Interface between TestStand and Clearcase base project

I would like to interface TestStand 3.5 with clearcase but in my company we only use clearcase base project whereas TestStand requires UCM base project.
What can I do to fix this issue ?

Hi,
I'm afraid but there is no workaround to achieve what you want to do.
You can use Teststand and get Source Code Control menu and features from Clearcase.
Have a look on the folklowing link:
http://digital.ni.com/public.nsf/allkb/E5763AD50D2​9E44286256CEC0055552F?OpenDocument
Omar. NI

Similar Messages

  • Interface between WM and SD

    Hi,
    Is there anybody who can give me the details of the interface between WM and SD through shipping module?
    It would be nice to have few info about WM /PP and WM/QM.
    Thank you in advance.

    Hi,
    The interface is mainly through the LEWM movement type configuration. You need to define the Interim storage type and movement types required to sales process prior to that.
    After you are done with the above settings, then you can configure for the 2 step picking. If you need it.
    Thanks,
    Mono

  • IDOC Interface between CO and BW

    Hi Gurus
    I am just looking for documents about all interfaces between CO and BW/BI. Can any body supply me these??
    Thanks in advance
    SIM

    Hi Joe-
    There are several How To guides that provide detailed instructions on how to automate transactional and master data loads from NW BW into BPC.  Please check out the following guides:
    [How to Migrate Transactional Data|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0427318-5ffb-2b10-9cac-96ec44c73c11]
    and
    [How to Automate Master Data Loads|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00380440-010b-2c10-70a1-e0b431255827]
    Regards,
    Sheldon

  • Interface between paravision and labview

    Hi,
    Does any one here who can help or give some idea how to make an interface between paravision and labview software???I need to acquire captured MRI image from paravision and store it to Labview.
    I would appreciate for any kind of assistance.
    Kind Regards,
    Jasim

    Hi Jasim,
    Could I get a little more information about how you are importing the MRI image into LabVIEW?
    1) How are you getting the MRI image into LabVIEW?
    2) What image format will the image be in?
    3) What will you be doing to the image once it is in LabVIEW?
    Best Regards,
    Bill
    Bill E. | Applications Engineer | National Instruments

  • Interface between sockmod and udp

    Hi,
    where can find info on interface between sockmod and udp stream modules. Iam specifically looking for how sockmod and udp/tcp modules inform each other of the destination ip/port numbers, source port number etc... any help would be greatly appreciated.
    Thanks,
    Surya

    Hi,
    In our case we are using
    IDOC-XI--SOAP ( For all Outbound scenarios)
    In this case ask abt wsdl files for SOAP Structure
    HTTPXI--IDOC ( For all Inbound scenarios)
    In this case POS will directly post the message to intergration server direcly by using parameters like namespace , IS details
    Regards
    Seshagiri

  • Interface between Legacy and SAP for Equipment Master

    Hello
    I got a requirement where I need to develop a interface between legacy system and R/3 system for Equipment Master Data update in R/3. I am thinking of getting a Idoc file from Legacy and then update the changes or any new creation of Equipments in R/3. I found a standard BAPI for this BAPI_EQUIPMENT_CREATE/CHANGE. This BAPI use a strcture BAPI_ITOB for data record of IDoc. But I got more data from legacy except what we have in BAPI_ITOB. I got Partner Data, Classification data also for Equipments. I am thinking of copying the BAPI to a Z function module and modify the Idoc structure , message type and all to capture all the data and then do a update in same way as standard transaction IE01(Equipment Create) is doing in Batch Input. Do you think if there is any better way of doing this? I am not used to transaction BAPI . just wondering if we Can use that in someway to include our modification?
    Thanks
    Harkamal

    20,000 is on quite higher side for IDOC.
    IBIP help doc says it needs 2 Kbyte for each record, i.e. 40 Mb for 20,000 rec. that should be ok. Since it has structures for Partner & classification data , I don't think u need to modify the BAPI.
    Transaction IE01 - Create equipment
    Transaction IE02 - Change equipment
    Structure - IBIPEQUI Equipment record
                     |->    IBIPNSTA     New status profile if necessary
                     |->>   IBIPSTAT     User status records
                     |->>   IBIPDOCU     Doc. from Doc. management system
                     |->>   IBIPPART     Partner details (comment below)
                     |-->>  IBIPTEXT     (see comment below)
                              for long text:          TEXT_MARK = " " empty
                              for internal comment:   TEXT_MARK = "1"
                     |-->>  IBIPCLAS    Classification record (eqpmt class)
                         |-->> IBIPFEAT     Classification characteristics,
                                               ie. features for the class
                     |-->>  IBIPBDCD     see below (from screen 102)

  • Block Demand Depend Interfaces between ECC and SCM

    Hello All.
    Is there a way to block only interfaces of Dependent Demand between ECC and SCM.
    I need to do this because ECC writes over my plan in SCM.
    Thanks and Best Regards

    Hello PrasunM
    For example:
    When you create an Order on finished material, SCM using PP method "3 - Cover Ind. Requ." creates DepReq on raw material.
    SCM using CIF sends PlOrd, PrdOrd and DepReq to ECC. I want send only PlOrd and PrdOrd, DepReq i only need in SCM side.
    Best Regards.

  • Docs about Interfaces between CO and BW/BI

    Hi all Gurus,
    I am just looking for documents about Interfaces between FI/CO and BW/BI. Can any body provide me the required documents. It is very urgent....  [email protected]
    Thanks in advance
    SIM
    Edited by: SIM on Feb 22, 2008 12:19 PM

    Hi
    You are right. I meant the interfaces between FI/CO and BW/BI. Namely how do we build the Interfaces such as IDOC and other interfaces between them. I need practice oriented docs with all steps towards building interfaces.
    Thanks
    SIM

  • Difference between save and publish on project professional 2013

    Dear Barbara
    What's difference between save and/or publish tasks from project professional 2013 onto project server 2013 integrated with TFS?
    For me its the same, if you exclude the integration with TFS in this scenario, that demands publishing, the tasks will be saved in project server anyway.
    Its that right? Thank you.
    Adauto

    hi Adauto,
    As a project owner when you create project plan from PWA or from Project Professional Once you save it means it will go to draft database and will be available to you in the server but you can not see it onto Project center.
    Once you Click on Publish then  project get publish and sits in publish database at the same time it will sync reporting database too. Once project get Publish then only all the team member who are associated with project will be able to see the project
    in project center including you .
    Also Users who are having either same RBS assigned to them or heigher to you will be able to see the project onto the project center.
    Also All the resource will get notified and task assignment will be assigned to team members.
    This is a same case for Project server with TFS integration and normal project server without TFS integration
    Main Usability of Save is :
    As a Project owner when you start Project scheduling you take time to finish it so everyday you can save it so that next day you can resume your work but in the middle of the scheduling work you wont want to show the data to your organization until- unless
    you give it final touch .Once you complete it then only publish it so that it would be available to team members.
    kirtesh
    kirtesh

  • PE2 - What's the difference between "cut" and "clear" in Project Assets?

    When removing items from the Project Assets area, what's the difference between "cut" and "clear"?
    Also I believe "delete" is an option at times, but I couldn't replicate it.

    Cut should Delete, but transfer that Clip to the Clipboard, where Clear will just Delete it completely - no transfer to Clipboard.
    That can be tested by doing a Cut, then move the CTI (Current Timeline Indicator) to the end of the Timeline, and hit Ctrl+V (Paste). That Deleted Clip should appear after the CTI.
    Then, clear (or choose a different Clip) the Clipboard, and try Clear. It should not Paste the Clip into the Timeline.
    Good luck,
    Hunt

  • Interface between ABAP and Excel-report

    Hi anyone!
    I need to implement a BAdI (CRM_MKTTG_SEG_MEM_EX) for displaying an aggregated BW field in the CRM Segment Builder. However my programmer knows little about the interface between ABAP an Excel. He therefore struggles with the programming. Have anyone of you any suggestions for how he can call a field in a query. Has anyone used this BAdI for the same purpose?
    Thanks, Camilla

    Hello Camilla,
    i think you should ask your question in a generic form in the BW forum. Ask them for access to a Query via RFC.
    Regards
    Gregor

  • Interface between XI and BIZTalk

    Hi Guys,
    Can any help me here In Middleware 
    1. i need some INputs between XI and BIztalk
    like what are XI Futures and BIZTAlk
    2. WHat sort of Adapter need in XI to make a Connectivity between XI and  BIZTALK.
    Advance thanks..
    Thanks
    Raj

    Hi,
    Please check this two documents:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/a73e8127-0a01-0010-b19f-f72ee1c2403c
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/107c7a27-0a01-0010-be82-92347921ae03
    Regards,
    Wojciech

  • Interface between Labmax and Labview

    Hi all,
    I am trying to control a laser energy meter, Labmax-top, with labview using labview drivers provided by the meter’s manufacturer (coherent). Once running the labview driver an error message appears saying that the sensor index cannot be found. According to the manual, the sensor index is a number between 1 and 127 and is automatically set by the system.
    Does anyone know how to set this manually? or any experience with these kind of problem?
    Thanks

    I am not familiar with this system at all, but in the worst case your LabVIEW program could just iterate over all possible sensor numbers until it no longer generates an error....
    LabVIEW Champion . Do more with less code and in less time .

  • Interface between C++ and labview

    I have decided a project that consists of C++ and Labview. C++ is used
    as the input to labview. However, i don't know how to use C++ to
    control the labview. Can C++ control the labview directly? and how ?
    or I have to buy another program or hardware to be interface?
    Sent via Deja.com http://www.deja.com/
    Share what you know. Learn what you don't.

    ActiveX and TCP/IP are both good choices for high-level communication
    between Windows applications. LabVIEW's VI Server, introduced in version
    5.0, gives you tremendous power to control LabVIEW programmatically and
    exposes it to the programmer via either ActiveX or TCP/IP.
    For a very nice example that shows how to call a LabVIEW VI with arguments
    passed from the C++ environment, then bring the resulting data from
    LabVIEW back to C++, check out the following example from NI's site:
    http://digital.natinst.com/explprog.nsf/websearch/6960cee3bf3d8c30862565da0078ef30?OpenDocument
    If the URL doesn't work for you, just go to NI's Example Programs Database
    (http://www.natinst.com/support/epd/) and search for "labview and c++".
    Regards,
    John Lum
    National Instruments
    Matthew
    Ho wrote:
    > I have decided a project that consists of C++ and Labview. C++ is used
    > as the input to labview. However, i don't know how to use C++ to
    > control the labview. Can C++ control the labview directly? and how ?
    > or I have to buy another program or hardware to be interface?
    >
    > Sent via Deja.com http://www.deja.com/
    > Share what you know. Learn what you don't.

  • Interface between SAP and OSI - PI

    Team,
    Appreciate your response for a query from a customer. Find below
    Kindly help us to get some more details from SAP about the connectivity between OSI-PI system and SAP (PP,EHSM and QM).
    Because, we might use only for one way communication (pull) the data from OSI-PI to get plant information to update our SAP –ECC for informative
    purpose of production reports and EHS.
    Queries:
    Plan A
    1.      Whether OSI-PI RLink is enough for the connectivity to SAP?
    2.      Whether any other interface other than SAP-PI or MII to connect OSI PI?
    Plan B
        1.      From this year,  we are using Honeywell DCS (SCADA) system, whether Honeywell PHD system could connect SAP?
    2.      If the above answer yes , then what is the standard interface using for SAP and Honeywell PHD ?
       The above queries raised because of clarity required for OSI –PI interface minimal connectivity requirement.
    Thanks and regards,
    Irfan

    Hi Ifran,
    Recommend that you use PCo amd MII to integrate to ECC. MII has JCO and BAPI connectors for ECC as well as the capablilty to implement Listeners to receive IDOC from ECC. MII has additonal capabilities such as the Plant Information Catalog that will be very beneficial in defining historian data and providing business context around it.
    PCo has a native OSP PI connector as well as MII connectors that can execute MII transactions directly; the transactions can then execute JCO and BAPI to ECC.
    PCo can connect to Honeywell PHD using the PCo OPC HDA connector. (The Honeywell historian OPC server will need to be installed and activated, preferably on the PCo server.)  PCo also has connectors for TCP Socket, OPC DA, OPC UA, OPC AE, ODBC, OLEDB, FileMonitor, and additional native historian connectors (Aspentech IP21, GE Proficy, CiTectSCADA).
    Regards, Steve

Maybe you are looking for