it's at least one of the
> >> more
> > creative things i've seen lately. thought i'd
share....
> >>
> >>
http://www.afcook.co.uk/
> >>
> >>
> >
> >
>
>
>
>
>

Similar Messages

  • How to update SP2010 sites that are missing the Visual Upgrade options

    So, we are moving towards upgrading some SP 2010 sites that are currently using the old SP 2007 look and feel so that they have the new ribbon Visual Upgrade.
    For some reason, some of these sites do not have the Site Actions > Visual Upgrade option nor do they have the Site Actions > Site Settings > Visual Upgrade link.
    Does anyone know what can be done to make those available?
    Thank you.

    Even when I take a look at
    http://myfarm/sites/Support/dept1/_layouts/prjsetng.aspx?Source=http%3A%2F%2Fmyfarm%2Fsites%2FSupport%2Fdept1%2FPages%2Fdefault%2Easpx
    which is where the site actions > visual upgrade link should take the user, that page does not have the visual upgrade options on it.

  • How to loose a soccer game by breaking the rules all the time...

    Hi All,
    I have a requirement in which changes to Moving Average price ( MAP) needs to be send to another legacy system through custom MATMAS IDOC. Now when I make a change to MAP through MR21 or MM02 these changes are written in BDCP table and a change pointers are created and hence i am able to send them through IDOC. But when for a material the MAP changes through GR,GI Oor PO changes in such cases the MAP change being an automatic change it doesn't get captured in CDHDR and CDPOS table and hence no change pointers are created. I know CDDHR and CDPOS captures manual changes and not automatic changes. Could anyone please explain me in details how this problem can be resolved.
    Thanks ,
    Ameesha

    Thank you for your restraint, to help us enforce the rules.
    End of game. SDN wins

  • Was it GoLive or Dreamweaver...tool for laying out site that then creates the html files?

    I can't remember if it was Dreamweaver or Golive...
    I remember a tool that allowed me to layout a web
    site...graphically....I could create a index.html file...then
    about.html, contact.html, services.html....link the structure of
    the files together....such as all files are subordinate to
    index.html...then push OK somewhere and all the files would be
    created. Also you could print out the layout/structure of the
    website.
    Is there such a capability in CS3 DW? I am using Leopard on a
    MAC.
    Thanks, --bill

    > Is there such a capability in CS3 DW?
    No.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "bdaul" <[email protected]> wrote in message
    news:fgce2u$p2s$[email protected]..
    >I can't remember if it was Dreamweaver or Golive...
    >
    > I remember a tool that allowed me to layout a web
    site...graphically....I
    > could create a index.html file...then about.html,
    contact.html,
    > services.html....link the structure of the files
    together....such as all
    > files
    > are subordinate to index.html...then push OK somewhere
    and all the files
    > would
    > be created. Also you could print out the
    layout/structure of the website.
    >
    > Is there such a capability in CS3 DW? I am using Leopard
    on a MAC.
    >
    > Thanks, --bill
    >

  • Error while executing the rule session

    Hi, I am using Oracle Business Rules Engine 10.1.3.3.0.I am developing rules using XML Facts.I am using a complex type array schema and binding it to define XML facts.Earlier the depth of the schema is 1 and it worked fine,now our schema's depth is 2 and while binding this schema is also working fine.The sample structure of the present schema I am binding is
    <xsd:schema>
    <xsd:element name = 'ruleRepository' type = 'RuleRepositoryType'/>
    <xsd:complexType name='RuleRepositoryType'>
    <xsd:sequence>
    <xsd:element ='ruleFacts' type='RuleFactsType' minOccurs='0' maxOccurs='unbounded'/>
    </xsd:sequence>
    </xsd:complexType>
    <xsd:complexType name='RuleFactsType'>
    <xsd:sequence>
    <xsd:element name='fact1' type='xsd:string'/>
    <xsd:element name='fact2' type='xsd:string'/>
    <xsd:element name='fact3' type='xsd:string'/>
    <xsd:element name='fact4' type='Fact4' minOccurs='0' maxOccurs='unbounded'/>
    <xsd:sequence/>
    </xsd:complexType>
    <xsd:complexType name='Fact4'>
    <xsd:sequence>
    <xsd:element name='element1' type='xsd:string'/>
    <xsd:element name='element2' type='xsd:string'/>
    </xsd:sequence>
    </xsd:complexType>
    </xsd:schema>
    Earlier I have binded the similar schema as above but without 'fact4'.It went well and the rules were executing fine.
    However when I am trying to bind a similar schema like the above one, its binding fine but when executing from the BPEL Process,its giving errors like,
    "Error Caching Decision Services metadata,fact3 is undefined in DM,line6,Column 12",
    Please note that I am using fact1 and fact2 only for defining the rules , I am niether using fact3 which is a simple type nor fact4 which is a complex type.
    I have asserted Package.RuleRepositoryType in the definitions of the rule author.I have tried with different combinations of assertions but no one worked.
    The above error(
    "Error Caching Decision Services metadata,fact3 is undefined in DM,line6,Column 12") is coming for the first run of the decision service only,in the next runs its giving another error,which is like
    <2008-04-10 07:52:30,772> <ERROR> <default.collaxa.cube.services> <::> ORABPEL-36333
    <2008-04-10 07:52:30,773> <ERROR> <default.collaxa.cube.services> <::>
    <2008-04-10 07:52:30,773> <ERROR> <default.collaxa.cube.services> <::> Error while executing the rule session.
    <2008-04-10 07:52:30,773> <ERROR> <default.collaxa.cube.services> <::> The rule session {0} failed to execute.
    <2008-04-10 07:52:30,773> <ERROR> <default.collaxa.cube.services> <::> Check the underlying exception and correct the error. Contact oracle support if error is not fixable.
    <2008-04-10 07:52:30,773> <ERROR> <default.collaxa.cube.services> <::>
    <2008-04-10 07:52:30,773> <ERROR> <default.collaxa.cube.services> <::> at oracle.bpel.services.rules.rpi.oracle.OracleRuleSession.execute(OracleRuleSession.java:251)
    <2008-04-10 07:52:30,773> <ERROR> <default.collaxa.cube.services> <::> at oracle.bpel.services.rules.impl.DecisionServiceImpl.process(DecisionServiceImpl.java:1385)
    <2008-04-10 07:52:30,773> <ERROR> <default.collaxa.cube.services> <::> at oracle.bpel.services.rules.impl.DecisionServiceImpl.assertExecuteWatchStateless(DecisionServiceImpl.java:546)
    <2008-04-10 07:52:30,774> <ERROR> <default.collaxa.cube.services> <::> at oracle.bpel.services.rules.runtime.BookOrderDecisionSOAPBinding_Tie.invoke_assertExecuteWatchStateless(BookOrderDecisionSOAPBinding_Tie.java:162)
    <2008-04-10 07:52:30,774> <ERROR> <default.collaxa.cube.services> <::> at oracle.bpel.services.rules.runtime.BookOrderDecisionSOAPBinding_Tie.processingHook(BookOrderDecisionSOAPBinding_Tie.java:457)
    <2008-04-10 07:52:30,774> <ERROR> <default.collaxa.cube.services> <::> at oracle.j2ee.ws.server.StreamingHandler.handle(StreamingHandler.java:297)
    <2008-04-10 07:52:30,774> <ERROR> <default.collaxa.cube.services> <::> at oracle.j2ee.ws.server.JAXRPCProcessor.doEndpointProcessing(JAXRPCProcessor.java:413)
    <2008-04-10 07:52:30,783> <ERROR> <default.collaxa.cube.services> <::> at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:349)
    <2008-04-10 07:52:30,783> <ERROR> <default.collaxa.cube.services> <::> at oracle.j2ee.ws.server.JAXRPCProcessor.doRequestProcessing(JAXRPCProcessor.java:277)
    <2008-04-10 07:52:30,783> <ERROR> <default.collaxa.cube.services> <::> at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:114)
    <2008-04-10 07:52:30,783> <ERROR> <default.collaxa.cube.services> <::> at oracle.j2ee.ws.server.JAXRPCProcessor.doService(JAXRPCProcessor.java:134)
    <2008-04-10 07:52:30,783> <ERROR> <default.collaxa.cube.services> <::> at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:177)
    <2008-04-10 07:52:30,783> <ERROR> <default.collaxa.cube.services> <::> at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
    <2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    <2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
    <2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
    <2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
    <2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
    <2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
    <2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
    <2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
    <2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    <2008-04-10 07:52:30,801> <ERROR> <default.collaxa.cube.services> <::> at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
    <2008-04-10 07:52:30,802> <ERROR> <default.collaxa.cube.services> <::> at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
    <2008-04-10 07:52:30,802> <ERROR> <default.collaxa.cube.services> <::> at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
    <2008-04-10 07:52:30,802> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
    <2008-04-10 07:52:30,802> <ERROR> <default.collaxa.cube.services> <::> at java.lang.Thread.run(Thread.java:595)
    <2008-04-10 07:52:30,802> <ERROR> <default.collaxa.cube.services> <::> Caused by: java.lang.NullPointerException
    <2008-04-10 07:52:30,802> <ERROR> <default.collaxa.cube.services> <::> at oracle.bpel.services.rules.rpi.oracle.RuleSessionPool.getSession(RuleSessionPool.java:463)
    <2008-04-10 07:52:30,802> <ERROR> <default.collaxa.cube.services> <::> at oracle.bpel.services.rules.rpi.oracle.OracleRuleSession.execute(OracleRuleSession.java:224)
    <2008-04-10 07:52:30,802> <ERROR> <default.collaxa.cube.services> <::> ... 26 more
    <2008-04-10 07:52:30,803> <ERROR> <oracle.bpel.services> <::>
    java.lang.NullPointerException
    at oracle.bpel.services.rules.rpi.oracle.RuleSessionPool.getSession(RuleSessionPool.java:463)
    at oracle.bpel.services.rules.rpi.oracle.OracleRuleSession.execute(OracleRuleSession.java:224)
    at oracle.bpel.services.rules.impl.DecisionServiceImpl.process(DecisionServiceImpl.java:1385)
    at oracle.bpel.services.rules.impl.DecisionServiceImpl.assertExecuteWatchStateless(DecisionServiceImpl.java:546)
    at oracle.bpel.services.rules.runtime.BookOrderDecisionSOAPBinding_Tie.invoke_assertExecuteWatchStateless(BookOrderDecisionSOAPBinding_Tie.java:162)
    at oracle.bpel.services.rules.runtime.BookOrderDecisionSOAPBinding_Tie.processingHook(BookOrderDecisionSOAPBinding_Tie.java:457)
    at oracle.j2ee.ws.server.StreamingHandler.handle(StreamingHandler.java:297)
    at oracle.j2ee.ws.server.JAXRPCProcessor.doEndpointProcessing(JAXRPCProcessor.java:413)
    at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:349)
    at oracle.j2ee.ws.server.JAXRPCProcessor.doRequestProcessing(JAXRPCProcessor.java:277)
    at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:114)
    at oracle.j2ee.ws.server.JAXRPCProcessor.doService(JAXRPCProcessor.java:134)
    at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:177)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
    at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
    at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
    at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
    at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
    at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
    at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
    at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
    at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
    at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
    at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
    at java.lang.Thread.run(Thread.java:595)
    08/04/10 07:52:30 pFaultMessage is org.collaxa.thirdparty.apache.wsif.base.WSIFDefaultMessage@6e0e5f name:operationErroredFault
    08/04/10 07:52:30 QName string is operationErroredFault
    where 'BookOrderDecision' is the name of the decision service I am using in BPEL.
    I dont understand why I am getting two errors for the same BPEL Process.
    Kindly help me in this problem.I am stuck with this for about a week but could not get to the solution.
    Thanks in advance.
    Regards,
    Venkat.

    Hi Venkat,
    Whenever you do schema changes, you need to go through the cycle of
    re-importing the XML schema in the rule repository, re-create the decision
    service partnerlink, re-deploy the decision service.
    I suspect you have maybe imported the entire XML fact type model (with fact3 and
    fact4) instead of just fact1 and fact2 (might want to check in rule author).
    So even if you don't use fact3 and fact4 in decision service, they are part of the rules
    datamodel.
    Regards,
    Ralf

  • How can I get the ruler tool to show length in inches?

    This doc says the units the ruler tool shows length in are changed using preferences:
    http://helpx.adobe.com/en/photoshop/using/positioning-ruler-tool.html
    This document says the ruler tool always uses pixels unless you change measurement scale on a per image basis:
    http://livedocs.adobe.com/en_US/Photoshop//10.0/help.html?content=WS3D3EF585-502B-49d2-85F F-537E9DC25C21.html
    So far, the latter seems to be the case, but that's horribly inconvenient. Is there something I'm doing wrong or is there some setting somewhere that will make the ruler tool display measurement length in inches (or what ever I set in preferences)?
    Note that I am not talking about the units shown at the top and left side when the ruler is in view, I'm talking about the ruler tool's position and length data, whether or not the ruler is in view.

    Trevor,
    Unfortunately, that only changes the ruler units, not the mouse coordinates displayed when taking measurements using the ruler tool.
    gener7 nailed it though.
    rgr

  • Site that automatically resizes images based on browser size

    Hi. I need to make a site that automatically adjusts the size of the images based on the browser size, but keeps the image quality. Does anyone know how to do this without using flash?
    I basically want the site to perform like [http://www.shotview.com/|http://www.shotview.com/] . Thanks for your help.

    first time accessing website get screen size info using javascript and then redirect to next page and store screen size info into session. then, when requesting pictures from browser use custom servlet, mapped to image extension, that renders images to different resolution.

  • Copying formatting from conditional formatting without the rules

    I tend to use a lot of conditional formatting in my spreadsheets. Unfortunately, this leads to two problems:
         1) I need more rules than are allowed (this seems to be related to the height of my screen... probably because the dialog box doesn't have a scrollbar)
         2) This really, really slows things down, especially when combined with cell references, and particularly when I'm trying to rearrange cells (as far as I can see Numbers has a tendency to freeze and/or blank out the table I'm working on)
    The easiest way I can see out of my predicament would be to somehow remove the conditional formatting rules while keeping the actual formatting... like copy-and-pasting values instead of the actual cells (with intact formulae). Is this possible? And if possible, how would I go about doing it?
    Thanks in advance!

    Up to 15 rules can be set for conditional formating of a cell.
    1)
    Considering that the usual purpose of conditional formatting is to flag 'unusual' values, and to make the 'condition' instantly visible and recognizable, that seems an over generous number. If a cell or group of cells on your table 'needs' more than 15 possible formats (the base format and 15 others based on rules), perhaps what's needed is a re-thinking of why that many are needed, and whether having that many formats adequately answers that 'why'.
    If you really do need that many, you can set then, even if your display height is filled with fewer than that. Additional rules may be inserted after any existing rule, not just the last one. note, though, that the conditions are evaluated in the order the rules are listed, from top to bottom, and the format is set by the first rule encountered whose condition is met.
    2)
    Not surprising. Numbers recalculates the entire table each time a value in the table is changed. That calculation includes through each list of conditional formatting rules until a match is found (or the end of the list is reached), and includes setting the new format for each affected cell.
    3)
    Not that I'm aware of. The base format of the cell may be copied (option-command-C) and pasted elsewhere (option-command-V), and that pair of operations will include any conditional format rules that had been set for the original cell.
    But conditional formatting is just that—a set of rules that applies a set of attributes to a cell when a specific condition is met. The applied format exists only when the condition is met, and can't be copied except by copying the rule—actually the whole set of rules for that cell—which puts you no further ahead.
    3a) You could, of course, change the base format of the cell to match the colour and style applied by the conditional rule, then clear the conditional format rules for that cell or set of cells. That would 'remove the rules while keeping the (applied) formatting', and would leave the formulas intact. seems to me a game not worth the candle, though.
    Regards,
    Barry

  • Why a site that has follow content disable can be follow from my site

    Hi, this is my question.
    I have a site where Follow Content feature is deactivated, so, the follow icon doesn't appear.
    Now, If I search the site from MySite, I can find the site, click on the elipsis and click on Follow, so, if the site has this feature disable, why can I follow the site?

    Hi Javi,
    According to your description, my understanding is that after you disable Following Content feature for a site, and you could also follow the site via Hover Panel Follow button in search result.
    As your description, I could reproduce this issue.
    And also I found that :
    I searched some documents in the site that I have diabled Following Content feature, the Follow button in the hover panel also displayed. If I clicked it, nothing happened.
    Go to Search Center, disable the Following Content feature. Then seach another site that I enabled the feature, the Follow button in hover panel also displayed. If I clicked it, nothing happened.
    It seems that the Following Content feature work for the current site Follow button. If the feature is enabled, the button can work normally. If the feature is disabled, the button in search result hover panel will have no response.
    So, if you don’t want users to follow sites in seach center, please disable the Following Content feature in the Search Center.
    Best Regards,
    Wendy
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Wendy Li
    TechNet Community Support

  • Drop the Rules of one table from existing bi directional replication setup

    Hi All,
    I have one small question on bi directional replication setup, Its regarding table add in existing replication setup.
    What happened ,When we add a new table to existing replication setup if any reason table is not replicating between two database even we are not getting
    any error in dba_apply_error ,then we have to remove the rules for that particular table and setup again. Some time what happened we got error "queue has
    errors" i dont know the ORA number. But in that case what happened Apply process ABORETED and when we try to start the process it gives same error
    ("Queue has errors" ) and ABORTED again.
    then on metalink for doc id 203225.1 .we have remove the whole replication Manually and setup again. It's horriable....
    Could you please help that before drop the rules for particular table from exisitng bi directional replication setup then wht should we do ?
    Do we need to unscheduled the propagation process and then drop the rules becuase i read on metalink that reason behind the error ,queue has errors
    "negative rules drops while propagation process using the same rule set" .
    Please Suggest!!!!!!!!!!
    Many Thanks

    How huge those tables?. If those are small tables use Oracle MINUS function to get the defference records.

  • Youtube works but other sites that play videos dont?

    I can watch videos on youtube but when I go on other sites that have videos, the videos dont play? I have java, flashplayer, and shockwave up to date as well

    OK, I used Firefox to play the videos - let me try Safari: yep. works in Safari as well. Oddly enough, in Chrome I get the following dialog box:
    That's nothing, that I know of, that I have installed in Firefox or Safari. I suspect that it's because Chrome uses proprietary Flash emulation.
    If I were you, I would go the the site and click on the video whilst holding down the control key - you should get a JW video plug in installation item at the top. Try installing that and see if you can play the videos,
    Clinton

  • How can we know that the Rule is Generated or Not?

    Hi,,
    After creating the Risk , its suggested to click on Generate Rules Button to Generate the Risk.
    But my question is that how we can know whether the risk is already generated or not..??
    Any table or any change history for this.
    As I can see even after generating the Rule the last update date for the risk is still the same.
    Someone please help me !

    Hi,
    Rule ID numbers are just identifiers for different combinations in same risk. It is just serial number assigned to the combination.
    Example:
    Risk: RISK01
    Function: FUNC01                         Function: FUNC02
    Action:      ZU01                              Action:     XU01
                     ZU02                                              XU02
    Rule ID: 0001 for ZU01 and XU01
    Rule ID: 0002 for ZU01 and XU02
    Rule ID: 0003 for ZU02 and XU01
    Rule ID: 0004 for ZU02 and XU02
    But if you remove action ZU02 and XU01 in your update
    Remaining
    Action:
    ZU01                        
    Action:
    XU02
    Rule ID: 0001 for ZU01 and XU02
    So it will just update the respective risk with same rule id assignment to new combination.
    To achieve more clarity try to build one risk in you system.
    You can definitely go into the risk to see if the new rule generated has changes reflected as per update or not. Try this all with example so you would have clarity.
    BR,
    Mangesh

  • How to finish with the sites that open aleatory on safari

    how to finish with the sites that open aleatory on safari?

    There is no need to download anything to solve this problem. You may have installed the "VSearch" trojan, perhaps under a different name. Remove it as follows.
    Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
    Back up all data before proceeding.
    Step 1
    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Extensions
    Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
    Reset the home page and default search engine in all the browsers, if it was changed.
    Step 2
    Triple-click anywhere in the line below on this page to select it:
    /Library/LaunchAgents/com.vsearch.agent.plist
    Right-click or control-click the line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
    Repeat with each of these lines:
    /Library/LaunchDaemons/com.vsearch.daemon.plist
    /Library/LaunchDaemons/com.vsearch.helper.plist
    /Library/LaunchDaemons/Jack.plist
    Restart the computer and empty the Trash. Then delete the following items in the same way:
    /Library/Application Support/VSearch
    /Library/PrivilegedHelperTools/Jack
    /System/Library/Frameworks/VSearch.framework
    ~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
    Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
    This trojan is distributed on illegal websites that traffic in pirated content. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
    You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that this Internet criminal has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • How do I install firefox on my android when I click on the download link it goes to a site that cannot be completed by my phone? LG Optimus

    When I click on the orange download for android button, it takes me to a site that is not able to be opened. An error message pops up. I prefer Firefox to the browser that came with the phone, but it does not show up at all in the Android Market.

    Sorry, Firefox is not available for the Sprint LG Optimus. For details, see https://wiki.mozilla.org/Mobile/Platforms/Android#System_Requirements

  • I am unable to see text after clicking on a pdf download.I just get a mid grey screen .I can send the pdf to my blackberry and see it -so the file is ok .I recently was at an official site that gave me an Adobe down load /update .Help please .

    Why am I suddenly unable to see pdf (on iMac) when I click on them ?There is is just a mid grey blank screen .I have sent pdf to my Blackb and I can read it there ,so the file is OK .I recently tried to down load a recent version of Adobe reader from a government site -could this be the cause?If so ,how do I uninstall it ?

    Back up all data.
    Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
    /Library/Internet Plug-ins
    In the Finder, select
    Go ▹ Go to Folder
    from the menu bar, or press the key combination shift-command-G. Paste (command-V) into the text box that opens, then press return.
    From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
    I've seen an unconfirmed report that the "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you might need to remove it as well, if applicable.
    If you still have the issue, repeat with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Maybe you are looking for

  • String Literal Too Long - error?

    I'm using a CLOB datatype but via an ODBC connection I'm given an error when I insert a value larger than 4000 chars: ODBC Error Code = S1000 (General error) [Oracle][ODBC][Ora]ORA-01704: string literal too long. SQL: insert into TEST2 (ARTICLE,UUID)

  • ITunes Media on external drive and moved to new PC laptop

    Environment: Dell PC laptop, Window 7 32-bit, iTunes 12.1.1.4 I have all of my iTunes Media on an external hard-disk drive. I want to keep it on that drive. I have a new laptop and have connected the external drive to it. I have installed iTunes on t

  • After Effects CC Crashing Immediately After Splash Screen?

    Hey guys, installed cretive cloud recently with a full licence but most of the programs seem to crash straight away after the splash screen.  After Effects, Premier, Photoshop and Media Encoder all seem to do this.  Tried signing in, resigning in, un

  • Jdbc-rfc scenario

    Hi..All, We are doing JDBC-RFC synchronous scenario using BPM, we are getting (Req & Res) data in to SXMB_MONI perfectly, the data is not updating into the Database Table, client wants to see the data in the DB only. how can i get the data in to DB T

  • Creating or updating a java.sql.array object

    I've created an oracle object table which contains a nested table. I've published these types using JPublisher and can extract an object from the table and read the data both the object and the nested table. (The nested table is typed within the java