Interface data contains errors while submitting the Bid by vendor

Hi
This is with regard to strategic sourcing. Purchaser carried out a sourcing with start date 05.03.2010 and end date as 10.03.2010. Now the vendor is trying to create his bid by selecting "Process Bid" option. Vendor is getting Bid invitation no, to create a Bid. Here while submitting he is getting the error as " End date has been reached. The submission deadline has passed", eventhough the end date is 10.03.2010. And getting a message "Interface data contains errors". So he is not able to submit the bid. For all the bid invitation vendor is getting this problem.
How to resolve this?
Thanks

Hi Muthu
Thanks for ur response. It was a no range problem which I found & rectified.
Regds

Similar Messages

  • Bid Response : Interface data contains errors

    Hi Gurus
    We have created a bid invitation ,the worflow is set on Without Approval . We are trying to create a bid response , after maintaining the bid , we select check and get the error " Interface data contains errors"
    Does anyone know how to go about resolving this

    Hi,
    Have you implemented any BADI in your system?If yes,please check whether it is properly activated or not.The error log is due to the improper implementation of some badi.
    for the time-being,
    Try de-activating all the custom BADI Implementations and chek, what is happening, in the standard SRM system.
    BR,
    Disha.
    Do reward points for useful answers.

  • Interface data contains error

    Hi Expert,
    We're facing error 'interface data contains error' when generate Purchase Order for bid submitted by bidder.
    anyone has experience with this error?
    Thanks,
    Yusup

    Hi
    Please refer this note 1042490 - Interface Data contains Errors in the sourcing cockpit.
    This note might be useful for you.
    Muthu

  • Interface data contains errors

    Dear all,
    We are on SRM 7.0. When trying to create a purchase order from an accepted bid the following error appears:
    "interface data contains error", no more details shown.
    It happens with both buttons: "Create Purchase Order" and "Simulate and create purchase order".
    Any ideas to solve it?
    Thanks
    Ezequiel

    Hi Eze
    purely no range issue
    create purchase order from bid invitation
    Standard process for PO creation from Bid Invitation or Bid
    double confirmed. revisit your Bid invitation , bid and Po number ranges.
    br
    muthu

  • Error in using BAPI_CONFEC_CREATE : Interface data contains Errors

    Hi,
    I am using this BAPI BAPI_CONFEC_CREATE to create confirmations locally in SRM for a PO. I am following Documentation available for this BAPI.  But when I excuted with below data getting error " INTERFACE DATA CONTAINS ERRORS"
    I am passing these data:
    Hedaer: Ref_doc_no - PO Number
                  Description:
                 Process Type: "CONF"
    Header_cust:  parent_guid : PO GUID
    Item: Parent: PO Header GUID
            PO Number: PO number
            PO GUID: PO HEDAER GUD
            PO ITEM Number: PO item Number
           PO_ITEM_GUID: po item guid
    Account:
                   Parent_GUID : PO Item GUID
                   G/L acct : Po G/l acct
                   cost center : PO cost center
    what are the data sholud be passed to this BAPI?
    Am I missing any input data to this BAPI? Please let me know.
    Am I using correct Function Module to create a confirmation for a PO in Stand alone scenario?
    Thanks.
    Shears
    Edited by: Shears80 on Sep 10, 2010 1:39 AM

    Hi Matt
    I'm using the same FM but it's not working. Can you please share what data you are passing in the FM.
    After debugging I found that my confirmation is getting created but it's not getting saved.
    Please enlighten me.
    Thanks
    Ankit

  • Getting Duplicate data Records error while loading the Master data.

    Hi All,
    We are getting Duplicate data Records error while loading the Profit centre Master data. Master data contains time dependent attributes.
    the load is direct update. So i made it red and tried to reloaded from PSA even though it is throwing same error.
    I checked in PSA. Showing red which records have same Profit centre.
    Could any one give us any suggestions to resolve the issues please.
    Thanks & Regards,
    Raju

    Hi Raju,
            I assume there are no routines written in the update rules and also you ae directly loading the data from R/3 ( not from any ODS). If that is the case then it could be that, the data maintained in R/3 has overlapping time intervals (since  time dependency of attributes is involved). Check your PSA if the same profit center has time intervals which over lap. In that case, you need to get this fixed in R/3. If there are no overlapping time intervals, you can simply increase the error tolerance limit in your info-package and repeat the load.
    Hope this helps you.
    Thanks & Regards,
    Nithin Reddy.

  • BBPCF02 - BBP_PD002 Interface data contains errors

    Hi all,
    I need your help.
    We have a problem when the user confirm a purchase order from transaction BBPCF02.
    During the creation of confirmation the system returns the pop-up with message "Interface data contains errors".
    I have SRM 5.0 classic scenario.
    Thanks in advance.
    Davide

    refer to note 805965. Although this note is not exactly for the problem you are stating but it should be close enough to solve your problem.

  • External transfer of PR ( PDP Scenario ) : Interface data contains errors

    Dear All,
    We are in SRM Server 5.5, Extended Classic.
    Scenario >> Plan driven procurement
    We have  a purchase requisition generated via Plant Maintenence order. The PR is created for services and also has limits maintained ( overall and expected value ).
    The PR is not getting transfered to the SRM.   However in SRM SLG1 we see error log :
    Interface data contains errors
    Message no. BBP_PD002
    Please advice if you have faced similar issue.
    Regards,
    Anil Rajpal

    Hello,
    You can debug the PR transfer to find out why this error is coming.
    1. Go to table EPRTRANS -> take the PREQ number.                                       
    2. Go to SE38 -> BBP_EXTREQ_TRANSFER -> F8 -> provide PREQ -> /h -> F8.                
    3. Go inside FM BBP_EXTREQ_TRANSFER ->                                                
    4. Go inside perform transfer_package ->                                              
    5. Go inside Perfrorm Send_pr_to_procsystem ->                                        
    6. Clear lv_qrfc = '' -> goto inside FM BBP_BC_EXTREQ_INB ->  Here SRM will be called (maintain the RFC connection with dialog user. Then it will be able to debug onto SRM side).
    Once logged onto SRM, put a breakpoint at FM BBP_PD_MSG_ADD. Here error will be triggered. If you go back some steps via call stack, you can see why this error appears.
    Regards,
    Ricardo

  • No data Exists error while retrieving the data from a table

    Hi Everyone!
    I am getting "No Data Exists" error while retrieving the data from a table....where i need to check...if possible please give me example link.....please help me regarding this

    Hi !
    thanks for ur response...
    I have written vo.executeQuery for the table...My page is running but i m not getting the data....I have to select two LOV's and when I click on Go button the data has to display in the table...After the selection of LOV's when I click on Go in the table "No data exists" message is appearing...the table has the data and the query is also executing...please give info where i did the mistake....

  • Errors while submitting the SQL * Plus  Report

    I am getting th efollowing Error while submitting the Concurrent request to run a report.
    FND_CANNOT FIND FILE
    concurrent manager encountered an error while running sql * plus for yours concurrent request
    Please respond ASAP

    Hi,
    Duplicate post see:
    Please advise on the Error immediately
    Regards,
    Gareth
    Blog: http://garethroberts.blogspot.com/

  • Error while submitting the Invoice

    Hello Everyone,
    We are using SRM 5.0 with Extended classic scenario.
    I am having a problem while submitting the Invoice.
    I keep getting errors saying I need to enter a quantity for a line item that has already been billed in full.  When I enter a quantity I then get new error messages telling me I've exceeded amount for that line item.
    Please help me in this.
    Thanks & Regards,
    Khushbu.

    Hi,
    This is typically a process issue. There are a few things I think you can do...
    a. If the invoice has reached customer already (bcoz it was raised in the month of May), then, as you now cannot cancel as there has been a lot of wrong entries, you an create a credit memo either from SD side or from FI side so that the customer a/c is balanced and it will not show any AR balance.
    b. Raise a debit memo request against the right customer and invoice it.
    I think you have to work with your Finance people to be in concurrence before you take up he above process.
    Thanks
    Mukund S

  • Stale data error while submitting the form(before that opening the popup )

    I am using OAURL to open a pop-up in my oaf page
    passing my page to this class.And at the time of loading the base page
    the pop up window url is like this
    OA.jsp?page=/myfolder/webui/NumberColumnsPG&retainAM=Y&"+"fndOAJSPinEmbeddedMode=Y&addBreadCrumb=S&_ti=55514227&oapc=10
    now i click on the link to open the pop-up
    its opening the pop-up.
    Closing that pop-up.
    Saving the details entered in the base page.
    Now it is executing again from the processRequest() of base page
    now the URL like this...
    OA.jsp?page=/myfolder/webui/NumberColumnsPG&retainAM=Y&"+"fndOAJSPinEmbeddedMode=Y&addBreadCrumb=S&_ti=55514227&oapc=11
    Now i am getting stale data error
    The number of displayed records, 2, exceeds the actual number of records, 1, in view object SampleAM.SampleVO1. Some of the displayed records may have been deleted.
    Here i am observing that the parameter OAPC is different in these two URLs.
    can you please tell me how to come out of this error while i am submitting the base page.
    Thanks

    Hi Pratap,
    Thanks for your information.But there i didn't get any information related to my issue. can you please tell me a way to proceed further in order to solve this issue.
    Thanks
    Satya

  • OPM Accounting Pre-Processor - Error while Submitting the Program

    In R12 Vision Instance, I am trying to submit the OPM Accounting Pre-Processor Program and it is giving the error as per below
    Open Period not found for Legal Entity PRU-Vision Process Industries (US), Cost Type STND, Stard Date 01-JAN-2010 00:00:00 and End Date 31-JAN-2010 23:59:59.
    I checked the GL Periods, the GL Period are open.
    I checked the Costing Calendar, I have created a Costing Calendar for 2011 and STND Cost Type and the Periods are also open.
    Is it something I am missing here ?
    Tried searching on MOS, couldn't find much.

    We were able to find it.If such error comes just check the data template and layout template.Try to run it in Template Builder and if its without any error then try it by submitting the conc pgm.
    Thanks.

  • Data access error while running  the script in fdm workbench script editor

    Hello Experts,
    I have been getting the error when i run the script in script editor of fdqm workbench client.this is the error
                              -2147467259 Data access error and it is navigating the error at line 30 about this script "Set rsAppend = DW.DataAccess.farsTable(strWorkTableName)"
    Please revert me asap where i should load the data from peoplesoft to one of my planning database through fdm.
    Thanks in advance...

    Hi,
    Thanks for your suggestion's here i am going to run the datapump script so while i am running in workbench it is throwing data access error.So as you guy's suggested i created one import format and added this script to that import format which is added to one of my location even it is throwing the same error.I am getting the error at this sentence   "strWorkTableName" I want to know what is this where it reflect's?So my question is Is there any difference while running data pump or integration script.Please let me know a detailed navigation steps to run this script's with out data access error to run these kind of scripts.
    Note:Again my target is to load the data to planning database through fdqm which i am doing through sql statement's.
    Suggest your valuable suggestion's
    Thanks in advance...
    I am getting the error at this sentence   "strWorkTableName" I want to know what is this where it reflect's?

  • No approval workflow  found error while processing the  Bid Invitation

    We are working on SRM 5.0 (SP level6). We are able to create the bid invitations successfully from the sourcing cockpit. However while saving the changes in the bid invitations, system shows the error "No approval workflow  found". When checked in SWB_PROCUREMENT , no workflow exists for object" BUS2200, Bid Invitation EC"in the standard SRM.
    Kindly confirm what is missing...
    NNK

    Hi Nitin,
      Use T-code OOCU - Task custamising overview. Then SRM-EBP --> SRM-EBP-WFL then active event linking.
      Please activate WS145000026 for automatic approval of bid. or WS145000027 for one step approval of bid invitation.
    This will help to solve your problem. IF not please reply me the error.
    Regards
    Apparao.

Maybe you are looking for