Interface capability between Lookout and Crestron or Lutron home automation​?

I have an existing project with Crestron home automation equipment, looking to fully automate their irrigation and stormwater systems (PLC, SCADA, etc...  ).  Is there any information I would be able to display on the Crestron screens in the house, and what process/hardware is required, if possible?  Thank You in advance for your time.

I too am looking to use NI Labview to interface with my home automation equipment. I'm a hobbyist, I'm not in the business of selling, programing, installing or servicing home automation equipment. I have access to LabView development tools at work. My boss encourages us to learn our development tools, he would be happy to let me use our LabView development systems after hours.
Equipment I'm interested in controlling and monitoring include:
Crestron CP2E - Compact Control System with Ethernet
Genter / ClearOne -  XAP 400 8x8 Audio Mixer / Conferencing Phone
HAI Home Automation Inc. - Omni LT Home Automation Controller
My primary interest right now is the Crestron CP2E.
Any assistance, or pointing in the right direction would be greatly appreciated. 

Similar Messages

  • The diffirenties between lookout and labview?

    how can i understand the diffirenties between lookout and labview?
    i ve learnt about lookout but known nothing about labview.
    my teacher ask me about this master. and what application we use lookout instead of labview?
    thanks for all your help!

    Lookout is focused on HMI/SCADA application. It uses OPC to communicate with PLCs or devices.
    LabVIEW is much more powerful. LabVIEW is a programming platform, like VC. It can do everything. LabVIEW DSC module adds the functionalities of Lookout to LabVIEW.
    You'd better try the LabVIEW software, to better understand it. See this page. http://www.ni.com/labview/whatis/
    Ryan Shi
    National Instruments

  • Interface connection between BW and R/3

    hi guys,
    I have installed BW and R/3 , i have to give RFC connection between these two. I dont know ,plz any one can tell me step by step, so i can fix it.
    reward points.

    hi konda,
    refer to this link for a step by step guide of best practices:
    http://help.sap.com/bp_biv270/html/BW/I08_EN_DE.htm
    on this page, click on the BI connectivity link in the building blocks. This doc will give u a detailed step by step approach for your problem.
    hope it helps...

  • Interface Relation between ServletRequest and HttpServletRequest

    a newbie question, both are interface, and
    public abstract interface javax.servlet.ServletRequest extends java.lang.Object
    public abstract interface javax.servlet.http.HttpServletRequest extends java.lang.Object implements javax.servlet.ServletRequest
    Why not interface javax.servlet.http.HttpServletRequest direct extends interface javax.servlet.ServletRequest ?

    the signature of HttpServletRequest class is
    public abstract interface HttpServletRequest
    extends ServletRequest
    NOT
    public abstract interface javax.servlet.http.HttpServletRequest extends java.lang.Object implements javax.servlet.ServletRequest

  • Block Demand Depend Interfaces between ECC and SCM

    Hello All.
    Is there a way to block only interfaces of Dependent Demand between ECC and SCM.
    I need to do this because ECC writes over my plan in SCM.
    Thanks and Best Regards

    Hello PrasunM
    For example:
    When you create an Order on finished material, SCM using PP method "3 - Cover Ind. Requ." creates DepReq on raw material.
    SCM using CIF sends PlOrd, PrdOrd and DepReq to ECC. I want send only PlOrd and PrdOrd, DepReq i only need in SCM side.
    Best Regards.

  • Interface between SAP and OSI - PI

    Team,
    Appreciate your response for a query from a customer. Find below
    Kindly help us to get some more details from SAP about the connectivity between OSI-PI system and SAP (PP,EHSM and QM).
    Because, we might use only for one way communication (pull) the data from OSI-PI to get plant information to update our SAP –ECC for informative
    purpose of production reports and EHS.
    Queries:
    Plan A
    1.      Whether OSI-PI RLink is enough for the connectivity to SAP?
    2.      Whether any other interface other than SAP-PI or MII to connect OSI PI?
    Plan B
        1.      From this year,  we are using Honeywell DCS (SCADA) system, whether Honeywell PHD system could connect SAP?
    2.      If the above answer yes , then what is the standard interface using for SAP and Honeywell PHD ?
       The above queries raised because of clarity required for OSI –PI interface minimal connectivity requirement.
    Thanks and regards,
    Irfan

    Hi Ifran,
    Recommend that you use PCo amd MII to integrate to ECC. MII has JCO and BAPI connectors for ECC as well as the capablilty to implement Listeners to receive IDOC from ECC. MII has additonal capabilities such as the Plant Information Catalog that will be very beneficial in defining historian data and providing business context around it.
    PCo has a native OSP PI connector as well as MII connectors that can execute MII transactions directly; the transactions can then execute JCO and BAPI to ECC.
    PCo can connect to Honeywell PHD using the PCo OPC HDA connector. (The Honeywell historian OPC server will need to be installed and activated, preferably on the PCo server.)  PCo also has connectors for TCP Socket, OPC DA, OPC UA, OPC AE, ODBC, OLEDB, FileMonitor, and additional native historian connectors (Aspentech IP21, GE Proficy, CiTectSCADA).
    Regards, Steve

  • Interface between WM and SD

    Hi,
    Is there anybody who can give me the details of the interface between WM and SD through shipping module?
    It would be nice to have few info about WM /PP and WM/QM.
    Thank you in advance.

    Hi,
    The interface is mainly through the LEWM movement type configuration. You need to define the Interim storage type and movement types required to sales process prior to that.
    After you are done with the above settings, then you can configure for the 2 step picking. If you need it.
    Thanks,
    Mono

  • IDOC Interface between CO and BW

    Hi Gurus
    I am just looking for documents about all interfaces between CO and BW/BI. Can any body supply me these??
    Thanks in advance
    SIM

    Hi Joe-
    There are several How To guides that provide detailed instructions on how to automate transactional and master data loads from NW BW into BPC.  Please check out the following guides:
    [How to Migrate Transactional Data|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0427318-5ffb-2b10-9cac-96ec44c73c11]
    and
    [How to Automate Master Data Loads|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00380440-010b-2c10-70a1-e0b431255827]
    Regards,
    Sheldon

  • Docs about Interfaces between CO and BW/BI

    Hi all Gurus,
    I am just looking for documents about Interfaces between FI/CO and BW/BI. Can any body provide me the required documents. It is very urgent....  [email protected]
    Thanks in advance
    SIM
    Edited by: SIM on Feb 22, 2008 12:19 PM

    Hi
    You are right. I meant the interfaces between FI/CO and BW/BI. Namely how do we build the Interfaces such as IDOC and other interfaces between them. I need practice oriented docs with all steps towards building interfaces.
    Thanks
    SIM

  • Interface between paravision and labview

    Hi,
    Does any one here who can help or give some idea how to make an interface between paravision and labview software???I need to acquire captured MRI image from paravision and store it to Labview.
    I would appreciate for any kind of assistance.
    Kind Regards,
    Jasim

    Hi Jasim,
    Could I get a little more information about how you are importing the MRI image into LabVIEW?
    1) How are you getting the MRI image into LabVIEW?
    2) What image format will the image be in?
    3) What will you be doing to the image once it is in LabVIEW?
    Best Regards,
    Bill
    Bill E. | Applications Engineer | National Instruments

  • Interface between sockmod and udp

    Hi,
    where can find info on interface between sockmod and udp stream modules. Iam specifically looking for how sockmod and udp/tcp modules inform each other of the destination ip/port numbers, source port number etc... any help would be greatly appreciated.
    Thanks,
    Surya

    Hi,
    In our case we are using
    IDOC-XI--SOAP ( For all Outbound scenarios)
    In this case ask abt wsdl files for SOAP Structure
    HTTPXI--IDOC ( For all Inbound scenarios)
    In this case POS will directly post the message to intergration server direcly by using parameters like namespace , IS details
    Regards
    Seshagiri

  • What is the difference between conversion and interface?

    what is the difference between conversion and interface?

    Conversion: The legacy system may have a different representation for the data, from that of SAP. A conversion program basically aims at converting the data into a format that is acceptable for SAP.
    Whereas an interface does the actual upload of the data into the SAP system through various means.
    Regards,
    Ravi

  • Interface between XI and BIZTalk

    Hi Guys,
    Can any help me here In Middleware 
    1. i need some INputs between XI and BIztalk
    like what are XI Futures and BIZTAlk
    2. WHat sort of Adapter need in XI to make a Connectivity between XI and  BIZTALK.
    Advance thanks..
    Thanks
    Raj

    Hi,
    Please check this two documents:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/a73e8127-0a01-0010-b19f-f72ee1c2403c
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/107c7a27-0a01-0010-be82-92347921ae03
    Regards,
    Wojciech

  • Interface between Labmax and Labview

    Hi all,
    I am trying to control a laser energy meter, Labmax-top, with labview using labview drivers provided by the meter’s manufacturer (coherent). Once running the labview driver an error message appears saying that the sensor index cannot be found. According to the manual, the sensor index is a number between 1 and 127 and is automatically set by the system.
    Does anyone know how to set this manually? or any experience with these kind of problem?
    Thanks

    I am not familiar with this system at all, but in the worst case your LabVIEW program could just iterate over all possible sensor numbers until it no longer generates an error....
    LabVIEW Champion . Do more with less code and in less time .

  • MTL Interface transaction between a OPM and a non OPM organization

    Hi all,
    I'm doing an automated process in order to transfer some items between an OPM organization and a non OPM organization.
    I have completed all the required fields from mtl_transactions_interface inclusiv the transaction_cost; after the transaction it is processed my items are not costed, the next error it is shown ORA-00001: unique constraint (INV.MTL_CST_TXN_COST_DETAILS_U1) violated.
    Can you give me an idea/solution?
    Thank you!
    All the best,
    Laurentiu

    Hi,
    Initial the were no cost specified, but after the transaction was done the transferred items weren't costed. So i had to detect the cost from the price list associated with the shipping network between organizations.
    Context:
    For a transfer between O1 and O2 ( where O1 is an OPM organization and O2 a non OPM organization, let say an inventory one) there exists a shipping network created (SN1)
    This network SN1 has a price list associated PL1.
    I need that the item transferred from O1 to O2 to come with the price/cost from PL1.
    Thank you!
    All the best,
    Laurentiu

Maybe you are looking for