Interface Design- Varient Configuration

Hi
I am very much new to this functionality-Varient Configuration.
I did not understand why we define Interface design while creating the configuration profile
and how this is going to help.
Thanks & Regards
Satish

Hi Satish,
see SAP Help:
Interface Design - Overview - Variant Configuration (LO-VC) - SAP Library
The benefit to create an interface design is the user interface of CU50 or MM02 etc.
You can group your characteristics e.g. according to marketing/engineering/manufacturing and then all the responsible people can have their own set as a separate tab in CU50 when doing the configuration simulation.
You can also use buttons to use different functions of VC.
Hope this helps.
Best regards
Tamas

Similar Messages

PI B2B RNIF interface design and configuration

Hello All,
can anybody send me details of design steps and configuration steps in detail for RNIF 2.0 framework for PIPS
Preferably Rosettanet 7B1 WIP Tracking, Rosettanet 3B12 Shipping Request
thx
mike

Any body who can guide me the steps in ESR for RNIF PIP interfaces. I am expecting step by step instructions.
Thank you very much!!
mike

Create new interface design for configuration copying already existing

Does anybody know how to do it?

2. Since the IDOCs are already mapped to Interface A, will they be also processed to Interface B if I reuse them ??
Interface A and Interface B will work as two different scenarios (Since Receiver Determination is reused.....you will have Message Branching......will see this in SXMB_MONI when you test the scenario(S))
If you want to avoid any confusion then have conditions defined in Receiver Determination (if not considered then ask your business person to have a look into this approach).....this will avoid unnecessary execution of both the interfaces (A and B).
Regards,
Abhishek.

How to see version history of changes of a design or configuration object.

Hi All,
Is it possible to see a version history of the changes of a particular design or configuration object?
If so then please let me know, how we look that?
Regards,
Soorya

Hi,
U have to check all the versions,modified date ,type(created,change) in all the developed objects history.Select any developed object like data type,message type, mapping,interface mapping in IR and also in ID Objects.Select developed object,then go to its menu ,then select __History__.it shows all the information about that object.
Thanks
Ravi

CU50 - Variant Interface Design

I am trying to change my Interface design for a Variant Material using CU50. However, when I click on the menu option Value Assignment > Interface Design, all my options are greyed out (aka I can't select them). I have a valid configuration profile and I have specified an Interface design title on my configuration profile in CU42.
What would cause those options to be unavailable (greyed out)? Am I missing an option on my configuration profile? Is there something in SPRO I'm missing?
Thank you,
Scott

1.kindly check if youa re having the authorisation for the below object C_LOVC_DSG
2. Also are u trying some thing like characteristic grouping ?
revert back
reg
dsk

No Refreshed Interface Design in After Effects CC 2014

Sort of an odd question, but how do you change the interface design in After Effects CC 2014 to be the new "Refreshed Interface Design"? Like with the blue text color, borders, and different look panels (as seen in the first image linked). I updated to Adobe After Effects CC 2014 yesterday, and for some reason, my interface design has not changed at all. Is there somewhere in preferences where I can change this? I would appreciate any help, thanks.
What it is supposed to look like:
http://helpx.adobe.com/after-effects/using/whats-new/_jcr_content/main-pars/image_1.img.pn g/ae-interface.png
What my After Effects looks like:
http://puu.sh/dfYbm/aa366e60fd.png

Your second image shows After Effects CC 2014 (13.0). The new UI comes with After Effects CC 2014 (13.1).
I'm curious about how, exactly, you installed the software, since you should have gotten After Effects CC 2014 (13.1.1) if you installed from the Creative Cloud service.

Unable to save the sales order in varient configuration

Hi Gurus,
In varient configuration i have done all the settings and it works fine, and i am getting one error
while saving the sale order(incomplete long) showing configuration.
while click the error shwoing like this :
Item 000011 can only be changed by configuring material XXXX(item 000010)
Error Message NO. V1456
(Item &1 can only changed by configurable material &2 (item &3))
Please help in in this regards.
Where i am missing the settings.
Thanksa and reagards
E.Rambabu

Dear Rambabu,
While saving the sales order Configuration showing in the incompletion log means it is related to configurable material only so you look in these areas,
1.Check the BOM settings whether BOM is exploding properly or not.
2.Item category is getting determined or not.
3.Have you able to select the sub item items through configuration selection screen or not.
4.Go to transaction VOV7 check the item category settings related to the configuration.
5. Have you maintained all the data in the KMAT (Configurable) material master data like class assignment etc.
I hope this will help you,
Regards,
Murali.

Varient configuration & batch management

Dear all,
How varient configuration is related with MM,Which are the related T-codes for it .How it is configured.
What is difference between material maintainance through varient configuration & Batch management.
Is it possible to maintain material by above options.
Regards,
Nitin Patil.

hi
Varient configuration & batch management are have diffrent use
Varient configuration is use for the material with diffrent properties like CARS
material is same but only due to the color the selling price will differ
likewise to keep single material with diff charecteristics Varient configuration will be used
http://help.sap.com/saphelp_erp2005/helpdata/en/d8/fa9bd49ede11d1903b0000e8a49aad/content.htm
http://www.sap-img.com/sap-sd/steps-for-sd-variant-configuration.htm
http://www.adelante.fr/IMG/pdf/VC101_a_beginner_s_guide_to_variant_configuration.pdf
http://www.pesoa.de/pages/Publications/Fachberichte022004/PESOA_TR_6-2004%20Variant%20Configuration%20of%20Software%20Systems.pdf
http://www.sap-basis-abap.com/sd/steps-for-variant-configuration-and-pricing.htm
BATCH MANAGEMENT
With batch handling, you can manage not only production lots from in-house production, but also production lots from vendors as separate entities.
http://help.sap.com/saphelp_46c/helpdata/en/dd/6a5c580f6011d383720000e8a5eb64/content.htm
http://www.sap-img.com/quality/batch-management-batch-classfication-configuration.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOBM/LOBM.pdf
http://help.sap.com/bestpractices/BBLibrary/HTML/J19_BatchManagmnt_EN_DE.htm
regards
kunal

CS5/CS4 GUI User Interface Design

I have always been very unimpressed with the user interface design on Adobe CS4. It's riddled with problems and changes that make no sense and offer no advantages.
For example, there is no longer a normal Windows title bar in many of the CS4 apps. This makes it much more difficult to maximize/restore applications since normally a Windows user could simply throw the mouse to the top edge of the screen and double click the title bar. In fact, doing this with CS4 apps has ZERO function (it doesn't do anything). One would think that by moving the menu commands to the top bar of the window chrome, Adobe would make these menus accessible from the top-most edge of the screen in order to increase usability. Unfortunately this is not so and clicking the top most edge of a maximized window does nothing.
Two other very important parts of an application user interface are the upper left and upper right corners. Normally when a Windows application is maximized, throwing your pointer to the upper right corner and clicking will close the application. Throwing the pointer to the upper left corner and clicking will reveal the application window menu. This happens in ALL applications... EXCEPT for Adobe CS4 programs. These two extremely important application window command locations have been completely disabled in Adobe CS4 apps. Clicking the upper most corner pixels in a maximized Adobe CS4 app does nothing.
Then there's the tabbed document window interface. If you float a document window and maximize that, normally you would expect it to become maximized within the application window as it should. Au contraire, in Adobe CS4, the document window maximizes itself ON TOP OF the application window, thus obscuring and disabling any access to the application window's tools/commands. I did report that as a bug during beta, but obviously it was ignored. Seems kind of obvious to me that the fact that a user could accidentally make the entire application completely unusable by maximizing a document window might be a problem.
It still alludes me as to why Adobe changed the CS4 user interface to something that breaks so many Windows UI conventions. Adobe CS3 was a practically perfect user interface design on Windows. It was very customizable, all of the normal Windows functions were properly in place.
What's the deal with the change?
I thought maybe the file menu was moved in place of the title bar in order to make more room for other UI elements, but it's actually pretty much the same size as the old file menu title bar combination in CS3.
With all these changes and with all the functionality losses, what exactly have we gained in the CS4 GUI? Seriously, I'm asking.
Anyway, I hope Adobe starts reading the Windows User Experience Guidelines (http://msdn.microsoft.com/en-us/library/aa511331.aspx) and brings CS5 back to the way a Windows application should behave. Proper theme adherence would be nice too.
Which brings me to Windows 7. I love love love the way Windows 7 groups application document previews in one taskbar icon and allows aero-peek for open windows. Adobe CS 4 obviously does not support this since it does not have normal document windows. I hope CS5 does because it is a great feature. I also hope Adobe CS5 implements the Windows 7 jumplists and maybe even a more touch/multi-touch friendly interface. I've become pretty good at processing photos in Bridge using the touchscreen, and it's very cool, but it could use some improvements.
For an example of great user interface design, has anyone tried Office 2010 on Windows 7 yet? http://www.istartedsomething.com/20090512/screencaps-office-2010-technical-preview-teched- 2009-keynote/
The faded transparent title bar and tabbed ribbon interface is absolutely gorgeous.

@Adam:
I agree with your comments! So well said!
And there are other issues, too -- by the color of the app window, you don't know if the window is active or inactive (focus or not in focus). Titles of panels which are inactive, are dark text over dark background -- hardly readable at all... And many more.
I really hope Adobe are listening...

DMS with varient configuration

hi all,
I am using the varient configuration in SAP , what we want that based on the characteristic value system should select the document , I don't know how to go about it , Please help me !

Dear Amit,
Go to SPRO --> Cross Application Component --> Classification System --> Classes --> Maintain Object Types & Class Types, now in your scenario, you want to use the document in PO but you are using the class type 300 which is for Variant Configuration, so choose the class type 300 and go into details ...check whether the "Document" screen options is selected or not, if not then select that and Save.
I hope this will solve your issue, similarly you can get into class type 48 and check the settings used accordingly.
Reward Points if it helps,
Regards,
N
In case all this sound complicated to you, simply in your document "document type" enter the class type and class..that should also solve your purpose..!!!
Regards,
N
Edited by: Nitesh Nagpal on Jun 10, 2008 11:50 AM

Varient Configuration prod order is not picking the super routing operation

Dear Experts,
In varient configuration,I have maintain Super routing and Super bom for KMET material.While creation of prod order or converting plan order to prod order,Routing is not getting selected.I have maintained dependency and have checked Production sheduling profile,order type and order dependent parameter,all is ok.Even the Super Bom is getting selected after MRP run as per my requirment.
What I am not getting is selection of routing for production order.Can any of the expert help to find the missing link.
Regards,
Rajesh Prasad.

Hi
For material Variant (FERT) production order Routing is not picking?Just check the Selection condition which is assigned to the operation is same as the selction of material variant i.e., Char & Char values has configured in MRP 3 View of Material variant.
Check this and revert back
Regards
Praveen

Error in varient configuration

im getting error in varient configuration.
my main item is cd1
varient color is red, blue, black
im maintaing pr00 for cd1, and va00 for red,blue,black.
whille im creating the sales order ,im getting main material price im not getting varient price
plz give me teh suggestions

Hi ...
Maintain one more characterictic like Zprice and in Addl data give table as SDCOM and field as VKOND and no values, this is characteristics for variant price and include it in the class which u have created earlier.
goto CT04 and goto values .... there select one value eg RED and then goto object dependency and give code as
$self.Zprice = 'A1'
and for all values give it like that..
Now goto VK11 and give VA00 .....
then enter varaitn as A1 and give price
give A2 and give price
like all variants 'A1' etc etc etc which u maintained in object dependency ....
now u can create profile in Cu41 and then run sales order
so what ever u select ...red, blue green etc in order for eg color characterictics .. u have maintained for each value in characteristics .. object dependency .... as $self.Zprice = 'A1', so A1 price maintained in VK11 so if u select Red ... then price from A1 comes ..
same procedure u follow for all values in other characterictics .. with only one characteristics Zprice ... i.e $self.Zprice = 'B1' etc .. and maintain values for B1 etc in Vk11 in Va00.
Reward if useful
Krishna

Interface design in config profile

Hi
After creation of interface design in config profile and I have assigned new tab in cu50 .
But after I have created one sale order , then I removed interface design object from config profile again I maintained same as like before .
But once I changed interface design even though I maintain again which is not updating as like before.
Can you tell me wt should I do for the same?
Regards
Ishikesh

pls close this issue

Is this new interface design right or do I still have some graphic probs ?

Is that interface design right after the last update ?? I think the old onne looked much more clear for a better workflow... this one just looks a little cheap and strange to me ....
brgds
SG

the stripes are supposed to be the "locked" visualtization, but anyhow it locks strange to me .. well i will see ... thank you anyway :-)

Cisco 5508 interface design problem

Cisco 5508 interface design
now i have connect wlc into infra same picture but ap can't register into wlc. How create interface for this diagram. please help me because access switch is unmanage switch i can't config trunk on this.i can install for this solution this isn't ?
thank you for best support.
samy

Why are your AP's on different Vlans?
If you plan to create SSID's on different Vlans then you will need a trunk port to the WLC as the switch needs to pass tagged frames to it and the WLC needs to pass tagged frames back.
Out of interest, you are using a 5508 which is a fairly expensive piece of kit yet you are connecting it to an unmanaged switch. Why?

Interface Design- Varient Configuration

Similar Messages

Maybe you are looking for