Interface e1000g0 not showing in running state

Hello all,
I have a sun server SunOS PNR1RAD01 5.10 Generic_144488-09 sun4v sparc SUNW,Netra-T5220 where i have an interface e100g0.
This was earlier in running state but now this doesnt show running state. I tried to reset the interface, checked the cable but it did not help.
Can nyone pls help me on this.
e1000g0: flags=1000803<UP,BROADCAST,MULTICAST,IPv4> mtu 1500 index 2
inet 10.200.2.73 netmask fffffff8 broadcast 10.200.2.79
ether 0:21:28:bd:55:3e

see the below printout from the system:
ossuser@PNR1RAD01 # cat hostname.e1000g0
PNR1RAD01
ossuser@PNR1RAD01 # cat hostname.e1000g1
10.200.3.58
root@PNR1RAD01 # cat /etc/hosts
# Internet host table
127.0.0.1 localhost
::1 localhost
10.200.2.73 PNR1RAD01 loghost
10.200.3.58 PNR1RAD01
One more observation:
root@PNR1RAD01 # dladm show-dev
**e1000g0 link: down speed: 0 Mbps duplex: half**
e1000g1 link: up speed: 1000 Mbps duplex: full
e1000g2 link: unknown speed: 0 Mbps duplex: half
e1000g3 link: unknown speed: 0 Mbps duplex: half

Similar Messages

Menu not showing - Process external statement.

Hi
am using the superuser manager login, In banking modules, banks and external reconcilation, process external statement will come. its coming other professional user login, but its not showing in manager super user login.
What will be the issue.
Regards
Sundaram

Hi Sundaram,
Go to Tools -> Click Form Setting AND
Click Banking Module -> Bank Statements and Reconciliations ->(Select) Process External Bank Statement
Thanks,
Madhan.

Mail does not show as running nor is it displayed in Cmd-Tab rotation

I know that with Lion, the idea was that it shouldn't matter to the user if a program is currently running or not. So the blue dot in the dock was by default off. A lot of beta testers complained and the option to turn it back on was included. Somewhere in the last few months, Lion updates have changed something behind my back. When I run Mail, the dock blue light never shows even though it does for programs not provided by Apple. But Mail, Safari, iCal, and probably others do not show the blue dot when running. (BTW, in case you haven't read clearly what I wrote, since non-Apple dock icons show the blue dot, it means i HAVE SET THE SHOW INDICATOR lights option in Settings / Dock.)
What is far far worse is that when I press Cmd-Tab, none of these Apple programs (standard programs installed with OS X or programs from iWork or Aperture) are displayed in the cycle of programs I may switch among! I now must either click on the dock Icon with a MOUSE (extra hand movement) or click on a part of ghe window again with a Mouse. While I use the mouse a lot, having many years of pre GUI experience with only a keyboard, I developed a style of minimal movement. If my hands are on the keyboard, I don't want to pick up the mmouse unless there is no other way. Similarly if I'm using the mouse I don't want to go to the keyboard except for a good cause. Up until now, I've been able to do this with OS X (or dare I say with Windows). I've used a version of Mountain Lion and don't recal seeing this issue.
I have looked through out the setttings pages and tried preferences in each Apple application and I cannot find an option to re-enable the proper behavior of Cmd-Tab. Anyone know a way to fix this?
Thanks,

Some info regarding IMAP
http://support.apple.com/kb/PH2585
http://email.cityu.edu.hk/faq/popimap.htm
http://help.yahoo.com/kb/index?page=content&id=SLN3769&locale=en_US&y=PROD_MAIL_ ML
http://techchannel.radioshack.com/difference-between-imap-pop-account-apple-mail -2189.html
It is a newer protocol for mail, almost every provider has switched to it, and POP is virtually gone. It helps in syncing across multiple devices, and everything happens at the server (for the most part) at first you will see lots of activity that you will not recognize, but in time it seems to calm down and you will become used to it. When I first switched I thought I was going to lose my mind..be patient, it has become much better after some time As long as you get your mails, you may see some syncing occurring, not to worry.
Also you can contact your email provider for further info as to how "they do it"(some set-ups are different for each provider) and if there are settings that you may want to use to make it more to your liking.
Hope you find some help here

Privilege command: the show run does not show the running-config

Hi,
Whenever I login using "user1" I can successfully authenticate however when I ussue the show run for user1. The only thing that I can see are the following:
R4#show run
Building configuration...
Current configuration : 13 bytes
end
R4#
I have put the command on the router as follows:
~~~~~~~~~~~~~~~~~~~~~
aaa new-model
aaa authentication login ACS group tacacs+ local
aaa authentication login NO-AUTH none
aaa authorization exec ACS group tacacs+ local
aaa authorization exec NO-AUTH none
aaa authorization commands 1 ACS-1 group tacacs+ local
aaa authorization commands 1 NO-AUTH none
aaa authorization commands 10 ACS-10 group tacacs+ local
aaa authorization commands 10 NO-AUTH none
aaa authorization commands 15 ACS-15 group tacacs+ local
aaa authorization commands 15 NO-AUTH none
username user2 privilege 15 password xxx
username user1 privilege 10 password xxx
tacacs-server host 10.50.31.6
tacacs-server directed-request
tacacs-server key xxx
privilege exec level 15 show
privilege exec level 10 show running-config
line con 0
exec-timeout 1000 0
authorization commands 1 NO-AUTH
authorization commands 10 NO-AUTH
authorization commands 15 NO-AUTH
authorization exec NO-AUTH
login authentication NO-AUTH
line aux 0
authorization commands 1 NO-AUTH
authorization commands 10 NO-AUTH
authorization commands 15 NO-AUTH
authorization exec NO-AUTH
login authentication NO-AUTH
line vty 0 4
authorization commands 1 ACS-1
authorization commands 10 ACS-10
authorization commands 15 ACS-15
authorization exec ACS
login authentication ACS
end
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Regards,
Lorenz

Lorenz
I believe that the answer is that in implementing privilege levels Cisco designed the show run command so that if you do not have capability to change something that it will not show up in the show run. I believe the logic is that from a security standpoint if you are not authorized to change it you should not be able to see it in the config. So in your case if user1 is not able to change anything then they will not be able to see anything in show run.
HTH
Rick

Watch/Monitor Buttons do not show the correct state

I programmed several Watch buttons on SPA500 module and some buttons stay lit red even though the phones are not used. When pressing the button it does call the Vacant phone.
How can I fix the state to be correct and only be lit red when the corrsponding phone is used?

Hi Guys,
Was this problem ever resolved?
I am having the same issue. Cisco CME on 2851 router. We have several Cisco 7970 IP Phones all provisioned at the same time, and all working fine. I have a 7914 module monitoring the phones and one is showing as off hook. (BLF -1).
The phone that is showing offhook is ephone 7, it is being monitored by ephone 4. I have done factory reset, firmware upgrade, reset and everything recommended above but still having the issue. The red light indicates that the phone is offhook or not present although it is cleary registered to the CME.
You can see from the show ephone register below (ephone 4 is monitoring ephone 7) that ephone 7 is showing as offhook when it is not and is also registered and working. It shows:
button 33: cw:1 ccw:(0 0)
dn 22 number 122 CH1   IDLE         CH2   IDLE         watch(BLF on phone -1) shared with monitor-ring
I have attached config and tftp debug below. If any one can shed some light it would be much appreciated.
------------------ show running-config ------------------
Building configuration...
Current configuration : 33299 bytes
! Last configuration change at 18:09:53 AEST Mon Jun 4 2012
! NVRAM config last updated at 18:09:56 AEST Mon Jun 4 2012
! NVRAM config last updated at 18:09:56 AEST Mon Jun 4 2012
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname CISCO
boot-start-marker
boot system flash:c2800nm-adventerprisek9-mz.151-4.M1.bin
boot-end-marker
card type t1 0 0
! card type command needed for slot/vwic-slot 0/1
enable password
aaa new-model
aaa authentication login ciscocp_vpn_xauth_ml_1 local
aaa authorization exec default local
aaa authorization network ciscocp_vpn_group_ml_1 local
aaa session-id common
clock timezone AEST 10 0
no network-clock-participate wic 0
dot11 syslog
no ip source-route
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 10.0.0.1 10.0.0.199
ip dhcp pool cisco
network 10.0.0.0 255.255.255.0
option 150 ip 10.0.0.1
default-router 10.0.0.138 10.0.0.1
dns-server x.x.x.x x.x.x.x
ip name-server x.x.x.x
ip name-server x.x.x.x
no ipv6 cef
multilink bundle-name authenticated
password encryption aes
voice service voip
ip address trusted list
ipv4 204.9.161.164
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
no supplementary-service sip moved-temporarily
no supplementary-service sip refer
h323
vpn-group 1
vpn-gateway 1 http://10.0.0.15
vpn-trustpoint 1 trustpoint _Certificate leaf
vpn-hash-algorithm sha-1
vpn-profile 1
host-id-check disable
sip
registrar server expires max 3600 min 3600
localhost dns:sip.skype.com
voice class codec 1
codec preference 1 g711ulaw
voice class permanent 1
signal timing oos restart 50000
signal timing oos timeout disabled
signal keepalive disabled
signal sequence oos no-action
voice class custom-cptone telstra
dualtone disconnect
frequency 425
cadence 375 375
voice class custom-cptone conference
dualtone conference
frequency 600 900
cadence 300 150 300 100 300 50
voice class custom-cptone jointone
dualtone conference
frequency 600 900
cadence 300 150 300 100 300 50
voice class custom-cptone leavetone
dualtone conference
frequency 400 800
cadence 400 100 200 100 200 100
voice register global
mode cme
source-address 10.0.0.1 port 5060
max-dn 25
max-pool 25
authenticate register
timezone 47
hold-alert
mwi stutter
voicemail 999
tftp-path flash:
create profile sync 0007934814052285
voice register dn 1
number 201
name B iPhone
no-reg
label 201
voice register dn 2
number 202
name D iPhone
no-reg
label 202
voice register dn 3
number 203
name C iPhone
no-reg
label 203
voice register dn 4
number 204
name K iPad
no-reg
label 204
voice register pool 1
registration-timer max 720 min 660
id mac 50EA.D669.27A3
session-transport tcp
type CiscoMobile-iOS
number 1 dn 1
dtmf-relay rtp-nte
username user201 password 201
no vad
voice register pool 2
registration-timer max 720 min 660
id mac 148F.C646.6CFA
session-transport tcp
type CiscoMobile-iOS
number 1 dn 2
dtmf-relay rtp-nte
username user202 password 202
no vad
voice register pool 3
registration-timer max 720 min 660
id mac DC2B.6198.4F3D
session-transport tcp
type CiscoMobile-iOS
number 1 dn 3
dtmf-relay rtp-nte
username user203 password 203
no vad
voice register pool 4
registration-timer max 720 min 660
id mac 70DE.E239.73B8
session-transport tcp
type CiscoMobile-iOS
number 1 dn 4
dtmf-relay rtp-nte
username user204 password 204
no vad
voice translation-rule 1
rule 1 /$.*$/ /100/
voice translation-rule 2
rule 1 /^.*/ /xxxxxxxxxxxxxx/
voice translation-rule 3
rule 1 /617xxxxxxxx/ /130/
voice translation-rule 4
rule 1 /^004$........$/ /614\1/
rule 2 /^099$.*$/ /\1/
rule 3 /^0$.*$/ /\1/
voice translation-rule 5
rule 1 /617xxxxxxxx/ /130/
rule 2 /$.*$/ /100/
voice translation-profile INBOUND
translate called 5
voice translation-profile PSTN_Outbound
translate calling 2
translate called 4
voice translation-profile SKYPE_IN
translate called 3
voice-card 0
dspfarm
dsp services dspfarm
interface Loopback0
ip address 11.1.1.1 255.255.255.255
h323-gateway voip interface
h323-gateway voip bind srcaddr 11.1.1.1
interface Loopback2
ip address 10.10.10.10 255.255.255.0
interface Tunnel1
no ip address
interface GigabitEthernet0/0
description ETH-LAN
ip address 10.0.0.1 255.255.255.0
ip nat inside
ip virtual-reassembly in
duplex auto
speed auto
no cdp enable
no mop enabled
interface GigabitEthernet0/1
description $ETH-LAN$
ip address 192.168.0.1 255.255.255.0
ip access-group 2 in
duplex auto
speed auto
no cdp enable
interface Service-Engine1/0
ip unnumbered GigabitEthernet0/0
service-module ip address 10.0.0.20 255.255.255.0
service-module ip default-gateway 10.0.0.1
no cdp enable
interface Virtual-Template1 type tunnel
ip unnumbered GigabitEthernet0/0
tunnel mode ipsec ipv4
tunnel protection ipsec profile CiscoCP_Profile1
interface Virtual-Template2
ip unnumbered Loopback2
interface Vif1
ip address 192.168.11.1 255.255.255.252
ip pim dense-mode
ip local pool SDM_POOL_1 10.0.0.75 10.0.0.95
ip local pool SDM_POOL_2 10.1.0.2 10.1.0.50
ip local pool SDM_POOL_3 192.168.1.50 192.168.1.60
no ip forward-protocol nd
ip http server
ip http authentication local
no ip http secure-server
ip http path flash:gui
ip flow-export destination 10.0.0.239 2055
ip nat inside source list VPNAccess interface GigabitEthernet0/0 overload
ip route 0.0.0.0 0.0.0.0 10.0.0.138
ip access-list standard public
ip access-list extended VPNAccess
remark Allow VPN clients to access LAN
remark CCP_ACL Category=2
remark Allow CPN local LAN
permit ip 192.168.1.0 0.0.0.255 any
access-list 100 remark CCP_ACL Category=4
access-list 100 permit ip 10.0.0.0 0.0.0.255 any
no cdp run
tftp-server flash:term70.default.loads
tftp-server flash:term71.default.loads
tftp-server flash:apps70.8-3-0-50.sbn
tftp-server flash:cnu70.8-3-0-50.sbn
tftp-server flash:cvm70sccp.8-3-0-50.sbn
tftp-server flash:dsp70.8-3-0-50.sbn
tftp-server flash:jar70sccp.8-3-0-50.sbn
tftp-server flash:S00105000300.sbn
tftp-server flash:SCCP70.8-3-1S.loads
tftp-server flash:XMLDefault.cnf.xml
tftp-server flash:United_States/g3-tones.xml
tftp-server flash:English_United_States/td-sccp.jar
tftp-server flash:English_United_States/ipc-sccp.jar
tftp-server flash:P00308000600.bin
tftp-server flash:P00308000600.sb2
tftp-server flash:P00308000600.loads
tftp-server flash:P00308000600.sbn
tftp-server flash:apps70.8-4-1-23.sbn
tftp-server flash:cnu70.8-4-1-23.sbn
tftp-server flash:cvm70sccp.8-4-1-23.sbn
tftp-server flash:dsp70.8-4-1-23.sbn
tftp-server flash:jar70sccp.8-4-1-23.sbn
tftp-server flash:SCCP70.8-4-2S.loads
tftp-server flash:S00105000400.sbn
tftp-server flash:RingList.xml
tftp-server flash:DistinctiveRingList.xml
tftp-server flash:Ring1.raw
tftp-server flash:Ring2.raw
tftp-server flash:Ring3.raw
tftp-server flash:apps70.9-0-3TH1-22.sbn
tftp-server flash:cnu70.9-0-3TH1-22.sbn
tftp-server flash:cvm70sccp.9-0-3TH1-22.sbn
tftp-server flash:dsp70.9-0-3TH1-22.sbn
tftp-server flash:jar70sccp.9-0-3TH1-22.sbn
tftp-server flash:SCCP70.9-0-3S.loads
tftp-server flash:apps45.9-0-3TH1-22.sbn
tftp-server flash:cnu45.9-0-3TH1-22.sbn
tftp-server flash:cvm45sccp.9-0-3TH1-22.sbn
tftp-server flash:dsp45.9-0-3TH1-22.sbn
tftp-server flash:jar45sccp.9-0-3TH1-22.sbn
tftp-server flash:SCCP45.9-0-3S.loads
tftp-server flash:term65.default.loads
tftp-server flash:term45.default.loads
tftp-server flash:cmterm_7936.3-3-21-0.bin
control-plane
voice-port 0/2/0
supervisory disconnect dualtone mid-call
supervisory custom-cptone telstra
no battery-reversal
cptone AU
timeouts interdigit 5
timeouts call-disconnect 2
timeouts wait-release 2
timing hookflash-out 250
impedance complex1
caller-id enable
voice-port 0/2/1
supervisory disconnect dualtone mid-call
supervisory custom-cptone telstra
no battery-reversal
cptone AU
timeouts interdigit 5
timeouts call-disconnect 2
timeouts wait-release 2
timing hookflash-out 250
impedance complex1
caller-id enable
voice-port 0/2/2
supervisory disconnect dualtone mid-call
supervisory custom-cptone telstra
no battery-reversal
cptone AU
timeouts interdigit 5
timeouts call-disconnect 2
timeouts wait-release 2
timing hookflash-out 250
impedance complex1
caller-id enable
voice-port 0/2/3
supervisory disconnect dualtone mid-call
supervisory custom-cptone telstra
no battery-reversal
cptone AU
timeouts interdigit 5
timeouts call-disconnect 2
timeouts wait-release 2
timing hookflash-out 250
impedance complex1
caller-id enable
voice-port 0/3/0
auto-cut-through
voice-port 0/3/1
mgcp profile default
sccp local GigabitEthernet0/0
sccp ccm 10.0.0.1 identifier 1 version 7.0
sccp
sccp ccm group 1
bind interface GigabitEthernet0/0
associate ccm 1 priority 1
associate profile 1 register confdsp1
keepalive retries 5
dspfarm profile 1 conference
codec g711ulaw
codec g729br8
codec g729r8
codec g711alaw
codec g729ar8
codec g729abr8
maximum conference-participants 16
maximum sessions 3
conference-join custom-cptone jointone
conference-leave custom-cptone leavetone
associate application SCCP
dial-peer voice 1 pots
translation-profile incoming INBOUND
preference 3
destination-pattern 0T
direct-inward-dial
port 0/2/0
dial-peer voice 2 pots
translation-profile incoming INBOUND
preference 2
destination-pattern 0T
direct-inward-dial
port 0/2/1
dial-peer voice 3 pots
translation-profile incoming INBOUND
preference 1
destination-pattern 0T
direct-inward-dial
port 0/2/2
dial-peer voice 4 pots
shutdown
port 0/2/3
dial-peer voice 10 voip
destination-pattern 99.
session protocol sipv2
session target ipv4:10.0.0.20
incoming called-number .
dtmf-relay cisco-rtp
codec g711ulaw
no vad
dial-peer voice 100 voip
description **Incoming Call from Skype SIP Trunk**
translation-profile incoming SKYPE_IN
session protocol sipv2
session target sip-server
incoming called-number .%
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
dial-peer voice 101 voip
description **Outgoing Call from Skype SIP Trunk**
translation-profile outgoing PSTN_Outbound
destination-pattern 004........
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
dial-peer voice 5 pots
description **Outgoing Mobile Failover**
preference 4
destination-pattern *04........
direct-inward-dial
port 0/2/2
dial-peer voice 102 voip
description **Outgoing Call to Skype - THAILAND**
translation-profile outgoing PSTN_Outbound
destination-pattern 066.........
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
dial-peer voice 103 voip
description **Outgoing Call to Skype - UK**
translation-profile outgoing PSTN_Outbound
destination-pattern 044..........
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
dial-peer voice 104 voip
description **Outgoing Call to Skype - Internat-ALL**
translation-profile outgoing PSTN_Outbound
destination-pattern 099T
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
dial-peer voice 700 voip
destination-pattern 70.
session protocol sipv2
session target ipv4:10.0.0.20
dtmf-relay sip-notify
codec g711ulaw
no vad
dial-peer voice 712 voip
destination-pattern A712
session protocol multicast
session target ipv4:237.111.0.0:22222
voice-class permanent 1
dtmf-relay cisco-rtp
codec g711ulaw
vad aggressive
dial-peer voice 713 voip
destination-pattern A713
session protocol multicast
session target ipv4:237.111.0.1:22222
voice-class permanent 1
dtmf-relay cisco-rtp
codec g711ulaw
vad aggressive
dial-peer voice 70 pots
preference 1
destination-pattern 712
dial-peer voice 71 pots
preference 2
destination-pattern 712
dial-peer voice 72 pots
preference 3
destination-pattern 712
sip-ua
credentials username xxxxxxxxxxxxxx password 7 realm sip.skype.com
authentication username xxxxxxxxxxxxxx password 7
no remote-party-id
retry invite 2
retry register 10
registrar dns:sip.skype.com expires 3600
sip-server dns:sip.skype.com
host-registrar
telephony-service
sdspfarm conference mute-on 111 mute-off 222
sdspfarm units 3
sdspfarm tag 1 confdsp1
conference hardware
video
authentication credential xxxxx xxxxx
xml user xxxxx password xxxxx 15
max-ephones 96
max-dn 110 no-reg
ip source-address 10.0.0.1 port 2000
auto assign 1 to 24
service phone videoCapability 1
timeouts interdigit 5
system message xxxxx Pty Ltd
url directories http://10.0.0.1:80/localdirectory
url services http://10.0.0.20/voiceview/common/login.do
url authentication http://10.0.0.1/CCMCIP/authenticate.asp
cnf-file perphone
load 7914 S00105000400
load 7936 cmterm_7936.3-3-21-0
load 7960-7940 P00308000600
load 7965 term65.default
load 7970 term70.default
time-zone 47
time-format 24
date-format dd-mm-yy
live-record 998
voicemail 999
max-conferences 3 gain -6
call-park system application
moh music-on-hold.au
web admin system name xxxxx secret 5 xxxxxxxxxxxxxxxx
dn-webedit
time-webedit
transfer-system full-consult
transfer-pattern 0
transfer-pattern 2..
transfer-pattern 7..
secondary-dialtone 0
directory entry 1 100 name Reception
fac standard
create cnf-files version-stamp 7960 Jun 04 2012 17:24:26
ephone-template 1
url services 2 http://xxxxxxlawyers.com/phone/xmldir/PhoneUI/ xxxxxxLawyers_DIRECTORY
url services 3 http://jivait.com/phone/rss2cisco.pl NEWS@
park reservation-group 1
softkeys idle Dnd Newcall Gpickup Pickup Cfwdall Redial ConfList Join RmLstC Login
softkeys seized Callback Cfwdall Endcall Gpickup HLog Meetme Pickup Redial
softkeys connected Hold Endcall Trnsfer Park TrnsfVM Confrn ConfList Select Join Acct LiveRcd Flash
ephone-template 2
url services 2 http://phone-xml.berbee.com/menu.xml TEST
ephone-template 3
park reservation-group 1
softkeys idle Dnd Newcall Gpickup Pickup Cfwdall Redial Login
softkeys seized Callback Cfwdall Endcall Gpickup HLog Meetme Pickup Redial
softkeys connected Hold Endcall Trnsfer Park TrnsfVM Confrn ConfList Join
ephone-template 4
park reservation-group 1
softkeys seized Meetme Gpickup Pickup Redial
softkeys connected Hold Trnsfer Park LiveRcd Endcall Confrn ConfList Select Join Acct
ephone-dn 1 dual-line
number 100 no-reg primary
pickup-group 1
label xxxxx xxxxx
name Reception
call-forward noan 999 timeout 40
huntstop channel
no huntstop
ephone-dn 2 dual-line
number 100 no-reg primary
pickup-group 1
label xxxxx xxxxx
name Reception2
preference 1
call-forward noan 999 timeout 40
huntstop channel
no huntstop
ephone-dn 3 dual-line
number 100 no-reg primary
pickup-group 1
label xxxxx xxxxx
name Reception3
preference 2
call-forward noan 999 timeout 40
huntstop channel
no huntstop
ephone-dn 4 dual-line
number 100 no-reg primary
pickup-group 1
label xxxxx xxxxx
name Reception4
preference 3
call-forward busy 999
call-forward noan 999 timeout 40
huntstop channel
ephone-dn 9 dual-line
number 130 secondary 617xxxxxxxx no-reg both
pickup-group 1
label Private Line (07 xxxx xxxx)
description 07 xxxx xxxx
name Skype1
ephone-dn 10 dual-line
number 101 no-reg primary
pickup-group 1
label Ben xxxxxx (101)
description Extension 101
name Ben xxxxxx
call-forward busy 999
call-forward noan 999 timeout 25
ephone-dn 11 dual-line
number 102 no-reg primary
pickup-group 1
label Drew xxxxx (102)
description Extension 102
name Drew xxxxx
call-forward busy 999
call-forward noan 999 timeout 25
ephone-dn 12 dual-line
number 103 no-reg primary
pickup-group 1
label xxxxx xxxxxx (103)
description Extension 103
name xxxxx xxxxxx
call-forward busy 999
call-forward noan 999 timeout 25
ephone-dn 13 dual-line
number 104 no-reg primary
pickup-group 1
label Dennis xxxxx (104)
description Extension 104
name Dennis xxxxx
call-forward busy 999
call-forward noan 999 timeout 25
ephone-dn 14 dual-line
number 105 no-reg primary
pickup-group 1
label Meeting Room (105)
description Extension 105
name Meeting Room
call-forward busy 999
call-forward noan 999 timeout 25
ephone-dn 15 dual-line
number 106 no-reg primary
pickup-group 1
label Front Desk
description Extension 106
name Front Desk
call-forward busy 100
call-forward noan 100 timeout 45
ephone-dn 16 dual-line
number 107 no-reg primary
pickup-group 1
label Server
description Extension 107
name Server
call-forward busy 100
call-forward noan 100 timeout 45
ephone-dn 19 dual-line
number 119 no-reg primary
pickup-group 1
label Cordless
description Extension 119
name Cordless
call-forward busy 100
call-forward noan 100 timeout 30
ephone-dn 20 dual-line
number 121 no-reg primary
pickup-group 1
label Front Reception
description Extension 121
name Front Reception
call-forward busy 999
call-forward noan 999 timeout 25
ephone-dn 21 dual-line
number 120 no-reg primary
pickup-group 1
label Conference Phone
description Extension 120
name Conference Phone
call-forward busy 999
call-forward noan 999 timeout 25
ephone-dn 22 dual-line
number 122 no-reg primary
pickup-group 1
label Reception
description Extension 122
name Reception
call-forward busy 999
call-forward noan 999 timeout 25
ephone-dn 25 dual-line
number 126 no-reg primary
pickup-group 1
label xxxxxx SoftPhone
description Extension 126
name SoftPhone1
ephone-dn 51
number 151 no-reg primary
label Line-1(5288)-Monitor ONLY
trunk 1 monitor-port 0/2/0
ephone-dn 52
number 152 no-reg primary
label Line-2(5232)-Monitor ONLY
trunk 1 monitor-port 0/2/1
ephone-dn 53
number 153 no-reg primary
label Line-3(5404)-Monitor ONLY
trunk 1 monitor-port 0/2/2
ephone-dn 98
number 998 no-reg primary
call-forward all 999
ephone 1
device-security-mode none
video
mac-address 0018.73E2.34D9
ephone-template 1
username "user1" password xxxxxx
paging-dn 32
type 7970 addon 1 7914
button 1o1,2,3,4 2:51 3:52 4:53
button 5:54 6m90 7m91 8m92
button 9w10 10w11 11w12 12w13
button 13w14 16:41 17:43 18:45
ephone 2
device-security-mode none
video
mac-address 000A.B84C.483F
ephone-template 1
username "user2" password xxxxxx
paging-dn 32
type 7970
button 1:10 2:9 3:42 4m90
button 5m91
ephone 3
device-security-mode none
video
mac-address 0019.2FE3.95A1
ephone-template 1
username "user3" password xxxxxx
fastdial 1 00413093639 name Catherine
fastdial 2 00432030586 name Ben
paging-dn 32
type 7970
button 1:11 3w10 4w13 5m90
button 6m91 7:46
ephone 4
device-security-mode none
video
mac-address 0019.2FE3.94F6
ephone-template 1
username "user4" password xxxxxx
speed-dial 1 00408760740 label "IT Support"
paging-dn 32
type 7970 addon 1 7914 2 7914
button 1:12 2:9 3o1,2,3,4 9:51
button 10:52 11:53 12:54 15m90
button 16m91 17m92 23:41 24:43
button 25:45 29w10 30w11 31w13
button 32w14 33w22 34w19 35:21
ephone 5
device-security-mode none
mac-address 0019.2FB9.CA32
ephone-template 1
username "user5"
paging-dn 32
type 7970
button 1:13 2:44 3m90 4m91
ephone 6
device-security-mode none
mac-address 000A.B84C.4598
ephone-template 1
username "user6"
paging-dn 32
type 7970
button 1:14 2m90
ephone 7
device-security-mode none
mac-address 0018.73E2.369B
ephone-template 1
username "user7"
paging-dn 32
type 7970
button 1o1,2,3,4 2:22
ephone 8
device-security-mode none
mac-address 0015.5832.54A3
ephone-template 2
type CIPC
button 1:25 2m1
line con 0
exec-timeout 0 0
line aux 0
line 66
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
line vty 0 4
exec-timeout 0 0
password
transport input all
scheduler allocate 20000 1000
ntp master
ntp update-calendar
ntp server 150.101.221.106
webvpn gateway gateway_1
ip address 10.0.0.15 port 443
http-redirect port 80
ssl trustpoint TP-self-signed-1560239260
inservice
webvpn install svc flash:/webvpn/anyconnect-win-3.0.3054-k9.pkg sequence 1
end
============================================================================
Jun 5 00:28:44.922: TFTP: Looking for term70.default.loads
Jun 5 00:28:44.922: TFTP: Opened flash:term70.default.loads, fd 2, size 660 for process 314
Jun 5 00:28:44.930: TFTP: Finished flash:term70.default.loads, time 00:00:00 for process 314
Jun 5 00:28:46.054: TFTP: Looking for jar70sccp.9-0-3TH1-22.sbn
Jun 5 00:28:46.058: TFTP: Opened flash:jar70sccp.9-0-3TH1-22.sbn, fd 2, size 1828680 for process 314
Jun 5 00:28:52.018: TFTP: Finished flash:jar70sccp.9-0-3TH1-22.sbn, time 00:00:05 for process 314
Jun 5 00:28:57.490: TFTP: Looking for cnu70.9-0-3TH1-22.sbn
Jun 5 00:28:57.490: TFTP: Opened flash:cnu70.9-0-3TH1-22.sbn, fd 2, size 506761 for process 314
Jun 5 00:28:59.134: TFTP: Finished flash:cnu70.9-0-3TH1-22.sbn, time 00:00:01 for process 314
Jun 5 00:29:01.242: TFTP: Looking for apps70.9-0-3TH1-22.sbn
Jun 5 00:29:01.246: TFTP: Opened flash:apps70.9-0-3TH1-22.sbn, fd 2, size 3084262 for process 314
Jun 5 00:29:07.243: %IPPHONE-6-UNREGISTER_ABNORMAL: ephone-7:SEP001873E2369B IP:10.0.0.204 Socket:11 DeviceType:Phone has unregistered abnormally.
Jun 5 00:29:11.219: TFTP: Finished flash:apps70.9-0-3TH1-22.sbn, time 00:00:09 for process 314
Jun 5 00:29:19.791: TFTP: Looking for dsp70.9-0-3TH1-22.sbn
Jun 5 00:29:19.791: TFTP: Opened flash:dsp70.9-0-3TH1-22.sbn, fd 2, size 540433 for process 314
Jun 5 00:29:21.559: TFTP: Finished flash:dsp70.9-0-3TH1-22.sbn, time 00:00:01 for process 314
Jun 5 00:29:23.619: TFTP: Looking for cvm70sccp.9-0-3TH1-22.sbn
Jun 5 00:29:23.623: TFTP: Opened flash:cvm70sccp.9-0-3TH1-22.sbn, fd 2, size 2166976 for process 314
Jun 5 00:29:30.807: TFTP: Finished flash:cvm70sccp.9-0-3TH1-22.sbn, time 00:00:07 for process 314
Jun 5 00:31:07.536: TFTP: Looking for CTLSEP001873E2369B.tlv
Jun 5 00:31:07.636: TFTP: Looking for ITLSEP001873E2369B.tlv
Jun 5 00:31:07.748: TFTP: Looking for ITLFile.tlv
Jun 5 00:31:08.004: TFTP: Looking for SEP001873E2369B.cnf.xml
Jun 5 00:31:08.004: TFTP: Opened system:/its/vrf1/SEP001873E2369B.cnf.xml, fd 2, size 1543 for process 314
Jun 5 00:31:08.012: TFTP: Finished system:/its/vrf1/SEP001873E2369B.cnf.xml, time 00:00:00 for process 314
Jun 5 00:31:14.424: TFTP: Looking for English_United_States/td-sccp.jar
Jun 5 00:31:14.428: TFTP: Opened flash:English_United_States/td-sccp.jar, fd 2, size 67385 for process 314
Jun 5 00:31:14.756: TFTP: Finished flash:English_United_States/td-sccp.jar, time 00:00:00 for process 314
Jun 5 00:31:15.480: TFTP: Looking for United_States/g3-tones.xml
Jun 5 00:31:15.480: TFTP: Opened flash:United_States/g3-tones.xml, fd 2, size 1036 for process 314
Jun 5 00:31:15.488: TFTP: Finished flash:United_States/g3-tones.xml, time 00:00:00 for process 314
Jun 5 00:31:31.604: %IPPHONE-6-REG_ALARM: 25: Name=SEP001873E2369B Load= term70.default Last=Initialized
Jun 5 00:31:31.652: %IPPHONE-6-REGISTER: ephone-7:SEP001873E2369B IP:10.0.0.204 Socket:11 DeviceType:Phone has registered.
Jun 5 00:31:33.228: %IPPHONE-6-UNREGISTER_NORMAL: ephone-7:SEP001873E2369B IP:10.0.0.204 Socket:11 DeviceType:Phone has unregistered normally.
Jun 5 00:32:34.333: TFTP: Looking for CTLSEP001873E2369B.tlv
Jun 5 00:32:34.413: TFTP: Looking for ITLSEP001873E2369B.tlv
Jun 5 00:32:34.521: TFTP: Looking for ITLFile.tlv
Jun 5 00:32:34.853: TFTP: Looking for SEP001873E2369B.cnf.xml
Jun 5 00:32:34.853: TFTP: Opened system:/its/vrf1/SEP001873E2369B.cnf.xml, fd 2, size 1543 for process 314
Jun 5 00:32:34.861: TFTP: Finished system:/its/vrf1/SEP001873E2369B.cnf.xml, time 00:00:00 for process 314
Jun 5 00:32:39.861: %IPPHONE-6-REG_ALARM: 25: Name=SEP001873E2369B Load= term70.default Last=Initialized
Jun 5 00:32:39.905: %IPPHONE-6-REGISTER: ephone-7:SEP001873E2369B IP:10.0.0.204 Socket:13 DeviceType:Phone has registered.
OLSENCISCO#
=====================================================
ephone-1[0] Mac:0018.73E2.34D9 TCP socket:[17] activeLine:0 whisperLine:0 REGISTERED in SCCP ver 19/17 max_streams=5
mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:8
IP:10.0.0.221 * 52191 7970 sub=1 keepalive 2082 max_line 22 available_line 22
Phone reports 22 Available Lines
button 1: cw:1 ccw:(0 0)
dn 1 number 100 CH1   IDLE         CH2   IDLE         overlay shared
button 2: cw:1 ccw:(0)
dn 51 number 151 CH1   IDLE         shared
button 3: cw:1 ccw:(0)
dn 52 number 152 CH1   IDLE         shared
button 4: cw:1 ccw:(0)
dn 53 number 153 CH1   IDLE         shared
button 5: cw:1 ccw:(0)
dn 54 number 154 CH1   IDLE         shared with monitor-ring
button 6: cw:1 ccw:(0)
dn 90 number 300 CH1   IDLE         monitor-ring shared
button 7: cw:1 ccw:(0)
dn 91 number 301 CH1   IDLE         monitor-ring shared
button 8: cw:1 ccw:(0)
dn 92 number 302 CH1   IDLE         monitor-ring shared
button 9: cw:1 ccw:(0 0)
dn 10 number 101 CH1   IDLE         CH2   IDLE         watch(BLF on phone 2) shared with monitor-ring
button 10: cw:1 ccw:(0 0)
dn 11 number 102 CH1   IDLE         CH2   IDLE         watch(BLF on phone 3) shared with monitor-ring
button 11: cw:1 ccw:(0 0)
dn 12 number 103 CH1   IDLE         CH2   IDLE         watch(BLF on phone 4) shared
button 12: cw:1 ccw:(0 0)
dn 13 number 104 CH1   IDLE         CH2   IDLE         watch(BLF on phone 5) shared with monitor-ring
button 13: cw:1 ccw:(0 0)
dn 14 number 105 CH1   IDLE         CH2   IDLE         watch(BLF on phone 6) shared with monitor-ring
button 16: cw:1 ccw:(0)
dn 41 number A501 auto dial A502 CH1   IDLE         shared with monitor-ring
button 17: cw:1 ccw:(0)
dn 43 number A503 auto dial A504 CH1   IDLE         shared with monitor-ring
button 18: cw:1 ccw:(0)
dn 45 number A505 auto dial A506 CH1   IDLE         shared with monitor-ring
FXO Port Monitoring Status
button: 2 dn: 51 FXO Port: 0/2/0 Status: Idle
button: 3 dn: 52 FXO Port: 0/2/1 Status: Idle
button: 4 dn: 53 FXO Port: 0/2/2 Status: Idle
button: 5 dn: 54 FXO Port: 0/2/3 Status: Idle
overlay 1: 1(100) 2(100) 3(100) 4(100)
paging-dn 32
Preferred Codec: g711ulaw
Lpcor Type: none Username: user1 Password:xxxxxxxx
ephone-2[1] Mac:000A.B84C.483F TCP socket:[15] activeLine:0 whisperLine:0 REGISTERED in SCCP ver 19/17 max_streams=5
mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:8
IP:10.0.0.216 * 52908 7970 keepalive 2081 max_line 8 available_line 8
button 1: cw:1 ccw:(0 0)
dn 10 number 101 CH1   IDLE         CH2   IDLE         shared with monitor-ring
button 2: cw:1 ccw:(0 0)
dn 9 number 130 CH1   IDLE         CH2   IDLE         shared
button 3: cw:1 ccw:(0)
dn 42 number A502 auto dial A501 CH1   IDLE
button 4: cw:1 ccw:(0)
dn 90 number 300 CH1   IDLE         monitor-ring shared
button 5: cw:1 ccw:(0)
dn 91 number 301 CH1   IDLE         monitor-ring shared
paging-dn 32
Preferred Codec: g711ulaw
Lpcor Type: none Username: user2 Password: xxxxxxxx
ephone-3[2] Mac:0019.2FE3.95A1 TCP socket:[16] activeLine:0 whisperLine:0 REGISTERED in SCCP ver 19/17 max_streams=5
mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:8
IP:10.0.0.223 * 49428 7970 keepalive 2069 max_line 8 available_line 8
button 1: cw:1 ccw:(0 0)
dn 11 number 102 CH1   IDLE         CH2   IDLE         shared with monitor-ring
button 3: cw:1 ccw:(0 0)
dn 10 number 101 CH1   IDLE         CH2   IDLE         watch(BLF on phone 2) shared with monitor-ring
button 4: cw:1 ccw:(0 0)
dn 13 number 104 CH1   IDLE         CH2   IDLE         watch(BLF on phone 5) shared with monitor-ring
button 5: cw:1 ccw:(0)
dn 90 number 300 CH1   IDLE         monitor-ring shared
button 6: cw:1 ccw:(0)
dn 91 number 301 CH1   IDLE         monitor-ring shared
button 7: cw:1 ccw:(0)
dn 46 number A506 auto dial A505 CH1   IDLE
paging-dn 32
Preferred Codec: g711ulaw
Lpcor Type: none Username: user3 Password: xxxxxxxx
ephone-4[3] Mac:0019.2FE3.94F6 TCP socket:[19] activeLine:0 whisperLine:0 REGISTERED in SCCP ver 19/17 max_streams=5
mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:8
IP:10.0.0.201 * 52711 7970 sub=2 keepalive 2050 max_line 36 available_line 35
Phone reports 35 Available Lines
button 1: cw:1 ccw:(0 0)
dn 12 number 103 CH1   IDLE         CH2   IDLE         shared
button 2: cw:1 ccw:(0 0)
dn 9 number 130 CH1   IDLE         CH2   IDLE         shared
button 3: cw:1 ccw:(0 0)
dn 1 number 100 CH1   IDLE         CH2   IDLE         overlay shared
button 9: cw:1 ccw:(0)
dn 51 number 151 CH1   IDLE         shared
button 10: cw:1 ccw:(0)
dn 52 number 152 CH1   IDLE         shared
button 11: cw:1 ccw:(0)
dn 53 number 153 CH1   IDLE         shared
button 12: cw:1 ccw:(0)
dn 54 number 154 CH1   IDLE         shared with monitor-ring
button 15: cw:1 ccw:(0)
dn 90 number 300 CH1   IDLE         monitor-ring shared
button 16: cw:1 ccw:(0)
dn 91 number 301 CH1   IDLE         monitor-ring shared
button 17: cw:1 ccw:(0)
dn 92 number 302 CH1   IDLE         monitor-ring shared
button 23: cw:1 ccw:(0)
dn 41 number A501 auto dial A502 CH1   IDLE         shared with monitor-ring
button 24: cw:1 ccw:(0)
dn 43 number A503 auto dial A504 CH1   IDLE         shared with monitor-ring
button 25: cw:1 ccw:(0)
dn 45 number A505 auto dial A506 CH1   IDLE         shared with monitor-ring
button 29: cw:1 ccw:(0 0)
dn 10 number 101 CH1   IDLE         CH2   IDLE         watch(BLF on phone 2) shared with monitor-ring
button 30: cw:1 ccw:(0 0)
dn 11 number 102 CH1   IDLE         CH2   IDLE         watch(BLF on phone 3) shared with monitor-ring
button 31: cw:1 ccw:(0 0)
dn 13 number 104 CH1   IDLE         CH2   IDLE         watch(BLF on phone 5) shared with monitor-ring
button 32: cw:1 ccw:(0 0)
dn 14 number 105 CH1   IDLE         CH2   IDLE         watch(BLF on phone 6) shared with monitor-ring
button 33: cw:1 ccw:(0 0)
dn 22 number 122 CH1   IDLE         CH2   IDLE         watch(BLF on phone -1) shared with monitor-ring
button 34: cw:1 ccw:(0 0)
dn 19 number 119 CH1   IDLE         CH2   IDLE         watch(BLF on phone 16) shared with monitor-ring
button 35: cw:1 ccw:(0 0)
dn 21 number 120 CH1   IDLE         CH2   IDLE         shared with monitor-ring
FXO Port Monitoring Status
button: 9 dn: 51 FXO Port: 0/2/0 Status: Idle
button: 10 dn: 52 FXO Port: 0/2/1 Status: Idle
button: 11 dn: 53 FXO Port: 0/2/2 Status: Idle
button: 12 dn: 54 FXO Port: 0/2/3 Status: Idle
overlay 3: 1(100) 2(100) 3(100) 4(100)
speed dial 1:00408760740 IT Support
paging-dn 32
Preferred Codec: g711ulaw
Lpcor Type: none Username: user4 Password: xxxxxxxx
ephone-5[4] Mac:0019.2FB9.CA32 TCP socket:[14] activeLine:0 whisperLine:0 REGISTERED in SCCP ver 19/17 max_streams=5
mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:8
IP:10.0.0.222 * 51034 7970 keepalive 2129 max_line 8 available_line 8
button 1: cw:1 ccw:(0 0)
dn 13 number 104 CH1   IDLE         CH2   IDLE         shared with monitor-ring
button 2: cw:1 ccw:(0)
dn 44 number A504 auto dial A503 CH1   IDLE
button 3: cw:1 ccw:(0)
dn 90 number 300 CH1   IDLE         monitor-ring shared
button 4: cw:1 ccw:(0)
dn 91 number 301 CH1   IDLE         monitor-ring shared
paging-dn 32
Preferred Codec: g711ulaw
Lpcor Type: none Username: user5
ephone-6[5] Mac:000A.B84C.4598 TCP socket:[5] activeLine:0 whisperLine:0 REGISTERED in SCCP ver 19/17 max_streams=5
mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:8
IP:10.0.0.219 * 49291 7970 keepalive 2135 max_line 8 available_line 8
button 1: cw:1 ccw:(0 0)
dn 14 number 105 CH1   IDLE         CH2   IDLE         shared with monitor-ring
button 2: cw:1 ccw:(0)
dn 90 number 300 CH1   IDLE         monitor-ring shared
paging-dn 32
Preferred Codec: g711ulaw
Lpcor Type: none Username: user6
ephone-7[6] Mac:0018.73E2.369B TCP socket:[13] activeLine:0 whisperLine:0 REGISTERED in SCCP ver 19/17 max_streams=5
mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:8
IP:10.0.0.204 * 50084 7970 keepalive 100 max_line 8 available_line 8
button 1: cw:1 ccw:(0 0)
dn 1 number 100 CH1   IDLE         CH2   IDLE         overlay shared
button 2: cw:1 ccw:(0 0)
dn 22 number 122 CH1   IDLE         CH2   IDLE         shared with monitor-ring
overlay 1: 1(100) 2(100) 3(100) 4(100)
paging-dn 32
Preferred Codec: g711ulaw
Lpcor Type: none Username: user7
ephone-11[10] Mac:001F.CA35.5721 TCP socket:[9] activeLine:0 whisperLine:0 REGISTERED in SCCP ver 19/17 max_streams=5
mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:9
IP:10.0.0.77 * 53104 7965 keepalive 1214 max_line 6 available_line 6
button 1: cw:1 ccw:(0 0)
dn 27 number 128 CH1   IDLE         CH2   IDLE
button 2: cw:1 ccw:(0 0)
dn 1 number 100 CH1   IDLE         CH2   IDLE         overlay shared
button 3: cw:1 ccw:(0)
dn 51 number 151 CH1   IDLE         shared
button 4: cw:1 ccw:(0)
dn 52 number 152 CH1   IDLE         shared
button 5: cw:1 ccw:(0)
dn 53 number 153 CH1   IDLE         shared
FXO Port Monitoring Status
button: 3 dn: 51 FXO Port: 0/2/0 Status: Idle
button: 4 dn: 52 FXO Port: 0/2/1 Status: Idle
button: 5 dn: 53 FXO Port: 0/2/2 Status: Idle
overlay 2: 1(100) 2(100) 3(100)
paging-dn 32
Preferred Codec: g711ulaw
Lpcor Type: none Username: user11 Password: xxxxxxxx
ephone-13[12] Mac:000D.BCE9.7533 TCP socket:[1] activeLine:0 whisperLine:0 REGISTERED in SCCP ver 11/9 max_streams=0
mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:8
IP:10.0.0.235 * 50792 Telecaster 7940 keepalive 2143 max_line 2 available_line 2
button 1: cw:1 ccw:(0 0)
dn 15 number 106 CH1   IDLE         CH2   IDLE
button 2: cw:1 ccw:(0 0)
dn 1 number 100 CH1   IDLE         CH2   IDLE         overlay shared
overlay 2: 1(100) 2(100) 3(100) 4(100)
paging-dn 32
Preferred Codec: g711ulaw
Lpcor Type: none Username: user13 Password: xxxxxxxx
ephone-15[14] Mac:0014.6A87.716A TCP socket:[2] activeLine:0 whisperLine:0 REGISTERED in SCCP ver 11/9 max_streams=1
mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:8
IP:10.0.0.236 * 50649 Telecaster 7940 keepalive 2142 max_line 2 available_line 2
button 1: cw:1 ccw:(0 0)
dn 16 number 107 CH1   IDLE         CH2   IDLE
button 2: cw:1 ccw:(0)
dn 90 number 300 CH1   IDLE         monitor-ring shared
paging-dn 32
Preferred Codec: g711ulaw
Lpcor Type: none
ephone-16[15] Mac:0019.55EC.B6FF TCP socket:[7] activeLine:0 whisperLine:0 REGISTERED in SCCP ver 1/1 max_streams=0
mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:7
IP:10.0.0.185 * 10664 ATA Phone keepalive 2139 max_line 1 available_line 0
button 1: cw:1 ccw:(0 0)
dn 19 number 119 CH1   IDLE         CH2   IDLE         shared with monitor-ring
Preferred Codec: g711ulaw
Lpcor Type: none Username: user16 Password: xxxxxxxx
ephone-17[16] Mac:1955.ECB6.FF01 TCP socket:[6] activeLine:0 whisperLine:0 REGISTERED in SCCP ver 1/1 max_streams=0
mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:3
IP:10.0.0.185 * 10663 ATA Phone keepalive 2139 max_line 1 available_line 0
button 1: cw:1 ccw:(0 0)
dn 2 number 100 CH1   IDLE         CH2   IDLE         shared
Preferred Codec: g711ulaw
Lpcor Type: none
ephone-18[17] Mac:001B.2AC6.BE43 TCP socket:[3] activeLine:0 whisperLine:0 REGISTERED in SCCP ver 11/9 max_streams=0
mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:8
IP:10.0.0.77 * 51863 Telecaster 7940 keepalive 1232 max_line 2 available_line 2
button 1: cw:1 ccw:(0 0)
dn 28 number 129 CH1   IDLE         CH2   IDLE
button 2: cw:1 ccw:(0 0)
dn 12 number 103 CH1   IDLE         CH2   IDLE         silent-ring shared
paging-dn 32
Preferred Codec: g711ulaw
Lpcor Type: none
ephone-19[18] Mac:0004.F2E2.43E0 TCP socket:[8] activeLine:0 whisperLine:0 REGISTERED in SCCP ver 4/3 max_streams=0
mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:4
IP:10.0.0.215 * 1038 7936 keepalive 2567 max_line 1 available_line 0
button 1: cw:1 ccw:(0 0)
dn 21 number 120 CH1   IDLE         CH2   IDLE         shared with monitor-ring
Preferred Codec: g711ulaw
Lpcor Type: none

Chart binded data not showing when Window State property of form is set to Maximized

Possible bug?
Using In VS 2013 Community, .NET 4.5, MySQL w/Connector/NET...
When a form is maximized, it wil not render the binded datasource on a chart.
Example is a new project... chart dragged onto a form... add a Dataset when initializing the chart and immediately bind that to the Datasource property with no changes to the chart except changing your XValue from a column to a line type. I only have
3 columns in the table. keyId, entryDate, mcf.
I can also maximize the window after the form is up and running and it doesn't effect the chart at all.
Any ideas? I need the window to run in a maximized state.
Many thanks!

Hi,
to debug your web content in IE
f12>Debug tab, select "Break on all errors"... the debugger will break on any errors.
Emulation tab, tells you which emulation mode the browser is using and which userAgent string it is using.
File>Properties shows which IE security zone it maps to.
"When a form is maximized it will not render the binded datasource on a chart"
Probably you are running from a localhost proxy (http://localhost:8080)... the IE developer tool will show you any scripting errors. Publish your 'test' to a named webserver. eg.
http://localhost/test.local
- Questions about html, css and scripting for website developers. If possible please include with your question a link to your website or a mashup that shows the issue.
Regards.
Rob^_^

When hovering over button text it does not show button rollover state

Hi
I'm new to captivate and I'm looking for some help please. I have created buttons with Adobe Flash and saved them in PNG format, I have created an upState, overState and downState. These are working really well when I use them in Captivate. However when I add text to my buttons and rollover the text the buttons don't change state. They only change state when I hover over the button itself (a bit without the text).
Any help you can give me would be greatly appreciated.
thanks

No, if you cover up with text, and user clicks on text, the rollover state will not function.
I have another work flow for translation (have tutorials in several languages as well). In previous versions I used Photoshop to create buttons, using layers and having the Text layer separately, so that to translate I only needed to change that layer. But I created the regular Captivate buttons (needing three PNG's for 3 states).
In Captivate 6 I have almost replaced all butons by Smart Shapes used as button. Since the double as text containers, translating is now done in Captivate itself. But those shape buttons do not have a rollover functionality, can cope with that, I opt to show the hand cursor.
Really, cannot help you if you want to stick with Flash buttons that have to be layered under a text caption, unless you make the flash button transparent where the Text has to go, so that you can put the text under the Flash button.
Lilybiri

Gui is not showing when running program

This source code compiles with no errors in Borland 9, but when I run it, the GUI doesn't show up. I'm clueless, here is the code:
import java.util.Properties;
import javax.mail.internet.*;
import javax.mail.*;
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
* Title: 
* Description: 
* Copyright: Copyright (c) 2003
* Company: 
* @author not attributable
* @version 1.0
public class SimpleSender{
JPanel jPanel1 = new JPanel();
JButton jButton1 = new JButton();
JButton jButton2 = new JButton();
JLabel jLabel1 = new JLabel();
JLabel jLabel2 = new JLabel();
JLabel jLabel3 = new JLabel();
JLabel jLabel4 = new JLabel();
JTextField jTextField1 = new JTextField();
JTextField jTextField2 = new JTextField();
JTextField jTextField3 = new JTextField();
JTextArea jTextArea1 = new JTextArea();
public SimpleSender() {
 try {
 jbInit();
 catch(Exception e) {
 e.printStackTrace();
private void jbInit() throws Exception {
 jTextArea1.setText("");
 jTextArea1.setLineWrap(true);
 jTextArea1.setWrapStyleWord(true);
 jTextArea1.setBounds(new Rectangle(9, 142, 382, 142));
 jTextField3.setText("");
 jTextField3.setBounds(new Rectangle(56, 99, 170, 22));
 jTextField2.setText("");
 jTextField2.setBounds(new Rectangle(40, 73, 183, 21));
 jTextField1.setText("");
 jTextField1.setBounds(new Rectangle(28, 43, 193, 21));
 jLabel4.setText("MESSAGE:");
 jLabel4.setBounds(new Rectangle(5, 126, 55, 15));
 jLabel3.setText("SUBJECT:");
 jLabel3.setBounds(new Rectangle(5, 102, 51, 15));
 jLabel2.setText("FROM:");
 jLabel2.setBounds(new Rectangle(7, 74, 34, 15));
 jLabel1.setText("TO:");
 jLabel1.setBounds(new Rectangle(9, 45, 20, 15));
 jButton2.setBounds(new Rectangle(88, 6, 77, 25));
 jButton2.setText("RECEIVE");
 jPanel1.setLayout(null);
 jButton1.setBounds(new Rectangle(8, 6, 73, 25));
 jButton1.setText("SEND");
 jButton1.addActionListener(new SimpleSender_jButton1_actionAdapter(this));
 jPanel1.add(jButton1, null);
 jPanel1.add(jButton2, null);
 jPanel1.add(jLabel1, null);
 jPanel1.add(jLabel4, null);
 jPanel1.add(jLabel3, null);
 jPanel1.add(jLabel2, null);
 jPanel1.add(jTextField1, null);
 jPanel1.add(jTextArea1, null);
 jPanel1.add(jTextField2, null);
 jPanel1.add(jTextField3, null);
public void mail() throws Exception {
 Properties props = System.getProperties();
 // Setup mail server
 props.put("mail.smtp.host", "smtp-server.cfl.rr.com");
 // Get session
 Session session = Session.getDefaultInstance(props, null);
 // Define message
 MimeMessage message = new MimeMessage(session);
 // Set the from address
 message.setFrom(new InternetAddress(jTextField2.getText()));
 // Set the to address
 message.addRecipient(Message.RecipientType.TO,
 new InternetAddress(jTextField1.getText()));
 // Set the subject
 message.setSubject(jTextField3.getText());
 // Set the content
 message.setText(jTextArea1.getText());
 // Send message
 Transport.send(message);
void jButton1_actionPerformed(ActionEvent e) {
 try{
 mail();
 }catch(Exception ex){System.out.println("Failed");}
public static void main(String args[]){
 new SimpleSender();
class SimpleSender_jButton1_actionAdapter implements java.awt.event.ActionListener {
SimpleSender adaptee;
SimpleSender_jButton1_actionAdapter(SimpleSender adaptee) {
 this.adaptee = adaptee;
public void actionPerformed(ActionEvent e) {
 adaptee.jButton1_actionPerformed(e);
}

You need to have a JFrame to add your components to.
For example, make your class extend JFrame and set your main panel the ContentPane (assuming that all your components have been added to this panel).
public class SimpleSender extends JFRame {
this.setContentPane(JPanel1);
this.setVisible(true);
}

Microsoft Exchange Transport Service....Starting (Does not reach a running state, stops and tries starting again)

Hi All,
After installing the lovely update (https://technet.microsoft.com/library/security/ms14-068) that Microsoft released last week. I restarted my exchange 2013 server and now the Microsoft Exchange Transport Service will not start. It is pretty much constantly
in a starting state. Tried all the standard stuff, restarting the server etc.
Running on Server 2012 R2
Hopefully someone can shed some light.
Pete

Hi,
A few questions here :
- Have you installed all roles on the same server ? ( MultiRole server )
- If yes, do use the preconfigured receive connectors from Exchange or did you add custom connectors ?
- Do you have any anti-spam service installed on the server that could be listening on port 25 ?

Most of the triggers in my composition are not showing there active state

I have a composition with 18 triggers.
Each trigger has a b/w image that should turn to a colour image when active or rolled over but only the two on the 3rd row work correctly.
The others do change when rolled over but when I roll off, even when still active they go back to their normal state.
Also when the composition plays through only the same two triggers will show the correct active state whilst active.
http://boastassociates08.businesscatalyst.com/projects.html
this happens in all methods of preview.
i have checked and all triggers have the correct images on each state.
Thanks

I figured it out. all trigger also have a link to another page on the site, all but two anyway.
so the triggers states are reacting as if it is just a link rather than it being a trigger in a composition.
does somebody know a way that will allow me to have the triggers states react the way i want and for the triggers to act as a link?

After I close Firefox, then later try to open, message says it is still running. Check app mgr and does not show Firefox running. Try to open again and message says already running.

It seems Firefox keeps running after I close it. When I try to open browser, message says it is running and tells me to close it. I check Task Manager and it does NOT indicate Firefox is running. Unable to open Firefox at all. Have to shut down entire computer and sometimes this works. Anyone have this problem before?

When you go to task manager, go to the "processes" tab, right click on "firefox.exe," and select "end process tree." In the picture I've attached, I'm using windows 8, so the UI is a little different, but I hope it points you in the right direction.

Picture Object in CR XI not showing on run time

Hello.
I made a report design using CR XI, I attached an image using Picture Object and selected the image, It shows in Main Report View but when I run the program and click the button that executes the report, it shows no image.

Ho Bob
See if updating to CR XI R2 will help. This blog has how to.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center
Canada
Follow us on Twitter

Planned total not show even running CJEN ancd CJBN

Dear expert,
Please help me on this.
I have set up the project, wbs elements, budget amount and release amount in the system. Some PM work orders have been assigned with the WBS element. But somehow in CJ33, there is no planned total existed for WBS elements. I have run CJEN and CJBN to recontruct infor database and availability control, but the problem still unresolved.
Is there any step I missed out in order to get the planned total updated in CJ31/33? I even checked on report in CJE0, it has the detail amount for budget, actual, plan column. But no subtotal in WBS element for 'PLAN--year'.
Thanks in advance.
Best regards,
FLL

Hi,
Activate the Appended field in OPSV (check box)for order category 30 .
Muzamil

Telnet into a router, when shut/no shut a interface, does not show syslog (link change, up, down)

but if i use console cable to connect to router, syslog will show up when shut/no shut.
any thought?
i appreciated.

Did you try command 'logging on' ?

Vlan and SSID not showing in AP Web Interface

We have a couple of APs that do not show the Vlans and SSIDs through the AP web interface. If you go to the SSID manager page in web interface, the page comes up but does not show any of the SSIDs configured. The same goes for Services - Vlan. That page comes up but does not show any Vlans configured. If you telnet to the APs, you see the listed mssid and all the SSID interfaces. The SSIDs on the APs are functional and working. This just makes it difficult to use the web interface for these APs. I have tried to compare running configs on APs where web interface is not showing this and on APs that it is showing but cannot see any differences.
Thanks.

Unsupported things are never documented. You can't possibly list all browsers that you don't support.
But if it's not mentionned clearly as supported then it means "it might work but we never tested with it".
Let us know how it goes with the 12.4.21
Nicolas
===
Don't forget to rate answers that you find useful

Interface e1000g0 not showing in running state

Similar Messages

Maybe you are looking for