Interface design in config profile

Hi
After creation of interface design in config profile and I have assigned new tab in cu50 .
But after I have created one sale order , then I removed interface design object from config profile again I maintained same as like before .
But once I changed interface design even though I maintain again which is not updating as like before.
Can you tell me wt should I do for the same?
Regards
Ishikesh

pls close this issue

Similar Messages

Config profile

Hi
Can you tell me in config profile in user interface tab we can see a interface design field and
where we can design the same ?
Regards
Ishihesh

Hi,
The interface design field will be active if a class is assigned to the material.If there is no class this field will be in grey mode.
If it si in grey mode then assign a class 300 to the material .You can give a name to the design
The same interface design can be assigned to several materials also.
CSN

Digitally signing the config profile

The 'General' tab of the web configuration tool provides an interface for signing the profile. I have an internal certificate authority installed. Can someone provide guidance on how to generate a certificate for the profile using the internal CA so that it can be applied to the config file?
Thanks!

Good question!
I'm asking myself the same... WHAT kind of "private key" is there supposed to be? PEM, RAW, etc.
Types "raw 1 and 12" are supported, but how do I generate one of these myself using OpenSSL? And what kind is 1 and / or 12? PCKS#7 ... 12 ...?
Badly documented, Apple!

Cisco 5508 interface design problem

Cisco 5508 interface design
now i have connect wlc into infra same picture but ap can't register into wlc. How create interface for this diagram. please help me because access switch is unmanage switch i can't config trunk on this.i can install for this solution this isn't ?
thank you for best support.
samy

Why are your AP's on different Vlans?
If you plan to create SSID's on different Vlans then you will need a trunk port to the WLC as the switch needs to pass tagged frames to it and the WLC needs to pass tagged frames back.
Out of interest, you are using a 5508 which is a fairly expensive piece of kit yet you are connecting it to an unmanaged switch. Why?

CU50 - Variant Interface Design

I am trying to change my Interface design for a Variant Material using CU50. However, when I click on the menu option Value Assignment > Interface Design, all my options are greyed out (aka I can't select them). I have a valid configuration profile and I have specified an Interface design title on my configuration profile in CU42.
What would cause those options to be unavailable (greyed out)? Am I missing an option on my configuration profile? Is there something in SPRO I'm missing?
Thank you,
Scott

1.kindly check if youa re having the authorisation for the below object C_LOVC_DSG
2. Also are u trying some thing like characteristic grouping ?
revert back
reg
dsk

Interface Design- Varient Configuration

Hi
I am very much new to this functionality-Varient Configuration.
I did not understand why we define Interface design while creating the configuration profile
and how this is going to help.
Thanks & Regards
Satish

Hi Satish,
see SAP Help:
Interface Design - Overview - Variant Configuration (LO-VC) - SAP Library
The benefit to create an interface design is the user interface of CU50 or MM02 etc.
You can group your characteristics e.g. according to marketing/engineering/manufacturing and then all the responsible people can have their own set as a separate tab in CU50 when doing the configuration simulation.
You can also use buttons to use different functions of VC.
Hope this helps.
Best regards
Tamas

Improving Interface design

Hi all ,
I need your suggestions in improving the current interface design.
We have an interface: Sending System--->(JMS Adapter) PI 7.1(IDOC) --> (Idoc)ECC
This is the current situation:
Sending System sends 1 file with 1000 transactions, out of which 70% gets filtered in PI and sends nearly 300 idocs to ECC.
Right now we have this interface for 1 company code. Few transactions should give out DELIVERY idoc and few should give out MBGMCR idocs.
Few Fields like MESSAGECODE, MESSAGEFUNCTION, MOVETYPE, etc in the IDOCS etc. have complex udfu2019s.
UDFu2019s have the logic based on 6 incoming fields(companycode, Transaction, Supplier, PO,ReturnComp, DirectWithdrawal)
2 Message mappings- one for MBGMCR and 1 for DELIVERY
In receiver Determination.. we are doing routing based on company code.
In Interface determination, we have a complex condition for MBGMCR (based on 5 fields)which is taking 3 times more than mapping execution time (Mapping-2 sec and Interface mapping condition check takes 6 sec).
New Business Requirement:
Now the business wants us to develop a prototype which will reduce extensive testing when new conditions are added. So they want more flexible solution as this interface will be taking care of the further rollouts where new plants and conditions will be added. While adding new conditions business is worried that the existing logic shouldnu2019t be affected and retested.
So few options which came into picture are:
1. Maintaining a database table where a table will be updated with conditions. In PI we will do a look up to check the incoming values match the values in table and return the corresponding output values.
Consequences: Due to large volumes sent everyday nearly 500,000 messages a day . Each msg containing 1000 transactions out of which 70% gets filtered in PI. So we expect 500,000 RFC calls will lead to performance issues in PI.
2. Filtering Transactions on the sending system & sending some kind of flags (for transactions to be processed) which will reduce filtering in PI and save lot of system resources also. But this is not feasible from business point of view.
So now the question is :
Is there any other better way to avoid retest of the currently existing logic when new conditions are added .
(keeping performance in mind.)
Your suggestions are highly appreciated.
(I know this a lengthy post. But Thanks for your time and for your valuable suggestions)

While adding new conditions business is worried that the existing logic shouldnu2019t be affected and retested.
honest opinion would be the person who does the re-config needs to be more careful and not touch the existing mapping/ routing conditions etc.
there is no other way wherein you can say that shield part1 of the MappingA while somebody makes a new change to the same mapping.
If your fear (or of the business') that it may happen that even existing logic is deleted while making new one then as a workaround you can suggest that we can easily retrieve the old logic (object)...at least when it comes to ESR/ IB.

No Refreshed Interface Design in After Effects CC 2014

Sort of an odd question, but how do you change the interface design in After Effects CC 2014 to be the new "Refreshed Interface Design"? Like with the blue text color, borders, and different look panels (as seen in the first image linked). I updated to Adobe After Effects CC 2014 yesterday, and for some reason, my interface design has not changed at all. Is there somewhere in preferences where I can change this? I would appreciate any help, thanks.
What it is supposed to look like:
http://helpx.adobe.com/after-effects/using/whats-new/_jcr_content/main-pars/image_1.img.pn g/ae-interface.png
What my After Effects looks like:
http://puu.sh/dfYbm/aa366e60fd.png

Your second image shows After Effects CC 2014 (13.0). The new UI comes with After Effects CC 2014 (13.1).
I'm curious about how, exactly, you installed the software, since you should have gotten After Effects CC 2014 (13.1.1) if you installed from the Creative Cloud service.

MMS not working in iPhone4S when installing config profile with APN

When we use the iPhone Configuration Utility (either the latest version or previous versions) to create a config profile with APN info, then install the profile to an iPhone4S, we noticed that MMS (multimedia messaging) was no longer working. This means we could not send or receive MMS messages. And this is MMS going over the MMS protocol (and not iMessage). We had not seen this before. We routinely do config profiles with APN info and have done for all iPhone models and iOS version before the new iPhone4S. Never had a problem with MMS or anything else. This is for iPhone4S devices in the AT&T network. It is easy to reproduce and you don't need an enterprise APN for that. In fact just a config profile with AT&T's APN settings will still break MMS when installed (other than the MMS, everything else works fine).
It does not appear an iOS 5 issue. iPhone4 (or iPhone3GS) with iOS 5 do not have this problem. It appears to be tied to the new iPhone4S hardware. The same configuration profile (with the APN info) works fine on iPhone4 with iOS 5 (MMS works fine), but when you put the very same configuration profile to an iPhone4S, MMS quits working.
Doing a network reset does not solve the problem. Only removing the profile fixes the MMS
Any ideas, explanations or workarounds?

I called the Apple care line, and eventually got to 4th tier support, where they declared that there must be an issue with the APN I'm using, regardless of the fact that none of the iPhone 3G, 3GS', and 4's in our office are experiencing this issue while using the same APN. I guess I shouldn't be surprised about this, afterall who'd expect Apple to actually admit there's a "bug" in one of their products, especially since this is hapenning to a very small number of users on the 4S. Getting to 4th tier support was free, but to be able to talk to someone who can actually investigate this issue will cost $700.
I offered to give them access to our private APN for testing, but they were "unable to do that sort of testing". Additionally, we have tested using a public APN from AT&T (wap.cingular), and still experience the same issue.
Lastly, I did some further digging, and I think it has something to do with PDP Context 2 not getting an IP address. As a disclaimer, I have no clue what a PDP Context is, what it does, what it's for, but obviously MMS needs it. Going into field test mode on the phone will allow you to see the PDP Contexts, and is where I got this info from.
On the iPhone 4S, without an APN profile installed, the PDP Contexts are listed 0-3. These 4 contexts have values for an APN, and an IPv4 address, although context 0 and 2 are the only ones that have values in them.
When an APN profile isnt installed, MMS' can be sent, cellular internet doesn't work., the values are:
Context 0
IPv4:    ip is blank
APN:   phone (this is the default APN for the iphone 4s on att).
Context 2
IPv4:     has a valid public IP address
APN:     wap.cingular
When an APN profile is installed, MMS's can't be sent, but cellular internet does work, the values are:
Context 0:
IPv4:     Valid public IP address is present
APN:     Our enterprise APN
Context 2:
IPv4:     ip is blank.
APN:     wap.cingular
It appears that when Context 2 has an IP address, MMS' are able to be sent. One other interesting fact, on the iPhone 4, only 1 PDP Context is listed, while the 4S has 4 listed.
Hopefully this issue will be resolved in the 5.1 update, as this update contains a baseband update for the 4S, updating it from 1.0.14 to 1.2.01-1. Unfortunately I don't have access to a 5.1 beta, otherwise I'd test this my self. If anyone has access to the beta, and wants to test APN profiles/MMS send status, we'd greatly appreciate it!

CS5/CS4 GUI User Interface Design

I have always been very unimpressed with the user interface design on Adobe CS4. It's riddled with problems and changes that make no sense and offer no advantages.
For example, there is no longer a normal Windows title bar in many of the CS4 apps. This makes it much more difficult to maximize/restore applications since normally a Windows user could simply throw the mouse to the top edge of the screen and double click the title bar. In fact, doing this with CS4 apps has ZERO function (it doesn't do anything). One would think that by moving the menu commands to the top bar of the window chrome, Adobe would make these menus accessible from the top-most edge of the screen in order to increase usability. Unfortunately this is not so and clicking the top most edge of a maximized window does nothing.
Two other very important parts of an application user interface are the upper left and upper right corners. Normally when a Windows application is maximized, throwing your pointer to the upper right corner and clicking will close the application. Throwing the pointer to the upper left corner and clicking will reveal the application window menu. This happens in ALL applications... EXCEPT for Adobe CS4 programs. These two extremely important application window command locations have been completely disabled in Adobe CS4 apps. Clicking the upper most corner pixels in a maximized Adobe CS4 app does nothing.
Then there's the tabbed document window interface. If you float a document window and maximize that, normally you would expect it to become maximized within the application window as it should. Au contraire, in Adobe CS4, the document window maximizes itself ON TOP OF the application window, thus obscuring and disabling any access to the application window's tools/commands. I did report that as a bug during beta, but obviously it was ignored. Seems kind of obvious to me that the fact that a user could accidentally make the entire application completely unusable by maximizing a document window might be a problem.
It still alludes me as to why Adobe changed the CS4 user interface to something that breaks so many Windows UI conventions. Adobe CS3 was a practically perfect user interface design on Windows. It was very customizable, all of the normal Windows functions were properly in place.
What's the deal with the change?
I thought maybe the file menu was moved in place of the title bar in order to make more room for other UI elements, but it's actually pretty much the same size as the old file menu title bar combination in CS3.
With all these changes and with all the functionality losses, what exactly have we gained in the CS4 GUI? Seriously, I'm asking.
Anyway, I hope Adobe starts reading the Windows User Experience Guidelines (http://msdn.microsoft.com/en-us/library/aa511331.aspx) and brings CS5 back to the way a Windows application should behave. Proper theme adherence would be nice too.
Which brings me to Windows 7. I love love love the way Windows 7 groups application document previews in one taskbar icon and allows aero-peek for open windows. Adobe CS 4 obviously does not support this since it does not have normal document windows. I hope CS5 does because it is a great feature. I also hope Adobe CS5 implements the Windows 7 jumplists and maybe even a more touch/multi-touch friendly interface. I've become pretty good at processing photos in Bridge using the touchscreen, and it's very cool, but it could use some improvements.
For an example of great user interface design, has anyone tried Office 2010 on Windows 7 yet? http://www.istartedsomething.com/20090512/screencaps-office-2010-technical-preview-teched- 2009-keynote/
The faded transparent title bar and tabbed ribbon interface is absolutely gorgeous.

@Adam:
I agree with your comments! So well said!
And there are other issues, too -- by the color of the app window, you don't know if the window is active or inactive (focus or not in focus). Titles of panels which are inactive, are dark text over dark background -- hardly readable at all... And many more.
I really hope Adobe are listening...

A config profile deployed on my devices without my permission.

I believe a config profile deployed on my devices without my permission to access my information. These are consumer only products (iPads and iPhones). Is this legal and what can i do to remove them? Profile does not show in settings. I see info via the diagnostics and usage data. I tried wiping all devices but does not remove it. Please help.

What profile? Where are you seeing this? What's it called? Is your phone enrolled in an MDM server??? If you don't see anything in Settings -> General -> Profiles, then none are installed.

Is this new interface design right or do I still have some graphic probs ?

Is that interface design right after the last update ?? I think the old onne looked much more clear for a better workflow... this one just looks a little cheap and strange to me ....
brgds
SG

the stripes are supposed to be the "locked" visualtization, but anyhow it locks strange to me .. well i will see ... thank you anyway :-)

Interface Designer: "Reading Class File" fails

I'm just trying the Apple Cocoa Tutorial (ConcurrencyConverter). I have a problem at the point where you shall load the class file "ConverterController.h" into the Interface Designer. It always fails with the error "Parsed 1 source file, but no buttons were found...".
Even when I copy and paste the header file from the tutorial it doesn't work. It looks like this:
#import <Cocoa/Cocoa.h>
@interface ConverterController : NSObject {
IBOutlet NSTextField *amountField;
IBOutlet NSTextField *dollarField;
IBOutlet NSTextField *rateField;
- (IBAction)convert:(id)sender;
@end
I have no idea what to do now, can you help me?

digitalformula wrote:
Your note about the outlets etc actually being there but needing to look harder made me stare at the screen for a few minutes ... I can't see them though.
Maybe they just don't show up in Xcode 3.2.1???
Hi DF -
I don't know how to guide you further since I don't have 3.2.1. Did you see Ruud's most recent post?
Ruud Wijnands wrote:
... if you click on the connections tab they are shown there in in unconnected state.
Assuming this much hasn't changed since 3.1.4, besides the Class Outlets table in the Identity Inspector, there are two places to look for Outlet and Action connections:
1) When you ctrl-click on an object (e.g. the icon for a controller), a black, floating panel should come up listing all connections from and to that object. Be sure to select the object in the xib (icon) window with the View Mode switch in the Center position. With that View Mode setting, the xib window should display a two column table with a tree of small icons to the left. By expanding the nodes in that tree you should be able to find every object in the xib;
2) When you select an object (in the xib window as above), the Connections Inspector (cmd-5) should display all possible connections from and to the object. I assume this is the view Ruud referred to as "the connections tab".
I don't recall seeing a case where the black panel list differed from the list shown in the Connections Inspector, but it wouldn't hurt to look at both. If neither of the above finds the connections when _you've seen your custom class in the Identity list, and set the object in question to that class_, I might suggest closing the xib and restarting IB. You could also try modifying and resaving your custom object's @interface file just to stir things up a bit (e.g., remove all the IBOutlet declarations, save, then add them and resave).
It might also help to start a new project and do nothing else but add one custom class to see if you have better luck getting IB to import the correct connections in the new context. E.g., add a NSObject subclass named Foo with one ivar such as IBOutlet NSWindow *Bar; then see if you can add a blue cube to MainMenu.xib, set its identity to Foo class and see the Bar outlet.
For more details on connecting custom objects, see "Setting the Class of an Object" and "Injecting Class Information into a Nib File" under Xcode Integration in the +Interface Builder User Guide+.
Of course it's possible we're dealing with a bug that's unique to 64-bit 3.2.1. I've searched the web, the 3.2.1 Release Notes and the Xcode Mailing List for reports that might confirm this, but haven't found anything interesting yet. So I think we should continue to assume that Xcode 3.2.1 is capable of obtaining custom class info, and we're just dealing with some misunderstanding. Hopefully, one of our forum experts who has 3.2.1 will join the thread to shed some more light on the topic.
\- Ray

Interface design V class design

Why is it more important for an interface design than for a class design to anticipate all possible uses for the interface?

come on.. I was gonna do this
//interface
interface IshouldBeSleeping
public void IamSadistic();
class WhyAreWeAnsweringThis
public double habitualProcessOfWorkingForLameCurrency
return 0.0001;
}

HT1631 Password policy via config profile doesn't unlock keychains

When applying a password policy via installed configuration profile from Profile Manager, user keychains are not updated when user changes their password at login prompt. How can we prevent this from happening and still prompt a user to change their password via the config profile's and OS's standard behavior?

OS X Mountain Lion: About your keychain password

Interface design in config profile

Similar Messages

Maybe you are looking for